Need help, get message display driver has stopped working, but has recovered

Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

Hello

1. what operating system do you use?
2. What is the brand and model of your system?
3. Once you get this error message?
4. you did it before the issue of any material changes or software?

Try the steps outlined in the methods mentioned below and let us know if it helps.
Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

Step 1: Try now to the KB article to perform the clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
http://support.Microsoft.com/kb/929135
Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

Clean boot in XP:

Try now to the KB article to perform the clean boot:
http://support.Microsoft.com/kb/310353
Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

Step 2: Turn off the antivirus software:
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

Method 3: update the driver for

Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

Use the Group Policy settings:
To resolve this issue by using Group Policy settings, follow these steps:

(a) click Start, type gpedit.msc in the search box and press ENTER.

(b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

(c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

(d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

Use the powercfg command:
To resolve this issue by using the powercfg command, follow these steps:

(a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

(b) at the command prompt, type the following commands:
powercfg - X-monitor-timeout-ac 0
powercfg - X-monitor-timeout-dc 0

Get back to us if the problem persists.

Tags: Windows

Similar Questions

  • Error message "display driver has failed but has now recovered.

    I received a message on my PC saying "display driver has failed, but has now recovered," I got a black screen when it happened.  Does anyone know what this means?

    Jack

    It is more informative than an error message.  If she does not recover, it would be a problem.  You may be able to solve it by installing the latest video driver available.

  • Dc7800: "display driver igfx stopped responding and was recovered with a success." for Windows7

    Hello

    Dc7800 series systems are in error - "display driver igfx stopped responding and has successfully recovered. Windows 7 "with Windows7 operating system

    The systems provided with Windows Vista and we have later upgraded to Windows 7. Now 2/3 systems many DC7800 systems that we have in our office are showing the above error and the screen turns off for 2/3 seconds. We have reloaded OS but still the problem persits.

    There is no display driver for Windows 7 for DC7800 HP driver/software downloding site. Application of detection of driver of Intel found that this latest version of the driver is installed.

    Ran windows memory diagnostic tool and has not found any error.

    Can anyone help?

    Thank you

    Hello:

    Try this driver for 32 bit OS:

    http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18223&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = drivers

    Try this driver for the 64 bit OS:

    http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18228&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = drivers

    Paul

  • display driver nvlddmkm stopped responding and successfully recovered

    I have the latest nvidia drivers installed, dual-core amd athlon 64, nvidia 9800 gt grahpics, good power and cooling system, sufficient memory capacity.  stop crashing to this display while gaming, nvidia insist it is a problem with vista 64. everything else works fine. Please notify

    Try one of the older nVidia drivers.  Last year, 182 version was an everyone has liked the best.  Because I don't have any nVidia cards in any PC, I can't tell you what is the current favorite.  Also make sure your power supply is sufficient to keep the freshness of system and powered.

  • malfunction nvlddmkm display driver / he stops working and then restores it's self

    I am very new to this sort of thing computor, and it's very unnerveing, when strange things happen to the computor. I need to know

    How to solve this problem, because it is very annoying, when it arrives in the middle of do me something. Help, Help! LW

    Try the Dostoyevsky77
    NVIDIA forums
    http://forums.nvidia.com/index.php?showtopic=45605

  • I constantly get a message error display driver has stopped working and has recovered.

    I have my getting an error message display driver atikmdag stopped responding and has successfully recovered.  Just typing this screen deleted three times!  What should I do?  I have an AMD processor and Windows Vista Home.

    Hello

    See this article which has a Fix - it:

    "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
    http://support.Microsoft.com/kb/2665946

    Also check with Support ATI, their drivers and documentation online and ask in their forums
    on known problems. You should perhaps update the video driver or re - install the same as
    If it is more recent. It is sometimes necessary to return to an older stable version.

    Drivers and Support ATI
    http://support.AMD.com/us/pages/AMDSupportHub.aspx

    ATI Catalyst drivers - use the Catalyst drivers
    http://game.AMD.com/us-en/drivers_catalyst.aspx

    AMD/ATI Forums
    http://forums.AMD.com/game/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Satellite A500 - display driver has stopped and recovered

    Hello!
    I have a portable Satellite A500-1EE causing me trouble lately. Several times a day, the screen goes black and after a few seconds, it retrieves, with the message:
    "Display driver has stopped and recovered. Display NVIDIA Windows Kernel Mode Driver, Version 257.21 driver stopped responding and has successfully recovered."

