Need help with configuration on cisco vpn client settings 1941
Hey all,.
I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...
If anyone can help with orders?
I need the installation:
user names, authentication group etc.
Thank you!
Take a peek inside has the below examples of config - everything you need: -.
http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html
HTH >
Andrew.
Tags: Cisco Security
Similar Questions
-
Another problem with the configuration of Cisco VPN Client access VPN Site2site
We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site. JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support. So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0
Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.
CORP netowrk 192.168.1.0
IP VPN 192.168.12.0 pool
Colo 10.1.0.0 internal ip address
Also, here's an example of my config ASA
: Saved
:
ASA Version 8.2 (1)
!
hostname lwchsasa
names of
name 10.1.0.1 colo
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
backup interface Vlan12
nameif outside_pri
security-level 0
IP 64.20.30.170 255.255.255.248
!
interface Vlan12
nameif backup
security-level 0
IP 173.165.159.241 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network NY
object-network 192.168.100.0 255.255.255.0
BSRO-3387 tcp service object-group
port-object eq 3387
BSRO-3388 tcp service object-group
port-object eq 3388
BSRO-3389 tcp service object-group
EQ port 3389 object
object-group service tcp OpenAtrium
port-object eq 8100
object-group service Proxy tcp
port-object eq 982
VOIP10K - 20K udp service object-group
10000 20000 object-port Beach
the clientvpn object-group network
object-network 192.168.12.0 255.255.255.0
APEX-SSL tcp service object-group
Description of Apex Dashboard Service
port-object eq 8586
object-group network CHS-Colo
object-network 10.1.0.0 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.1.0 255.255.255.0
host of the object-Network 64.20.30.170
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
service-object icmp traceroute
the purpose of the service tcp - udp eq www
the tcp eq ftp service object
the purpose of the tcp eq ftp service - data
the eq sqlnet tcp service object
EQ-ssh tcp service object
the purpose of the service udp eq www
the eq tftp udp service object
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
ICMP service object
EQ-ssh tcp service object
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0
outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
outside_pri_access_in list extended access permit tcp any interface outside_pri eq www
outside_pri_access_in list extended access permit tcp any outside_pri eq https interface
outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100
outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface
outside_pri_access_in list extended access permit icmp any any echo response
outside_pri_access_in list extended access permit icmp any any source-quench
outside_pri_access_in list extended access allow all unreachable icmp
outside_pri_access_in list extended access permit icmp any one time exceed
outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586
levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0
outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0
outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0
outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0
Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list
OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0
L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
exploitation forest asdm warnings
record of the rate-limit unlimited level 4
destination of exports flow inside 192.168.1.1 2055
timeout-rate flow-export model 1
Within 1500 MTU
outside_pri MTU 1500
backup of MTU 1500
local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 100 burst-size 5
ICMP allow any inside
ICMP allow any outside_pri
don't allow no asdm history
ARP timeout 14400
NAT-control
interface of global (outside_pri) 1
Global 1 interface (backup)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside_pri) 0-list of access OUTSIDE-NAT0
backup_nat0_outbound (backup) NAT 0 access list
static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns
static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns
Access-group outside_pri_access_in in the outside_pri interface
Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1
Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254
Timeout xlate 03:00
Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
http server enable 981
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside_pri
http 0.0.0.0 0.0.0.0 backup
SNMP server group Authentication_Only v3 auth
SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt connection tcpmss 1200
monitor SLA 123
type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outside_pri
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_pri_map 1 match address outside_pri_1_cryptomap
card crypto outside_pri_map 1 set pfs
peer set card crypto outside_pri_map 1 50.75.217.246
card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5
card crypto outside_pri_map 2 match address outside_pri_cryptomap
peer set card crypto outside_pri_map 2 216.59.44.220
card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
86400 seconds, duration of life card crypto outside_pri_map 2 set security-association
card crypto outside_pri_map 3 match address outside_pri_cryptomap_1
peer set card crypto outside_pri_map 3 216.59.44.220
outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto outside_pri_map interface outside_pri
crypto isakmp identity address
ISAKMP crypto enable outside_pri
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 50
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
!
track 1 rtr 123 accessibility
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd auto_config outside_pri
!
