Need help to understand the network of vSphere environment
Hello
I need your help in understanding the network environment in vSphere. Please see the diagram and the text below:
NIC #1 - Management Port (access from client vsphere, vCenter server)
NIC #2 - Port of VMkernal (for iSCSI, vMotion, etc.)
NIC #3 -?
#4 – CARTE NETWORK INTERFACE?
Q1 how allow external users to access services over the ESX host? (for example, IIS, FTP, Exchange, NFS)
Q2, what will be the role of the other two network cards? Is it connected to the physical switch?
* Ask you all to please help me by sharing your knowledge / experience on the network portion, you have made in your environment as NIC how, what to do with that. *
I really need to understand the networking of concepts in vSphere, hope that your help!
Best regards: Yash
With an additional NIC with 2 port a general configuration might look like this:
vSwitch0 - vmnic0, vmnic1 (connected to different physical switches)
Network VMkernel management
VMotion VMkernel network (own IP network, own VLAN)
Better if they is configured as active / standby.
vSwitch1 - vmnic2, vmnic3 (connected to different physical switches)
Trade VM
vSwitch2 - vmnic4, vmnic5 (connected to different physical switches)
VMkernel iSCSI (own IP network, own VLAN)
Ideal if it is added to the component Multipath iSCSI, which is quite easy to vSphere 5.
Tags: VMware
Similar Questions
-
Need help to install the network on laptop drivers
I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?
The network adapter driver specifically requests the Ethernet, wifi and it...
Hello McKinley,
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
According to the description, I understand that you need help to install the network drivers into the laptop.
Certainly, I understand your concern and will try my best to help you.
In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.
http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030
Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
Need help to understand the query result
Hi gurus
I was reading one of the question here in this forum and its link is below:
I had some confusion related to this code and don't understand the logic of the out put, see query below:
Query
with sub_services as
(
Select su_seq 12323, 'HLR1' so_id, 1 seq Union double all the
Select su_seq 12323, "HLR2' so_id, seq 2 Union double all the
Select su_seq 12323, "A09" so_id, seq 3 of all the double union
Select su_seq 12333, "MO1" so_id, seq 4 Union double all the
Select su_seq 12333, "MO2' so_id, seq 5 Union double all the
Select su_seq 12333, "A09" so_id, 6 seq in union double all the
Select su_seq 12333, 'M0CR' so_id, seq 7 Union double all the
Select su_seq 12999, "LOL1' so_id, seq 8 Union double all the
Select su_seq 12999, "LOL2' so_id, seq 9 double
)
Select *.
of sub_services b
where exists (select 1 from sub_services
where su_seq = b.su_seq
and so_id = 'A09.
)
order by 2;
The query result
12323 A09 3
12333 6 A09
12323 HLR1 1
12323 HLR2 2
12333 M0CR 7
12333 4 MO1
12333 5 MO2
According to my understanding, the above query should return records in red only because of her is below command
It exists (select 1 from sub_services
where su_seq = b.su_seq
and so_id = 'A09.
but don't know why he's back 7 files, can someone help me understand the result...
It is query is functionally identical to the PL/SQL block, but much more effective.
declare
number of l_res;
Start
for line (select *)
sub_services) loop
Start
Select 1 from l_res
of sub_services
where su_seq = row.su_seq and
so_id = "A09" and
rownum = 1;
Essentially every row in the outer query are tested against him exists query. Given the correlation between two requests is based only on su_seq each line with a su_seq value returned by him is returned in the output.
Another way to think he uses instead a join condition. This query is equivalent to the query to exist
Select the main
of main sub_services
Join select (separate su_seq
of sub_services
where so_id = "A09") cond
We main.su_seq = cond.su_seq;
John
-
Need help to understand the security sandbox problem after changing Web host
I am trying to switch my Web host 1 & 1 shared hosting to an IP address with a small company that specializes in Drupal sites and doesn't know much about flash dedicated.
1 & 1 is always the Registrar for my domain, but I 'tidied up' YourGods.com on holistic servers and "stressed" my site DomainNameServers holistic rather than servers 1 & 1.
