Similar Questions

• HP Pavilion dv7: enter the password administrator or power on password

  The code that I get after trying 3 times is 71781847.

  Thanks for your help.

  Hello

  Enter: 64689289

  Kind regards

  DP - K

• HP Pavilion dv7 for the radiator/fan

  I'm trying to figure out how to disassemble my hp Pavilion DV7, but I cannot find anywhere how to do for my particular model. The precise model is

  HP Pavilion dv7-7121nr

  Hello

  I had this procedure for your model for the replacement set of heat sink of the:

  Fan/heat sink assembly removal

  CAUTION: Follow all precautions during the removal and replacement of components:

  http://h20574.www2.HP.com/Media/75D38F6E-BCDA-4E84-961B-F3BF5454EA2B/en/yea_fru_popup_precautions-en.htm

  Before you begin: remove the battery, the door, the optical drive, hard drives, LAN module wireless, RTC battery, keyboard, cover and system board.

  Disconnect the fan cable from the system board.
  Loosen the four Phillips screws P1 captive who set the heatsink to the motherboard in the order in which they are labeled.
  Because it is a map of the graphic system, loosen the three Phillips P1 additional captive screws that attach the heatsink to the motherboard in the order in which they are labeled.

  NOTE: Graphics system UMA cards do not contain these extra P1 Phillips three captive screws.

  Lift the heatsink off the system board.

  NOTE: Due to the adhesive nature of the thermal equipment located between the processor and the heat sink, closed effort may be needed to remove the heat sink.

  Fan/heat sink set replacement

  NOTE: Before replacing the heat sink, the thermal material should be replaced. The thermal material must be replaced each time the heat sink is removed.

  Carefully remove the old thermal grease from the heat sink, the processor and discrete graphics models, the graphics processor with an alcohol swab.
  The thermal paste applicator allows to apply a sufficient amount of thermal grease to the center of the processor and discrete graphics models for the GPU.

  Align the heatsink on the processor and the screw holes.

  Tighten the four screws P1 captive who set the heatsink to the motherboard in the order in which they are labeled.
  Because it is a map of the graphic system, tighten the three Phillips P1 additional captive screws that attach the heatsink to the motherboard in the order in which they are labeled.

  NOTE: Graphics system UMA cards do not contain these extra P1 Phillips three captive screws.

  Connect the fan cable to the system board.

  Kind regards

• Pavilion dv7: enter the Administration password or power on password

  Hallo...
  My computer is blocked and on my screen, I get the Message "password entered Administration or power password"... After a few attempts, I get the message 'system turn off' and the Code 67724899...
  Can someone help me please...?

  @Manousissoti

  Enter: 78682219

  Kind regards

  DP - K

• Pavilion dv7: enter the password administrator or power on password

  Hi all

  After a total given I have to enter password administrator or power on password, but I haven´t it.

  After three missing passwords I turn off the system and the key: 55001602.

  Can someone help me?

  Thank you

  @Th99

  Enter 40969224

  Kind regards

  DP - K

• Need HELP with Hp pavilion dv7-6195us

  Hello. Recently I have intalled new version of windows 7 ultimate and I accidentally deleted the recovery partition. so I tried to install the drivers from the Hp support center, but it is not reconises my graphics card, I tried to use a care assistant, but that did not help either. Please y at - he a person who can help?

  Thank you for your effort

  Great!

  Ok. Thanks for the informative image.

  Install this driver for the Intel HD graphics card. Then install this driver for the mini-PCIe Radeon HD graphics adapter. The latter should give you the switchable graphics option in the Catalyst Control Center.

  Best regards

  ERICO

• URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro

  Dear helpdesk,

  URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro...

  Send me the link for the driver or compatible.

  or email to: [email removed for privacy]

  Kind regards

  MRZ

  Message edited by SandyD on 25/11/2009 14:01

  Thank you

  but I can't download link for LAN

  FTP://ftp.HP.com/pub/softlib/software10/COL30407/PV-75371-1/sp44423.exe is not available.

  and I need driver motherboard chipset

  Help me.

  MRZ

• need help, my HP Pavilion G6 1350SD gice disabled system

  need help, my HP Pavilion G6 1350SD got locked, it says code system off: 60002639, can anyone help?

  Welcome to Zephyr. Try.

  75960219

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• PAVILION dv7-1232nr, the sound signal is displayed on the screen when changing volume disappeard.

  hp pavilion dv7-1232nr, the volume signal which appears on the screen at any time the volume is set does not work as before! y at - it a point or the option which is in klicked on or off to turn off this signal!

  Hello

  If you have a MediaSmart software installed on your portable computer, the volume OSD (on-screen display) is provided by HP MediaSmart SmartMenu - you can download and reinstall this app from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45140.exe

  When the installation is complete, restart the computer and let Windows load fully before checking if it works fine now.

  Kind regards

  DP - K

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• I need help to unite 2 users on the same CC account, can someone help me?

  I need help to unite 2 users on the same CC account, can someone help me?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7

  I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7

  Error code 1 is often associated with permission issues. Have you tried to install Illustrator in a new user account with admin rights? If you want to download CS6, here's how to get it through creative cloud: html http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications.

  Let us know how it goes.

  Concerning

  Stéphane

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• Pavilion Dv6: Replace the cooling fan

  I need to replace the cooling fan. Please provide the manufacturer for notebook described below.

  Pavilion Dv6-6135TX

  Product # QC328PA #ABG

  Processor: Intel Core i7-2630QM CPU @ 2.00 Hz

  Installed memory (RAM live): 8.00 GB

  Thank you in advance!

  Dear customer,

  Please try the steps below to determine the size.

  1. Open the control panel.
  2. Select display.
  3. Select the screen resolution.
  4. Select Advanced settings.
  5. Select the map tab. Here, you'll see how much of total graphic memory available with dedicated video memory is available on your system.

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we