Need help to use a recovery disc for v3 - 551

Sorry for my English, still a student.

OK, so after having received these 5 discs, one being the system disk, recovery of 1, 2, 3 then language pack.

The problem is I deleted my partition on the HARD drive so that I have order the recovery disk because apperently I can restore my system with the factory settings. The instructions State to

1: Insert the disc labeled System.

2: reboot the computer and press f12

3:when you are prompted for the recovery disc, remove the system disk and insert the first disc of recovery. blah blah ect

So apperently I have the "system disk" boot up first then I can use the recovery disks. The problem is that I am unable to because in order to start this system disk, I need to set up in the UEFI bios 'comes like this to factory settings' that's fine. Boots/loads fine then once for the disc to load Finally I gives me two options.

1: new installation of system disk C:

2: restore all partitions of HARD drive (it's what I want), but once I chose option 2 I get the notice "Please start this recovery disk using BIOS legancy mode. I even then choose option 1, same message.

If I change the settings of the bios to legancy I can't load the disc then get this message 'WARNING fail' telling me I need UEFI mode.

So, uh, Yes, ideas?

system partition MBR table on EFI System... windows 8 TPG... Well hit me further in the head. Fixed, in reading your link. Thank you. Once I formatted the HARD drive by using windows disc 8, restoring the system started working. I had formatted HDD previously with windows 7 disc. I know...

Tags: Acer

Similar Questions

  • I want to use the recovery disc for re - install my pavilion dv6, but cannot boot from the recovery disc?

    Now my system Windows 7 Home premium canbe accessed, but with a lot of problems. That's why I want to reinstall it. I burned my own recovery (totally 4 disks) successfully disks. I insert the first disc of recovery CD-rom and restart my laptop, but it can not recognized but in win 7 automatically. could you tell me how to use my recovery disks to reinstall the system win 7 when that is not totally broken?

    Hello

    Probably go to BIOS and configuration of the machine to boot from the CD/DVD ROM. Please follow the instructions from HP:

    http://support.HP.com/us-en/document/c00364979

    Kind regards

  • Help! Maybe I need the recovery disc for pavilion d4790y... + I think I messed...

    I had problems with my office for awhile now, think it might be a fan, virus, hard drive or ram as in my previous post... the computer would freeze/crash or not stop, requiring a firm hard. trying to reboot/restart computer, it would beep several times until I have let it sit for a few minutes, then everything was back to normal (found that might have been an error in the BIOS after all this happened)...

    Now, I have NOT touched or replaced all the components on my computer at all. Nothing! Now I have a debate on the upgrade of OS and RAM, but did not decide whether it was worth on this older machine. So I have done no amendment or change in software. the only change I made to it was not renew norton and goes with vast (free).

    The other day, it suddenly wouldn't boot Win Vista 32 in all. My monitor at startup (before config utility appears) had colored vertical lines across the screen. I immediately thought 'virus' or ' fan isn't card graphic blown is screwed/false driver downloaded... I enter safe mode with network, no problem with the monitor (no lines) and tried driver restore, but also to download nividia the updated. Nothing seemed to work except safe mode (s), system configuration, start the Setup program, CTRL I (don't remember which menu is), & screen of the system restore/repair/diagnose. I tried all the reboot thing pilots config, patterns of change (hard disk only), boot it. When you go to the splash screen (a back screen on startup), no line either... I tried the system restore, did not a thing... I tried the verification of diagnosis, all right... all equipment, the repair of the system did nothing...

    So I take the side box power off to check the components inside to see if any wiring was loose, fans not working/salty, etc... everything OK there besides fan a little dirty. Clean, same thing. Here comes the fun part...

    Now, I backed up all my files and 'backup' on my external hard drive... I thought that I had made the recovery discs or he had came with it when I bought it... I changed the configuration settings RAID0 by removing the old installation and turned to the raid no drives. Then, I created a RAID0 again... I guess you know where this is going...

    He said now insert the boot cd... Now, it of not anything but let me in Control Panel and change the startup preferences...

    I have no recovery disk or I can't find what happened if I have... with backup (for USB) external drives will not work... I kind of looking online hp without result and I saw some online, but that seems pretty shady, especially with the case of the OS...

