Need help to choose a hard drive of my iMac desktop backup

Similar Questions

• Need help in choosing external hard drive encryption tool (Windows Bitlocker)

  Hello friends,

  I have an external hard drive (model capacity - STBU1000303, - 1 TB Seagate) and I'm looking for a disk security tool so I can encrypt my external drive and protect the password.

  I found a tool Microsoft Bitlocker, so please suggest can make the backup encryption and password for this external hard drive? Or should I try another third party tool?

  Thanks in advance!

  Hello friends,

  I have an external hard drive (model capacity - STBU1000303, - 1 TB Seagate) and I'm looking for a disk security tool so I can encrypt my external drive and protect the password.

  I found a tool Microsoft Bitlocker, so please suggest can make the backup encryption and password for this external hard drive? Or should I try another third party tool?

  Thanks in advance!

  See the following link.

  Getting started with BitLocker Drive Encryption:

  http://TechNet.Microsoft.com/en-us/library/dd875544 (v = WS.10) .aspx

  "You can use BitLocker to encrypt fixed data (such as internal hard drives) drives and removable data (such as USB and external hard drives, flash drives) drives. To encrypt a data drive, it must be formatted by using the FAT, FAT16, FAT32, or NTFS file system and must be at least 64 MB in size. »

  Use the menu on the left side of this page to view other items all the information on the use of Bitlocker.

  Concerning

• DV7-7333 CL. : need help formatting has replaced hard drive in my laptop

  Greetings,

  I received instructions from HP another volunteer on a bad hard drive replacement. I replaced the hard drive with a new and need someoe to please guide me how to format my new drive hard back to the WIN 10 I had installed on the former. I also buy a 22 pin adapter usb to SATA.

  Another agent said that Windows 10 can be reinstalled on a new drive hard if your installation has been activated before. The activation servers Microsoft just know your computer and will be reactive. You must Access the media creation tool and have it make a bootable DVD player or you need a usb thumb drive at least 4 GB.

  I am in Germany but still do not know the language well enough and could not find a tool for creating Windows Media version in English free repacement.

  I don't know what to do to format my new hard drive... Please help!

  Thank you.

  Wes

  PROBLEM SOLVED (FINALLY)! I just wanted you to know that we have finally understood why the data on the computer with the media to WIN creation tool not was not download on thumb drive = Firewall! Not sure if everyone will have this problem but in collaboration with Windows agent, I happened to see a pop-up window saying something on the analysis of data not allowing not to download. It is therefore sometimes necessary to temporarily disable all firewalls and Web titles before starting the download.

  Follow the instructions of man Las Vegas thread above to create a bootable USB Thumb Drive to replace newly hard drive with OS Windows 10. HOWEVER, the following was not mentioned in his instructions, and not all computers can do this extra step so keep the following in mind if your USB key does not complete the upload.

  Again, to download data, I downloaded on the work computer, a USB key, I had to we need to temporarily disable all the security features on the work computer until you have completed the download of the WIN Media Creation Tool on the thumb drive process (this includes your private web anti-virus, we can use AND/OR the WIN Firewall and other security features available on the led computer. )

  I hope this helps those who have similar problems.

  Thanks again for all your help man Las Vegas thread!

  Kind regards

  Wes

• I need help to retrieve my hard drive using the recovery of Neosmart disk (it takes days)

  To get a better perspective, I'll tell you the history of what has gone wrong.

  What happened is that the computer has a virus and it changed some coding on the computer. When this happened to that my computer wouldn't let me enter my account and the only account that I could go on was the administrator account. I tried on a few websites and the other microsoft Web sites told me to do something with the command userinit or something like that, which led to the black screen of death that I managed to fix it on my own.

  Another website told me to use the recovery disk but like a lot of people that I don't have a recovery disk, I only had a reinstallation disk that said I could fix the computer, but it would delete all hard disk that I didn't, I need the intact files because they are important to my family.

