Need help to choose a DVD burner.

Similar Questions

• need help with nero kwik dvd burner to the top and running.new nget computer appreciate any help

  new computer, need help for nero dvd borning kwik place and ongoing, as if I wanted to get stuff for my grandchildren, any help really appreciated. Thank you

  http://www.Softpedia.com/get/portable-software/CD-DVD-tools/Windows-portable-applications-portable-AmoK-CD-DVD-burning.shtml

• Need help to replace my DVD burner in the Acer laptop

  Hello

  I have a laptop Acer (TravelMate 5720) running in very good condition I bought about 7 years back!

  However, the motor in the DVD player does not now - he is gone and must be replaced by a new DVD burner.

  When I checked on eBay to buy a new DVD burner for this model, there are 2 types sold either IDE (PATA) and SATA DVD burners. I don't know which of those above my laptop supports.

  I checked the properties of the CD drive in my computer and it says "hl-dt-st dvdram gsa-t40n ata device.

  How will I know which of the 2 above that you buy... ??

  Kindly help me. Let me know in case additional specifications are necessary on this you.

  -Mr. Abed

  You must remove the unit from your laptop. You will immediately see if it has an IDE or a SATA connector. See Wikipedia so not sure what these connectors look like.

• Toshiba DR570 - need help to identify a DVD burner

  I recently bought a Toshiba DR570 and have been very happy with it so far.
  The only problem I have is that I can't get my DVD from PC Player to see the disc.
  Not even after a firmware upgrade on my older PC, any more than see it my new laptop. I also tried several computers at work all to nothing does not.

  I know that compatibility can be a problem between DVD recorders and DVD from PC reader/writers, and I think that is what is happening here. I think that if I knew exactly what model burner DVD Toshiba uses in the DR570 my problem would be solved.

  I might just get one and connect to my motherboard if it is an IDE or SATA drive.

  I called customer service and no luck. Can someone help me find this information?

  Oh I'm scared, you're on the wrong forum. Here is the discussion on computer Toshiba mobile.
  If nobody here offers help trying on some Hi-Fi forum.

• Need help on choosing 11.1.2.3.500 or 11.1.2.4 for Hyperion financial planning project

  Need help on choosing 11.1.2.3.500 or 11.1.2.4 for Hyperion planning project implementation.

  Currently, we are debating on the following points, so need for expert advice, if someone have already done this.

  • As all our previous implementation are on 11.1.2.3 500 and we know with certainty, it is stable
  • 11.1.2.4 is fairly new in the market

  That said y at - he already put 11.1.2.4 implemented for the PPP in particular, if yes how is the stability. As we have hard time have no place for the bugs that deals.

  Thanks in advance,

  Deker P.

  I don't think that 11.1.2.3.500 for planning is massively different the 11.1.2.4 so for stability, they should be similar, the improvements are mainly around the simplified interface.

  I would recommend going with 11.1.2.4, he is already on his third patch for the planning so I hope that all important questions will have been met, if there is a concern, then perhaps you should look at POC.

  See you soon

  John

• need help to put recorded DVD on computer

  I tried to put a DVD saved on my computer, but it seems to be something wrong. Is that what all can someone help me with to help me put this DVD on my computer so I can make a copy. Thank you

  I tried to put a DVD saved on my computer, but it seems to be something wrong. Is that what all can someone help me with to help me put this DVD on my computer so I can make a copy. Thank you

  ==============================================
  When the copy of a home made copy unprotected
  DVD.. .the work of freeware for me... maybe later
  It might work for you:

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy...

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Ignore most of the download buttons and click to the left of the
  green circle with the white arrow... He says...
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Need replacement for M70 - 191 DVD burner.

  My DVD burner on my M70-191 (has my * a UJ-8415) refuses to recognize most CD and fails when you try to burn the DVD, with various errors. I've tried different types and different burning software. Re-installed, cleaned up by car drivers. No luck.

  So, I'm looking for a new drive... where can I buy a suitable replacement?

  Hello Steve

  First of all, I think you should buy the same drive. Doing this will allow you to possibly avoid compatibility problems. I have too many Satellite M70 and the optical disk drive is really good.

  I advise to use Google and you will find many online shops where you can order the new ODD.

• Need help to choose the dimensions of the file menu dvd

  Hello all, I usually just wing when it comes to file size being put on video and then set above the video.  As they are usually for my own videos and I don't really mind a bit wider.

  However, this project is a concert paying top and I want it to be perfect.

  I'm doing a menu dvd / overlays of text for this video

  The video is 1920 x 1080 | by 1

  

  Should I get pixels square in photoshop? PPI - it is my understanding that this is not serious digital project? also offers 16 8-bit color depth?

