Need help for the conversion of the nested loops to use the stream

I'm trying to teach me how to effectively use the java stream, but finds it difficult to find the correct syntax for a problem of nested loop. I would like to convert the following code to use the Java 8 stream instead of nested loops.  Can anyone provide an example or a solution?

 /**
     * Return all members of stringListOne that begin with any of the strings in
     * stringListTwo
     *
     * @return all members of stringListOne that begin with any of the strings in
     * stringListTwo
     */
    Set<String> getFilteredStrings(Set<String> stringListOne, Set<String> stringListTwo) {
     
      Set<String> stringListOneFiltered = new HashSet<String>();
      for (String next : stringListOne) {
            for (String nextPrefix : stringListTwo) {
                if (next.startsWith(nextPrefix)) {
                    stringListOneFiltered.add(next);
                }
            }
        }
        return stringListOneFiltered;
    }

Here's a test case for the above code:

/**
     * Test method for {@link scratchpad.MyClass#getFilteredStrings(java.util.Set, java.util.Set)}.
     */
    @Test
    public final void testGetFilteredStrings() {

        MyClass uut = new MyClass();
        
        Set<String> stringListOne = new HashSet<String>();
        stringListOne.add("until");
        stringListOne.add("unite");
        stringListOne.add("under");
        stringListOne.add("prepare");
        stringListOne.add("pretend");
        stringListOne.add("prefix");
        stringListOne.add("prepend");
        stringListOne.add("post");
        stringListOne.add("positive");
        stringListOne.add("postgame");
        stringListOne.add("postpone");       
        
        Set<String> stringListTwo = new HashSet<String>();
        stringListTwo.add("post");
        stringListTwo.add("pre");
        stringListTwo.add("und");
        
        
        Set<String> result= uut.getFilteredStrings(stringListOne, stringListTwo);
        
        System.out.println(result);
        assertEquals(8, result.size());
    }

Thanks for any help you can provide!  I get the hang of using the course of water, but this particular code was difficult.

tmbc

I found the following solution to my question:

GetFilteredStrings (Set stringListOne, the value

{Set stringListTwo)

Predicate startsWith = p-> stringListTwo.stream () .anyMatch (prefix-> p.startsWith (prefix));

Return stringListOne.stream () .filter (startsWith) .collect (Collectors.toSet ());

}

Tags: Java

Similar Questions

  • I need help for the upgrade of my current system.

    I need help for the upgrade of my current system.

    I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

    I want to make the larger environment using the following:

    (1) apply Virtualization

    (2) apply to the failover process (clustering)

    "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

    Storage 4) that supports Raid (1 and 5)

    UTM excellent 6) that supports (SSL VPN, VPN Global)

    suitable backup solution 7)

    (8) good antivirus for clients

    my questions:

    (1) can you provide me with a good design for this environment

    (2) should I choose what operating system:

    Microsoft datacenter or company

    I know datacenter provide us the unlimited VM but needs per processor license

    so if I have two Grouped servers I want to buy 4 licenses

    and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

    (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

    (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

    (5) what about win2k8 license for VM:

    lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

    (6) can I use backExec license for SBS with windows 2008 standard

    (7) who better to virtualization AMD or INTEL

    (8) hyper V or VMware?

    (9) what of Microsoft data protection Manager... is this good?

    (10) what virtual machine manager? What are the benefites keys

    Thanks in advance

    Hello AnasAI,

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • Need help for the license

    Hi all

    I need help license the following environment:

    1 400 VDIs.

    2. associated VDI servers.

    3-8 non - VDI associated servers.

    This environment runs on 6 dual CPU servers.

    Concerning

    For this, but all these already include vSphere, ESX and vCenter licenses.

    Advanced also include VSAN.

    Advanced horizon is available as simultaneous user and username, so if you can choose what type of license would be the most suitable for you, in most cases, the concurrency model is best suited.

    So say you have 400 concurrent users, you need 400 advanced Horizon permits and are then all included vSphere licenses.

    Linjo

  • Re: Need help for the restoration of the system

    Hi, I need help!

    I recently bought a Toshiba Satellite. I had some problems when trying to install some programs, some seem to fail. I wanted to clean the computer with system restore disc, only to find a record of 32-bit to a 64-bit computer.
    There is a repair of the setting system installed on the computer but it does not work, when I put it on disk, files, it cannot be opened.

