Need help to set up a network between two Windows 7 computers
I have two Windows 7 computers at home: one is a desktop computer that is connected directly to the internet (with a network cable), and the other is a laptop computer that is not directly connected to the internet with a network cable. We have a configuration of wireless network for your laptop is set up of this network and has internet access.
What I want to do is set up a network between the two of them, so that the laptop can access the printer that is directly connected to the desktop computer. I got this configuration when both computers are Windows XP, but since we their past to Windows 7 I can not it works. I tried to create a home network, I set the printer on sharable and given him a name, but I can't access it on the laptop.
The printer is actually a photocopier, but it is directly connected to the desktop computer. In fact, it is connected to the router than the phone company provided. But we want the laptop to be able to access it and use it. As I said, we had this configuration when these computers are computers Windows XP, but I tried following the instructions to do this for Windows 7 and I can't make it work.
Also, I'm not that computer savy, so please if you tell me to run a program it please tell me how to find and launch this program.
Thanks for any help.
Hello
Welcome to the Microsoft Community Forum.
Before you start with the troubleshooting steps, I would need some information on the subject, so that we can better help you.
- What happens exactly when you try to access the shared printer on the network home?
- You receive an error message/code?
- Have you tried sharing the computer and using collective housing resources?
As you mentioned, you can share printer for two other computer running on Windows 7, you can check the items below that will provide you with information on how to work with the host group, and also another article that will you provide steps on how to share a printer on the network.
Homegroup from start to finish
Hope that the information provided is useful. Let us know in case you need additional assistance.
Thank you.
Tags: Windows
Similar Questions
-
Need help with the use of beam between two subVis
Hi all
I have two inside a big Vi subVis that need to be connected one to the other.
It's a complicated thing, I already have many sons in the wholesale Vi, which will become a mess if I connect these two subVis line-by-line (there are nearly 16 lines between them).
I tried bundle but failed two times (basically I don't know how to connect the wires grouped source Subvi the slot - VI intended).
Could someone give me an idea? A simple example of VI would be useful.
Thank you
+ Kunsheng
You can get a lot of help on the Web site of NOR, too, as this document.
-
Need help on the list of months between two Dates
Hi all
I have a table which has startdate and enddate and need a select to list all the months between these two dates for each given ID.
I did some tests and could not figure out how to get the startdate and enddate table (instead of hard coding) tests in the select statement.
Could someone please help on this (Oracle 11 g 2),
Thanks in advance!
create table testing( id number, start_date date, end_date date); insert into testing values(100, to_date('05-FEB-2011', 'DD-MON-YYYY'), to_date('28-MAY-2011', 'DD-MON-YYYY')); insert into testing values(200, to_date('20-JUN-2011', 'DD-MON-YYYY'), to_date('28-DEC-2011', 'DD-MON-YYYY')); commit; select * from testing; ID START_DAT END_DATE ---------- --------- --------- 100 05-FEB-11 28-MAY-11 200 20-JUN-11 28-DEC-11 Elapsed: 00:00:00.01 *for testing.id = 100:* select to_char(add_months(to_date('05-FEB-2011', 'DD-MON-YYYY'), l - 1), 'YYYY-Mon') Dates from (select level l from dual connect by level <= months_between(trunc(to_date('28-MAY-2011', 'DD-MON-YYYY'), 'MONTH'), trunc(to_date('05-FEB-2011', 'DD-MON-YYYY'), 'MONTH')) + 1); DATES ----------------- 2011-Feb 2011-Mar 2011-Apr 2011-May Elapsed: 00:00:00.01 *for testing.id = 200:* select to_char(add_months(to_date('20-JUN-2011', 'DD-MON-YYYY'), l - 1), 'YYYY-Mon') Dates from (select level l from dual connect by level <= months_between(trunc(to_date('28-DEC-2011', 'DD-MON-YYYY'), 'MONTH'), trunc(to_date('20-JUN-2011', 'DD-MON-YYYY'), 'MONTH')) + 1); DATES ----------------- 2011-Jun 2011-Jul 2011-Aug 2011-Sep 2011-Oct 2011-Nov 2011-Dec 7 rows selected.
