Need help to learn the ESX implementation from scratch

Similar Questions

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Need help to identify the missing screws from the bottom of my 482PG-V7

  Hello, some of my screws fell off my 482PG-V7 and I was trying to identify who they are so that I could buy them online in laptopscrews.com. I tried to search through the online manual for V7-482PG, but I couldn't find the information.

  I have attached a screenshot here - if someone could help me please identify this it would be great, thank you!

  [under the direction of life private - deletion image which displays the serial number].

  M2.5x6mm should be the ones you need.

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• Need help now for the live installation

  Need help now for the live installation

  Hello

  As described in the question, I understand that you need help. I will definitely help you however, I would be grateful if you could help me with more information to better understand the problem and resolving it.

  1. What is the problem you are experiencing during installation?

  2. That you install? Any software or operating system?

  3. How you try to install the software/Os/application?

  If you need live support from Microsoft then you can click on the link given below and check if it helps.

  https://support.Microsoft.com/en-us/contactus/

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

  I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

  Start with the tutorials in the Welcome window to start and takes a course from a site like Lynda.com.

• Need help to check the switch VMNIC and VNIC DVS mapping...

  Need help to check the switch VMNIC and VNIC DVS mapping...

  I checked the command net-dvs, but it was not useful.

  Thank you

  Ravinder Singh...

  You do not have access on the interfaces between itself or this info is not visible in vCenter? Probably, you should talk to one who is in charge of your nexus dvSwitch.

  I don't know how it works on the nexus 1000v switch, but the output of the net-dvs provides information on balancing policy for all ports (note that he understands the uplink ports that may still occur as "port id of virtual source"):

  # net-dvs. "grep EI ' (Balancing | port)"

  port 320:

  source port = load balancing virtual id

  port 321:

  source port = load balancing virtual id

  port 177:

  source port = load balancing virtual id

  You should also be able to enter this info from esxcli, but I don't know if there is a hook to esxcli for the link. Perhaps, you can branch off with cisco of dvs esxcli vswitch network or something. On the dVS of vmware, you could do:

  # esxcli dvs lacp vmware vswitch network status

  LACP is disabled on DVSwitch.

  
  

  # esxcli dvs lacp get config vmware vswitch network

  DVS name LAG ID cards active network Mode

  ------------  ------  -------------  -------  ----

  Vmnic1 Some_DVSwitch 0, vmnic3 false

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• someone please help me restore the photos deleted from my camera sony cybershot

  someone please help me restore the photos deleted from my camera sony cybershot downloading on computer. Are there any hidden folder in drive g as basket in pc from where deleted photos can be restored

  N ° when the photos are removed from the Flash of the camera, they are gone.

  If you have not done something since then with the camera, you can download the software on your computer that may be able to recover deleted photos, or you can send the somewhere flash memory card that can do it for you.

• Need help to remove the zeros on the right

  Hello.

  I need help to replace the zeros in the string.

  I have a string which is the output of the network packet. There are a few trailing zeros in the package.

  I don't see them in normal mode, but the size of the string tells me that it's bigger then it looks like.

  When I pass in hexadecimal mode, you can see zeros.

  I tried to use the find/replace function allows you to search for 0 and replace it with an empty string constant. But, for some reason any, that he took no zeros.

  I need to stop the string that follows * 69.

  

  Show your code.  You won't find and replace with all zeroes.  These 00 in hex mode they are null characters.  (not printable byte with a value of zero).  You need search and replace on that character.  (replace string should look like 00, when it is set to display the hexadecimal code.

  

• cq57: need help cq57 enter the password administrator or power on password... deisabled system 58555314

  need help cq57 enter the password administrator or power on password... deisabled system 58555314

  Thank you!!!

  @clatimer

  Enter 47433930

  REO

• Need help in using the ActiveX to retrieve a VARIANT

  Need help in using the ActiveX to retrieve a VARIANT.

  Variant is shown as var {VT_Ul1, 1} in debugging

  By using the following

  HR = CA_VariantGetShort (& var, &value);)

  I get 0 for my answer instead of 1.

  Answered my own question.

  VT_Ul1 is an unsigned char and not a short.

• Need help to install the network on laptop drivers

  I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?

  The network adapter driver specifically requests the Ethernet, wifi and it...

  Hello McKinley,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you need help to install the network drivers into the laptop.

  Certainly, I understand your concern and will try my best to help you.

  In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030

  Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Need help to uninstall the game Deadspace

  Original title: uninstall Deadspace

  need help to uninstall the game Deadspace

  What you're looking for?
  http://help.EA.com/en/article/manually-uninstalling-dead-space/
   
  Revo uninstaller can be faster.
   
  Revo Uninstaller
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.html