Need help Reparing via USB/burned disc with ISO

Similar Questions

• NEED HELP USING VISTA TO BURN/COPY AN AUDIO CD EXISTING

  NEED HELP USING VISTA TO COPY/BURN A CD EXISTING ON A VIRGIN CD

  To copy a CD of Vista, you need 3rd Party Software:

  This one is very good:

  http://www.SnapFiles.com/get/burningstudiofree.html

  Ashampoo Burning Studio Free is a full CD/DVD/Blu-Ray suite which allows you to create data disks, music, video and audio burning. You can also create backups that span multiple discs, rip music from an Audio CD and create or burn disc in ISO or BIN/CUE format images. The task-oriented interface makes it easy to get started and will spare you most of the technical details. Other features include the conversion of files to WAV, MP3, FLAC, WMA and Ogg audio automatic, disk copy compressed backup file and restore, erasing the disc, VCD/SVCD, burning project and support more. Free registration required after 10 days.

  See you soon.

  Mick Murphy - Microsoft partner

• need help to set up Linksys printserver with verizon wifi hotspot

  need help to set up Linksys printserver with verizon wifi hotspot

  pfsjmhall,

  Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.

  Then configure the Linksys print server. Find your network to give your passkey (password)

  Then set up the printer, choose network and follow the instructions.

  Rick

• Please, need help printer. Nothing to do with Security Update 2009-001.

  I need help, and looking for the forums just makes me worse headache. I need to use passthrough printing, but the Mac printer does not in the comments.

  Details: OS X 10.5.6 Fusion 2.0.2. Guest is Windows 2000 SP4. Security Update 2009 - 001 has not been applied.

  The printer is a HP PhotoSmart C4480 printer attached to the Mac via USB.

  In order to avoid the obvious questions:

  Passthrough fusion printer is active. Become disabled as some users report. The Serial Port is present and connected. In OS X printer sharing is enabled in the world and for this printer (but my impression is that it should not be).

  I confirmed that the printer works from OS X. And he is listed in the merger USB menu.

  The process of Thinprint TPAutoConn * are underway on the guest. COM1 and COM2 are both present.

  The user can not use the old printer sharing solution because there is no Windows 2000 for this printer drivers. The VM is totally dependent on the system of Thinprint, and I never put in place before. Have never seen a working configuration. Don't know about its configuration beyond what is in the VMX file and upgrade manual.

  There are merger Console messages that say "no printer configured or unavailable." I think it's the key to the problem... but I don't know what to do about this.

  Help...

  Fuzzy-wan says:

  Pat Lee says:

  We have designed this feature to Windows XP and later versions. So it will not work on Windows 2000.

  Hmmm. Woody didn't say exactly if the printer actually prints

  Well I wouldn't went all the trouble to clean the building a Machine virtual Windows 2000 Pro SP4 with VMware Tools installed and printers enabled for the Virtual Machine settings and took all the dialog boxes and to make a film of the if I did had not bother to actually check and see if she would print!

  Find attached an image of a Windows 2000 printer print Test and note the relevant information.

  Computer name: W2KVM

  Name of the printer: HP LaserJet 4050 on MacBook Pro

  Printer model: TP output gateway PS

  Support: Yes

  Port name (s): THIRD:

  Note: because the printer is a B & W LaserJet I guess that the "support: Yes", it's that the "printer model: TP output gateway PS ' supports color and will therefore work with color printers as well.

• Problems burning discs with toast

  I have problems burning discs using toast. I had with my old Toast 10, and the problem persists despite an update of Toast Titanium 14, so I assume that the problem is with my mac and not the toast. This happens with all types of disks, but is less common with data records that are not too big. I receive pop-up messages such as: -.

  Sense Key = MEDIUM ERROR

  Sense Code = 0x0C

  WRITE ERROR

  I have defraged my drive and controls with TechTool Pro, but it does not help.

  Any ideas?

  Thank you

  Rob

  

  This error is a response is received from the reader, by Toast.   This means that the drive has reported a class specific (key) and error type (code).  In this case, involving a class of errors appearing with the recording medium and the specific error returned is a clerical error.   This means that the write failed.   Why writing has failed is not returned, neither the player nor the Toast in particular knows that.

  Apply current patches for your version of Toast, if you are not already underway.  This may correct the incompatibilities with some kind of recording media and some readers work.  There is much more variability here with the media and readers than most people imagine.   Try another drive for registration.   Try different media - an any other brand, preference.    Try a cleaning optical media disc.   Dusty heads can cause this type of error.  Definitely try record to the low speed allowing the unit and the way, too.

  So - if the above fails, please report the problem and specific recording media used (it can be data saving these settings on optical, data supports that aimed to help the reader to adapt to specific media) and the optical drive model, for the folks at Roxio.

  Defragmenting disks and technology tools and the rest probably aren't relevant here, unfortunately.  (I don't remember offhand if a failure to get pretty quickly the data on the disk - defragmentation is intended to address - indicates an error in writing or not, but I wouldn't bet on that there is correspondence sane with any of the optical device errors.)  Optical drives are basic devices and semi unreliable in general, no two revisions of the firmware on the optical drives are never the same and sometimes not even two disks with the same firmware revision, optical drives getting harder and more fragmentary with age, and optical media itself can be wonderfully flaky.   That to have written more than a small optical recording software.)

