NEED HELP! HP Pavilion Entertainment PC has no audio

Similar Questions

• HP Pavilion g6 - 2244 has: MISSING AUDIO DRIVER for HP Pavilion g6 - 2244a Windows 10 model #: C4M22EA

  Hello all, I need help please the audio driver no sound, video and Game Device Manager, just updated the windows but no change, please help, thanks

  Gentian01, welcome to the forum.

  When a help request, you must always include the make and model (e.g., p6-xxxx) of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Before you answer, I suggest running Windows Update to see if that solves your problem.  Otherwise, you should go to control panel / sound and check the settings to make sure that they are correct.

• NEED HELP USING VISTA TO BURN/COPY AN AUDIO CD EXISTING

  NEED HELP USING VISTA TO COPY/BURN A CD EXISTING ON A VIRGIN CD

  To copy a CD of Vista, you need 3rd Party Software:

  This one is very good:

  http://www.SnapFiles.com/get/burningstudiofree.html

  Ashampoo Burning Studio Free is a full CD/DVD/Blu-Ray suite which allows you to create data disks, music, video and audio burning. You can also create backups that span multiple discs, rip music from an Audio CD and create or burn disc in ISO or BIN/CUE format images. The task-oriented interface makes it easy to get started and will spare you most of the technical details. Other features include the conversion of files to WAV, MP3, FLAC, WMA and Ogg audio automatic, disk copy compressed backup file and restore, erasing the disc, VCD/SVCD, burning project and support more. Free registration required after 10 days.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Need help on the installation of Realtek HD Audio Device Manager

  I can't install Realtek HD Audio Device Manager, because I get the timeout error. Help, please

  P.S The operating system is Windows Vista Edition Home Premium x 64 and model HP Pavilion a6720f PC.

  I am tempted to download drivers directly from HP for your Audio files.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3853840

  I hope this helps.

• Need help to synchronize video clips and main audio

  I have 20 videos (symbols of the library) from about 400-800 views each. None has its own audio. I want to play in sequence on the main timeline, synchronized to an audio clip that runs along the timeline. The problem is that I can not understand how to stop the timeline to allow the clips to play uninterrupted audio.
  
  At the present time, I have clips play in sequence, I like: each clip on the timeline has a label and occupies 10 images, just so that I can read the labels. The last frame of each clip on the main timeline, I have a stop() on an Actions layer command. The last frame of each MC, I have a command that looks like _root.gotoAndPlay ("nextLabelName").
  
  The problem is the audio on the main timeline plays only for these 10 images, then stops to let each MC to play, which is exactly what I told it to do. How can I get audio from the main to continue scenario to play and keep that it synced to the sequence of MCs? Perhaps, I go about it the wrong way.

  OK, I think I've answered my own question. After some more research in some newsgroups, I found a useful code. Here's what I did, in case someone else has this problem:

  (1) kept just as it was, but removed the audio clip on the main timeline.
  (2) in the library, I went in the binding of the audio settings and he gave a C:\myaudio identifier.
  (3) created a new MC with 1 single framework, in which I inserted this code:
  SND = new Sound (this);
  snd.attachSound ("C:\myaudio");
  SND. Start();
  (4) in the main timeline, I inserted a keyframe, where I wanted the audio to start and drag the new MC to the editing table, off the stage.

  Now the clips play in sequence, the audio plays all the way through, and everything is synchronized. You would think there would be a simpler way to do it... but you would be wrong.

• Need help. This program is a Virus? Pop-ups__Windows XP - Groovy walrus - BACK

  1 wmpscfgs.exe is this a virus?

  http://i259.Photobucket.com/albums/hh282/chips909/pop-up.PNG

  2 svchost.exe is a virus?

  http://i259.Photobucket.com/albums/hh282/chips909/pop-up02.PNG

  Well, I got some virus lately. :/ av.exe and much more.

  I had a few problems if you could help me.
  Theres been more there just very quickly.

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/113d3b55-d4b3-47f1-8d61-c8fdf86d8a1b/#5d486d42-0fc0-4393-9A18-12828db6bae9

  This is my another Post. I really need help.

  This virus has turned off my registry Variables. I get the error message: «Registry editing has been disabled by your Adimn.»
  How can I fix?

