Need help to set up Time Capsule to extend the current U - pay Wi - Fi.

Similar Questions

• need help to set up Time Capsule with hub of sky

  Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

  El Capo can be really rotten networking.

  The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

  The TC may work very well in this configuration.

  Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

  So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

  Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

  

  The configuration... make the TC must go to bridge mode...

  It is Off (bridge mode) on the network tab.

  And you need to create a wireless network with a different name to the skyhub.

  You can probably do it manually now without too many problems.

  And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

  Click on the TC icon in airport utility.

  

  Click on change... at the bottom right on the summary.

  Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

  

  Click on wireless and fix that up.

  

  You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

  NOT RECOMMENDED APPLE NAMES that are FALSE.

  If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

• need help to set up time capsule as a backup only

  I used Time Capsule as a router wifi and backup for several years.  The wifi didn't give me the whole House coverage so I bought the mesh network eero newly released product. I still want to use my Time Capsule for backup and, as he already has about two years of backup on this subject, I don't want to lose these backups. I created a new network for eero routers but gave the network of the same name and password as the old TC network so that all my devices would automatically connect to the new network.  That has worked well.  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

  I also have a desktop Mac that has saved on the TC and it's my main computer.

  Thanks a lot for your help.

  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?

  No, you cannot join the TC now network a wireless router not apple. Apple has removed this feature because he was too... too slow, unreliable and missing too many apples.

  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

  You can run the TC between eero router and the sonos.

  Connect the wan port on TC eero and Sonos to the TC lan port. Configure the TC in Bridge mode. Disable the wireless sound. (Or you can leave the wireless on but use a different name for your eero wireless now).

  The TC will work like a switch... this side of it will work fine.

  How well the works of TC depends on the OS everything works... You can find it is actually necessary to paginate on the TC to make backups of the laptops wireless. Apple has made changes to the DNS system that broke network so that it can be impossible for computers discover the TC after a few hours after a reboot.

  Give it a try... If this does not work then you need to be more creative.

  The TC can connect through ethernet in the desktop computer. But for this, it must be configured with a different range of IP addresses for the rest of the network. Again, you can use wireless on... but the laptop will have to make backups by a different method. It gets complicated very quickly.

  Tell me what IP range using the eero router?

  I can make a few suggestions more as soon as we clear.

• Need help to set up Time Capsule with surfboard SBG6580... wifi or extender?

  I just got my Time Capsule and trying to figure out if I should use as my wifi router, or keep my SBG6580 active and e TC allows to extend my warranty.

  Any recommendations?

  In addition, how? Online instructions do not seem to be very clear.

  Thank you!

  I will always recommend to use your Time Capsule as a router, it will be much easier to access and manipulate, unless really, you need to report more coverage.

• Need help to record execution time of SQL in the database

  Hello
  I have an interesting thing that I am tiring to do. I want to record how much time (wall clock) it took the database to execute a select statement against a particular view lets call it CUST_ORDERS_V.
  
  I want to check which ran, what the select statement (SQL text) and how long it took and perhaps a few other auxiliary things if possible.
  
  Research in most of my needs me to right audit Oracle and the SYS. AUD $ table. After you set up auditing with:
  

  audit_trail=db,extended
  
  and
  
  audit select on ME.CUST_ORDERS_V by access;

  I get every piece of information that I need, except for the time of execution. Wow that would be awesome if Oracle who recorded! So I thought that if I could. I was considering a trigger on SYS. AUD$ (I know bad thoughts) which would look at some reviews of $ V and get the runtime and write this in other tables custom with a link back to SYS. AUD$.
  
  Maybe this is the complete wrong way to do it. I was wondering if anyone had any ideas on that.
  
  I'm running on 11.2.0.3 EA. I'm on EA if I use Fine grain audit if necessary. However I DO NOT have the Tuning or Pack diagnosis.

  Sky13 wrote:
  It's a call center and people on phones have learned that they can blame the database for their lack of productivity. Knowing the TSMITH selected in the 210 view times in his shift and the DB responded within the "Acceptable" range 99.5% of the time would be invaluable.

  If you're running at three levels (and this seems very likely) then your intermediate level probably has a record feature which can be enabled via a change of a line in a configuration file so that it will write a log record in a flat file for each call to the database with information such as : (source, time, start sql statement, return time). It is probably a better place to find a solution to your problem.

  Concerning
  Jonathan Lewis

• Airport time capsule as extender

  can I use my time capsule to extend the network wireless in my house? I have time warner cable modem wireless running right now.

