Similar Questions

• Need help! Some kind soul take these small 3 files and then save them in 8.2 or lower?

  Mindsensors was less useful - not sure why - I remember well the theory that software sells hardware.  In any CASE, I need to have three small files (which are used to run their infrared distance sensor) that was saved in LabView 8.5 to load and then (saved file, except for the previous version) under 8.2.

  Many blessings to follow!

  Thank you

  Gil

  Nevermind - my apologies to mindsensors - they say they write only in labView 7.1 - so why I can't load into 8.2 - and why the error message indicates that it is written in 8.5 - I do not understand.

• Reading lines and then comparing them

  Hello
  
  I want to read two lines of a file, and then compare them. At the present time, I have implemented:
  

  String line = null;
  String currentLine = null;
  String prevLine = null;
  
  BufferedReader bf = new BufferedReader(new FileReader(fileA));
  while ((line=bf.readLine()) != null)
          {    
              currentLine = line;
              prevLine = line;
          }

  I understand that this code returns the same line, but I was just hoping that maybe someone could point me in the right direction. Thanks in advance.

  prevLine = currentLine;
  currentLine = line;
  

  Be sure to check for null in the comparison.

  DB

• Need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.

  I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.

  I use win 7.

  Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

• I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7

  I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7

  Error code 1 is often associated with permission issues. Have you tried to install Illustrator in a new user account with admin rights? If you want to download CS6, here's how to get it through creative cloud: html http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications.

  Let us know how it goes.

  Concerning

  Stéphane

• With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way t

  With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way to do this?

  This is the command key, not the control key for a Mac that you use on the layer.

  Gene

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• I need help to unite 2 users on the same CC account, can someone help me?

  I need help to unite 2 users on the same CC account, can someone help me?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• Need help to remove an entry from the "orphan" ESXi4/vSphere inventory

  I would apprecate a help because I seem to have managed to myself in a bit of a tie knot.

  Having recently installed ESXi 4, we are moving some old servers VMWare 1.09 virtual machines to new ESXi box. I copied one of the virtual machines in the store and then added to the inventory database. When the machine refused to start then I tried to run the hardware upgrade process.

  When this is not so, I have to admit that I do not and I then spent to the data store and delete the folder that contains this virtual machine instead of using the option "remove disc" in the context menu of the inventory.

  So I find myself with an entry of the inventory that doesn't really exist anymore. I tried to copy the VM for exactly the same folder in the data store in the hope that this would then allow me to remove the inventory screen. However, when I right click on the object of the inventory, the options "remove disc" and "Remove from inventory" are both greyed out.

  Is there another way to delete this orphan entry?

  Thanks in advance.

  Phil.

  Hello

  In ESXi, your inventory is maintained in the file /etc/vmware/hostd/vmInventory.xml

  Edit the file and see if the virtual computer is listed.  If this is the case, remove it.  For example:

  <ConfigRoot>
  <configEntry id="0000">
  <objID>16</objID>
  <vmxCfgPath>/vmfs/volumes/4b630d21-8dc368cb-98ea-002219654c96/BADVM.vmx</vmxCfgPath>
  </configEntry>
  ....
  
  </ConfigRoot>
  

  The file backup, first of all, then delete < configEntry > to < / ConfigEntry >, save the file, and then restart the management agents. Once you sign in again with the VIC, we should have the virtual machine.

• Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Vanle

  Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Paris looks Jokum

  Bay3Bob - you are great! Thanxxx :-)

• How to use Plugin-Nik Software with Photoshop Creative Cloud?  I have installed the software I used with Photoshop CS6, but now that I installed CC, I don't know how to access.  Thanks for your help.

  How I used Nik Software Plugin Photoshop Creative Cloud?  I installed it on my iMac and use it with SP6, but now that I use the version of the CC of the PS, I don't know how to access the Nik.  I mainly use SilverEffex Pro for black and white conversion.  Thanks for the instructions.

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  Hello

  Please, go to the folder of the application on your Mac, find the folder of Photoshop CS 6, double-click to open it and copy the folder plugin from here.

  Open the Photoshop CC folder which will be again in the application and paste the folder plugin inside. Replace reboot of the CC of the Photoshop file and it should be there

  Thank you

• When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.

  When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.

  With the new files to open as a layer and not a background, I'm not able to create multiple layers and it won't let me convert the background layer.

  How what happened. I've used PS yesterday and had no problem. Today, my computer did updates mandatory day and now this.

  Yes. You use the option of Pixel of the Ellipse tool. He's so setting pixels as it is supposed to do without creating a layer.

  Choose the option to the form:

  

  Also the menu layer > new layer creates layers and paper rolled up at the bottom of your layers palette also creates a new layer. I hope these work.