    I can restore the system somehow repair; It must have been damaged by a virus. It should come with a big warning that the disk is not compatible!

    I have burned one day drive the first if I d just so you know! Any advice?

    Hello

    At first, I must say that you should tell us what model of laptop you have exactly.

    I put t know what cell phone you have and what you have with her, but in fact, it's that many laptops come with preinstalled OS 64-bit and 32-bit version on DVD.

    In this case, you must create own 64 bit preinstalled use Toshiba recovery media creator recovery DVDs. Alternatively, you can install 64-bit without DVD disk with HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
    Of course, this will not work if you didn't change the factory settings.
    Try if it will work for you.

    At the end I would say that what I wrote is detailed described in the document s user manuals but I presume that you didn t read it, right?

  • need help for the start up programs etc too of &#62; &#62; &#62; &#62;

    I am currently using Ccleaner as my msconfig works not what me hae questioned here in any case there are 3 categories of start they are; Windows, internet explore and scheduled tasks, can someone tell me which ones I can disable

    Windows.
    Yes HKCU:Run CTFMON. EXE C:\windows\system32\ctfmon.exe
    Yes HKLM:Run Adobe ARM "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe"
    Yes HKLM:Run ArcSoft Connection Service C:\Program Files\Common ArcSoft Service\Bin\ACDaemon.exe
    Yes HKLM:Run CTSVolFE.exe "C:\Program Files\Creative\Mixer\CTSVolFE.exe" / r
    Yes HKLM:Run Dell QuickSet C:\Program Files\Dell\QuickSet\quickset.exe
    Yes HKLM:Run ehTray C:\WINDOWS\ehome\ehtray.exe
    Yes HKLM:Run HotKeysCmds C:\WINDOWS\system32\hkcmd.exe
    Yes HKLM:Run IgfxTray C:\WINDOWS\system32\igfxtray.exe
    Yes HKLM:Run IntelWireless "C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe" /tf Intel PROSet/Wireless
    Yes HKLM:Run IntelZeroConfig "C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe".
    Yes HKLM:Run MSC "c:\Program Files\Microsoft Security Client\msseces.exe" - hide - runkey
    Yes HKLM:Run persistence C:\WINDOWS\system32\igfxpers.exe
    Yes HKLM:Run SigmatelSysTrayApp %ProgramFiles%\SigmaTel\C-Major Audio\WDM\stsystra.exe
    Yes HKLM:Run "C:\Program Files\Common Java Update\jusched.exe" SunJavaUpdateSched
    Yes start common digital line Detect.lnk C:\Program Files line Detect\DLG.exe

    Internet Explorer
    Yes the Blog Extension this C:\Program Files\Windows Live\Writer\WriterBrowserExtension.dll
    Yes Extension diagnose connection problems... %windir%\Network Diagnostic\xpnetdiag.exe
    Yes expansion Messenger C:\Program Files\Messenger\msmsgs.exe
    Yes search Extension C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR. DLL
    No Skype Extension click to call C:\Program Skype skypeieplugin.dll
    Yes Helper AC - Pro C:\Documents and Settings Settings\doug\Application Data\Complitly\AutocompletePro.dll
    Yes to support Adobe PDF link Helper-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
    Yes to support Google Toolbar Helper-C:\Program Files\Google\Google GoogleToolbar_32.dll
    Yes to support Google Toolbar notify BHO-C:\Program Files\Google\GoogleToolbarNotifier\5.7.7227.1100\swg.dll
    Yes Helper Java (TM)-plug-in 2 SSV Helper-C:\Program Files\Java\jre6\bin\jp2ssv.dll
    Yes Helper Java (TM)-plug-in SSV Helper-C:\Program Files\Java\jre6\bin\ssv.dll
    Yes Helper Class JQSIEStartDetectorImpl-C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
    No Skype Browser Helper C:\Program Skype skypeieplugin.dll assistance
    Yes to support Windows Live Sign - in Helper C:\Program Files\Common Files\Microsoft Shared Windows Live WindowsLiveLogin.dll
    Yes the toolbar Google Toolbar C:\Program Files\Google\Google GoogleToolbar_32.dll

