Need help from blackBerry - failed to connect Bluetooth transfer files from Sony Ericsson Smartphones

Similar Questions

• Problem with my phone, need help from Sony

  Hello
  I bought my phone in Oct 17 with local agent warranty Sony "Cell Avenue", I noticed a flaw on the phone "pixel does not" same day to night and visited cell AAvenue to file a claim and raise a ticket the next day and this is what happened:
  1 asked me to come in November as they still new in Jordan and tools to check the device are still to come
  2 visited their first week of November, they asked me to come in 2 weeks
  3 made their visit in 2 weeks and they took my phone to check on it
  05:04 days I called them and they ask me to call them to visit
  5 that I went there and they approved the request and wanted to replace the screen that I refused. I asked my right to have a replacement and they said they do not now have them and call them / or they call me in one or more or more. They gave me a claim or number of what they call a service order number 230 and who was in November 26, 2014
  6 sine they don't call, I called after one month, they said replacement are not yet there and call in 2 weeks.
  7 I called during the first week of Jan and there is a snow storm, nothing happens
  8 I called them last week, they said that we finally got the screens and please call us on Thursday (last Thursday)
  Note: I've been surprised, they mentioned on the screen and I thought we had an understanding that I don't want a screen I want a new phone... Then I realized that they do not remember the case.
  9 in any case, I called them today instead of Thursday and they said: Yes, we have the screens and you can replace your screen... I told the technician again I want to unlock my phone, he said why u na not come before I told him that I did several times and you delayed me u asked me to wait waiy and come later. I gave him the claim number and explained to him again and he said: Oh yes we do not always have the replacement... And that we'll call me later, I begged him to give me a date limit when he will remember, says, I'm busy and I don't know when. I insisted a date limit, he said, he will call today. And to be honest, I am sure that it will not be called and I'll call him tomorrow.

  Sony, I need a solution today until tomorrow... Please help me.

  THX

  I am sure you are aware that we are a user support forum members feel to help other members and thus no influence on Sony - Sony representatives do visit occasionally, but are unable to get involved in other air-consuming countries you would be better to return your unit to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/

• Need help from a staff Adobe on account membership

  Two memberships (complete creative cloud) went within one account. I need help of a staff of Adobe to transfer one of them to another account.

  Thank you.

  Robert Abrigo

  Post edited by: a TechOneGlobal

  Use the Chat support - for the still need help, click the link below? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I started my system, unfortunately I forgot to backup all bookmarks on firefox, how could I get these bookmarks in firefox need help from your server

  Hi, friends
  I started my system, unfortunately I forgot to backup all bookmarks on Firefox, now how do I get these bookmarks in Firefox need help from your server

  Start or restart to activate something, or restart.

  Did you format your hard drive or re-install Windows?

  If you did a reinstall of Windows, look for a folder.
  It can be called old windows. Check the instructions that you were given.

• the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  Hello

  It seems that you want to restore the files removed from the memory card.

  I will definitely help you with this.

  I would say you can search the Internet for data recovery software by using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Need help from blackBerry Smartphones: send files via Bluetooth for my Curve 8900

  Hi all

  Earlier this week, I made the change to a BB and overall I am very happy with it, but there is a thing that is annoying on the phone and despite my efforts and a lot of tinkering, I was not able to solve this problem, I'm looking for help.

  I try to send files to other Bluetooth devices to my BB 8900 and I can't do work of t. strangely, I can send my BB files to other Bluetooth devices with no problems but I can't send things on my device.

  I lived the articles (e.g. http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB04132&slic... )

  but in vain.

  In a nut shell, I enabled bluetooth on my camera, I made detectable and combined with other devices that I am trying to transfer files from, I went into options of the terminal for these devices and their confidence, and then I tried to send files.

  If I send from another phone (LG viewty) or Nokia E61i, I get an error message indicating that "send failed".

  If I send a computer that was paired, I select the file I want to send > right click > sent to > Bluetooth > other and select my BB8900 in the list of paired devices. At this point, the computer appears to try to send the file, but I am presented with an error message indicating "file transfer Service is not found on device BB8900."

  Why is this? How do I am able to send files to my BB 8900 but not sent to it, and what can I do to solve this problem?