dhcpd address 192.168.1.51 - 192.168.1.245 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
rental contract interface 86400 dhcpd inside
dhcpd field LM inside interface
dhcpd allow inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection host number rate 2
no statistical threat detection tcp-interception
WebVPN
port 980
allow inside
Select outside_pri
enable SVC
attributes of Group Policy DfltGrpPolicy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal GroupPolicy2 group strategy
attributes of Group Policy GroupPolicy2
Protocol-tunnel-VPN IPSec svc
internal levelwingVPN group policy
attributes of the strategy of group levelwingVPN
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl
username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard
aard attribute username
VPN-group-policy levelwingVPN
type of remote access service
rcossentino 4UpCXRA6T2ysRRdE encrypted password username
username rcossentino attributes
VPN-group-policy levelwingVPN
type of remote access service
bcherok evwBWqKKwrlABAUp encrypted password username
username bcherok attributes
VPN-group-policy levelwingVPN
type of remote access service
rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username
rscott username attributes
VPN-group-policy levelwingVPN
sryan 47u/nJvfm6kprQDs password encrypted username
sryan username attributes
VPN-group-policy levelwingVPN
type of nas-prompt service
username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0
username cbruch attributes
VPN-group-policy levelwingVPN
type of remote access service
apellegrino yy2aM21dV/11h7fR password encrypted username
username apellegrino attributes
VPN-group-policy levelwingVPN
type of remote access service
username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5
username rtuttle attributes
VPN-group-policy levelwingVPN
username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin
username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0
username nbrothers attributes
VPN-group-policy levelwingVPN
clong z.yb0Oc09oP3/mXV encrypted password username
clong attributes username
VPN-group-policy levelwingVPN
type of remote access service
username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0
username attributes finance
VPN-group-policy levelwingVPN
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
Disable ISAKMP keepalive
tunnel-group 50.75.217.246 type ipsec-l2l
IPSec-attributes tunnel-group 50.75.217.246
pre-shared-key *.
Disable ISAKMP keepalive
type tunnel-group levelwingVPN remote access
tunnel-group levelwingVPN General-attributes
address LVCHSVPN pool
Group Policy - by default-levelwingVPN
levelwingVPN group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group 216.59.44.221 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.221
pre-shared-key *.
tunnel-group 216.59.44.220 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.220
pre-shared-key *.
Disable ISAKMP keepalive
!
!
!
Policy-map global_policy
!
context of prompt hostname
Cryptochecksum:ed7f4451c98151b759d24a7d4387935b
: end
Hello
It seems to me that you've covered most of the things.
You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel
outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo
Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.
-Jouni
-
multi-site VPN with just the cisco vpn client
Hello everyone
Please I need your help.
We have a headquarters office and up to 60 is BranchOffice, we want to create VPN network between its. so let's deploy 2 router cisco esy vpn server with HA (HSRP) at the Headquarters Office and all branches have Connection ADSL and they will use just the cisco vpn client to connect to the Headquarters Office.
My question is: is it possible to do it just with the client vpn cisco without purchased for any exercise bracnh a cisco router to create an ipsec tunnel because it is so expensive?
It depends on if the routers to offices can handle NAT with several internal VPN clients to 1 IP address. Most of the new material should be fine. Keep in mind the maximum limit of the VPN client, with 60 agencies and 5 people each of whom you are above the limit.
Michael
Please note all useful posts
-
Configure the Cisco VPN client to pass through the VPN site-to-site (GUI)
Hello
I say hat the chain and responses I've seen to achieve this goal have been great...
https://supportforums.Cisco.com/discussion/12234631/Cisco-ASA-5505-VPN-p...
and
https://supportforums.Cisco.com/document/12191196/AnyConnect-client-site...
My question is "we will get this configuration by using the graphical user interface for someone who is not notified about the command line?"
Thank you
Of course, all this can be configured via ASDM.
Looking at the second example you posted above, they point you first change:
ACL split of the tunnel for the AnyConnect customer
This Configuration > remote access VPN > network (Client) access > AnyConnect connection profile > (chose the profile and select Edit) > (choose "Manage" next to group policy) > Edit > advanced > Split Tunneling > ensure that the policy does not "Inherit" but rather "Tunnel network list below" > Unselect "Inherit" next to the network list, then 'manage '. Enter your networks you want in the GUI in this dialog box. Click OK all the way back to the main window ASDM and click on apply.