    Scheduled tasks
    Yes the task FacebookUpdateTaskUserS-1-5-21-1220945662-573735546-839522115-1003Core C:\Documents and Settings\doug\Local Settings\Application Data\Facebook\Update\FacebookUpdate.exe/nocrashserver/c
    Yes the task FacebookUpdateTaskUserS-1-5-21-1220945662-573735546-839522115-1003UA C:\Documents and Settings\doug\Local Settings\Application Data\Facebook\Update\FacebookUpdate.exe /ua /installsource scheduler
    Yes the task GoogleUpdateTaskMachineCore C:\Program Files\Google\Update\GoogleUpdate.exe/c
    Yes GoogleUpdateTaskMachineUA C:\Program Files\Google\Update\GoogleUpdate.exe /ua /installsource Task Scheduler
    Yes the task antimalware software of Microsoft scheduled scan c:\Program Files\Microsoft Security Scan of Client\MpCmdRun.exe - ScheduleJob - RestrictPrivileges
    Yes the task MpIdleTask c:\Program Files\Microsoft Security Client\MpCmdRun.exe - IdleTask TaskName - MpIdleTask
    Yes the task photopadShakeIcon C:\Program NCH Software\PhotoPad\photopad.exe - shakeicon

    Please let me know if I can disable some and what I can disable without is doing something important... Thanks for your help.

    Yes HKLM:Run Adobe ARM "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe"
    Yes HKLM:Run ArcSoft Connection Service C:\Program Files\Common ArcSoft Service\Bin\ACDaemon.exe
    Yes HKLM:Run CTSVolFE.exe "C:\Program Files\Creative\Mixer\CTSVolFE.exe" / r
    Yes HKLM:Run Dell QuickSet C:\Program Files\Dell\QuickSet\quickset.exe
    Yes HKLM:Run ehTray C:\WINDOWS\ehome\ehtray.exe

    Yes HKLM:Run SigmatelSysTrayApp %ProgramFiles%\SigmaTel\C-Major Audio\WDM\stsystra.exe
    Yes HKLM:Run "C:\Program Files\Common Java Update\jusched.exe" SunJavaUpdateSched

    Yes the task GoogleUpdateTaskMachineCore C:\Program Files\Google\Update\GoogleUpdate.exe/c
    Yes GoogleUpdateTaskMachineUA C:\Program Files\Google\Update\GoogleUpdate.exe /ua /installsource Task Scheduler
    Yes the task photopadShakeIcon C:\Program NCH Software\PhotoPad\photopad.exe - shakeicon

    I would disable them. but you have to download Autoruns:

    Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    More info comes from Stanley S. and it should help you before you decide who to disable.

    Only startup items that I run are elements of microsoft.

    To demand the same tasks.

    Solutions Explorer, it seems that you have too many toolbars for me, but you should get each of them to see if you want it to run as an add-on, you could also disaable each addon one at the time and the surf for a while and if all is ok, leave this option unchecked.

  • NEED HELP FOR THE RESOLUTION AND QUALITY?

    Hi guys

    I've done of these vector portraits type in photoshop for the past two weeks, we were all going well until, when someone sets up as a picture on facebook etc the quality is not as good as when I just display the image on my computer.

    I was from the new photoshop and using 800 x 800 pixels and the resolution to 72 pixels/inch, I wrong here somewhere? or is it the fact that I use photoshop to do this? im sure there are many people who will advise me to use illustrator, which I thought a lot to do. but I would like to know if this can be fixed in photoshop first.

    Thanks in advance for your help

    question.jpg

    It's a little pixel-ish in the areas...

    FAULTY zeth vector.jpg

    P.S. I also notice that it is working in the "defective" text box

    Once your support for a screen, you only need to worry about the pixel dimensions, the PPI is irrelevant. Facebook will tell you what's the resolution of each image. To my knowledge, Facebook does not support svg graphics in the opposite case, you could use Illustrator. Just make sure that when you don't create vector graphics in PhotoShop that you save a copy in a file buffer, as the jogging and png do not support vectors.

  • need help for the VPN connection

    Hi guys

    can you help with that?