SQL> select * from testing 2 / ID START_DAT END_DATE ---------- --------- --------- 100 05-FEB-11 28-MAY-11 200 20-JUN-11 28-DEC-11 SQL> select id, 2 to_char(add_months(start_date,column_value - 1),'YYYY-Mon') dates 3 from testing, 4 table( 5 cast( 6 multiset( 7 select level 8 from dual 9 connect by add_months(trunc(start_date,'MM'),level - 1) <= end_date 10 ) 11 as sys.OdciNumberList 12 ) 13 ) 14 order by id, 15 column_value 16 / ID DATES ---------- -------- 100 2011-Feb 100 2011-Mar 100 2011-Apr 100 2011-May 200 2011-Jun 200 2011-Jul 200 2011-Aug 200 2011-Sep 200 2011-Oct 200 2011-Nov 200 2011-Dec 11 rows selected. SQL>
SY.
-
Need help to set up an acquisition of two channels using NI5154
Hello experts NOR:
I'm setting up a scanner high speed data acquisition NI5154. I have two data channels need to be measured. In fact only the waveforms in the channel 1 must be recorded and channel 0 is used for counting digital pulses.
My goal is like this: once started, the digitizer should count the digital pulses in channel 0 for some time until a start trigger happened in the channel PFI_0. After receipt of the beginning in the channel PFI_0 relaxation the digitizer should switch to channel 1 and start captured signals and save them to the disc. After a well-defined time, stop digitier the acquisition in channel 1 and then switch to channel 0 and repeat as cycles.
my questions are: what the best way to count the Digital pulse channel 0 ? The only way I know is the source of reference on channel 0 command and then get the number of "Done Records" from the property node. After the acquisition of the digitizer will be waiting for the trigger to start in the channel PFI_0, no pulse in the channel 0 will be counted. If I let the impulses in channel 0 not counted in the first cycle, at the end of each cycle how can I switch from channel 1 channel 0 and saitch return after receiving the trigger from the beginning? It seems that I have to configure the trigger repeatly system.
-
Between two Windows 7 computers to sync Outlook 2010?
Specifically, my aim is to synchronize "Outlook 2010" calendar, Contacts (including 5 subdirectories), tasks, and notes between 2 computers on Windows?
I have a desktop computer and a laptop. Both Windows 7 and Outlook 2010. Both are on my home group. I currently use the Briefcase to synchronize specific Document files between the two computers.
(I'm currently syncing my Palm Treo 850 to my desktop, then to my lapstop via Mobile Device Center but the Outlook Contact (5) subfolders used to synchronize without new version Pocket PC 2010 - not yet published.) Only the main folder synchronization / by default. Therefore, I must find a new solution until the Pocket PC 2010 is available for a full synchronization. Unfortunately, new mode sync from computer to computer could exclude them have Outlook Contact subfolders on my phone well.)
Help?
Gwen
The key element to keep Outlook in sync on both machines is the. PST file. It contains everything. If you want your home Outlook even as your work in Outlook, make a copy of the. PST file to work (make sure that Outlook is closed when you do this), take the said copy home with you, set a folder where it will not overwrite your existing. PST file, then open it with Outlook using ' file | Open | Outlook data file "." You now have two options:
1. drag and drop what you want to work. PST at home. PST to their doing the same thing or,
2. this new set. PST default file and just continue to use it.There are a number of third-party tools that will do the synchronization, as see you in the link that I sent, but most cost money.
On the cell phone, you have reached the limit there is no way to sync subfolders of Contacts; It is a limitation of Windows Mobile and has no good workaround solution.
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks -www.badnewsbluesband.com -
I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help
Hi bardhiboris,
You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx
Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx
To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
need help to set up Linksys printserver with verizon wifi hotspot
need help to set up Linksys printserver with verizon wifi hotspot
pfsjmhall,
Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.
Then configure the Linksys print server. Find your network to give your passkey (password)
Then set up the printer, choose network and follow the instructions.
Rick
-
Need help with setting up in checkbox in interactive reports
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
< input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox
Do I need to configure anything else
Aditya Gupta wrote:
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
instead of the checkbox
Do I need to configure anything else
This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).
Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.