  --------------------
  Csrss.exe - Virus?
  Lsass.exe - Virus?
  mbptn.exe - Virus?
  sttray.exe - Virus?
  Smss.exe - Virus?
  Svchost.exe - Virus?
  Winlogon.exe - Virus?
  Spoolsv.exe - Virus?
  bgsvcgen.exe Virus?
  jqs.exe - Virus
  MDM.exe - Virus?
  --------------------

  Please answer this can't is\isn a Virus that I have just listed.
  Thank you
  -Morse groovy-

  Csrss.exe - Virus?

  normally no; See http://www.neuber.com/taskmanager/process/csrss.exe.html
  Lsass.exe - Virus?
  normally no; See http://www.neuber.com/taskmanager/process/lsass.exe.html
  mbptn.exe - Virus?
  normally no; See http://www.neuber.com/taskmanager/process/mpbtn.exe.html
  sttray.exe - Virus?
  No.; See above site (sigmatel audio)
  Smss.exe - Virus?
  normally no; Well that eventually check infection http://www.neuber.com/taskmanager/process/smss.exe.html
  Svchost.exe - Virus?
  No.; Generic Host Process for Win32 Services
  Winlogon.exe - Virus?
  No.; logon XP
  Spoolsv.exe - Virus?
  No.; service of ms coils
  bgsvcgen.exe Virus?
  No.; TMPGEnc DVD with DivX Authoring Authorr3
  jqs.exe - Virus
  No.; Java quick start
  MDM.exe - Virus?
  No; machine debug manager

• I need help unlocking my windows 7 welcome screen, my brother did something and I can't log my computer. My name shows and is LOCKED saids and my password does not work

  I need help unlocking my windows7 someone has something of everything lock my computer I donot the password of my computer, please help me

  Restart the machine should solve the problem.

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us

  My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.

  Not found boot device
  
  Please install an operating system on your hard drive.
  
  Hard Drisk (3F0)
  
  F2 System Diagnostics
  
  "For more information, please visit: www.hp.com/go/techcenter/startup"
  
  I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
  "HDD test failed.
  There is no hard drive.

  I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.

  SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.

  It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)

  Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.

  Any help is appreciated, thanks.

  Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.

  Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.

  https://www.YouTube.com/watch?v=QQx7PlIXFuE

  Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.

  It is an excellent drive at a great price:

  http://www.Newegg.com/product/product.aspx?item=N82E16822236563

  You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

  I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?
  
  Thank you

  Hello

  You are welcome

  If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

  Kind regards

  DP - K

• my hp Pavilion dm1 entertainment pc, has SPACE DISK LOW

  my hp Pavilion dm1 entertainment pc, has SPACE DISK LOW... It is said that my (e) HP_TOOLS is short of space.its becomes red already... I try to run d WinDirStat and here is the result.

  pls help. thnx! & more power!

  

  Hey, lmarie2002. If you notice in the screenshot that you have posted, there is a folder named MARIA-HP. delete this folder. It is a backup of your system and should not be on your E: drive/partition.

• NEED HELP WITH MY HP PAVILION G6

  Hi, I installed an update on my HP Pavilion g6 one moment he keeps saying "FAILED TO CONFIGURE WINDOWS updates updates RESTORE DO NOT turn OFF YOUR COMPUTER" then it restarts and says "INSALLING updated" then he says: "CONFIGURING UPDATES" a return to the first message and continues to turn in circles It has been like this for more than 3 hours, please help someone

  Hello @lisavstar ,

  Welcome to the HP Forums!

  I understand that the computer is stuck in a loop of update. I will do my best to help, but first, I need the following information:

  1. number of the exact model of the computer. If you need help to find this information, please see this site: Product Guide to find your mobile phone number

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. can you computer go into the BIOS?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  5 can you launch the computer in Mode safe?

  In addition, if you can, I would make a system restore. I want that bring you the computer to the earliest possible restore point, in an attempt to Dodge everything that has the problem. Here is a document on how to perform a system restore: System Restore

  Mario

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.

• HELP NEED DRIVER HP Pavilion g4 1214tx

  Good afternoun all master & Member "s in the HP forum, I need help for my laptop HP PAVILION 1214TX G4,

  I try to search web HP can not find, I very sad cause my laptop cannot use Wifi, webcam, no audio etc...

  Thanks before

  Hello:

  Go to the Device Manager and click on each device that needs drivers one at a time.

  Then click on the Details tab.

  In the property drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Those who will identify the model of the devices, and I will send you the links to the drivers you need.

  This package has to get your camera working.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-98402-1&CC=US&DLC=en&LC=en&os=4063&Product=5172243&sw_lang=

  Paul