After doing this, my Flash site (which is based on the Gaia framework) has stopped working, and the Flashplayer debugger, gave me the following errors:
Error: Cannot load the xmlsocket://127.0.0.1:5800 policy file
Error: Request for resource at the xmlsocket://127.0.0.1:5800 by the http://www.yourgods.com/bin/main.swf applicant failed because the server is not reachable.
Security Sandbox Violation
Connection to 127.0.0.1:5800 broken - not allowed to http://www.yourgods.com/bin/main.swf
Someone to help me on another thread thought 127.0.0.1:5800 could mean that the problem had to do with my ways and I tried to access something on my local computer, rather than being a matter of cross-domain standard where one server was attempting to access files on another server without report.
If anyone can clarify this?
I googled 127.0.0.1:5800 and found some stuff on the loops between a server and the original computer, but I don't really know how to put it all together.
Is it possible (with the flash debugger or other software) to step through my code actionscript with periodic break points so I can understand which line is causing the problem?
Or a way to find out if there is a problem between holistic and my local or holistic computer and the 1 & 1 servers?
Thanks for any help.
127.0.0.1 is your local development server. It seems that your application is trying to access this IP address and unable to. You need to look at the source and find where it accesses to this and replace it with the IP address.
-
Need help to understand the collection
Hi all
I'm trying to understand the concept of collection, but when I look in the documentation that exists in google.ca, then, it seems very confusing. If someone suggest me or send me some simple examples and good collection and I really appreciate it. Thanks in advance.
Concerning
Line
Thanks for the explanation, could you please explain what does really to take care of the index as a whole and clause varchar2 and if yes then what condition we use varchar2 index and in which condition we use index as a whole, be we just use index by integer in our daily practice. Really appreciate your response. Thank you
Generally if you use collections, especially PL/SQL-only collections, your architecture is probably wrong. Collections are rarely necessary, but are often USED in the mistaken belief that they will help performance.
The use of the collections usually DEGRADES performance, sometimes severely, and they are often used in a way that is not scalable. You should avoid using collections if possible.
So don't use the collections AT ALL in your 'common practice '.
For the rare cases where there is to use an array associative index type to use depends on the data type of the element that you will use for the index. If you plan to use a string, then you use INDEX OF VARCHAR2. If you plan to use an integer, then you use INDEX BY PLS_INTEGER.
What type of index to use has NOTHING to do with performance.
One of the WORST mistakes developers make is to use an associative array as target of a BULK COLLECT INTO instead of using a TABLE IMBRIQUEE. Collection in bulk is more often used in a FORALL statement so that the elements are accessible only in the order. Useds "indexed" access with associative arrays isn't even necessary or used.
-
need help to understand the ACLs and security levels
I use static NAT (nat (inside, outside) static interface) between a single host inside for the DHCP address used on the external interface. The inside interface has the security level of 100, and the outside has the security level of 0. My understanding is that for connections with State, I wouldn't need the ACL. However, nothing works unless I set up an ACL (for example, right now I have a global allow rule). What Miss me?
Even if you 'dormant', but you still have the access list applied on the interface which, by default, will have the "deny ip any any" implicitly at the end of the access eventhough list you have existing line "inactive".
To remove access from the inside of the interface completely list, you must remove the following line:
inside_access_out access to the interface inside group
-
Buy the new iMac and need help to understand the new options
Replacement of the motherboard of my 2009 end iMac is unaffordable, so I'm looking to buy a new one. But the 'talk' has my head swimming. I know I want a 21.5 inches and that's it. My biggest complaint to my death machine now it was slow. However, I attributed as uVerse (Internet) and not my Mac; Maybe I was wrong?
My previous was 33. GHz Intel Core 2 Duo 8 GB, DDR3, a SATA 1 TB disk. I'm an independent publisher, it's full of documents, PDF files and tons of photos but apart from that... I did not use the design software (although I want to go in this area) and pretty much could have several tabs in Safari, Facebook, Word and Adobe open at the same time... nothing too taxing.