-
Build a private network between two physical hosts in ESXi 4.0 for VM guests
Hi all
I am a newbie in the use of VMWare ESXi for my company testings and I have a question on networks
in ESXi. In fact, I always do my tests in my VMware Workstation, and it's pretty easy to build a virtual
private network between two guests of computer virtual and it needed to do more real testings on ESXi environment.
But now I have two Dell servers mounted and with two ESXi 4.1 installed on these servers.
Each server has two network cards connected to the same network switch.
In this essay, I have to install a RAC Oracle 11 g as guests of virtual computer on two separate server Dell for
two RAC nodes.
The installation Guide for the PAP, I need to build a network between two nodes.
My superficial knowledge network, the private network address is not the same as
the public network address, in this case, the IP address provided by the network switch is
10.1.10.X and it should be public network address.
In this case, how can I do the private network of ESXi settings?
I do the settings of the network switch? I'm not the guy of networking and really
want your expertise in this area.
If you have an idea or experience to share, please kindly help.
Thank you very much
Ray
SonyRaymond wrote:
Then private network can be established between NIC (N1) and NIC (N2) with address 192.168.1.X
range?
Yes, that's correct. It would have made you have a private network layer 3 between the two guests in the 192.168.1.x address range.
In general, you also want to isolate a layer 2 (ethernet) with the VLANS on the physical switch, but if this is not possible at this time then it could be implemented now and you could later add VLAN in the switch.
It is also the reason why I think you should create a new portgroup on the same vSwitch as other existing exchanges. If you later configure VLAN to the physical switch, it will be very easy to activate this on the "private" portgroup
-
Need help to install Microsoft Photo Story 3 in Windows 8
I need help to install Microsoft Photo Story 3 in Windows 8
Moved from feedback
Original title: program programs Application Applications compatibility
It did not work any other suggestions?
-
Question: I need help to install CS4 on a pc running Windows 10.
Question: I need help to install CS4 on a pc running Windows 10.
Hello
Please Download CS4 products
Kind regards
Sheena
-
I need help on how to remove Adobe CS3 on windows 7
I need help on how to remove Adobe CS3 on windows 7. Have to use Adobe Creative Tool, but it does not work. He invites a message that 'the Installer database is corrupt". I need your help. Thank you
Error «...» The Installer database is corrupt... "When you install Adobe Creative Suite 3 products
-
need help to activate Adobe Acrobat XI PRO for WINDOWS?
need help to activate Adobe Acrobat XI PRO for WINDOWS?
Hi jurleana15722686,
Work with a subscription or perpetual version (where you bought the software outright)? Are you faced with a particular problem or receive an error message when you try to activate?
To start, please consult this document: https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.
If you're still having problems, please let us know what is exactly the problem, including the error messages that you receive. It would also be useful to know what version of Windows you are using.
Best,
Sara
[moved to download, installation, commissioning of disucssion forum]
-
How can I network two Windows Vista computers to share files and printers?
I have a PC connected directly (by wire) to a wireless router (which is connected to the modem/internet fine andworking) I also a PC connected to the wireless router, both computers connect to the internet just fine, how I'm going about setting up a home network to share files and printers. What kind should I I put in place and how.
Hello
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I need help setting up a network between Windows Vista and Windows 7.
original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER
HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER
Hello
You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows
Maybe you are looking for
-
Why my DJ 600 only printing a cartridge
I changed to new ink cartridges into the two slots and still only get the left cartridge ink. switched ink cartridges and get the same result. y at - it something in or on the trolley that can be plugged? have contracted the cartridges and cleaned th
-
Re: Satellite L650D - 15K - Windows Media Player does not work
Hello I bought a new laptop just before Christmas - windows media player does not and I don't know how to solve this problem. Any help would be appreciated? Gasuro
-
level of tension for the serial port sbRIO
What are the levels of RS - 232 votage on sbRIO serial ports? Signal levels might be: 3.3 V, ± 5 V, ± 10 V, ±12 V and ± 15 V? ±12 v what I often see for a direct connection to the serial port of a PC.
-
What is the size of the icons asking the device to storm
Hi all What is the size of the icons asking the device to storm?
-
ISE comments 1.3 portals
Hi all Anyone know of a bug in ISE 1.3.0.876 that prevents you from setting fields on the portal as mandatory self? It seems also impossible to get rid of the field "reason for visit. Concerning Roger