Need help to solve a mystery of % lecteur_systeme %

Similar Questions

• Warning for Vista: Diagnosis, event id #407 and Vista error: Diagnostics, event #402, need help to solve

  I need help to solve the following issues:

  Warning in the event log: Source diagnosis, event id #407, error #407, 402 # and #408.

  Thank you!

  Julie

  Hello

  1 have had any changes made on the computer before the show?

  2. what exactly is the problem that you are facing on the computer?

  3. What is the full and exact error message?

  4. do you have problems of performance on the computer?

  Method 1:

  Check the link and see if it helps:

  "Error, warning, or critical" events are recorded in the computer a Windows Vista-based Diagnostic Performance/Operational event log

  http://support.Microsoft.com/kb/942910

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc733455 (WS.10) .aspx

  Method 2:

  Check out the links and check if that helps:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help to solve the problem in valueset...

  Hi all
  
  I need help in the creation of the set value.
  My requirement:
  I need 2 1. date settings 2. how far
  When I chose the first parameter (to date) ex: 01-01-2010.
  If I chose the 2nd parameter in this one, I need to display equal or superior to that date (i.e., based on the first parameter). that is, grater than or equal 1 January 2010 "this date. Not displaying does not forward then this date.
  With the help of $flex$, we can do this am getting the error.
  You can help me pls to it.
  
  Thanks in advance.
  
  
  Kind regards
  Leelakrishna.G

  Hello

  If you use the value defined in the program settings simultaneously, the only thing to do is go to the simultaneous program settings screen, go to the parameter "Date from" and mark the field Range as low. Then go to the parameter "To Date" and mark the highest field. In this way, the system will not allow the user to enter a "Date to the ' who is older than the 'Date '. It will be useful.

  Kind regards.

• Need help to solve the problem with worm:win:32 / cridex.e

  Please help me to solve this problem worm:win:32 / cridex.e

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Dead sounds - need help to solve the problem

  Its just died suddenly.  Troubleshooters tell me disabled audio - can't find that

  Audio device manager - disabled and does not by default - which is not found

  Need services of generator of the window and the window Audio end - totally lost

  I did not hit anything either or to change anything whatsoever.  All tests show its OK and speakers OK - sound is not muted

  I think that everything the only thing that could be linked has been tested.  I think that MS convenience store gave me the advice above.  However, when I look for those

  elements, quite simply, I do not see them, and I don't know where else to go to get them.

  Can someone help me, please?

  Convenience store must give you the option to fix, have you taken steps to solve the problem in the troubleshooter?

  That you have installed new software before the problem happens?

  Try to run a full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Need help to solve problems on iPad Air2 after updating iOS 10

  Hey guys this is my second post in the forums of the iPad on the same issues - have not been able to sort them yet Dazs.

  (1) my iPad can't Touch ID even after the restoration of the aircraft there was "failure to put in place Touch ID error" and whenever I turn on the Tablet I get a notification that says: «cannot activate Touch ID on iPad»

  When I go to settings to set a new mark I simply get an NDR regardless of switching Touch ID access power (iTunes/App store + phone unlock) as support interviews suggest.

  2) there is a general delay in the camera, the on/standby button does not respond as it used to, and especially when I turn on the iPad must be 2min30secs to get switched on - I timed it actually! Before the update simply took 15 seconds, my old laptop powers on more quickly than my iPad now!

  I restored my iPad, and while all the other functions work with delay however, but these two big things are bugs me a lot. They are not resolved after the restore the device.

  How to solve these problems please help!

  Here is the error I get when I try to configure the contact ID.

  

  This is the error that I get whenever I turn on the unit.

  

  And iPad takes so long in power! Record the time more myself!

  

• Need help to solve the problem on my Satellite U500 PSU9ME

  Dear Toshiba

  I've always used laptops for years working time or personal laptops; I decided to change Toshiba because I hear a lot how they are and high quality!

  Since I bought my laptop and I'm having all sorts of problems with it!

  1. 1st day I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  2. I've updated of bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  3 today, I had a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  I'll take it tomorrow at the service, but the laptop was purchased on March 24, 2010 only! And it has been registered online on March 26, 2010;

  The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of this.

  I have didn't even use it again as heavy I used to other brands which has never had a single issue!

  This does not mean your laptops are bad, but IE please help and provide solutions or maybe this model needs an urgent review!

  Thank you!

  Model: SATELLITE U500

  > 1. 1st day, I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  Seems, that it was a software issue since I noticed a similar problem after receiving some updates from Microsoft is the updated graphics driver

  > 2. I have updated to bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  Wonder why you n t read the FAQ/HowTo section in this forum.
  Here you can find the BIOS update HowTo!
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  > 3. Today, I got a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  Seems the cooling starts module malfunction the ASP technician should help you

  > The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of it all.

  You're right, this is not normal cell behavior but it must be said that it s a machine and the machine could begin to malfunction it s nothing unusual and in your case, it was simply bad luck that happened after a short time of use

  I had a Toshiba laptop for 6 years and guest what? It s work great since the day of purchase trees

  Good day...

• I NEED HELP TO SOLVE MY PROBLEM OF SANDY BRIDGE CHIPSET!

  Hello

  I need someone to receive the update for my Pavilion Dv7 help 4290us part!.

  It is one of the machines involved in the problem of Sandy Bridge, I checked several times...

  I'm already registered the laptop

  Thanks in advance

  Manuel Ramirez

  The number of product of your laptop is XZ037UA #ABA (here ABA means this model has been sold in the United States only). Where was this laptop bought exactly and where are you located now?

