Need help getting my old PS1 back up and functional. Any help out there for this old compurte

Similar Questions

• Need help finding parts for upgrading pc?

  Hi I want to upgrade my pc and I know this is old, but I need help to find parts I want to improve everyting.

  Here is my pc (hp media center m7260.se desktop pc units). Please I need help.

  Yes, this processor will work with the material. "But the opinion States: currently, item can be shipped only within the United States.

  Did you read the links (information and motherboard) that lasvegaswireman posted for you?

  Micro-ATX: 24.4 cm X 24.4 cm

  Buy a new motherboard will automatically end the use of the current operating system (ie the XP OS).

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• I would like to create an interactive pdf in Indesign - two guest on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an ext

  Two invites on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an invitation in Indesign, but now how to make 2 copies on a single page that someone else ie the customer can add their own names. So each field name must complete on both guest. Sounds simple, but is not really there to help. I think he called an interactive pdf. Thanks in advance.

  AutoFill is the easiest part, he lies. If both fields have the same name, they will have the same content: type in one and it appears in the other.

• Need to get my old product key for my Dell desktop computer

  Hi, I reinstalled my old Dell with Windows 7 preloaded. and after 5 days discovered that I was one key in the product ID. I'll need another # called product key to activate my OS.

  All links in this site led me to upgrade to Win8. But I need to revisit my old product key. Please tell me how?

  Check at the bottom of your laptop or battery for the COA sticker.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Hi need help of mixture for dissemination, Adtoox Norway

  Have little experience sound mixing, and need help in the right understanding of these specs:

  PPM peak value

  + 4.0 dBu (-14,0 dBFS) PEAK of Maximum sampling

  -7.0 dBFS Leq loudness

  Must be of-22,0 to-17,5 dBFS

  How I understand it, is that the global PB should be under - 14, but there could be a peak of-7?

  Thank you

  PPM peak value

  + 4.0 dBu (-14,0 dBFS) PEAK of Maximum sampling

  -7.0 dBFS Leq loudness

  Must be of-22,0 to-17,5 dBFS

  How I understand it, is that the global PB should be under - 14, but there could be a peak of-7?

  It's a slightly unusual specification has been given to you here! Unfortunately there is no simple explanation of-figure Leq is a weighted equivalent volume level and does not have "peaks" as such at all. In addition, strict, there must be a period of time attached to it, but I think that they have renounced it and said that it applies only to the total duration of your program. What would be more useful would have been loudness ITU specification - R (1770-2 BS) indicated in LUFS - hearing can measure this directly.

  Anyway, all this is a bunch of total uselessness. The idea is that the sound levels of the program should be kept within limits determined that people must keep setting levels of volume on their televisions or radios. Guess what? It does not work! Even with the broadcasters who respect carefully the specifications - such as the BBC - you always get big enough to be irritating variations. They do it for me every Monday evening on BBC2, for example...

  But this isn't just a mouth shot - the most useful thing I can do is give you a link to the BBC document that explains this as clearly as possible. If there are parts that you still don't understand, go back and ask.

  downloads.bbc.co.uk/rd/pubs/whp/whp-pdf-files/WHP202.pdf

• Need help with coding for HTML5 with emergency Flash video

  Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

  

  Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

  Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.

• Newbie needing help.  Looking for options of circle on a form.

  Hey guys,.

  I'm a total newbie to this, but we have been mapping of forms and I need to know how to be able of different options "circle" on a form.

  I think that the best way to do it is to have a button that makes an object visible or hidden circle.  Currently I figured out how to define an object as hidden and do appear on click of a button, but do not make it back to hidden if the button is clicked again.  Several times, it's just a case of yes/no type, but sometimes there are cases where, I have several options where only one can be selected and I wish I could click and circle the appropriate type.

  An example:

  How many cylinders does in your vehicle:

  4-6-8

  and I would like to make sure that if you click on the 4 it surround the 4 and make sure that the 6 and 8 are not surrounded.

  Any help would be appreciated.

  You can use a variable to control for this button allows to swap.

  For example, use a variable as circleVisible = 0 and circleVisible = 1 do when the button is clicked and the circle is visible.