  All the information you need are in your attachment. Pixel dimensions, 8 bits per channel and the frame rate also known as the fps (frames per second). The PPI is not relevant given that you do not print.

  The pixel dimensions indicated in your attachment are for HD video. Just to let you know.

• OK... whenever I go to the creation of windows dvd, I select all the files and all the items, I would like to add... the style of the menu favorite... but then I click on burn, then it is said that I have to choose a dvd burner or make sure that one is in

  Windows vista DVD maker, home premium one... I used it before and it even worked... but now it doesn't, and the sign above keeps poping up

  Hello

  I just fix and I want to help other people to:

  I'm using Win7 x 64 RC

  the same clean "BURNER NOT FOUND"!

  1 - Go to the Device Manager "do right click in the icon my computer."
  2 - Select DVD /CD-ROM
  3. disable all virtual rom you like "farston Virtual cd or dvd driver image.
  4. it will be said, you need to restart your PC after a reboot, your DVD maker it will burn corect!
  and now im burning my DVD!
  After that finsh, you can re-enable the virtual DVD/Cd...

  I know its annoying whenever you want to create a dvd, you need to do this step! and if I find another solution, I'll post it here...

• I NEED HELP TO CHOOSE A NEW LAPTOP!

  I recently bought a HP laptop, and in the first month, it was returned three times for problems and different issues.  After countless hours talking with the staff of the it Department got the opportunity to get a new laptop.  The only problem is that they do not have the same laptop I purchased available.  Mine has the following: AMD Athlon 64 X 2 Dual Core processor TK-57 and 512 (1.9 GHz), 250 GB HDD, Super Multi 8 x dvd = r/rw Double layer, 4096 MB DDR2 SDRAM, Vista premium (64-bit) and everything else he HP come with.  It's a dv2941se.  HP wants to give me dv4t with: (32-bit), 2.0 GHz processor, 3 GB memory, 320 GB 9200 graphics card hard drive, same primary super multi 8 x, HP HDTV hybrid Tuner, a high capacity cell 6, and then all the rest of the normal devices for the computer.  I need to know if it's a good thing and a fair trade.  I don't know what to do!  I don't like that they me downing to a 3 GB and do not allow me to get even a special edition.  Help, please!  I HAVE UNTIL MONDAY MORNING TO MAKE A DECISION.

  The T6400 is a processor Core 2 Duo is a 64-bit processor, which is an improvement of AMD. We have a guy who post here a little which I believe can work for AMD and he can jump in and challenge me, but the Intel Core 2 Duo processor is faster at the same clock speed, cooler, quieter and has longer than AMD. 3 concerts vs 4 is not really a big deal except that now you mix a stick of 1 gig and 2 gig stick and you will lose support for memory dual channel and Vista 32-bit vs 64-bit Vista will be actually more compatible software and devices, but is a little slower than 64-bit. I think overall you did a side passage or improving slightly, however, simply by the fact you get a current generation machine. The new laptops HP dv5, dv5 dv7 series beyond the problems that plagued the series dvxxxx. And most of the problems in this series were the AMD models. You may not use 4 GB of RAM, unless you get the 64 bit version of Vista, in any case, but it is better to have 2 identical, memory sticks so that it works in dual channel so 4 gigs is better even with a 32-bit of Windows that uses only 3. Do they not have to offfer you with 4 GB of RAM? If this isn't the case, you could update these days for like $25.

• Need help to import the DVD that I made using Windows Movie Maker

  I made a slide show DVD in my computer XP using WMM. I thought that I taped on the C drive first, but I can't access either one to make changes. I can view the DVD using Windows Media Player, but I want to change it

  For a re-release in Movie Maker, you need the. MSWMM
  project folder. Do a search for your folder my videos and
  see if you can find it... Maybe you saved before you
  created the DVD.

• I bought an Aspire One opportunity and need help to choose the right RAM upgrade.

  I bought an Aspire One opportunity. On the device, the model number is listed as AO532h-2588. When I enter the S/N and look it up on the Acer website it is listed as AO532h-2Db. I want to move the RAM to 2 GB. Former model, then tried to keep the cheap. I see 200 pin DDR2 667 MHz PC2-5300 SODIMM as given common spec as far as RAM goes. Even through different products of PC. Is this all I get? That the annex-2588 or - 2Db question of difference in the review of correct choice? Thanks for your help!

  I need to stick with 200 pin DDR2 667 MHz PC2 - 5300 SODIMM? Yes

  But I can go up to 800 MHz. good. PC2-5300 and SODIMM is critical to search? No, but it will be worse to run (little).

  Look at the essential link.

• Need help to choose rpms suitable for kernel 2.6.9 - 89.EL

  Hi all;

  That's my goal of testing and learning.