  HP offers a comprehensive guarantee and ideally, this should be covered free of charge. You can find more info on link below

  http://support.HP.com/us-en/document/bpr01266

• I need help to solve a problem I'm having with an installatiion of set-up/repair Windows XP Home Edition service pack 3

  I have 2 computers running Windows Xp Home Edition Version 2002 Service Pack 3.  I tried to run a set-up/repair on one of them.  He loaded the files and went back to the stage of the installation.  He said at this point, it takes the file 'ASMS' of the S3CD.
  I copied the ASMS from the other computer files on my USB but the computer being the establishment does not recognize them.  The program disks that I bought with the computers at the same time say XP Home Editiion 2002 version, but nothing about service pack 3.

  What I need to know is if sp3 is the same for the home edition as it is for regular XP and is different ASMS files in the installation of the sp3 that they are in the House editiion.  If I buy the sp3 disc or download these files I will be able to complete the installation of the set-up/repair on my computer or is there perhaps something wrong with the device causing it to do what he did.

  I am also curios - running installation of set-up/repair on this subject, I lost all my files or will they preserved when I've completed the process?  If I lost my files I before moving on to Windows 7 or any other OS that supports available further in the future?

  Any help/information will be greatly appreciated.  Thank you.

  Hi RandyMeier,
   
  Service Pack 3 files will be different than the normal installation files.
   
  It would be useful to an original CD of Service Pack 3 for installation.
   
  There is an article that you can follow before that and check if it helps.
   
  "The file 'Asms' on the CD-ROM Windows XP Professional is needed" error message when you install Windows XP
   
  If you are using a clean installation process all files may be lost.
   
  In this scenario, you should consider the upgrade of the operating system Windows 7.
  http://microsoftstore.com/Win7
   

  Kind regards

  Divya R - Microsoft technical support.

• When I have my window starup (error loading dll) I need help to solve this problem

  HPDV6871US LAPTOP

  I uninstall a program from the control panel but some how when the starup high tower it allway come with dll (error loading)

  Help, please

  Uninstall the Kodak software system and if you need then this step to install it again.

• Help me solve the mystery of The Blue Screen of Death BSOD

  I have a user who knows to randomly BSOD errors.

  After reading another post I have collected the minidump, the msinfo file and config of Dell.   I hope this is the right place to ask these files for further assistance with this issue.  Can you read through these and help me understand what is causing this problem?

  Link to the above mentioned files.

  https://drive.Google.com/folderview?ID=0Bz7KXOfhWjvvY0ZSLUN5VmtwbmM&USP=sharing

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  2-Memtest. (You can learn more about running memtest here)

• AS3: need help to solve a problam function

  Hey, I need your help once again.

  I have a wheelchair clip that I want to just move left and right in a loop, I have this code:

  var wheelChairRightTimer:Timer = new Timer (120,24);
  var wheelChairLeftTimer:Timer = new Timer (120,24);

  wheelChairRightTimer.addEventListener (TimerEvent.TIMER, moveRight);
  wheelChairRightTimer.addEventListener (TimerEvent.TIMER_COMPLETE, startMoveLeft);
  wheelChairLeftTimer.addEventListener (TimerEvent.TIMER, moveLeft);
  wheelChairLeftTimer.addEventListener (TimerEvent.TIMER_COMPLETE, startMoveRight);
  
  wheelChairRightTimer.start ();

  function moveRight(event:TimerEvent):void {}
  wheelChair.x = wheelChair.x + 20;
  }

  function moveLeft(event:TimerEvent):void {}
  wheelChair.x = wheelChair.x - 20;
  }

  function startMoveLeft(event:TimerEvent):void {}
  wheelChairLeftTimer.start ();
  }

  function startMoveRight(event:TimerEvent):void {}
  wheelChairRightTimer.start ();
  }

  The problam is with the last function "startMoveRight". Without this feature the wheelchair goes right and left as he should and everything stops. I added the last function loop the movment, but after the first round of movment left and right (which works well), it seems that all 4 functions are called together so the wheelchair is battery mobile 20 px right and left 20 px.

  I know this probably isn't the best way, in other ways, or just a way to fix this will help a lot!

  This should do it:

  // speed
  var vx:Number = 20;
  
  var chairTimer:Timer = new Timer(120);
  chairTimer.addEventListener(TimerEvent.TIMER, moveChair);
  chairTimer.start();
  
  function moveChair(e:TimerEvent):void {
       wheelChair.x += vx;
       if (chairTimer.currentCount % 24 == 0) {
            // change direction
            vx *= -1;
       }
       e.updateAfterEvent();
  }
  

  Post edited by: Andrei1

• Need help to solve the problem!

  Hello

  I have Samsung SyncMaster P2250 Mointor, when any video works on my monitor, it is automatically going to turn off of the screen. then I never return to the screen but, always my Cpu is running. I left only one option that restart the computer.

  can someone help me what do I do? I also update the Nvidia software!

  Thank you

  Hello

  Have you tried another monitor? How can I connect the monitor to your machine? What is your machine and what operating system?

  Kind regards

• my pc brethren, although when its turned on it tends to act like the lcd screen is broken. I need help to solve this please.

  the screen goes black don't like not when it goes into mode 'sleep', but it tends to fizzle out and fade to black

  Hello

  Check with a real computer store (one that makes its own service internal and not of leeks)
  and displays a Best Buy or other stores) or system manufacturer support. Also
  Ask known problems in their forums.

  Support MSI
  http://www.msi.com/index.php?func=service

  MSI - Downloads (drivers and BIOS)
  http://www.msi.com/index.php?func=downloadindex

  MSI - Forums
  http://Forum-en.msi.com/

  MSI - Service
  http://us.msi.com/index.php?func=service

  MSI - Live Update online
  http://www.msi.com/index.php?func=downloadindex

  MSI - Contacts - USA - North America value
  http://www.msi.com/index.php?func=HTML&name=aboutus

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">