Need help installing Windows XP, now I have Windows Vista installed.

Similar Questions

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.

• Need help with Windows Vista's "Patience" (64)...

  Hello
  First time here.
  I'm a fan of Patience, and since I have very good results with it, I was wondering;
  is it possible to copy the save queue it?
  In this way, I have a backup, and from time to time I replace a ghost image, rather than tedious maintenance tasks.
  If I replace an image, the current backup file is overwritten, and I have to start all over again.
  Then I would be Grateful someone I could tell my where I can find the current save Patience from Windows Vista?
  It should look like this "Solitair. Solitair Save-ms, "(without the quotes) and I can not find ' m.
  Yet my score is constantly updated, so where to keep Windows file backup...?

  Best regards Carlo
  Don't look at the time where you are facing...

  Hey, it's possible the backup file is a file.  You do a right click on the game to Games Explorer and select replays in the menu, or you can make your way to \Saved games. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Need help from Windows Vista Home Prenium COmpaq CQ6-420 us

  I need help my laptop has only 1 year and the hard drive that came with it is a failure and the warranty is over, I need help

  Buy a new hard drive and reinstall Vista.

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recoveryin case of hard drive failure or System Crash.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• need help with windows live on my Vista free download

  I need help download Windows Live with my Vista operating system.  I get a screen popup telling me to "Get Windows Platform Update."   I have the following message.  When I check all my updates, none of them appear.  What I am doing wrong?

  1. In the list, select one of the following updates. (Only the update that applies to your operating system appears.)

  2. Update for Windows Vista (KB971644) platform

  • Platform Update for Windows Vista x 64-based Systems (KB971644)

  • Platform for Windows Server 2008 (KB971644) update

  • Update for Windows Server 2008 x 64 Edition (KB971644) platform

  Thanks for your help!

  This forum is for Microsoft Security Essentials, not Windows Live.

  You have to get help from Windows Live Support and Forums:

  Here is the Solution Center: http://windowslivehelp.com/product.aspx?productid=10.

  This is the only Forum for Windows Live ID: http://windowslivehelp.com/forums.aspx?forumid=d3fda415-1e53-4007-8e0c-2a77180ffb1d.  This is where you post for assistance.

• I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall? __

  I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Hey ~ I need help in Windows Media Player 12, remove album art!

  Hey ~ I need help in Windows Media Player 12, I got some song I want to add in the album art, but I had a song I add in a hard cover and I can't remove... so pls help

  Hi VX-savers,

  Thank you for using the Microsoft Forum.

  Permanently remove the Media Player 12 album art:

  (1) you can click on View (WMP12),

  (2) choose the columns.

  (3) turn off the Album Art box, and you're done.

  Before performing this operation activate windows to show hidden files:

  (1) open the computer,

  2) click on tools, located on the top toolbar.

  (3) then Folder Options.

  (4) then click on the view tab, and then look for the element that shows the hidden files, folders and drives and check this option.

  This is where the cache. Find and remove.

  Windows 7 Media Center has its own cache of album art, where he recorded the album art thumbnails (Windows 7-cache):

  C:\Users\USERNAME\AppData\Local\Microsoft\eHome\Art Cache
  (with the corresponding "USERNAME").

  For more information : http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/3552ec2d-d510-49ec-985c-1fc04c3d6da6
  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/0b3e71b3-9b85-4d0a-987C-e7b52677840d/

  I hope this helps.

  Thanks and greetings
  Azeez Nadeem-Microsoft support

• I need help installing Acrobat Reader - unable to connect to a DDE server messaged. Cannot access documents

  I need help installing Acrobat Reader - unable to connect to a DDE server messaged. Cannot access documents

  Please see if "acrobat could not connect to the dde Server" when openning Adobe Acrobat PRo XI help.

• Need to download Windows Vista Premium Home Edition

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  Hey mklafert

  Sorry for the eve of Christmas, but there is no legal or free vista doesn't download only internet pirated versions that you would not want t for a gift

  I suggest that you contact acer and ask them to send you a set of disks of replacement for recovery of the acer link below but it will take time

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  But if you can borrow a microsoft dvd vista not acer hewlett-packard or the like discs of recovery of a friend or relative you might try to install vista in this way using your product outside of the laptop case key to install the family version correct vista premium of the dvd, and then go to acer and get the right drivers for your computer laptop model number

  Just make sure you get the good dvd vista

  There are two microsoft vista DVD produced is 32-bit and the other is 64-bit

  most of the computers came with 32 bit installed unless he asked a 64-bit

  and if you happen to also have a recovery on your computer partition acer laptop, you can start the recovery to factory standards by pressing Alt + F10 at startup

  There used to be a password you need to enter too

  It was 5 or 6 zeros

  If necessary, contact acer for this information

  I hope that you have a happy holiday season

  Merry Christmas

  Walter, the time zone traveller

• I need to reinstall Windows Vista to do a reinstall of Windows 7 upgrade?

