Need help Kodak 5500 AiO printer over the network.

Similar Questions

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• my hp photosmart c4680 will not print over the network

  I set up the printer on a computer (it prints fine from there) I then shared it on the local network. When I try to print other computers it is said print, computer, it is connected to the so-called print and thus made the printer. but nothing prints help!

  NVM, I thought about it myself. instead of simply cancel the print through the computer job, that I had to cancel the print job directly to the printer. weird.

• How to connect a Windows 7 pc to a Business Inkjet 2800 printer over the network.

  We change Windows XP proffessional x 86 to 7 x 64 Enterprise, and our printers, Business Inkjet 2800 (3 of them) is part of our network. I understand that no drivers are available, so my question is how do we install them? If it's a driver OS, which one is it?

  It seems that your printer is a commercial product.

  You can get a better response by posting in the trade forums.

  http://h30499.www3.HP.com/T5/printers-DeskJet/BD-p/BSC-415#.UGThUE3A9-c

• try to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926

  I'm trying to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926.  When I look for the computer on the laptop, I find, it seems to be fine, but when I print a job, the print job is in the queue on the laptop and does not send the job to the desktop printer.  I had it once before but a relocation removed.  I'm not sure why I see the desktop of my laptop printer but cannot get it working again.

  Any advice?  Thank you

  You need the Windows7 x 64 drivers for the printer (and perhaps software and fimware) installed on your laptop to be able to print using the printer on another computer if he uses another operating system...  Maybe when you reinstalled you forgot to install these things.  Try this and see if you can then print.

  If this does not help, please post in the Forums Windows7; http://social.answers.Microsoft.com/forums/en-us/category/Windows7 where Windows7 experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to recognize the Kodak 9250 AIO printer

  Original title: device

  I can't get my Dell laptop equipped with Windows 7 to recognize my Kodak 9250 AIO printer. I have at least 2 other laptops (1 Dell and Toshiba 1) mapped to the printer, but also a desktop computer. I've never had a problem with the configuration of other computers to the printer. Any ideas?

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to recognize the Kodak 9250 AIO printer in your computer. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. What is the number of the model of the Dell laptop?

  Follow the steps below and mark the question:

  Step 1:

   

  Follow the steps in the link below.

   

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Step 2:

   

  Run Microsoft fix it from the link below.

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/en-us

   

  Step 3:

   

  Follow the steps in the link below.

   

  Find and install printer drivers in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• I need help to reinstall my printer software.

  I need help to reinstall my printer on my computer software, it will not be installed now like originally.  My computer is Windows XP 32 bit Pro.  My printer HP Deskjet 930c/932C/p35c, my cd drive is HP deskjet 932c.  I deleted the printer so that I can reinstall because I sometimes had a problem with my preview before printing and print.  When I install the disk shows up nothing to indicate that the disc has been inserted.

  Hello

  You can download the software to print below:

  http://ftp.HP.com/pub/softlib/software3/dj1162/DJ-20433-1/930-enu-XP.exe

  If the printer is connected by USB, make sure to unplug it and restart your PC before starting the installation.

  Kind regards

  Shlomi

• printer cannot be contacted over the network

  I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. It works from another laptop I have but not my laptop Windows 7.

  I had a similar problem with my new Windows 7 laptop. After a power failure, the laptop would not recognize my HP printer and the error was that "the printer cannot be contacted over the network" so I spent a lot of time to solve the problem. Finally helped the simplest thing was that I removed this printer in my list of printers and added again using the "Add a printer" Wizard and it worked perfectly!

• I can't get my printer to connect to my laptop. It is said repeatedly 'cannot be contacted over the network, the network administrator.

  No matter what I try, I can't have my printer to connect to my laptop.  Continually, he said "cannot be contacted over the network, the network administrator.  I made this and conducted many helps out.

  What can I do now?

  Thank you.

  Pamela

  Hi Pamela,.

  This must be different. Rest assured that we would do our best to help you.
  
  Please answer the following questions that would help us to understand the issue.
  1. What is the brand and model of the printer?
  2. What are the troubleshooting steps you have tried so far?
  3. were there any changes made to the computer before the question?
  4. how you try to install the printer?
   
  Read the following article that helps you identify and fix common printer problems in Windows.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  If you have any questions do not hesitate to answer, we would be happy to help.

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• I can restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?

  WHS backup

  You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011?  Or do I need to copy the files over the network of old serevr again?

  Hello

  Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you