    I will not buy another office, if I can help it, but I need to know if there is something I can do?

    Thank you

    .

    Hello:

    Yes, I've been able to do it once, but you also need an operating system installation disk. You need a USB FDD + OS installation disc and the correct drivers of course on the floppy drive.

    You can use a recovery for this drive yet. It must be an OS installation disc.

    Yes have ultimate could be a problem. If you enter your model number on this site of surgeons in the computer, you get a lot of options showing the recovery disks for different versions of the OS, but only had listed actually drives.

    You need to call HP and ask or email these surgeons computer guys and see if they have the recovery disc for ultimate games.

    Paul

  • A recovery disc for Windows (for a Surface of 3 pro) 8.1 can be used on a different Surface Pro 3?

    Hello

    We tried to use a recovery disc of the 8.1 Win with an area of 3 pro on another surface pro 3 and we had this message when we click on 'Continue' (exit and continue to Windows 8.1)

    "Recovery... looks that Windows did not load properly...". »

    What it means that they are not compatible, and we cannot use this on this surface pro recovery disk?   Or it's something that we can ignore and just continue search for defects and forward repair options?

    Thank you and best regards,

    Chriseanmig

    Hello

    Thanks for posting your query in Microsoft Community.

    You can use a recovery disk Windows 8.1 on another device of Surface Pro 3.

    Recovery disk you have may be corrupted. You can create a new recovery media by following the steps mentioned in the article below.

    Create a recovery USB disk

    I hope this helps.

  • need recovery disc for hp dv6-1360us, model vm 219ua

    need recovery disc for a Pavilion dv6-1360us, model vm219ua

    Hello

    Please check to see if you can still order a replacement set of recovery disks from on the HP link below.

    Order HP recovery disks.

    Otherwise, they are always available from the 3rd dealer of the part on the following link.

    http://www.computersurgeons.com/p-17183-recovery-kit-589348-001-for-HP-model-number-DV6-1360us.aspx

    Kind regards

    DP - K

  • I need help to use my gateway as a monitor for mini mac 2011 2012

    OT: installation.

    I need help to use my gateway as a monitor for mini mac 2011 2012

    You should ask the community of Apple Mac

    Community: Mini Mac | Apple support communities

    Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  • Help finding a recovery disc for HP Pavilion dv6910us

    I need the recovery disc for this laptop. I was stupid not to do when there is new because I thought that the hard drive has a special section on it for recovery. But then it crashed. Replaced with a new hard drive, missing a lot of drivers and cannot go online with this model of Vista. Anyone know where to buy a game? Thank you.

    Hello

    If they are not available from HP, you can order the reliable dealer on the following link.

    dv6910US recovery disks.

    Kind regards

    DP - K

  • How can I get an acer recovery disc for a system that was sold to Singapore?

    Restore ACER Aspire 5680 disc

    Hi, I have an ACER Aspire 5680 running Vista Home premium, I bought in Singapore in 2007. I currently live in the United Kingdom, but I was updating dome drivers when the system blocked.

    I tried different ways to restart, but nothing helped. SO I bought an ACER restore disk and tried also without success. When I contacted ACER support told me I have to go to Singapore for the recovery disks, because the machines are different for the different continents! In the meantime, I have re-formatted the C: drive and am stuck.

    I contacted ACER Singapore, who indicated that the computer will have to return to the ACER workshop for recovery.

    It has been e_recovery aboard, but like many so I only took no notice of the password. But the recovery discs can be produced from a similar machine.

    Is there someone (possibly in Singapore) who created a set of recovery disc for this model they are willing to sell

    Please reply or send email to * address email is removed from the privacy *

    Thank you all

    Your Windows Vista Home Premium will reach its end of life of Microsoft support in two months in any case then consider purchasing a copy retail of Windows 7 from a UK dealer instead.  That will relieve you of the connection of Singapore and make a necessary upgrade to Windows 7.  Only Vista Business will continue to get the updates and fixes security after April 14,

    You will need to download the Windows 7 drivers for your Acer model before the upgrade.

  • Recovery disc for HP Pavilion dv6-1245dx

    Hello

    Recently my hard drive crashed on my HP pavilion dv6-1245dx running Windows 7 (64-bit). I bought a new hard drive, but I don't have a recovery disc for my Windows 7 64-bit operating system course. I tried to look in the Support & drivers of order recovery disks, but they offer only disks of Vista. How can I get the recovery disc for my computer? The warranty on this computer is exhausted.

    Hello:

    Product for your laptop specifications indicate that it comes with Windows Vista Home Premium 64-bit.

    What is the version of the Microsoft Windows product key sticker on the bottom of your laptop?

    If it is Vista, you will need to order a set of recovery disks Vista.

    If you have the product key 25 character Windows 7 64 bit you can make your own regular installation of W7 media and allows to install W7.

    Here is how to do this if you have the product key for W7...

    Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

    Use the product key of windows 7 of 25 characters to activate your installation.

    http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

    http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

  • My office is says I need to insert the vista recovery disc but I can't

    I have recently moved and have lost much of his property, however only one I need right now is windows vista disks. my computer came one morning and wouldn't start, now say that I need to use the recovery disc. What can I do without it? I have the sticker windows on the desktop... can I do? Please... I need to use the desktop computer as soon as it is such an inconvenience

    Hello

    read this:

    Ways to reinstall Vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Recovery disc for a pre-installed Ubuntu 14n (only) flag

    I bought a HP Pavilion 14-n258tx Notebook PC provided with Ubuntu preinstalled OS. A DVD of Windows 8.1 bought separatel with 8 GB of memory.

    I've manually updated Ubuntu to 14.04 faithful version. I created a new partition and loaded Windows 8.1. The laptop doesn't have a touch screen support. However, I do not use the 'Metro' Windows 8 features. My tablet is for that. There are a few features provided with Windows 8 "non-metropolitan" mode and I pretty much enjoy using 8.1 exclusively in mode "W7". I want to get out of dependence on Windows but appreciate having a Windows backup with the new unix environment.

    The BIOS has been F66 of Windows.  Update drivers through Windows via the HP support was simple. There was a problem with the Intel graphics before 2013-11-25, Version10.18.10.3325, updated 158,03 M always on the HP site. Graphical display would turn and the movement of the mouse was "sticky". An e-mail, I managed to come back from HP support that somewhere might suggest only there could be a problem with my system fan. Be sure to get updated 04/10/2014 of Intel 10.18.10.3907 now available via Windows update, which issue is resolved. Missing NVidia drivers are on the HP support site. I adapted my missing Bluetooth drivers to the preinstalled Ralink wireless driver.

    There was a HP_Tools partition which was lost very quickly to try to set up the dual boot. Confusion about the problems in the implementation of Grub2 has resulted in some attempts to complete reformatting/reload. Apparently this isn't Windows 8, which was change my setup dual boot on its own but, I am told, the bios of HP...

    "the problems you are experiencing are related to some known bugs in the implementation of HP EFI. "Basically, the firmware is hardcoded to start the bootloader from Microsoft and which make it difficult, if not impossible to boot from anything else.

    I have to live with it, finally begin directly in Windows and access to Ubuntu throgh esc/F9. I think it's quite precarious and likely to lose a lot of setup work by maybe an update has failed. Some documents on what's happening, or how to disable HP of W8 feature protection can be useful.

    I downloaded the UEFI environment. I told him to put it on a USB key, but it recharged HP efi files in the system partition despite. This is apparently not a problem...

    (No legacy support, secureboot and off quick start)

    End sector number of sectors system partition boot sector
    / dev/sda1 2 048 1 050 623 1 048 576 EFI system partition<  ="" plus="">
    data 665,833,472/dev/sda2 1 050 624 666,884,095 (Linux) partition
    / dev/sda3 1,448,515,584 1,465,147,391 16,631,808 swap partition (Linux)
    / dev/sda4 666,884,096 data partition (Windows/Linux) 781,631,488 1,448,515,583

    but I lost my key F11 on startup diagnostics that are only partially resumed through HP efi files.

    Apparently by my purchase of a single system preloaded Ubuntu Windows acquired separately, Miss me some features of Windows HP for the features below:

    HP utilities: can't see, Play, system event... confusing whether they are present or not

    some Cyberlink: "InstallShield Wizard is not a valid HP drive. The installation program stops now. "

    and imortantly...
    Windows Recovery 8: does not load message of incompatibility.

    RECOVERY

    originally PC only Ubuntu:
    Should I make wiping out shouldn't it be a recovery partition or a recovery disc to reload the original drivers in order to recharge then Ubuntu via a live recording?
    I should be able to recover my F11 diagnostics with that?

    Where can I retrieve F11?

    Windows 8.1:
    Yes, I have the disk Windows 8.1 and should be able to reinstall if necessary on the partition.
    I went to mine for the full recovery of the system of Windows 8?

    Or that is my problem of recovery environment mentioned above)?
    Wiped out I should wait to retrieve my comprehensive system drivers, etc. and Windows through my Windows system recovery?

    This certainly proved to be the learning experience than I expected! :-). This support site and the forum has been very useful. I'm very happy with the result. I could try to make a double machine (VMWare).

    Thanks for the help so far to have me almost through this.

    In the off topic about the Intel graphic display bug which results in putting on and off the screen (she came back! again), I guess its due to some incosistency between graphics and power features. Unfortunately, prevent the Windows driver updates prevents all updates driver that allows me to remove Windows Intel/use generic display make it impossible to solve other problems of driver (such as USB network emulator) and I had to disable the Intel graphics card so NVidia will not find his companion and I get just Windows base. I'm calling ths problem very soon.

    But the problem to avoid something that I didn't know before. That already by erasing partitions Windows or Ubuntu reloading Windows or Ubuntu will load the proper minimum drivers and from there I should be able to do all the updates for the drivers of HP for Windows or Ubuntu drivers I have installed manually from Ubuntu. And I now have enough backup for both OS/driver.

    Am I wrong in thinking that these system recovery discs won't boot your laptop won't start plu?

    And I deadended somewhere in the link of Malygris:

    Get a USB HP recovery disc or HP recovery disks with or without disc rec instructions

    above. I'll try once more...

    So I'm still very confused do not have diagnoses of the base system (via the TOOLS HP F11) for critical maintenance, update the bios and other tools for the recovery of corrupted system bios and the inability to start.

    (1) I can't HP_Tools to load on a USB key. Is it because I have got a usb BOOT drive? I am simply create a 20 GB fat32 partition called HP_TOOLS w / or w/o a drive letter on a spare 120 GB external USB and HP tools cannot find or create the partition of HP tools. It doesn't have to be loaded in a similar partition created from a shrunken Windows partition or create a partition on my hard drive as well.

    2) what facilities relevant to the boot/recovery should I expect the disk of "fast food" that I was informed (above) to get again the representative of HP on the phone says is not available to me for my model?

    (3) why can't I load the recovery of Windows 8 DAS?

    For my model:

    Drivers HP Pavilion 14-n258tx notebook PC

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=th&DLC=en&sw_lang=&product=6883259

    I'm going to Software Solutions

    Download: Microsoft Windows 8 recovery environment (RE) Recovery Manager Installer

    2013-10-04, Version6.00, 384,41 k:

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63774.exe

    When I open it, I get what I expect to see:

    TITLE: Windows 8 RE Recovery Manager install - TDC

    VERSION: 6.00 REV: A
    DESCRIPTION:
    User can boot to the Windows recovery environment and use "HP Recovery Manager" for units of recovery or backup files. The recovery feature are include 'System Recovery', 'Recovery of Image reduced to a minimum' and 'Factory Reset '.

    PURPOSE: recommended
    SoftPaq NUMBER: SP63774
    ENTRY INTO force: 4 October 2013
    CATEGORY: N/A
    SSM SUPPORTED: YES

    S/O SUPPORTED DEVICES:

    Prerequisite: no

    IMPROVEMENTS:
    -After the win8 to win8.1 upgrade, user starts to WinRE by F11 and will take much time.
    The SoftPaq reduce time waiting during boot to WinRE or start HP Recovery Manager over winRE.

    HOW TO USE:
    1. download the file by clicking on the button 'Download' or 'Get software' and save the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

    2. double-click the downloaded file and follow the on-screen instructions.

    After agreeing a DOS windows appears and disappears too quickly to read.

    It is not retrieved under c:swsetup or anywhere else.

    Can YOU please CHECK WHAT PACKAGE and advise how can I load the environment HP Windows recover. ???

    (4) I note there are other errors on this page of the driver, for example, Cyberlink Power Director is listed under software solutions but its download links for one download for another program.

  • Recovery disc for HP Mini

    I need to get or create a recovery disc for my mini HP laptop. I found them on the web site of HP for $40. Is there a way to create them or something? Sooner or later, I'm going to need to clean and reinstall. I can not really afford $40 for the installation discs.

    Is it possible to create them?

    Phillip

    Hi, Phillip:

    You should be able to create a set of recovery DVD using the HP Recovery Manager software, which should be in your menu "Al Programs".

    Paul

  • NB200-10Z: can't make the drive recovery using TOSHIBA Recovery Disc Creator

    Hi people,

    Finally got round to buying a USB DVD drive to create a recovery disc for my NB200-10Z. I received the following:

    * Samsung SE-S084C, external USB 2.0 Slimline 8 X DVD writer, black

    I tried twice to create a recovery disk and now find myself with two trashed DVD. The error in the error window codes are:

    Error code: 0E01B5-26 - 2A 040803
    Error code: 02016F-3 c-00000000

    The first time that the fire has been stopped, the second time of the verification failed.

    Anyone can shed some light on this?

    Hey mate,

    The disks that you use to create a recovery disk?
    I had a similar issue that he wasn t possible to create the recovery so media I bought Virgin s manufacturing another DVD (Verbatim DVD-R) and it worked!

    It seems that DVD - R media works well instead of DVD + R
    It s worth a try!

  • Recovery disc for Compaq Mini 110 c-1100DX

    Hello

    I contacted HP support several times over the past 2 years without success (a few times when I first bought this PC), so I thought I would try these forums.  I bought a Compaq Mini 110 c-1100DX with Windows XP a few years ago and wanted to create a recovery disc for it.  I followed the instructions, but I find that the typical HP, who is referenced in my manual, Recovery Manager does not exist.  HP support has confirmed this, but refuses to communicate any recovery disks support or operating system.  They said I could use the Roxio software that never worked to create or restore images.  I refuse to pay $16 for something my other HP computers 5 all allowed me to... create the factory recovery disks.  I have an external DVD burner, I have USB flash drives, and I have a desire to find a way to recover the original image.  I know that I can make an image of the disk because it is today, and I can use another software to create back ups.  I don't want to do that, I want the original image.

    Does anyone know of a place to download this image, a line of support that might be willing to send me the DVD recovery, or a way to connect with a more high level and preferably American, support staff?  I have 5 HP computers and printers HP 2, and I know the tech support/customer service line is a waste of time.  I'm good enough at the end of my rope with HP, and despite the fact that computers and printers have always been good support so so incredibly awful that I can't buy them more if I can't get this simple application is complete after 2 years of trying.  Any ready HP there at Carillon?

    For reference for anyone else having this problem (or any other issue, with the support of HP), I called 650-857-1501 (HP corporate), went to the business operator, explained my problem and the issues I had with the support of the founded India, she was very polite and transferred me to a very useful case manager named Emily and it solved the problem in 5 minutes.  I can't believe how much it was easy after suffering through hours and hours of race around the line of standard support.

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

Maybe you are looking for

  • How to add table 1 d to the report...

    I want to add table 1 d to a report, but when I use the table append to VI of the report, and then he wants to connect to table 2D. But if I want to add table 1 d to a standard report, so I don't know how to do this. Please help me with this... Thank

  • Unable to launch Skype

    Original title: how to start Skype

  • To access the encrypted files - after formatting the C drive

    Certain folders on my hard drive was encrypted by mistake and so that the upgrade of RAM, C drive has been formatted by the technician. Now I'm unable to access folders that have important information. I believe that the certificate for decryption wa

  • Connection Internet drops after 15 minutes 7 windows

    Original title: network goes down after 15 minutes 15 minutes after the start, I lose my connection to the internet. Another computer on my network still end. I tried restoring but it won't work. At the time of 95 to XP I would reinstall over the exi

  • Contacts and calendar POP3 Z10 blackBerry won t on Z10 sync

    I managed to get my email POP3 (COGECO) work, but my list of contacts and the calendar will not sync with my Z10. Anyone figured this out yet?