So what do I need? I read everything I can find and I can't yet answer that question!
Do I need a Fusion player (and what it is anyway)?
What is the difference between a Fusion of 1 TB drive and a 256 GB or 512 GB flash drive?
If I get in InDesign or Quark, Photoshop, will it take more RAM so I should just go with 16 now?
Is the standard 2.7 GHz quad-core i5 processor fast enough, or should I switch to 2.9 or even the quad of 3.1 GHz with i7 processor? (allowing it to run faster, more RAM or higher processor?)
Any advice or the definition terms would be MOST appreciated! Thank you!
In your situation, I would buy the 1 TB drive fusion, quad-core processor i5 2.7 GHz with 16 GB of RAM. The RAM is perhaps an exaggeration, but you cannot add it later these days so I think 16 GB is safe. You should get a noticeable performance gain compared to your current system.
IME, most of the complaints "My Mac is slow" result of naïve users be swindled by adding the third "crapware" such as antivirus programs, "cleaners", "optimizers" and "extensions". After a report of EtreCheck for your current computer see if it is the problem.
It is possible that adding an SSD in your current setup will give you the extra boost you are looking for, but if you use the machine to make a living, I'd be inclined to think that 7 years is old enough. Be sure to ask your accountant and covers the cost of your new machine against the tax.
Please take the opportunity to review your backup strategy. When it's your life on the line, you must have at least two external drives for backups. Keep one off-site and on-site, and rotate each week.
C.
-
need help to understand the compatibility with video cards
I recently bought a HP Pavilion a6742p Desktop PC I have no idea what graphics cards, it supports (trying to upgrade). Check the manufacturers page, but I couldn't understand anything either here is the link
http://h10025.www1.HP.com/ewfrf/wc/product?LC=en&DLC=en&CC=HK&lang=en&product=3875703
insaneaim wrote:
THX but which manufacturers video card companies take in charge of hp?
HERE, none of them. I recommend the following manufacturers, XFX, BFG, EVGA, Sapphire & PNY, in that order. These recommendations are based on personal knowledge, as well as several years of hanging around in the forums of enthusiasts.
-
Hello
Since last week, I've known several BSOD. Some have referred to a memory problem, but after you run a memory diagnostic seveal times, I still have to find the problem.
Since last week, here is the link to the minidump files.
https://onedrive.live.com/redir?RESID=2FA3EA1D7C87B0CD! 471 & authkey =! AA05X_X_DXaEOgc & ithint = % 2cdmp
Thanks in advance for any help you can give.
These accidents were related to the corruption of memory (probably caused by a driver).Please run these tests to check your memory and find which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
Since then, it is more likely to be a pilot run everything first.1-Driver Verifier (for full instructions, see our wiki here)
If the auditor does not have the issue we move to it.2-Memtest. (You can learn more about running memtest here)
If you cannot start after you have enabled the auditor reboot in safe modeIn Vista & victory (F8)
Co-written by JMH3143.
Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading file Dump [C:\Users\Ken\Desktop\New folder\080714-32011 - 01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
Deferred srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 7601.18409.amd64fre.win7sp1_gdr.140303 - 2144
Computer name:
Kernel base = 0xfffff800'03660000 PsLoadedModuleList = 0xfffff800'038 has 3890
The debugging session: Thu Aug 7 14:15:03.891 2014 (UTC - 04:00)
System Uptime: 0 days 4:02:55.202
Loading the kernel symbols
...............................................................
................................................................
........................
Loading user symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck 50, {fffff6e400084040, 0, fffff800036e7f42, 5}
Could not read the name of the problem driver
Probably caused by: memory_corruption (nt! MiUpdateWsle + 122)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
It must be protected by a probe. In general, the address is simple bad or it
pointing to freed memory.
Arguments:
Arg1: fffff6e400084040, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800036e7f42, if not zero, the address of the instruction that refers to bad memory
address.