  You do not indicate if the time Capsule will be connected to the Time Warner modem/router using a wired Ethernet connection or connect wirelessly only, therefore the best answer we could provide to your question is 'yes' and 'no'.

  Yes, if the Capsule will connect to TWC modem/router using a wired Ethernet cable connection, permanently.

  No, if you ask if the time Capsule can extend wireless signal from the modem/router to TWC.

• Setting up Time Capsule 3 to

  Advice please, I'm a little confused as to how set up my Airport Time Capsule to do what I want it to do.

  I currently have:

  -A "Superhub" recently installed offering fast home Internet access via a cable fibre optic supplier.

  -J' bought a Time Capsule from Apple before hand and want to put it up to do the following:

  -Connect two external hard disks accessible storage from my Mac Mini and MacBook (USB connection).

  -To connect a USB printer accessible to these two computers, (more than the iPad and an IPhone).

  (Meanings attached to the ATC via a USB hub)

  -Use 3 TB storage in ATC as a backup Time Machine of Mac Mini and MacBook.

  I understand that ATC must be connected on the beautiful via Ethernet to the WAN socket cable to a plug on the hub.

  I'd be grateful if someone could please explain/point me to an explanation that describes how to set up my Mac Mini ATC in order to achieve the above requirement clearly and in simple terms.

  Thank you very much

  Before you begin, you must understand that to connect a printer to the USB port on the Time Capsule, as the iPhone and iPad iOS devices will NOT be able to print to the printer?

  That being said, a third party application like Printopia pourrait be able afford this, but there are no guarantees, and our ability to help on such things is limited, at best.

  The reason is that iOS devices required an AirPrint -compatible printer that connects to a wireless network. In other words, Apple takes the 'Air' in AirPrint very seriously.  Please take a look at this support document Apple for more information on AirPrint compatible printers.

  On AirPrint - Apple Support

  Order of the day. Depending on the brand and model of your printer, your Mac may or may not be able to print on a printer connected to the USB port on the Time Capsule.  Unfortunately, Apple does not provide a list of compatible devices in this regard.

  So, while we provide some tips on 'how to' attempt to put in place, we cannot tell you if it will work or not. Not sure how well... or if it will work until you try it on your own network.

  We will try to help, but normally, you could get information on how to set up your printer by people of support for your printer, not to Apple.

  Regarding the connection of two hard disks and a printer to the USB port of Time Capsule, this will require the use of a powered USB hub which manages devices USB 4 or more.  The problem... some powered USB hubs will not accept a USB to operate simultaneously, so you wouldn't be able to print, for example, while you have been back up data on a hard drive connected to the powered hub.

  So, you will need to check with people of powered support for your hub to ensure he will allow the simultaneous for USB devices use.

  If you want to move forward, we can help get the set up time Capsule and work with your Superhub, but our ability to help printers and hard drives may be limited.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help to set up Linksys printserver with verizon wifi hotspot

  need help to set up Linksys printserver with verizon wifi hotspot

  pfsjmhall,

  Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.

  Then configure the Linksys print server. Find your network to give your passkey (password)

  Then set up the printer, choose network and follow the instructions.

  Rick

• Need help with setting up in checkbox in interactive reports

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

  Do I need to configure anything else

  Aditya Gupta wrote:

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  instead of the checkbox

  Do I need to configure anything else

  This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).

  
  

  Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

• With the help of Apple's Time Capsule with Lightroom

  Hi, I just bought Time Capsule thinking that all my photos may be wireless sync or searchable using Lightroom. However, when I tried to open the catalog in Lightroom on Time Capsule, it is said that he can not use network drive! WHAT A BUMMER!  I always hope that there should be another way so that I could use my Time Capsule in Lightroom and do my usual regular fabrics, manage my photos and editing wireless (if it's going to be slow, is very WELL!)

  Please advice if someone has an idea to solve this problem...

  Thank you!!

  You can have all your photos on the Time Capsule disk, but the catalog must be on another internal drive or external.

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• I need help to remove Adobe Acrobat. I got the free trial version, and it has expired. I thought I deleted the program, but I get this message "before you proceed you must first launch Adobe Acrobat and accept the end user license agreement."

  I need help to remove Adobe Acrobat. I got the free trial version, and it has expired. I thought I deleted the program, but I get this message "before you proceed you must first launch Adobe Acrobat and accept the end user license agreement." I thought I deleted the program, so I can't seem to be able to throw. I have a MacBook Pro OS x help, please.

  This message comes from Adobe Reader; Launch the Reader application and accept the EULA.