  # cat/etc/redhat-release

  Release of Red Hat Enterprise Linux AS 4 (Nahant update 8)

  # rpm - qa | grep oracleasm

  # uname - r

  2.6.9 - 89.EL

  I'm confuse download RPMS required to configure ASM.

  Oracle ASMLib downloads for Red Hat Enterprise Linux 4 AS

  Drivers for the 2.6.9 kernel - 89.EL

  • oracleasm - 2.6.9 - 89.ELxenU - 2.0.5 - 1.el4.i686.rpm
  • oracleasm - 2.6.9 - 89.ELsmp - 2.0.5 - 1.el4.i686.rpm
  • oracleasm - 2.6.9 - 89.ELhugemem - 2.0.5 - 1.el4.i686.rpm
  • oracleasm-2.6.9-89.El-DebugInfo-2.0.5-1.EL4.i686.rpm
  • oracleasm - 2.6.9 - 89.EL - 2.0.5 - 1.el4.i686.rpm

  I need to download top RPM or RPM specific or need some other RPM packages also?

  DETAIL OF THE ERROR

  ---------------------------

  # rpm - ivh oracleasm - 2.6.9 - 89.EL - 2.0.5 - 1.el4.i686.rpm

  WARNING: oracleasm - 2.6.9 - 89.EL - 2.0.5 - 1.el4.i686.rpm: V3 DSA signature: NOKEY, key ID b38a8516

  error: failed dependencies:

  oracleasm-support > = 2.0.0 is needed by oracleasm - 2.6.9 - 89.EL - 2.0.5 - 1.el4.i686

  Hello Pavan,

  Pavan Kumar says:

  You can try oss.oracle.com

  https://OSS.Oracle.com/pipermail/El-errata/2008-November/000782.html

  For the Enterprise Linux 4 2.6.9 kernel version - 78.0.0.0.1.EL:

  i386:

  oracleasm - 2.6.9 - 78.0.0.0.1.EL - 2.0.5 - 1.el4.i686.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELhugemem - 2.0.5 - 1.el4.i686.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELsmp - 2.0.5 - 1.el4.i686.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELxenU - 2.0.5 - 1.el4.i686.rpm

  x86_64:

  oracleasm - 2.6.9 - 78.0.0.0.1.EL - 2.0.5 - 1.el4.x86_64.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELlargesmp - 2.0.5 - 1.el4.x86_64.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELsmp - 2.0.5 - 1.el4.x86_64.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELxenU - 2.0.5 - 1.el4.x86_64.rpm

  IA64:

  oracleasm - 2.6.9 - 78.0.0.0.1.EL - 2.0.5 - 1.el4.ia64.rpm

  oracleasm - 2.6.9 - 78.0.0.0.1.ELlargesmp - 2.0.5 - 1.el4.ia64.rpm

  SRPMS:

  http://OSS.Oracle.com/EL4/SRPMS-updates/oracleasm-2.6.9-78.0.0.0.1.El-2.0.5-1.EL4.src.rpm

  -Pounet N

  Help me a lot.

  http://OSS.Oracle.com/EL4/SRPMS-updates/oracleasm-2.6.9-78.0.0.0.1.El-2.0.5-1.EL4.src.rpm

  Is that contain all 32/64-bit kernal?

  Where is the exact source?

  > is this right or other links?

  https://OSS.Oracle.com/EL4/SRPMS-updates/

• Need help dv4t - remote and DVD playback software

  Hello

  I have a new 1400 dv4t that came with Vista Home Premium 64-bit. I did a clean install of Vista Ultimate 64 bit and realized that some drivers and software are missing on the HP website. My remote (it has media player, dvd and volume buttons) does not work. In addition, the laptop came preloaded with some software for playing DVDs that worked very well with my remote control, but I couldn't find any dvd playback software to the HP Web site. Chat and phone support with HP was not supportive.

  Someone help me please get the right driver for the remote control and the DVD playback software.

  Thank you

  Maybe it's Quick Play

  FTP://ftp.HP.com/pub/SoftPaq/sp43001-43500/sp43325.exe

• Need help to choose the Dell server for new cluster... What are you using there?

  The best host that I have is a 2950 with 16 GB and I need to buy three more ESX host to be part of the cluster of 2950.

  Wwhat should I choose which would be the last and the largest and still be compatible with the 2950 for vmotion?

  Thank you!

  R710 is a good choice and with EVC could be VMotion compatible with 2950 old without major problems.

  If you need more CPU power to also consider R810 system.

  If you need a lot of RAM check R910.

  But (IMHO) the R710 is a good choice of Dell portfolio.

  André