Arg4: 0000000000000005, (reserved)Debugging information:
------------------Could not read the name of the problem driver
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000390d100
GetUlongFromAddress: cannot read fffff8000390d1c0
fffff6e400084040 non paged poolFAULTING_IP:
NT! MiUpdateWsle + 122
fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]MM_INTERNAL_CODE: 5
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0 X 50
Nom_processus: vsserv.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
TRAP_FRAME: fffff8800970b550-(.trap 0xfffff8800970b550)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 0000098000000000 rbx = 0000000000000000 rcx = 0000000000000a0f
RDX = 0000c 80010808009 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff800036e7f42 rsp = fffff8800970b6e0 rbp = 0000000000000c 70
R8 = fffff6e400084040 r9 = 0000000fffffffff r10 = fffff70001080488
R11 = 000000000000116e r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv in pe of na EI ng nz cy
NT! MiUpdateWsle + 0 x 122:
fffff800'036e7f42 498b 00 mov rax, qword ptr [r8] ds:fffff6e4'00084040 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff800037525b3 to fffff800036d5bc0
STACK_TEXT:
"fffff880 '0970b3e8 fffff800' 037525b 3: 00000000'00000050 fffff6e4 ' 00084040 00000000 00000000' fffff880 ' 0970b 550: nt! KeBugCheckEx
fffff880 '0970b3f0 fffff800' 036d3cee: 00000000 00000000' fffff6e4 ' 00084040 fffffa80' 04122600 fffffa80'00000028: nt! : FNODOBFM: 'chain' + 0 x 43801
fffff880 '0970b 550 fffff800' 036e7f42: fffffa80'00000028 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
fffff880 '0970b6e0 fffff800' 036f41bd: 00000000' 00000a0f 00000000' 23ba4548 fffff700 ' 01080000 fffff700' 01080000: nt! MiUpdateWsle + 0 x 122
fffff880 '0970b 750 fffff800' 036f39df: 20f00001 '63eb7025 00000001' 63eb7121 fffffa80' 04e10200 00000000' 00000000: nt! MiCompleteProtoPteFault + 0x2cd
fffff880 '0970b7e0 fffff800' 036f24f3: 00000000' 0016bd60 000007fe'fbef34ac fffff683 'ff7df798 fffffa80' 07f6cd08: nt! MiResolveProtoPteFault + 0x1cf
fffff880 '0970b 870 fffff800' 036e2179: 00000001 00000000' 000007fe 'fbef34ac fffffa80' 09a44af0 00000000' 00000000: nt! MiDispatchFault + 0x1c3
"fffff880 '0970b 980 fffff800' 036d3cee: 00000000 ' 00000008 000007fe ' fbef34ac fffff880'00000001 00000000' 0863fe50: nt! MmAccessFault + 0 x 359
fffff880 '0970bae0 000007fe' fbef34ac: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
00000000' 0863fb68 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fe'fbef34acSTACK_COMMAND: kb
FOLLOWUP_IP:
NT! MiUpdateWsle + 122
fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nt! MiUpdateWsle + 122
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
Nom_image: memory_corruption
FAILURE_BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122
BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x50_nt! miupdatewsle + 122
FAILURE_ID_HASH: {adc90a39-f60f-e57a-aeeb-d2a428d2eb03}
Follow-up: MachineOwner
--------- -
Need help to understand the manifest
Our server:
Service tagComputer modelPowerEdge T610At a 341-8785: PERC 6 / i SAS RAID controller, 2 x 4 connectors, internal, PCIe, 256 MB Cache listed on the manifest. We would like to know if - as embedded (we have not changed hardware from the front desk)-This RAID controller will help readers to all the berries without buying more hardware.