    Please give me advice on how to solve the problem.

    Thank you
    Roxana

    From time to time it happens on my P500 too but especially if I look at a Web page with flash player but after driver recover everything is OK again.
    To be honest, I don't see it as a major problem.

    Is there a particular situation when it occurs on your A500?

  • Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

    original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

    Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

    update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • display driver nvlddmkm stopped responding and has successfully recovered

    So, about a week ago I checked the nVidia website to see if there was no news available drivers for my card (XFX GeForce 9600 GSO) and there was. Installiation was simple then a restart. After reboot, I thought that I would play Call of Duty 4 and after 5-10 minutes of play my screen goes black and it appears with a small warning sign in the region of noticfication "display driver nvlddmkm stopped responding and was recovered successfully."

    The pc will be a blue screen with a nvlddmkm.sys error or it goes off and nothing will work
    forcing me to turn off by the power button. I had never met moyenessentiel before you install the latest drivers.
    After looking for some fix on google, I couldn't find
    something solid. So I opened the Device Manager and clicked on graphics cards
    and redeployed the pilot.
    Still no luck. Most of the games I played this error still appeared. I tried all the drivers on the nVidia site
    that are suitable for my card. The drivers on thecd also included witht that card and they do not seem to work either.
    I installed the drivers with Windows Live OneCare disabled, disabled UAC and nothing running
    in the background, such as recommended by nVidia. Still nothing works. I have the Sims 3, Call of Duty 4,
    Call of duty: World at War, Halo 2 for Vista and HAWX installed. The only one
    game I havn't had the error is H.A.W.X
    I am running Windows Vista Home Premium authentic with all latest updates from Windows Update.
    Any ideas? This leads me through the wall...

    Hello PaulFordge,

    Hello go to the temperature settings in the nivida, here's an image Control Panel.,.

    What is your idle temp? If you can load a game in windowed mode and have the temperature to be measured to see if the window is active, what is the temperature under load?

    Thank you

    jlluitj
    Josh Luitjens - self-taught computer tech.

  • WOW/graphics error "display driver nvlddmkm stopped responding and was retrieved successfully."

    Help, please. On the next computer I have terrible crash problems while playing WoW. Critical error WOW States: "not enough memory to process command - 11 538 bytes requested."

    When running 3D Mark Vantage I can reproduce the "display driver nvlddmkm stopped responding and was recovered successfully.

    Processor Intel Core i7 CPU 920 @ 2.67GHz
    Details of the component
    NVIDIA GeForce GTX 295 graphics
    4 095 MB total graphics memory available graphic set
    Main hard drive 53GB free (140 GB Total)
    64 bit version with service PAC 2 Vista Ultamate

    Forums are full of posters indicating that it is a Vista / Nvidea incompatibility problem that has been around for years and that the problem is not treated. I tried everything I can think of, check the RAM to download new drivers, to the removal of unnecessary records of WOW. I reinstalled everything, run each diagnostic tool in the plane, patches downloaded, checked for the virus and still no help.

    I am currently able to play WOW on the smaller graphics settings and avoid cities. With this level of equipment, it's a shame, really, I should be able to do more.

    Did anyone have any suggestions of what I can do at this point?

    OK, I did a lot of research on this issue.  The problem lies in the Blizzard, most of the time.

    World of Warcraft is a set of 32 bits.  Because it is strictly 32 bit, it only has access to 2 gigabytes of memory.  Windows manages the other 2 giga of addressable space.

    Most of the developers of games flag their games before the compile time to use larger amounts of memory.  Blizzard doesn't do this, because their anti-cheat system and third-party tools rely on the 32-bit addressing and address 64-bit would mean that they must all be rewritten.

    What happens in the game, is that your footprint large capacity memory card is mapped in the game.  In general, it is when your settings are high, because it uses the most memory, which explains why the game is playable when you use minimal settings.  Given that the configuration of your particular graphics card uses close to 2 gig of RAM itself, quickly force you the game short of memory addressable space.

    To resolve this problem, you may be able to play with reduced settings.  Reduce your resolution is usually the best way to limit the use of memory, since it increases exponential use RAM when you increase the resolution.  You might have to play with different parameters.  You can open the upward Task Manager and monitor the use of your memory WoW game to see where the sweet spot is maintaining your memory under control.

    Blizzard will have to make the difficult choice to eventually allow access extended memory.  More people are buying equipment like yours, this problem will be more widespread.

  • Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

    Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

    Hiya,

    I have recently installed Windows 8 Pro, installed all of my usual applications etc..
    The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
    "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
    Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
    I can't find a way to properly uninstall the graphics driver.

    At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

    Hi guys,.
    Looks like this isn't just me.
    Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
    Information system;
    Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
    CPU: AMD FX-8150 eight physical cores
    GPU: ASUS NVIDIA GeForce GTX 560 TI
    Main hard drive: OCZ Vertex 3 120 GB
    It may be useful
    Edit: Still not falling down, 11/02/12, 4 days

    New edition;

    If you still receive the error message, try the following steps;
    Has. try to perform a clean installation of the driver.
    Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
         

    You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
    B. close all other programs
    It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
    You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
    More information can be found below
  • I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser."

    I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?

    Do exactly what the message says, and it will go away.

  • Satellite M50D-A-10W - display driver has stopped working while gaming

    Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
    When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

    I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

    Rare Hi

    This message is certainly created by the installed graphic card driver.
    I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
    In most cases, this should fix problems with gambling.

    Greetings

  • Display driver has stopped and recovered

    Hi, since a few days I get freezes and blackout and display driver has stopped running and was recovered. It happens when I am on youtube and continues to make, so I just turn off my computer. I had this happen before on my old computer, but that computer is brand new. I've had this for a few months and I have windows 7 64-bit XP.  MSI G41M-P28

    I searched for solutions to the problem and it is said it can be many things: RAM is overheating (but my computer doesn't seem to be hot.) Overclocked? I don't know, or need to update and download new updates for pilots. I had my computer checked and it showed 67% of drivers are ok, and 33 percent are not. But I want a free service and that you must have a subscription and there are fees.
    I'm so confused.  :(  I can't assign to computer and it is very difficult for me to understand. I have files that I don't understand what they're doing, and I need to have surprised location for the files to another drive / location I don't know.
    Please can someone help me and explain the problem and what I can do about it. And please if it can be a very simple and easy way that I can understand step by step :)
    Thanks :)

    Hello

    1. who is the manufacturer of the system?
    2. you did it before the issue of any material changes or software?
    3. What is the exact error message?
    4. When you receive this error message?

    Method 1: Please, try the steps listed in the article mentioned below.
    Windows stops responding and you receive an error "display driver has stopped working normally":
    http://support.Microsoft.com/kb/328071

    Method 2: Boot your system in clean boot mode, and check if you get the same error again.

    Try now to the KB article to perform the clean boot:
    http://support.Microsoft.com/kb/310353

    Important: After you use the clean boot in order to solve your problem follow the steps in the "How to configure Windows to use a Normal startup state" section to start your system in normal mode.

    Method 3: If none of these mentioned the working methods, I suggest to uninstall and reinstall the video driver.

    Step 1: To do this, follow these steps.
    a. Click Start, select run, type devmgmt.msc in the run box and press ENTER.
    b. expand the graphics card.
    c. right click on your video card, select uninstall.
    d. restart the computer. Windows should now reinstall the video drivers.

    Step 2: Update the computer with the latest graphic drivers. Log in the Web site of the manufacturer to do so.
    Visit the below mentioned link please.

    How to manage devices in Windows XP:

    http://support.Microsoft.com/kb/283658

  • P70 Intel HD 530 display driver igfx stopped responding and has successfully recovered.

    Once or twice during the day I get a black screen and then a notification Windows 10 saying "display driver stopped responding and has recovered.

    In which case the log, the following event is recorded: "display driver igfx stopped responding and has successfully recovered."

    I updated the Intel graphics driver via windows 20.19.15.4352 mechanism and the frequency of the message seems to be reduced. However I understand 3-5 times a day.

    Go to control PANEL, then select MANAGER of DEVICES. Then select the selection of GRAPHICS cards. You should see Intel(r) HD GRAPHICS 530 and NVIDIA QUADRO M600M. For each, open (by double clicking), select UPDATE DRIVER and select SEARCH AUTOMATICALLY for UPDATED DRIVER SOFTWARE. There should be updates for each.

    When both are installed, stop and restart. After the reboot, you may need to go into control PANEL, then select NVIDIA control PANEL. Select MANAGE 3D SETTINGS. Under FAVORITE the CPU GRAPH, select SELECTION AUTOMATIC, and then click APPLY. (If you are still running on AC you can choose NVIDIA PROCESSOR HIGH PERFORMANCE).

Maybe you are looking for