• Need help. import of images in timeline with different length.

  Need help can't find old toturial
  I'm doing a model for a photo film where I have everything ready so I just need to add 250 pictures and then it will automatically move the photos to the beat of the music. Once, I saw a toturial how to do this but can't find it. It's something with manual adjustment of markers to the music beat and then just add all the photos. but I must have missed something pls help...

  Bo

  Its called automate to sequence with no numbered markers.

  http://TV.Adobe.com/watch/learn-Premiere-Pro-CS5/GS04-making-a-rough-cut-in-Adobe-Premiere - pro.

  http://help.Adobe.com/en_US/PremierePro/CS/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html

• need help to set up Time Capsule with hub of sky

  Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

  El Capo can be really rotten networking.

  The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

  The TC may work very well in this configuration.

  Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

  So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

  Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

  

  The configuration... make the TC must go to bridge mode...

  It is Off (bridge mode) on the network tab.

  And you need to create a wireless network with a different name to the skyhub.

  You can probably do it manually now without too many problems.

  And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

  Click on the TC icon in airport utility.

  

  Click on change... at the bottom right on the summary.

  Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

  

  Click on wireless and fix that up.

  

  You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

  NOT RECOMMENDED APPLE NAMES that are FALSE.

  If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

• Need help to use a recovery disc for v3 - 551

  Sorry for my English, still a student.

  OK, so after having received these 5 discs, one being the system disk, recovery of 1, 2, 3 then language pack.

  The problem is I deleted my partition on the HARD drive so that I have order the recovery disk because apperently I can restore my system with the factory settings. The instructions State to

  1: Insert the disc labeled System.

  2: reboot the computer and press f12

  3:when you are prompted for the recovery disc, remove the system disk and insert the first disc of recovery. blah blah ect

  So apperently I have the "system disk" boot up first then I can use the recovery disks. The problem is that I am unable to because in order to start this system disk, I need to set up in the UEFI bios 'comes like this to factory settings' that's fine. Boots/loads fine then once for the disc to load Finally I gives me two options.

  1: new installation of system disk C:

  2: restore all partitions of HARD drive (it's what I want), but once I chose option 2 I get the notice "Please start this recovery disk using BIOS legancy mode. I even then choose option 1, same message.

  If I change the settings of the bios to legancy I can't load the disc then get this message 'WARNING fail' telling me I need UEFI mode.

  So, uh, Yes, ideas?

  system partition MBR table on EFI System... windows 8 TPG... Well hit me further in the head. Fixed, in reading your link. Thank you. Once I formatted the HARD drive by using windows disc 8, restoring the system started working. I had formatted HDD previously with windows 7 disc. I know...

• Need help to edit and burn my music on my CD

  Original title: editing music

  I recently downloaded a soundcloud mix dj for my laptop and I would now like to burn the mixture on a CD. Unfortunately, the mixture is 3 hours. How can I change the mix? I want only the first hour to burn to cd.

  Any help would be appreciated.

  I don't know how she copes with large files, but you can change some music sounds / and cut out the pieces with free audacity - http://download.cnet.com/Audacity/3000-2170_4-10058117.html for the info and a download link.

  As always just to play safe and recheck, AV check any file you download before installing it.

  I hope that you can get other suggestions as well, but I think that audacity will do what you want. It may have problems, maybe file etc. format depends on

• I need help, how to configure virtual machines with PowerCLI IP addresses

  Hi all

  I open this topic because I really need your help.

  I wrote a script that can automatically create 10 VMs on my ESX Server.

  I run the script with PowerCLI.

  I want now to help script, give the ip on the 10 machines created settings.

  I don't know how, can you enlighten me on this subject?

  Is there a script that can do this?

  Thank you very much.

  Isn't the "0.2 | ForEach-Object {"a loop for? IMHO, it is a loop in the PowerShell way.

• NEED HELP URGENT! Folio in PDF with Full-Paged background pictures are not sharp.

  Hi all

  So already I was allowed to create a version of SD and HD of my magazine app (Single-Edition with CC of course), but I'm now ready to explore the areas of the design of a single PDF, folio, which is supposed to be just as keen on the retina as well as the mini iPad iPads and lower.

  I tend to use a lot of images full paged in my design and while testing on my iPad retina via Content Viewer, I already spotted that my paged images are not as sharp. It really bothers me!

  In InDesign, I see the iPad preset (1024px 768px), folio Viewer used is the current v. 26 and all items, but also the folio itself, is made in PDF format.

  Finally, (it's the bit I'm also not too sure of), I use images high resolution and I'm affecting the native 246-iPad retina ppi ppi. Is this fair? I set my expectations too high?

  HELP PLEASE!

  Images in PDF folios are pixelated to 108 ppi. To halfway between 72 and 144.

  I don't know what you expect here.

  Bob

• Need help on how to make dll with VC ++ 2008 for Labview function liblary

  I use VC ++ 2008Express and you want to make the DLL.