    I installed a VPN connection, but the tunnel shows that status: upward and the protocol description: down.

    debugging is turned on and displays following-

    ITS has applications pending (xx.xx.xx.xx local port 500, xx.xx.xx.xx remote port 500)

    DEC 20 02:39:26.762: ISAKMP: (2142): sitting IDLE. From QM immediately (QM_IDLE)

    02:39:26.762 20 Dec: ISAKMP: (2142): start Quick Mode Exchange, M - ID 3357871564

    02:39:26.762 20 Dec: ISAKMP: (2142): initiator QM gets spi

    DEC 20 02:39:26.762: ISAKMP: (2142): Pack xx.xx.xx.xx my_port 500 peer_port 500 (I) sending QM_IDLE

    02:39:26.762 20 Dec: ISAKMP: (2142): sending a packet IPv4 IKE.

    02:39:26.762 20 Dec: ISAKMP: (2142): entrance, node 3357871564 = IKE_MESG_INTERNAL, IKE_INIT_QM

    02:39:26.762 20 Dec: ISAKMP: (2142): former State = new State IKE_QM_READY = IKE_QM_I_QM1

    02:39:26.794 20 Dec: ISAKMP (2142): packet received from xx.xx.xx.xx dport 500 sport Global 500 (I) QM_IDLE

    02:39:26.794 20 Dec: ISAKMP: node set-419503660 to QM_IDLE

    DEC 20 02:39:26.794: ISAKMP: (2142): HASH payload processing. Message ID = 3875463636

    DEC 20 02:39:26.794: ISAKMP: (2142): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3

    SPI 2561284360, message ID = 3875463636, a = 0x87D0CFC8

    DEC 20 02:39:26.794: ISAKMP: (2142): removal of spi 2561284360 message ID = 3357871564

    02:39:26.794 20 Dec: ISAKMP: (2142): node-937095732 error suppression REAL reason "remove larval.

    02:39:26.794 20 Dec: ISAKMP: (2142): node-419503660 error suppression FALSE reason 'informational (en) State 1.

    02:39:26.794 20 Dec: ISAKMP: (2142): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY

    02:39:26.794 20 Dec: ISAKMP: (2142): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

    02:39:46.798 20 Dec: ISAKMP: (2142): purge the node-1177810765

    02:39:46.798 20 Dec: ISAKMP: (2142): purge the node-138734109

    02:39:56.763 20 Dec: % s-6-IPACCESSLOGRL: the rate limited or missed 2 sachets of access list record

    DEC 20 02:39:56.763: IPSEC (key_engine): request timer shot: count = 2,.

    local (identity) = xx.xx.xx.xx:0, distance = xx.xx.xx.xx:0,

    local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

    remote_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4)

    the config is following.

    crypto ISAKMP policy 10

    BA 3des

    preshared authentication

    Group 2

    ISAKMP crypto key xxxxxx address xx.xx.xx.xx

    !

    !

    Crypto ipsec transform-set esp-3des esp-sha-hmac vpnset

    transport mode

    !

    Crypto ipsec tech profile

    Set transform-set vpnset

    !

    !

    my-map 20 ipsec-isakmp crypto map

    defined peer xx.xx.xx.xx

    Set transform-set vpnset

    match address 155

    Hello

    As for your question, you can have more than 1 card crypto on the interface.

    However, you can use the same card encryption for several strategies. You can change the ma-card to vpnmap.
    In this way the two are enabled on the same interface, with one having a higher priority than the other.

    So if a package came from inside, the first crypto ACL interface is checked and then the next and so on. The first match found is chosen for the IPsec negotioation.

  • Need help for the particular case of selection

    Oracle DB 12 c, I think than 12.1.2

    drop table person_tests;

    create table person_tests)

    person_id number,

    test_type_id varchar2 (1).

    date of test_date

    );

    insert into person_tests (person_id, test_type_id, test_date) values (1, 'A', to_date('01012000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (1, 'A', to_date('01022000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (1, 'B', to_date('01032000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (1, 'B', to_date('01042000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (1,', to_date('01052000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (2,', to_date('01062000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (3, 'A', to_date('01072001','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (3, 'A', to_date('01082000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (3, 'B', to_date('01092000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (3, 'B', to_date('01102000','MMDDYYYY'));

    insert into person_tests (person_id, test_type_id, test_date) values (3,', to_date('01102000','MMDDYYYY'));

    People as a participant in some of the tests: A, B and C where each event is tagged with a date when finished.