  Then I discovered on the recovery disk that you can buy from Neosmart.com and this disc is made like the original Vista recovery disk. Anyway I bought it and I clicked on "Automatic repair" and it comes up with 2 dives eligible for recovery (it says at the top) a player is 10 GB and the other is 288 GB (it says active is the 288 GB we) I clicked on repair automated on one of them, but I don't remember. Apparently fixed it (coding I guess) and I restarted but no consideration was there. He says "Please wait" for a long time, then it comes up with a single account that says "User" I click it and it says user name and password you will need to connect to a computer at school or something. I put my username and password anyway and it does not of course and it comes up with "the specified domain does not exist or could not be contacted.

  So, I went back on the recovery disk and I so I click on system restore to get my stuff back and I can put it on a previous date until the virus has arrived and I click on it, then it is said that his recovery, files, but just like that, I let him recover and he was recovering for 3 days before I came on this site and tried something but it did not work. Like I said before it is 288 GB so I guessed it would take a long time to recover only the amount of data, but it seems just silly.

  Could someone please help me with this with words that I can identify the disk recovery Neosmart.com please

  Important additional information

  I said before that I don't remember what I have fixed drive, the thing is that there might be I have set the wrong drive, but to be honest at this point, I feel like if I do a movement without knowing what it will do, im going to lose what's on that hard drive

  Important files are not for work, they are files containing family photos of many years we couldn't print on paper of good quality printing. There is no other copy of these pictures and I really want to keep them, even with my parents.

  The recovery of Neosmart disk contains the following options

  • Auto repair
  • Score editor
  • Browse/Backup of files
  • Internet browser
  • Launch the command line

  Within the Automated repair is where you can get the system restore. The others you can kind of guess, if you want to know so just ask.

  Help, please

  Thank you

  To recover the photos, you can remove the drive and it slave on another computer (you can get very cheap external envelopes) and remove your data (you have just learned an important lesson in why you need to have backups).

  Once you have saved your data, your best bet would probably be to reinstall. A good Web site for the removal of malicious software is that one.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Good luck!

• Need help to share a hard drive in vista

  How do you share a hard drive in Vista on a home network that the other network users can back up their music, photos, etc... I have 3 computers vista and and 4 Xp Pro on the network computers and all that I get a message saying "F:\ is not accessible. Access is denied. " CANY anyone help

  Hello

  The hard drive is missing on the permissions that are required.

  What are the permissions?

  Permissions are rules associated with objects on a computer or network, such as files and folders. Permissions determine whether you can access an object and what you can do with him. For example, you can access a document in a shared folder on a network but only be able to read the document and not to make changes. System administrators and users with accounts of administrator on computers can assign permissions to individual users or groups.

  To take possession of a hard drive.

  1. make a right click the hardrive / partition you want to take control and then click Properties.

  2. click on the Security tab, click Advanced, and then click the owner tab.

  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click on the name of the person you want to give to the property.

  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  6. click on OK.

  For more information, see the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Do us it if it can help

  Concerning
  Anthony.

• Need help with a new hard drive in pavillion wiring elite M9400

  Hello fellow owners HP,.

  I recently bought a 1 TB hard drive for my Pavilion Elite M9400T.  I done my share of reading about installing to a new hard drive to another former post office and know how to physically install the disk in the slot, but my question starts with the wiring.

  I have a M9400T and saw the video of the installation here in this post.  I read to the bottom when he talks about the installation of additional hard disks into the empty Bay and had questions about the son in photo 5 on the photo below. I realized that I needed a Sata cable, so I bought one today, but I wonder if I can use other cables inside the case already for power. And who will be all I have to do to get this properly installed disc? I took pictures so that it would be easier for me to ask for help.

  

  

  A and B belong to my main hard drive and I want to know if I can use D (unused but looks like B) and a Sata cable bought my 2nd hard drive. I also noticed that B is related to C, which leads to the motherboard, so I didn't know if I needed to do the same for the 2nd drive.

  

  Connectors SATA 1 and 6 are taken by my hard drive and DVD drive (I think) cannot so I just put my 2nd hard drive on one of the remaining of the caps of 2-5?

  Thanks in advance for any and all tips and suggestions.