  Since I'm using VC ++ 2008, do I have to install the 'MS redistributable"on PC what dose does not have VC ++?

  Is there any free ANSI C compiler do DLL for Labview for use with the function call in libraly?

  Yes, you will probably need the Redistributable Package. Remember to distribute the "Final" of the DLL and not the "debug".

  Regarding the free ANSI C compilers, I'd do a Google search. GNU C/C++ is a very popular.

• Need help of payment services - native Core with Cocos2dx

  I create games with cocos2dx on blackberry 10 with in shopping, I sell the virtual money in "Cash" on my game.

  I use before local mode and then I try to use the sanbox.

  I successfully download my games on the world of blackberry with account sanbox blackberry, already downloaded my game on the world of bb and digital products is valid...

  But my problem is:

  When the purchase is successful (good and good, ID etc. is valid), I don't get money "Cash" (my money does not increase on my game store).

  I have references already opened two link on cocos2dx, but I can't get the solution:

  http://supportforums.BlackBerry.com/T5/native-development/A-post-mortem-supporting-in-app-purchases-...

  http://supportforums.BlackBerry.com/T5/native-development/is-it-possible-to-use-PaymentService-with-...

  There's an idea on the code of validation when the purchase is successful? THX

  This is my code:

  CCEGLView * eglView = CCEGLView::sharedOpenGLView();
  eglView-> setFrameSize (600, 1024);

  bps_initialize();
  paymentservice_request_events (0);
  paymentservice_set_connection_mode (true);
  purchase_arguments_t * args = NULL;
  paymentservice_purchase_arguments_create (&args);)

  paymentservice_purchase_arguments_set_digital_good_id (args, "xxxxxxxx");
  paymentservice_purchase_arguments_set_digital_good_sku (args, "xxxxxxxx");
  paymentservice_purchase_arguments_set_digital_good_name (args, "100 Cash");
  paymentservice_purchase_arguments_set_metadata (args, "Purchase of the sample");
  paymentservice_purchase_arguments_set_app_name (args, "Sample game");
  paymentservice_purchase_arguments_set_app_icon (args, "http://www.rim.com/products/appworld_3col.jpg");
  paymentservice_purchase_arguments_set_vendor_content_id (args, "xxxxxxxx");
  paymentservice_purchase_arguments_set_vendor_customer_id (args, "Customer-provider-ID");
  paymentservice_purchase_arguments_set_extra_parameter (args, "extrakey1", "extraval1");
  paymentservice_purchase_arguments_set_extra_parameter (args, "extrakey2", "extraval2");
  paymentservice_purchase_arguments_set_extra_parameter (args, "extrakey3", "extraval3");

  unsigned request_id = 0;
  If (paymentservice_purchase_request_with_arguments (args)
  ! = BPS_SUCCESS) {}
  fprintf (stderr, "error: purchase requisition has not.") \n") ;
  }

  Your code is infinitely loop to read the events? The response of purchase may not be the first back, if you read you the event once after the purchase is attempted then it would make sense that the event is so lost.

  You need to code is a loop to continuously listen BPS events.

• Need help to make my printer work with the new laptop.

  I just bought a laptop ACER Aspire V5-571. At the Windows experience index. Intel (R) core, 64-bit. My current project is gettting my 2005 Dell all-in - one 944 to work with my new laptop. I passed on the line and installed the recommended driver and used the printer to scan a document I then sent an email, but for some reason my computer any it will not print a page from an online account. Keeps saying needs of troubleshooting and I need to download the driver, which I did, a Vista 7 64-bit-compatible driver. How can I make this work? or what other driver or update do I need?

  It seems that Vista drivers are the latest Dell has provided.  I noticed that, they say, you have to install all the drivers for this device before installing the Vista (s).  I found the link depending on whether you should check out

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?&docid=270659&doclang=en

  Some older printers have no Windows 7 drivers, but usually the work of those of Vista.  If they are not, you can use XP mode if you have the professional or Enterprise version of Windows 7 Ultimate.  If you have the Home Premium version, you can use him anytime upgrade to professional for $90.  Of course to buy a new printer is always an option too.

  As you probably know, it is the responsibility of the manufacturer to provide drivers.  Many manufacturers have refused to provide any Windows 7 drivers for older devices.

  Good luck.

• I need help to create my backup discs if you please.

  I just bought my HP Pavilion Dv7... I started to create the recovery discs... the Recovery Manager asked 3 DVD for backup... I put the first and after writing files had finished, he asked me to add the 2nd DVD... until now everything is ok.

  then I put the second DVD it finished writing files then I got this message "disk 2 of 3 has been successfully created, reinstal the disk that you just wrote and close the CD tray" I closed the drive tray, but nothing happened and the program remained as it is for a long time, so I put the third DVD "in white. , but nothing has happened... so I cancelled the operation and he reiterated several times.and whenever he starts to write the second DVD again and give the same message at the end... I spoiled 3 DVD until now... I need to know what to do? ....

  try using dvd + r dl disks rewirteaable.  All disks must be the same.  Good luck