  So you should have something like this, when the button is clicked:

  If (cicleVisible == 0) {}

  circleVisible = 1

  } else {}

  circleVisible = 0

  }

  I have it?  :)

• I have a new laptop with windows 7 when I get on facebook games action lages and do not move smoothly there at - it something I need to download or modify to operate smoothly, it does only with games

  I have a new laptop with windows 7 when I get on facebook games action lages and do not move smoothly is something I need to download or change the settings to make it work smoothly, it does only with games

  burningbush,
  It can also be a problem with the game running through Facebook server.  I noticed a difference in great step lately with Farmville on Facebook compared to when I started playing.  You should check to see if it seems to be the same on the other PC.  I noticed the problem on several machines in different places, so I know that it was not limited to a PC.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with adapters for T60 wireless

  Hello!

  I recently came across a T60 and I need it to be able to 5 GHz Wireless. The wireless current is not.

  I'm not a genius when it comes to wireless cards, where they are and whether or not they are compatible, this is why I come to you! Will you please help me find a wireless adapter which is dual band, so I can connect more than 5 GHz. No price is too high.

  Thank you for your time!

  -Gabriel Ruiz

  Welcome to the forum!

  If you do not use the BIOS modded, search eBay or Google T 42, 0825 , which is Lenovo a/b/g/n card than some T60 delivered with original series.

• Need help with divers for ASUS Intel Socket 775 Motherboard,

  Need help to locate drivers for this motherboard, my external USB hard drives do work not be recognized, no drvers for SM Bus controller, link controller SATA Silicon Image Sil 31 or 32,.

  To help you to download the drivers for your computer, you can check out the link below. You can also contact the Asus Support using the link below.

  http://support.ASUS.com/download/download.aspx?SLanguage=en-us XD

• Need help with MWI for voice mail on SIP with SPA9000

  I can't get my MWI to work with my answering machine SIP.  I have:

  SPA9000

  1 SPA962

  1 SPA941

  My ITSP is Mconnect and my SIP phone number is configured for line 1 on the SPA9000.

  I am using their voicemail.  I want the MWI light only on my phone SPA962.  I packed an id 1101 for this phone's mailbox.  I can press the message button and connect to my voicemail, but I don't get a MWI when I have new voicemail.

  Here are the settings for voicemail, I SPA9000 > voice > line 1:

  Mailbox repository URL: mysiptelephonenumber@line1proxy

  URL for mailbox management: even the form of mailbox repository URL

  Mailbox subscribe URL: it is indifferent to what I put in this context, nothing works.

  MConnect gave me a few things to try, but they do not work either.

  Any help is greatly appreciated.

  Marti

  I googled my question and found the answer here on this forum in a post from last year!  My MWI now works as it should when I have voice mail on my SIP line.

  Here is the link to the post on this forum where I found the answer:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Phones&thread.ID=3899

  Also be sure to enter the URL for the mailbox to subscribe, filing and management.

  Mine are my number of mailbox @ the proxy for the line that my SIP line is activated, which is Line 1

  Marti

• Need help finding drivers for W7 for HP Pavilion a6220n

  I plan to upgrade my HP Pavilion a6220n Vista 32 bit to Windows 7 Home Premium 64 bit.

  I need help to find the drivers for W7. When I go to HP driver download page and select the OS W7 since the menu drop-down it does list all the drivers, could someone provide me a link where I can find all the drivers W7 please?

  I heard that we can use Vista to W7 drivers, is it possible?

  Any help would be greatly appreciated.

  Hello:

  Yes, you can use the drivers Vista for your PC, and it should work fine.

  After have connected you to the internet, windows update will download all drivers windows 7 that may be more current than the vista ones.

  DO NOT under any circumstances to Flash BIOS after installing Windows 7, or you may damage your PC most likely permanently (as in kill him).

  If you find that you need to update the BIOS, do so now with Vista installed.

  Paul

• Accidentally, I purchase an upgrade when I was trying to buy Acrobat Pro. I need help in Exchange for the upgrade to what I need.

  I can't find a certain number of support the customer to solve this problem.

  You can contact the Support from Adobe using link below:

  Contact the customer service

  [Click on always need help button and select the Chat option]

• Need help bridge database for MS SQL Server, error ORA-28546 configuration problems

  Dear all,

  I'm trying to configure Oracle to MS SQL Server(I don't have admin access to the MS SQL Server) database gateway.  When I try to test the dblink connection, I get the following error.

  I published select * from dual@xyz;

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-28511: interruption of the RPC connection to heterogeneous remote agent using SID = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)))

  ORA-02063: preceding 2 lines of xyz

  28546 0000 - ' failed to initialize connection, unlikely Net8 admin error.

  My setup is as follows.

  1 oracle 11 GR 2 under Oracle Linux 6, the same gateway version is installed on the same server but different base directory.

  2 oracle DB base directory is u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is/u01/gateway.

  3. I use the same file listener.ora for db and the entry door.

  4. the content of my listener.ora, tnsnames.ora and the initdg4msql.ora is below.

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  #(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1522))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  )

  )

  MSSQL =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = db.abc.com.tw)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = orcl)

  )

  )

  SID_LIST_mssql =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

  (Program name = / u01/gateway/bin/dg4msql)

  )

  )

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl.abc.com.tw)

  )

  )

  dg4msql =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521))

  (CONNECT_DATA = (SID = dg4msql))

  (HS = OK)

  )

  /U01/gateway/dg4msql/Admin/initdg4msql.ora

  HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST

  # replacement connect format is the name of host/serverinstance/databasename

  HS_FDS_TRACE_LEVEL = 255

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  the dblink is created with the following statement.

  CREATE DATABASE LINK "xyz.abc.COM.TW".

  CONNECT TO ITS IDENTIFIED BY

  With the HELP of "dg4msql";

  Couple of other things I did to check the above works.

  [oracle@db admin] $ ping 192.168.0.1

  PING 192.168.0.1 (192.168.0.1) 56 (84) bytes of data.

  64 bytes from 192.168.0.1: icmp_seq = 1 ttl = 61 time = 7.61 ms

  64 bytes from 192.168.0.1: icmp_seq = 2 ttl = 61 time = 7,41 ms

  ^ C

  -ping 192.168.0.1 - statistics

  2 packets transmitted, 2 received, 0% packet loss, time 1818ms

  RTT min/avg/max/leg = 7.417/7.516/7.615/0.099 ms

  [oracle@db admin] $ tnsping dg4msql

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:53:11

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)) (HS = OK))

  OK (0 msec)

  [oracle@db admin] $ lsnrctl status mssql

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:54:23

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias mssql

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  11-SEP-2013 start date 10:09:46

  Uptime 0 days 0 h 44 min 37 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/DB/MSSQL/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))

  Summary of services...

  Service 'dg4msql' has 1 instance (s).

  Instance of 'dg4msql', status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  Obviously, I'd like to get this configuration to work, but I have also a couple other questions about this configuration.

  1. for the installation of the bridge, he wants to run the root.sh script.  the script root.sh as to what follows.

  Enter the full path of the local bin directory: [/ usr/local/bin]:

  The 'dbhome' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  The 'oraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  The 'coraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  the above answer is correct?

  Thanks for reading.

  The strace shows:

  2796 open ("/ u01/app/oracle/diag/tnslsnr/db/mssql/trace/mssql.log", O_WRONLY |) O_CREAT | O_APPEND, 0660) = 12

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/admin/initdg4msql.ora", F_OK)

  2796 write (12, "2013-SEPT-11 15:02:44 * (CONNECT_"..., 175 ")")

  9564 <... access="" resumed="">) =-1 ENOENT (no such file or directory)

  2796 <... write="" resumed="">) = 175

  2796 close (12

  9564 brk (0x14a3000) = 0x14a3000

  2796 <... close="" resumed="">) = 0

  2796 poll ([{fd = 8, events = POLLIN |}]) POLLRDNORM}, {fd = 11, events = POLLIN |} [POLLRDNORM}, {fd-=-1}, {fd = - 1}]-1, 4

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

  9564 statfs ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/", 0x7fff91f005b8) =-1 ENOENT (no such file or directory)

  9564 open ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", O_WRONLY |) O_CREAT | O_TRUNC, 0666) =-1 ENOENT (no such file or directory)

  => so that it always uses the database as Oracle_home House

  With this info, I rechecked the listener and saw that you are missing the ORACLE_HOME setting in the dg4msql section of SID. Please correct your entry to mssql_sid to:

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = db.abc.com.tw)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = orcl)

  )

  )

  SID_LIST_mssql =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = / u01/bridge)

  (SID_NAME = dg4msql)

  (ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

  (Program name = / u01/gateway/bin/dg4msql)

  )

  )

  Then please stop and restart the mssql listener and check again.

  -Klaus