    I need to get out of the only people who have done 2 tests of type A, 2 type tests B and 1 type C. I test have show the type of test and the date of the most recent of these tests. In the above example would output desired

    1 JANUARY 5 C 00

    3. A 7 JANUARY 01

    Hope that this definition of the logical problem

    Hello

    Sorry, I missed the obligation to show the most recent test_type_id.

    Assuming that the date to display is the date, that the minimum conditions were met (if not gratutitous trials came afterwrds), you can do something like this:

    WITH got_r_num AS

    (

    SELECT person_id, test_type_id, test_date

    , ROW_NUMBER () OVER (PARTITION BY person_id, test_type_id)

    ORDER BY test_date

    ) AS r_num

    OF person_tests

    WHERE test_type_id IN ('A', 'B', 'C')

    )

    SELECT person_id

    MIN (test_type_id) DUNGEON (DENSE_RANK LAST ORDER BY test_date) AS last_test_type

    MAX (test_date) AS last_test_date

    OF got_r_num

    WHERE r_num<= case ="">

    WHEN 'A' THEN 2

    WHEN 'B' THEN 2

    WHEN 'C' THEN 1

    END

    GROUP BY person_id

    HAVING COUNT (*) = 5-2 ' A + 2 ' B + 1 'C '.

    ;

    What test_type_id would you like to display tie for the final round?

    I just saw your post by saying that a person with 3 or more 'A' type tests should be excluded.  In this case, my original solution (with = in the WHERE clause) is what you want; only FINALLY used to get past test_type_id.  The solution in this post is for the situation where you don't care if there are 3 or more ' has, but you want to ignore all but the first 2.

  • Need help for the button to trigger on the text caption effect

    Hello world

    I work in

    Screen Shot 2016-04-13 at 12.52.31 PM.png

    on a Mac (chart below)

    Screen Shot 2016-04-13 at 12.53.04 PM.png

    I'm very new to Captivate (only my second week), but am familiar in other Adobe programs. I'm trying to get a dynamic object that I made in a button to trigger an effect on a text caption. I scrolled the forums here and tried various things of the advanced actions for just using the drop down menus in the property inspector and nothing that I tried gives me the result I want.

    Here is a screenshot of what I'm working with.

    Screen Shot 2016-04-13 at 12.54.37 PM.png

    What I want to do is for the arrows for the buttons (and they are currently). When the slide appears first I don't want that image and the arrows visible. So when the user clicks on the arrow, I want the effect I chose (spiral) that will be triggered with the corresponding text.

    Looks like my property for each caption Inspector (the names are different for each)

    Screen Shot 2016-04-13 at 12.58.03 PM.png

    And I also tried to write a few advanced Actions that follow as well as tutorials that I found online, and nothing gives me what I want.

    When I preview the slide I can see everything on entry and then when I click the button to apply the effect. I rechecked the advanced actions and usually when I try these nothing happens at all.

    Is - it there anyway that I can get that works this way, I'm wanting. It seems that it should be simple and I'm right on it.

    The shape of buttons are all pause at this moment, it's OK.

    I just tried it out and see what you mean. The text is there from the beginning, and that shouldn't be the case. you expect it not to appear when the button is clicked. I have never used this spiral effect myself, but since you have no control over it, I mean you can't see where starts the effect at all, there is no visible path you have with the other effects of the entry. Either, you need to create a custom, effect whose path begins with text outside the scene, or a combination of an Alpha to + a standard entrance effect.

    Tried the first one with a simple left to a straight path. I edited the paths so that they all start at the same position horizontal and end at the same horizontal position. So happy with the leaders and Guides that we finally got in Captivate, they are very useful for this type of design:

    It's the chronology:

  • Pavilion WA782UA #ABA: need help for the Intel Rapid Storage Technology driver

    Hello

    I have recently reinstalled Windows 7 after putting in a new drive hard 1Terabyte. I then had problems with Windows Update, and just my overall use of my laptop has been slower. After reading on other forums with people who got similar error messages from Windows update told me to update my driver Intel Rapid Storage Technology. (Link forum here)

    However when I visit my list of drivers on the HP site, I find not the Intel RST driver to update. Can someone direct me to the Intel RST driver that corresponds to my laptop?

    Laptop HP Pavilion dv6 - 2173cl

    Hello:

    You must use this version... you want the 3rd file listed on the left.

    https://Downloadcenter.Intel.com/download/23496/Intel-rapid-storage-technology-Intel-RST-RAID-driver

    Do not click on the most recent version of the driver is available because it is too recent for the chipset has your PC.