You then change:
Crypto ACL for the tunnel from Site to Site
To do this, go to Configuration > VPN Site-to_site > connection profiles > (choose your profile and select edit) > add the VPN client address pool to the list of local network between protect networks. Yet once, click OK all the way back to the main window ASDM and click on apply.
Then, allow the
ASA to redirect back on the same interface traffic it receives
.. is defined under Configuration > Device Setup > Interfaces. (check the box at the bottom of this screen). Click on apply
Finally, there is the NAT exemption. For which go to Configuration > firewall > rules NAT. Add a NAT device rule before rules network object with Interface Source out, Source address your address pool VPN, the Destination address to include remote subnets and Action is Static Source NAT type source address and destination address remaining as original (i.e. without NAT). Once on OK all the way back to the main window ASDM and click on apply. Save and test.
Good luck. Don't forget to note the brand and posts useful when your question is answered.
-
Debugging - need help with configuration
I also posted this in advanced by accident...
I need help to my local development for CFBuilder debugging machine configuration. Developing CF applications is configured correctly, but I have problems configuring settings for debugging for CFBuilder/Eclipse. CFBuilder is installed and connected to RDS, and CF administrator is configured to debug level line. I'm running Windows 7 x 64 with ColdFusion 9 (using IIS).
All my projects are in my "C:\Dev" folder, and each project contains a folder "www", which is the root of the web project. So, I have my projects organized like this:
C:\Dev
TestSite
design
docs
www <-web root folder
, I have created a ColdFusion project and he mapped directly to the folder root 'www '. In IIS, the web root folder is mapped via a virtual directory under the web site default and is accessible from "http://127.0.0.1/testsite"" "
I have configured my RDS server that works correctly, so I can see the databases on the server. Nice. I also set up a server in the list of servers in the perspective of coldfusion and imported directly from my RDS server settings. It has the same name as my RDS Server, which is 'Server RDS Local.' I also added a URL prefix for "testsite" which is mapped to the local path: (C:\Dev\TestSite\www) and "http://127.0.0.1 \testsite. And finally, in Debug maps (preferences window), I said 'Server RDS Local.'
Everything seems to be installed, but I can not debug. Here's what happens:
Of the ColdFusion perspective, I click with the right button on index.cfm and select "Debug-> ColdFusion Application" the first time I do it, it switches on the ColdFusion debugging Perspective and loads of " " http://Homepage/ 'and then nothing seems to work. On the debugging tab, it shows me that he has created a new launch for my project as follows:
TestSite
Local RDS Server
Model of ColdFusion
I see my breakpoint in my breakpoints tab. But I can't seem to get any further. I can't find a way to run at my breakpoint. The home page for the current debugging session is "http://homepage/" which is something I don't understand. How CFBuilder go to the correct home page for the debug session? Maybe that's the key of.
Hello
Please right click on the project, and you will see an option "set the URL prefix. Allows to set the URL of your project.
Thank you!
Bhakti
-
Need help with attention not approved VPN server certificates.
I've been on the many other posts about it, and they all seem a bit different, so I started my own thread.
I was sent to my users via the ASA AnyConnect 3.1.02026, and we all get the warning of the Cert of untrusted when connecting VPN server.
When the ASA deploys the client, it puts the external IP of the SAA as the host name, which causes the error.
So I have two questions: 1. How can I get the ASA to make host name "vpn.cfo.com" when a user installs the client and 2. How can I change my cert so that it does not show the internal name of the ASA and use 'vpn.cfo.com' instead?
Here are all the news that everyone should not (I) help to think
SSL-trust ASDM_TrustPoint0 OUTSIDE_PRIMARY point
Certificate
Status: available
Of the certificate number:
Use of certificates: Signature
Public key type: RSA (1024 bits)
Signature algorithm: SHA1 with RSA encryption
Name of the issuer:
hostname = ambossfw01.cfopub .net
CN = ambossfw01
Name of the object:
hostname = ambossfw01.cfopub .net
CN = ambossfw01
Validity date:
start date: 15:17:42 EDT June 2, 2011
end date: 15:17:42 EDT May 30, 2021
Trustpoints Associates: ASDM_TrustPoint0
CA
Status: available
Of the certificate number:
Certificate use: general use
Public Key Type: RSA (2048 bits)
Signature algorithm: SHA1 with RSA encryption
Name of the issuer:
CN = VeriSign Class 3 Public Primary Certification Authority - G5
or = (c) 2006 VeriSign\, Inc. - authorized only use
OU = VeriSign Trust Network
o = VeriSign\, Inc.