  This problem is causing me a lot of grief that I have given on other phones, I need to transfer to my new BB, unfortunately I do not have a USB cable to one of the phones, so Bluetooth is the best alternative.

  Please can someone help!

  Thanks in advance,

  /Chuck

  OK, so after re-reading of this last KB article, I realized that I was a complete dunce!

  I have now managed to successfullty receive pictures and audio files on my BB.

  Thanks for your help!

• Desperately need help from blackBerry Smartphones - I can't read my messages PIN.

  I have a Storm 9500 and does not know how to read my PIN messages. I work away from home and so my manual, and for all the google/BlackBerry forum research I did, no one explains how read , only send them.

  My companion with a new curve took my PIN and me by post, and all I get is the envelope in the upper left corner with a growing number, that has got to be the PIN messages, as my email is all set up and working properly (and the number goes down when I delete emails). There must be a together simple procedure, but for the life of me I can't find!

  I called Vodafone who could help, as BlackBerry do not PIN message support! (?)

  I want just the bl * envelopes dy to disappear! Help, please.

  NAT :-(

  ethosb is correct, and if you still have problems that maybe it's because you've hidden your main message folder.  In the home screen, press the BB Menu key and select this option to display everything.  You should then be able to find the folder with the message of PIN code for your friend.

• Desperately need help from chat session - site keeps browsing me page "need help, we need more information.

  I want to deactivate CS3 via chat, because it has been installed on a PC that has crashed and cannot be turned off as usual.  When I try to get from adobe to give me a "Start chat" button, it doesn't make me go through the product screens you have - what you're doing with it.  I tried eight different ways to get a chat session going, and no matter where I start, it keeps me taking back on it tell us what you have and what you want with this page.  If someone has a link "start chat", I would be grateful to have.  Thank you

  You're not likely to find staff chat service, until the long weekend passes.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• I need help my pc does not connect to the internet after installing updates

  My internet does not work after you install the updates so I uninstall and they work fine.

  It happens all the time as I paid for the program and downloaded on my PC and they need to access the internet at work and when I click on it it say failed to connect or unable to connect to what happens with that?

  I downloaded mozilla fire fox and that no longer works and the same for IE8 after instalation my internet does not work why?

  I need serious help to what I at least need these programs, I bought to work.

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  OR

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• need help from customer relationship E60978963

  It started in February 2015 with the VAIO, I bought in 2013. So fast discharged battery and power plug appeared to shake. I had to move out of the country in April 2015, and I needed to have a laptop with me, so I thought that 2 months would have been sufficient. Until March 20, 2015, I received voicemail about the offer of redemption, so I quickly accepted and responded with my address. According to the email, the audit was approved on 26 March and should be delivered with 4 to 6 weeks. I bought another laptop and bring a new one with me on this trip.

  It has been more than 7 weeks, so I continued the call for Sony to keep track. Every time Sony Support, aka the doorman, says "wait" until the customer relationship will come back to me (unless one or two days) and they said they do not have a client relationship contact number. I called again after two days because nothing happened yet. This time, now Sony helped me I need to fill out a form or an article, he would send me to my email. I received no email from Sony, once AGAIN. Why change history?  Please advise and I would like to know who I can talk to for this problem. Again, the event ID is E60978963.

  Finally, the problem seems to be resolved, but not yet completely. Thank you. However, I would need to discuss this further with Sony.

• Need help to repair the internet connection; Airport extreme and microsoft xp pro

  I have the internet service of Rogers, a Dell laptop with microsoft xp professional and Apple airport extreme. I can't connect to the internet. I tried Apple, Rogers and Microsoft and no one can solve the problem. This has happened once before and Rogers has solved the problem by changing something on the WPA or WPA2 but I don't remember the details and they don't seem to help. We rebooted the router and my pc. I deleted and readded the connection; not good. Someone at - it ideas?

  Hi Julie,.

  1. do you receive an error message or error code?

  2 have you made changes on the computer before this problem?

  WPA authenticates users to ensure that only authorized people can access the network. There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards.

  This problem can occur because settings of Internet connection or drivers, try the following methods and check if it helps.

  Method 1:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Refer to the steps in the following Microsoft article.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us updated on the status of the issue.