  • I need help for the problem event name: BlueScreen. Help, please...

    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.2
    Locale ID: 1033

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8007D53010
    BCP2: FFFFF88006CEAC48
    BCP3: 0000000000000000
    BCP4: 0000000000000002
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Hi Vikram,

     

    Thanks for posting the question in the Microsoft Community!

    You get the blue screen error in the computer.

    To work with the issue, I suggest you to visit:

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

    Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

    Note: When you format a disk, all data will be lost.

     

    It would be useful for us to identify the problem, if you could upload the dump file.

    You can use the Sky-drive to download the dump file. Check the link for the steps on how to download Sky-Drive.

    http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65.

    The location of the dump file is C:\Windows\Minidump\.

  • I need help for the reactivation of DreamWeaver MX 2004.

    My computer system is blocked and I have to re - install programs.  I have an old DreamWeaver MX 2004.  I have re-installed and now difficult to activate online.

    The program is no longer supported and there is no path upgrade discount for her, but you CAN activate it and use it (but not online, MX2004 activation servers are long, long gone)...

    Use the code from this page (not your current activation code) and the activation process: error: cannot activate | Product Macromedia

  • I need help for the collection of information?

    Ok... Here's the deal.  I started creating websites for years with Microsoft Frontpage. (you see a part of the problem)  Many of the sites that I manage using Frontpage extensions to collect information on customers and send it to the e-mail address of the owner of the Web site.  One of these sites was just moved to a new server and because Microsoft does not support Frontpage, host extensions it installed on their new server nor do they count... so the rest of the problem.  I just bought Flash as part of a suite of Adobe.  I am in the process of learning, but right now... y at - it a simple way of using Flash (action script 3) to allow someone to enter their e-mail address and online form when they click a "Get the Coupon" button, it will send the information to my client's e-mail address while opening another page to access a discount coupon for the living room?

    If you can direct me to a tutorial in this sense, it would be extremely useful.

    Mark Patterson

    It is a coding language that must be supported by the server.  almost all servers have php support.

  • Need help for the library of footer in Dreamweaver CS4

    I am trying to get a library item to work as a footer.  Here are the steps I took

    1) I created a file footer.lbi inside the library of assets, folder and this file footer.lbi shows when I saw in the browser

    (2) then, at the bottom of my page indexTest.html, I created a div tag with a footer ID and only inserted in the document.

    (3) I did drag the file footer.lbi to the active library folder in the footer of my indexTest.html tag

    < div id = "footer" > < a href = "Library/footer.lbi" > footer < /a > < / div >

    (4) the drag of the library adds the statement above to my code href, and results in active a link marked footer being placed in the actual footer of my Web page.  By clicking on this link opens the actual footer.

    (5) how can I me actually the library item into my Web page for the page footer appears instead of a hyperlink?

    Thank you

    reindeer4 wrote:

    I am trying to get a library item to work as a footer.  Here are the steps I took

    (1) that I created a file footer.lbi inside the library of assets folder, and this footer.lbi file therefore seems fine when I saw in the browser

    (2) then, at the bottom of my page indexTest.html, I created a div tag with a footer ID and only inserted in the document.

    (3) I did drag the file footer.lbi to the active library folder in the footer of my indexTest.html tag

    (4) the drag of the library adds the statement above to my code href, and results in active a link marked footer being placed in the actual footer of my Web page.  By clicking on this link opens the actual footer.

    (5) how can I me actually the library item into my Web page for the page footer appears instead of a hyperlink?

    Thank you

    Try this workflow:

    1. Create a page that contains the content you want to have in the library item.
    2. Select the items to be placed in the library item and use EDIT | Library > add object to library
    3. Add the footer div on your page production, click on it, select the library item, that you just created and click INSERT in the library pane

    This should give you what you want.

  • Need help for the parent data!

    I and the application (app) that launches a window title and load a module (module1). In module1, I have a custom DateChooser component (dateChooser). I have stock introduced in dateChooser that needs to send the data back to module1, but instead it tries to send to app. I tried parent (which comes out wrong) & parentDocument but no luck. Can someone tell me how to get data in module1. Thank you!!

    He solved.

    Moved the event to module1 instead of dateChooser listeners and worked like a champ.

Maybe you are looking for