c = US
Name of the object:
CN = VeriSign Class 3 Secure Server CA - G3
OU = terms of use at https://www.verisign.com/rpa (c) 10
OU = VeriSign Trust Network
o = VeriSign\, Inc.
c = US
OCSP AIA:
CRL Distribution points:
[1] http://crl.verisign.com/pca3-g5.crl
Validity date:
start date: 19:00:00 EST February 7, 2010
end date: 18:59:59 EST February 7, 2020
Trustpoints Associates: _SmartCallHome_ServerCA
Any help would be greatly appreciated.
Hello
Cisco has made a strict checking of KU and EKU in recent versions of AnyConnect, which leads to the warning you got.
To my knowledge, if you go to 3.1.00495, you will not get this warning, if not, you need to get the valid KU and EKU fields in your certificate of ASA.
To use specific trustpoint, please check the 'truspoint ssl' command in global configuration mode.
Mashal
-
Need help with configuration of VLAN SF300-24
Hello
Let me Preface this with the fact that networking is certainly not my point hard, so here, any help is greatly appreciated.
I'm trying to segment on a virtual desktop on its own VIRTUAL local network infrastructure using a Cisco SF300-24 Layer 3 switch. I can get the switch to connect to the network with the assigned VLAN 1 an IP address on the subnet of the network (192.168.16.X), but I can't get anything this is set up VLAN 20 (192.168.20.X subnet) to connect past the VLAN 20 (192.168.20.254) gateway IP. The ports assigned to 20 VLAN are defined to access the mode if it matters.
Here is a diagram to illustrate what it looks like, as there is another (L2) switch involved.
So I'm not really sure what I am missing here since all settings seem simple enough.
Hi Simon, I recommend you remove any server active directory and essentially remove all safety factors. This will give the idea of where to start.
If you take a quite basic set, 2 Windows 7 workstations without a Firewall window activated, they both work as expected.
It must be remembered that in firewalls, even if they are able to respond to ICMP if the request is from a different subnet, they will not be because he is recognized as a network abroad. You must know the network on these computers or make sure the computer does not care.
You may be able to do this by simply adding additional subnets on the advanced configuration of the network card (if it does not take too much address space) as an example.
Or well, as you have discovered that you can add routes, which is a bit heavy and inconvienent, but effective.
-Tom
Please mark replied messages useful -
32L4333DG TV - need help with configuring WLAN
I bought a flat 32L4333DG of Toshiba, but cannot configure the wireless connection.
Help me please.Message was edited: assignment has been translated
What's the problem? Have you read the instructions in the manual how to connect WiFi TV?
There are 3 different methods to configure the WLan configuration:
_1) easy Setup (WPS) _
+ If the AP is WPS compatible, this method can be used. +
+ WPS is a standard of the industry, designed to facilitate the wireless LAN connection and security settings. WPS automatically configures all the wireless settings. +
+ NOTE: WEP encryption is perhaps not able to configure through easy implementation. +_2) assisted Setup (installation using notification s AP information) _
+ Name network, authentication and encryption are decided according to the information provided by the AP. You can manually set the security key. +
+ The security key must conform to these conditions: +.
+ TKIP/AES: ASCII 8-63 or 64 Hex characters +.
+ WEP: codes ASCII 13 5 or 10 or 26 Hex characters +.
+ There's a key ID to set for the WEP encryption. +_3 _) manual configuration (manual entry of all parameters)
+ Some types of encryption are only compatible with specific authentication types. +
+ When authentication is an open system, only WEP or none is compatible. +
+ When authentication is shared key, WEP is compatible. +
+ When authentication is WPA - PSK or WPA2-PSK, TKIP or AES is compatible. ++ When the inconsistent authentication/encryption pairings are detected, a warning message will be displayed and no connection attempt will be until the conflict is resolved. +
+ There's a key ID to set for the WEP encryption. +
-
Need help with configuration without wire - JO L7680
I my 7680 on a wired network and cannot find a way to convert wireless. We now have a wireless router and Windows 7 and that you can not use the cable as a result of physical limitations. I keep seeing reference to Wireless Wizard, but it does not appear in Control Panel. What I have to reset everything and download the installation package again to set up or y at - it another way? Thank you
Don't forget to download the updated drivers from http://goo.gl/E3nxG.
If you already have the drivers installed, then you can click on the start menu of the Win7 PC.
* Click on all programs
* Click the HP folder
Open the series record for the L7680 (or a similar name)
* Select Add a deviceor you can re - install.
When you select wireless software will guide you through the connection of a USB cable from the PC to the printer. This will allow you to enter settings wireless into the software and the software will transfer the information to the printer. After the installation or the addition of a device is done, then you can unplug the USB cable and use the wireless printer.
I hope this helps.
-
RV120 VPN with full Cisco VPN Client?
Is it possible to configure the RV120 for a VPN IPsec for use with the complete Cisco VPN client?
I tried, but it does not appear to support "Goup of authentication.
I see in the confi router I can put a PSK, but the complete VPN client seems only accecpt "Goup authentication."
I managed on the basis for the work "Fast VPN", how it works is beyond me, because he does not appear to create an adapter with an IP address or anything on the local line, and I didn't even create a VPN policy...
Or put another way, what alternative (Free) VPN clients are there to work with the RV120?
Try the following link for instructions for Cisco VPN and the SA500:
I hope this helps.
Thank you
Rick Roe
Cisco Small Business Support Center
-
IPSec site to site VPN cisco VPN client routing problem and
Hello
I'm really stuck with the configuration of ipsec site to site vpn (hub to spoke, multiple rays) with cisco vpn remote client access to this vpn.
The problem is with remote access - cisco vpn client access - I can communicate with hub lan - but I need also communication of all lans speaks of the cisco vpn client.
There are on the shelves, there is no material used cisco - routers DLINK.
Someone told me that it is possible to use NAT to translate remote access IP-lan-HUB customers and thus allow communication - but I'm unable to set up and operate.
Can someone help me please?
Thank you
Peter
RAYS - not cisco devices / another provider
Cisco 1841 HSEC HUB:
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key x xx address no.-xauth
!
the group x crypto isakmp client configuration
x key
pool vpnclientpool
ACL 190
include-local-lan
!
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec transform-set esp-3des esp-sha-hmac 1cisco
!
Crypto-map dynamic dynmap 10
Set transform-set 1cisco
!
card crypto ETH0 client authentication list userauthen
card crypto isakmp authorization list groupauthor ETH0
client configuration address card crypto ETH0 answer
ETH0 1 ipsec-isakmp crypto map
set peer x
Set transform-set 1cisco
PFS group2 Set
match address 180
card ETH0 10-isakmp ipsec crypto dynamic dynmap
!
!
interface FastEthernet0/1
Description $ES_WAN$
card crypto ETH0
!
IP local pool vpnclientpool 192.168.200.100 192.168.200.150
!
!
overload of IP nat inside source list LOCAL interface FastEthernet0/1
!
IP access-list extended LOCAL
deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
deny ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
IP 192.168.7.0 allow 0.0.0.255 any
!
access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
!
How the DLINK has been configured for traffic between the site to site VPN subnets? You are able to add multiple remote subnets on DLINK? If you can, then you must add the pool of Client VPN subnet.
Alternatively, if you cannot add multiple subnet on DLINK router, you can change the pool of Client VPN 192.168.6.0/24, and on the crypto ACL between the site to site VPN, you must edit the 180 existing ACL
DE:
access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 180 allow ip 192.168.200.0 0.0.0.255 192.168.1.0 0.0.0.255
TO:
access-list 180 allow ip 192.168.6.0 0.0.1.255 192.168.1.0 0.0.0.255
Also change the ACL 190 split tunnel:
DE:
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.200.0 0.0.0.255
TO:
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.6.0 0.0.0.255
access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.6.0 0.0.0.255
Finally, replace the remote subnet 192.168.7.0/255.255.255.0 192.168.6.0/255.255.254.0 DLINK.
Hope that helps.
-
Cisco VPN client + VPN site-to-site
Hi all
I have two ASA5505 with a site to site VPN.
One of the ASA is connected to the internal network 192.168.150.0.
It is connected to 192.168.151.0.
I also configured IPSec Cisco VPN client that is connected to 192.168.150.0.
I would like to know if it is possible for a connected with the Cisco VPN client to access the 192.168.151.0 by the site-to-site VPN network.