The rest of this topic:
Part numberQuantityDescriptionF609J1MODULE CARD (CIRCUIT), CONTROLLER, PERC6I-JAN NOSLEDJC8811THE ASSEMBLY, CABLE, 5 P, DRUMS, PERC-SASINU2091BATTERY PRIMARY SCHOOL, 7WHR, 1 C, LITHIUM ION, JURČEKPK1651COST OF SERVICE, DRIVER, INT PERC6I SAS RAIDT954J1ASSEMBLY, CARD (CIRCUIT), CONTROLLER, PERC6II, SERIAL ATTACHED SCSI, NOSLDT874M1MODULE, CABLE, SERIAL ATTACHED SCSI, SECONDARY, T6105FM3N1ASSEMBLY, CABLE, SERIAL ATTACHED SCSI, DIS1, T610W116M1MODULE, CABLE, SERIAL ATTACHED SCSI, PRIMARY, T610RM2551ASSEMBLY, CABLE, SERIAL ATTACHED SCSI, PRIMARY, T610Sam - CureSolutions.com
With the material you listed, the T610 and Perc6 / I'd be able to use the remaining locations. It's because you have the SAS0 and cables DIS1 (5FM3N and RM255) that run on both sides of the bottom of basket.
In a brief comment, Perc 6 / I can support much more server can contain, because it supports up to 32 drives per virtual disk and up to 64 virtual disks by Perc 6 / i.
Let me know if it helps.
-
Need help to understand the code
Hi allI was reading an article related to fill the list item, but I don't get some codes (see the code in red), I really appreciate if someone explain it to me.
Thanks in advance
link real =Oracle application development: how to dynamically populate a Pop list?
Code
DECLARE
group_id RecordGroup;
GroupName varchar2 (10): = 'abc ';
status NUMBER;
BEGIN
group_id: = find_group (group_name);
If not id_null (group_id) then
delete_group (group_id);
end if;
group_id: = Create_Group_From_Query (groupname, 'select DNAME, TO_CHAR (DEPTNO) Department');
/ * Select statement must have two column * /.
status: = Populate_Group (group_id);
Populate_List('DUMMY.) TXT_LIST', group_id);
END;
Concerning
Line
POPULATE_GROUP is a function (not a procedure) and must be called in this way.
State could be verified - see forms help:
"After a successful query, POPULATE_GROUP returns a 0 (zero)."
Kind regards
Zlatko
-
Need help to understand the DOM objects on host VSAN MDs
I read the info that I could find on the disk objects (including best practices guide & blog of Cormac), but fail to wrap my head around why I see what I see.
I have a motorized on VM (cvf1-wshark), who lives on a VSAN 3 nodes cluster. Each node has 1 SSD and 4 MD I uses all of the default policies (FTT, bandwidth, etc.).
That said, I wonder why it is clear from the exit of the vsan.disk_object_info of order RVC who live on 3 of my knots VSAN VM objects. vSphere client shows the correct RAID0 between 2 hosts (13.21 & 13.23) mirroring a witness (13.22), but the DOM objects on 13.22 aren't cookies (which I don't expect to see objects anyway). So, what do these objects on 13.22? I see the same distribution for each of my virtual machines on this cluster.
Thank you
Steve
################
13.21
################
/ localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7fb701ab6548453137d63
2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.21 (may take a moment)...
2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.23 (may take a moment)...
2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.22 (may take a moment)...
2014-04-15 14:44:08 + 0000: does get disc info VSAN
NAA.600605b006f7fb701ab6548453137d63 (52098356-69da-4ab9-b03f-11eea6025370) physical disk:
The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: directory of Namespace
Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)
RAID_1
Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: * naa.600605b006f7fb701ab6548453137d63* *, ssd: naa.600605b006f7fb701abde07e0de6c455)
Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)
The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk
Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)
RAID_1
Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: * naa.600605b006f7fb701ab6548453137d63* *, ssd: naa.600605b006f7fb701abde07e0de6c455)
Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)
################
13.22
################
/ localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7dae01ab65f7317f942d1
NAA.600605b006f7dae01ab65f7317f942d1 (5226984a-510a-dab6-86c0-1950f37a4ee2) physical disk:
The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: directory of Namespace
Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)
RAID_1
Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)
Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)
The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk
Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)
RAID_1
Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)
Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)
################
13.23
################
/ localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7f9701ab604452752b6b4
NAA.600605b006f7f9701ab604452752b6b4 (52cd5b55-c160-3fd8-2285-cfadc7b5d11e) physical disk:
The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: directory of Namespace
Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)
RAID_1
Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)
Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: * naa.600605b006f7f9701ab604452752b6b4* *, ssd: naa.600605b006f7f9701abe00d3102940d7)
The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk
Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)
RAID_1
Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)
Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: * naa.600605b006f7f9701ab604452752b6b4* *, ssd: naa.600605b006f7f9701abe00d3102940d7)
Yep - it is a quite normal output.