  I have an Alienware Area 51 750i. He is initially provided with windows Vista but had a free upgrade to windows 7. My hard drive has acted lately and I think to replace. I have to buy a new drive for windows 7 or I can use my old copy and install it on the new hard drive. The computer came with a Windows Vista recovery disk and also the disk to upgrade to windows 7. Thank you

  You can reuse your Windows 7 license on the new hard drive. You need to reinstall Windows Vista on the new hard drive, and then perform a custom installation of Windows 7 during installation of Windows Vista. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Restored for laptop, need to activate Windows Vista product key on the laptop is unreadable

  My computer has been recently completely reset and now I need to activate windows vista again. In order to obtain a sustainable version of vista that I need a product key, however, the bottom of my laptop product key has some unreadable letters/numbers. What can I do about it?

  Hello

  I suggest that you contact the manufacturer of your computer and the recovery order discs form their

  need you normally not a product key to install

  ask them about it

• I need to reinstall Windows Vista, but it's come with a disk when I bought my computer

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  1. call the manufacturer of your computer, ask a set of recovery disks. The entire cost is low and the money is well spent.
  The game allows you to restore your computer. Ask a manul on how to use the recovery discs.

  2. While the site of the computer manufacturer, ask to speak to a technician. Ask the person to teach you how to access your computer, Partition Recovery and utilization of the partition to restore your computer to factory State.

  3. see if you can find a friend who has a Microsoft Vista Installation DVD. Borrow it and reinstall Vista using your product key from the computer.
  If you are lucky enough to a friend, here's the tutorial for pure install using the Installation of MS DVD:
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  4. this link may be useful...
  How to replace Microsoft software or hardware, order service packs and replace producthttp://support.microsoft.com/kb/326246 manuals

  Good luck.

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• Satellite Pro 4200 - need help for Windows 95 & drivers!

  Hello! Years ago my mother, I bought a fully functional, great Toshiba Satellite Pro 4200 working the place taken sales... Since that day, my laptop has not been used. But now, I found a few games nostalgic childhood of mine, who works only with Windows 95. I wanted to play, and I decided to install Windows 95 to my laptop. The installation process went well, it was a bit complicated at first because of the startup disk and such. But I managed to install a working fully Windows 95 in my laptop! But it gives me only 16 colors and no option to choose the resolution! So I found out that I need to install the video card drivers.

  I have google a bit and discovered that my laptop has chart S3 Savage IX. I failed to find the appropriate drivers for it. Until I went to your site to support canada and traveled for a pilot of similar laptops. I found Windows 95-98 compatible drivers for my card. The installation process was easy, is well past and fine! I then could choose 256 colors and another resolution (which I did not actually change...). I changed the colors and then restarted. Everything went well until windows 95 logo screen came suddenly to the top and after that I only saw colors and black borders. He did not start Windows properly. What can be wrong? At I have download the wrong drivers? Windows told me 2 different versions, IX and MX. I tried them both. Tried to change the Hz also, but nothing helped. Please help me!

  Thanks in advance,
  Jupstejuho of Finland.

  P.S Sorry for my bad English...

  Edit: OH, BTW is the exact version of my OS: Microsoft Windows 95 Finnish b with USB support (I Don t know the version very very accurate actually... but I just mention that it is version B of the operating system.) Could this be the problem? I also tried the same driver downloaded from toshiba europe Web site, but it won't let me just install the drivers 'already installed' and they really are. I did not uninstall them, I tried to run the uninstall utility, but it doesn't work...!

  Post edited by: jupstejuho

  Hello!

  Maybe chose a resolution not supported?
  This happens to you at all resolutions, or only one?

  Normally, you can download all the drivers on the European site of Toshiba, but I only find Satellite Pro 4220, 4240 and so far but not 4200.

  However, have you tried to do a BIOS update?
  Before installing the graphics driver, you need to update the version of DirectX.
  You can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye