need help with a new e-mail address

Similar Questions

• Need help with a new SSD OCZ Agility 3

  I need assistance with my OCZ Vertex 3 60 GB SSD.

  I bought it yesterday because my current HARD drive is too slow.

  The problem is that I can't have my genuine version of Windows 7 Home Premium 64 - bit on it and I tried the system recovery DVD, I got from HP.

  Is my laptop: HP G62-b60SD

  Unfortunately my warranty has expired, so I hope someone could help me with this.

  In order to get my work of SSD, I just had to put an illegal version of 64-bit Windows 7 on it.

  But now I can't some functions to work, for example: disabling touchpad, brightness reduction etc.

  I have HP Support Assistant and assistant wireless network from several Web sites.

  How can I get my legal W7 Home Premium with the key functions of work in this regard?

  BTW, I use the SSD as my boot and the main driver and my old HDD is now elsewhere.

  Thank you very much for read/answer/help me already.

  Hello

  Before you try the following, make sure that you can always read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

  Create an installation disk yourself using another PC - just download the good Disk Image from the link below (this has to be the same version as your original OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it's the commercial version accurate , you would need).

  Use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to complete the installation of Windows 7 on your new SSD, enter the activation key of Windows on the label of the COA in the request and one time Setup is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just that a new installation of Windows 7 without software load additional normally comes with facilities OEM.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Drivers and additional software you may need for your laptop can be found here.

  Kind regards

  DP - K

• BlackBerry Q10 need help with settings for e-mail account on Q10.

  I used to have Bold9900 and possible to set different "Username" and "E-mail".

  Both will be in the form of e-mail, so recipients will see my name of the sender as the enamel on the 'User name' field and cannot see my real mail. (Provided by loxinfo @cscoms.com)

  However, once that the device was introduced to the new Q10. It is more possible to do.

  I have to use the same information on both fields.

  Is there anyway that I can check the parameters of Q10?

  Note: It is always also work the same way as Bold9900 on the iPad.

  Hello and welcome to the community!

  I don't know, from your description, exactly what you're looking for. "Username" and "E-mail"? You may be looking for the ability to enter a 'reply-to' e-mail address which is different from the actual email address of the account you are sending from? If so, this feature is indeed not currently available in BB10. Among other features, this is perhaps one that many hope are added to the BB10 platform with future versions of the operating system. But for now, it is what it is.

  Good luck!

• Need help with MWI for voice mail on SIP with SPA9000

  I can't get my MWI to work with my answering machine SIP.  I have:

  SPA9000

  1 SPA962

  1 SPA941

  My ITSP is Mconnect and my SIP phone number is configured for line 1 on the SPA9000.

  I am using their voicemail.  I want the MWI light only on my phone SPA962.  I packed an id 1101 for this phone's mailbox.  I can press the message button and connect to my voicemail, but I don't get a MWI when I have new voicemail.

  Here are the settings for voicemail, I SPA9000 > voice > line 1:

  Mailbox repository URL: mysiptelephonenumber@line1proxy

  URL for mailbox management: even the form of mailbox repository URL

  Mailbox subscribe URL: it is indifferent to what I put in this context, nothing works.

  MConnect gave me a few things to try, but they do not work either.

  Any help is greatly appreciated.

  Marti

  I googled my question and found the answer here on this forum in a post from last year!  My MWI now works as it should when I have voice mail on my SIP line.

  Here is the link to the post on this forum where I found the answer:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Phones&thread.ID=3899

  Also be sure to enter the URL for the mailbox to subscribe, filing and management.

  Mine are my number of mailbox @ the proxy for the line that my SIP line is activated, which is Line 1

  Marti

• Need help with a new hard drive in pavillion wiring elite M9400

  Hello fellow owners HP,.

  I recently bought a 1 TB hard drive for my Pavilion Elite M9400T.  I done my share of reading about installing to a new hard drive to another former post office and know how to physically install the disk in the slot, but my question starts with the wiring.

  I have a M9400T and saw the video of the installation here in this post.  I read to the bottom when he talks about the installation of additional hard disks into the empty Bay and had questions about the son in photo 5 on the photo below. I realized that I needed a Sata cable, so I bought one today, but I wonder if I can use other cables inside the case already for power. And who will be all I have to do to get this properly installed disc? I took pictures so that it would be easier for me to ask for help.

  

  

  A and B belong to my main hard drive and I want to know if I can use D (unused but looks like B) and a Sata cable bought my 2nd hard drive. I also noticed that B is related to C, which leads to the motherboard, so I didn't know if I needed to do the same for the 2nd drive.

  

  Connectors SATA 1 and 6 are taken by my hard drive and DVD drive (I think) cannot so I just put my 2nd hard drive on one of the remaining of the caps of 2-5?

  Thanks in advance for any and all tips and suggestions.

  BTW, I I was able to install the sticks of memory 2x2gb today without any problems for a total of 6 GB today but no matter what slots? I added the 2 slots of the fan and it seems to work very well.

  SO, Yes, you can use power connector would be ' for your new hard drive.  If you look closely at the image of a ' and follow the Red wire, it runs directly on the white molex (P4) beside the PSU connector.  He doesn't have to go to the motherboard.  Is not feed all the other components.

  Message edited by old_geekster on 11/13/2009 10:50

• BlackBerry Smartphones need help with the new sim card

  I don't know why I have such a hard time finding how to do this. It's really making me feel like a * beep * here, so any help will be appreciated

  I'm on Sprint here in the United States and I'm on a trip to Romania in a few weeks and I wanted to have my phone all set up in advance. I bought a prepaid SIM Vodafone Romania, and told me that it is active and active international roaming. I tried it in 2 unlocked bolding my 9930 current and my old 9650. All I get is SOS and emergency calling only, both on AT & T or T-Mobile. I can't yet figure out how to get the phone number attached to the card. What's on the map with that he came are BPUK PIN and PUK. And I can't record with MyVodafone on their website without the phone number. I don't really know how to proceed. I was hoping to use SMS in roaming here until I leave.

  Thanks in advance...

  I was able to get the activated through e-mails with vodafone SIM. Just post here my solution in case anyone has the same problem.

• I need help with fusion and direct mail with attachment PDF!

  I am trying to send more than 400 emails via the mail with an attachments in PDF to Word 2013. My earlier version of Word had the MERGE feature in PDF format and when I upgraded to the word 2013, he disappeared. Can someone help me? Is it an add-on I'm supposed to be? Thanks a bunch!

  Taushadoll

  Yes, or you can downgrade (Acrobat or office)...

• Newbie needs help with the new system specs!

  I need to upgrade my system to my work because of the need to begin to use Camtasia and Premiere Pro CS6 (as well as other elements CS6).  I'm not a computer expert and the machine below will be set up for me next week.  I have a few questions that I had grealtly appreciate any feedback on:

  1. Do you think that in general my new system specifications are not enough for basic audio/video editing of SD and HD material?
  2. Can I expect a significant increase in the quality of video playback, as well as a reduction in the time of video rendering while you use Camtasia and Premiere Pro?
  3. Is my diet is going to be enough for the specifications below and if not what is the danger of not leveling who?
  4. If there is some thing/nothing else I had to upgrade what would it be?

  I work for a retail tile distrubtor with about 130 employees.  Training videos, that I create are mostly screenshot simple and basic videos that do not require a TON of high-end editing.  I use a lot of images JPEG high resolution and basic SD video sequences captured from a camcorder Canon GL2 (Mini DV cassettes).  Us will modernize ends up the camera, but that's what I use now.

  The previous computer I had suffered with very choppy video playback and long video rendering times and so I convinced my boss and IT Manager needs an improved system that has a faster processor, a better video card and more RAM.  I used my old system this year and the other takes place next week, is listed below.

  Thanks a TON for anyone who feels inclined to provide information!

  Andrew

  New system:

  HP Compaq Elite 8300

  • Win 7 64 - bit operating system
  • CPU i7-3770
    • 3.4 GHz
    • 8 MB Cache
    • 4 cores
  • Quadro 2000 D (62 watt max current absorbed) graphic card
  • 12 GB of RAM (4 GB statndard, added two other cards of 4 GB)
  • 1 TB SATA hard drive 7200 RPM
  • Intel Q77 Express Chipset
  • 320 watts power (stock)

  Old system:

  HP Compaq 4000 Pro (small size)

  • Win 7 64 - bit operating system
  • Processor Pentium Dual Core E6600
    • 3.06 GHz
    • ? MB Cache
    • 2 carrots
  • NVIDIA NVS 300 Graphics Card
  • 8 GB of RAM (4 GB statndard, added a card of 4 GB more)
  • 457 GB hard drive
  • ? Chipset

  Added CPU, system, a couple of USB devices fans cooler fans, etc.

  I did the calculation with an i7-3770 stock, 3 sticks of RAM, a graphics Quadro 2000, 2 USB, 2 x 120 mm, SATA 2 x 7200 RPM drives fans devices, 1 DVD burner, 30% capacitor aging and a 100% load system and come to this:

  

  There is no room for manoeuvre for any expansion at all. Not even add more USB devices.

• Need help with Javascript automated e-mail

  I am trying to modify a form to add a button that takes the values of the fields that will be filled in by the user and then send an email using these fields

  currently I have the following script:

  var A = xfa.resolveNode("topmostSubform.Page1.Work_Order__").rawValue;
  var B = xfa.resolveNode("topmostSubform.Page1.NOMENCLATURE").rawValue;
  var PPC = xfa.resolveNode("topmostSubform.Page2.Email_Address_PPC").rawValue;
  void var = 'work created order. "
  var msgBody = "Order of work" + A + "\n for the" B + "program has been created"; "."
  app.mailMsg ({}
  bUI: false,
  cTo: PPC,.
  bassujetti: void.
  CMSG: msgBody,
  });

  Thanks for your help,

  John

  Hi John,.

  Your script looks not too bad. Here is our generic script:

  var vEmail = "[email protected]";
  var vSubject = "A Subject for your email";
  var vBody =  "Put your body message here...";
  
  event.target.app.mailMsg({
       bUI: true,
       cTo: vEmail,
       cSubject: vSubject,
       cMsg: vBody
  });
  

  Try putting "event.target." before the app.mailMsg. Also you need not of the xfa.resolveNode, if the items, pages, and the subofrms are appointed.

  Hope that helps,

  Niall

• A2107A new user needs help with a new media player

  Hi please can anyone suggest a good player to install on my Ideapad A2107A as a built-in custom plays several popular formats such as MKV and some others.i have installed free VLC Player, but I use potplayer on my PC which is excellent and will play all formats, I need... only it is not listed in the application listed , but only "DAUM" is (responsible for the coding of potplayer) I need to use the player in the Portugal where access to broadband is not very good... I'm going on vacation that's why I bought my Lenovo... Thanks a lot for all the help on this topic

  Hi, adrian631330

  Welcome to Lenovo community Fourms!

  I think you can see this Post.

  http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/A1-the-best-video-players/m-p/648187/highl...

  You might just find the right App for you!

  Hope this helps,

• Need help with the new graphics card

  So my trusty GTX 555 is finally dying after 4 years and 10 000 + hours so I looked in an upgrade and heard the GTX 960 would be a good upgrade for an Alienware x 51 R1. So I got a PNY GeForce GTX 960 Amazon and installed but when I turn on my system it passes to the BIOS screen and is there for about a minute and a half and it beeps every 30 seconds after the screen came. After the minute and a half or two then goes to a black screen and says the brand and model of graphics card in the upper left corner for about 5 seconds, then he sits on a black screen. I did something wrong?

  If necessary system specs:
  330W POWER SUPPLY
  Intel Core i7 2600
  8 GB RAM
  Windows 7

  Have you updated the BIOS?

• Need help with Windows 7 key.

  I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

  The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

  Need help please.

  You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

  

  How to change Windows 7 product key

  http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• New user needs help with the creation of an animation :)

  Hello

  IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

  I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

  Would appreciate any help!

  There are several ways to do so.

  One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.