As Duncan suggests above, your poster only the same information each time your run of the command.
And each object is composed of 3 elements (2 x replicas of RAID-1 + the witness).
The other thing to watch is that this command is more information that you have requested, i.e. all components. However, components that are active for the disc that you put as an argument to the command are going to be wrapped in * double Asterix *.
For example:
The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).
Context: Part of VM cvf1-wshark: directory of Namespace
Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)
HTH
Cormac
-
Need help to understand the gradient tool
I create a linear gradient with 4 stops, and I like the effect it will create, although I'm not entirely sure how it works. There is a vertical line that I can control the gradient that goes from top to bottom on the form.
1. is setting where the vertical gradient line located on the shape another way to adjust the gradient points?
2. If so, when you want to adjust the vertical line vs playing with stops? Is it just a matter of preference?
Thank you.
Well, you would add certainly stops if you want another color, which does not otherwise appear in the gradient (blue to yellow to red, for example).
The colors between stops are interpolated linearly. If you want to stretch a section of the gradient over another, then you add a stop and drag it.
Above the slope, you can add the transparency stops, so you would add stop there, if you wanted to vary the transparency of the gradient.
Other than that, Yes... the eyeball. Look at some of the presets and see how they are built.
-
Need help to understand the oracle plsql design phase.
I am new user oracle plsql for learning. I wanted to know the following points.
(1) is there any process that we follow before developing procedures for oracle.
(2) is there any algorithm, flowchart, diagrams that we use for the Oracle procedure development.
(3) what I should learn in order to begin to develop procedures for the oracle.
organization charts
data flow diagrams
There any standard used in industry? comments or pointers would be usefuluser507531 wrote:
Meanwhile, I would also like to know if there are any designs / charts, high level design, low level of design, ER diagrams to create before you start any development of Oracle plsql.
It depends on the environment, work in and value standards. Some expect a case of use (UML) before a single line of code is written. At the time of Cobol, an organizational chart was generally expected.
With some new programming approaches, the test cases are often used to define the program (as in turn, which defines the objectives of the program).
ERDs come with database design - with the design of the PL/SQL program. You can use an ERD for a PL/SQL program, but is not part of the design of a PL/SQL program. It describes the database instead.
-
Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10
This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.
If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html
Maybe you are looking for
-
HP Pavilion g6: BIOS password recovery
I need a BIOS reset password. My code is 81670285 Thank you
-
M127fw MFP: How to delete the print jobs in the queue?
When I get an error message when trying to print, I keep trying to print. This means that I can hit 'print' five times for the same document, because I hit 'print' whenever I think I might finally have something fixed. The problem is that HP never f
-
Recycling bin is disabled, how can I get that back!
I use Rainmeter to a clean desk and off my recycling bin, then it would not be displayed on the desktop. I used to access via a shortcut, but I ran CCleaner and it has removed these shortcuts. Now, I have no way of getting to my recycling bin. I trie
-
Well, I want to change my email address because I lost my e-mail password and I can not able to recover. kindly tell me the procedure how to change my email. I want to change it... security of hotmail send a link on my email to confirm. but I can not
-
MacBook Pro at Lac Photo Photosmart Plus?
Hi all I have a 2011 Macbook Pro running OS x 10.6.8 which is the latest update of Snow Leopard. I have a Photosmart Plus B210 print via wifi. I did the software update on my Macbook, everything is up-to-date. I checked the preferences/updates on the