  BTW, I I was able to install the sticks of memory 2x2gb today without any problems for a total of 6 GB today but no matter what slots? I added the 2 slots of the fan and it seems to work very well.

  SO, Yes, you can use power connector would be ' for your new hard drive.  If you look closely at the image of a ' and follow the Red wire, it runs directly on the white molex (P4) beside the PSU connector.  He doesn't have to go to the motherboard.  Is not feed all the other components.

  Message edited by old_geekster on 11/13/2009 10:50

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Need help | Time Machine: An external drive to an another external backup

  I have two external drives connected to my Mini.

  1. Elementary school: a 4 to format ExFat (because it must be compatible; he must remain this Windows format).  Currently, it is half full.
  2. The second: Time Machine.  It is currently formatted as OS X Extended (journaled).  I can change the format of it if necessary, although the documentation I've read online indicates that this is the required format.  He is currently empty, eagerly waiting to be filled.

  I recently had to upgrade both of these drives.  For the past three years or so this configuration worked.  Since migrating my data to the new material and permutation of readers, however, my main drive is now listed under Time Machine-> Options-> excluded items.  It is grayed out so I can't remove it from the list and can therefore be saved.

  Can anyone offer advice?  On the phone that I was told all upward could never work, but, again, I do this for several years (even on this version of El Capitan).  It was a headache Time Machine restore (perhaps because of the formatting), but at least my data has been backed up with precision.

  I was surprised (and dismayed) when, on the phone, I was told by the representative of Apple to get just Carbonite because what I do is impossible.

  You can read and write on the main drive of the Mac computer?

  Which lists Get Info for the primary drive?

  In particular, what is listed under permission & sharing. Post a screenshot of the window would be useful to read the information with wider sharing & permissions

• Need help on choosing 11.1.2.3.500 or 11.1.2.4 for Hyperion financial planning project

  Need help on choosing 11.1.2.3.500 or 11.1.2.4 for Hyperion planning project implementation.

  Currently, we are debating on the following points, so need for expert advice, if someone have already done this.

  • As all our previous implementation are on 11.1.2.3 500 and we know with certainty, it is stable
  • 11.1.2.4 is fairly new in the market

  That said y at - he already put 11.1.2.4 implemented for the PPP in particular, if yes how is the stability. As we have hard time have no place for the bugs that deals.

  Thanks in advance,

  Deker P.

  I don't think that 11.1.2.3.500 for planning is massively different the 11.1.2.4 so for stability, they should be similar, the improvements are mainly around the simplified interface.

  I would recommend going with 11.1.2.4, he is already on his third patch for the planning so I hope that all important questions will have been met, if there is a concern, then perhaps you should look at POC.

  See you soon

  John

• I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

  This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

• Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Hello

  Please see error "Licensing has stopped working". Mac OS

  Kind regards

  Sheena

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• If I saved photo on an external hard drive, now remove the laptop backup files to free up space?

  If I saved photo on an external hard drive, I can now delete backup files from the laptop for free space - my 'E' drive is full and cannot run backups more.  Also other documents that have now been removed still have backups that I need?  How will I know what backup should I keep not individually through hundreds of files?  Thank you in advance.

  Original title: can anyone help please?

  Hello

  You can take a safe backup.

  After you create your first backup, Windows backup will add new information or changed to your subsequent backups. If you save your backups on a hard drive or network, Windows backup will create a new backup, full for you automatically if necessary. If you save your backups on CDs or DVDs and could not find an existing backup disk, or if you want to create a new backup of all the files on your computer, you can create a full backup. Here's how to create a full backup:

  1. Open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.

  2. In the left pane, click on create new, full backup.

• I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Oh, I of course put the whole issue in the reference line.

  I'll repeat it here.

  I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Thanks, Thomas

  Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

• The hard drive of my imac has disappeared, I have this G5 1.6, but can't do much with it, is anyway I can get a copy of OS x 10.5 from Apple?

  The hard drive of my imac has disappeared, I have this G5 1.6, but can't do much with it, is anyway I can get a copy of OS x 10.5 from Apple?

  Phone from the Apple Store online and ask.

  (141583)