Thank you!
Hello
If you mean that the IP addresses of the VPN Pool are something like 192.168.150.x then I suggest to use a totally different network than those used on LANs.
At the software level 9.1 basically causes changes to how are the NAT0 configurations.
MAIN SITE
network of the VPN-POOL object
subnet x.x.x.x y.y.y.y
being REMOTE-LAN network
192.168.151.0 subnet 255.255.255.0
destination of static NAT VPN VPN-POOL POOL (outdoors, outdoor) static REMOTE - LAN LAN
REMOTE SITE
network of the VPN-POOL object
subnet x.x.x.x y.y.y.y
the object of the LAN network
192.168.151.0 subnet 255.255.255.0
NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL
Otherwise, I would imagine that the same kind of configurations above apply. You need the ' same-security-movement ' command to allow the 'outside' to ' outside ' of the movement. You will have to ensure that the ACL from Tunnel Split contains the remote site network. And of course, you should make sure that the ACL crypto sets / include traffic between VPN pool and the network 192.168.151.0/24 on both sides ASAs.
-Jouni
-
Need help with native VPN client for Mac to the Configuration of the VPN router RV082
Guys,
I am trying to set up router RV082 VPN Client with native Mac for my remote access. However, no matter what I did, I'm not able to make works. Can any give me an example of how to set my router RV082 and Mac Book Pro (Mountain Lion)?
Thank you
Hi Jixian, the native client MAC does not work. The IPSEC VPN client is the same as the 5.x Cisco VPN client is not supported on this device.
Your alternatives are to use PPTP or a 3rd party IPsec client such as ipsecuritas.
-Tom
Please evaluate the useful messages -
Configuration of Cisco for Cisco VPN Client ASA 5505
Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.
When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.
There step by step guides to create the connection profile file to distribute to customers?
Hello
The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.
You will need to set the same in the client, so that they can negotiate and connect.
Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name
Host will be the external ip address of the ASA.
Group options:
name - same tunnel as defined on the ASA group
Password - pre-shared as on ASA.Confirm password - same pre-shared key.
Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.
You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.
Kind regards
Anisha
-
Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type
Type of TG_TEST FW1 (config) # tunnel - group?
set up the mode commands/options:
Site IPSec IPSec-l2l group
Remote access using IPSec-IPSec-ra (DEPRECATED) group
remote access remote access (IPSec and WebVPN) group
WebVPN WebVPN Group (DEPRECATED)FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
FW1(config-tunnel-IPSec) #?configuration of the tunnel-group commands:
any required authorization request users to allow successfully in order to
Connect (DEPRECATED)
Allow chain issuing of the certificate
output attribute tunnel-group IPSec configuration
mode
help help for group orders of tunnel configuration
IKEv1 configure IKEv1
ISAKMP policy configure ISAKMP
not to remove a pair of attribute value
by the peer-id-validate Validate identity of the peer using the peer
certificate
negotiation to Enable password update in RADIUS RADIUS with expiry
authentication (DEPRECATED)FW1(config-tunnel-IPSec) # ikev1?
the tunnel-group-ipsec mode commands/options:
pre-shared key associate a key shared in advance with the connection policyI'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)
Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..
But it would be nice to have a bit more security on VPN other than just the connections of username and password.
If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?
If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?
I really hope that something like this exists still!
THX,
WR
You are welcome
In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.
With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.
Maybe you are looking for
-
Hardware failure if I open Adobe apps or iTunes
I'm having a horrible time, sorting by a hardware failure in a 3.5 GHz 6-Core MacPro problem. After that he crashed during his sleep, I am not able to launch Adobe applications or iTunes without another immediate material failure. I trashed every ima
-
Using Droid Turbo as a TV remote control
Did someone using their Droid Turbo as a remote control for their TV? If so, what App do you use, and how does it work? Thank you
-
PC does not recognize video card
I had bought an EVGA Geforce GT610 graphics card and installed in my HP Pavilion 500 - 54 (Windows OS 8.1). When I tried to install the video drivers (latest drivers from EVGA) for the new video card I received a message as the "graphics driver canno
-
Inspiron 17R SE 7720 - Audio from headphones and speakers
When I plug my headphones, sound still comes from my speakers. The popup asking what device I plugged is no - longer everytime I plug my speakers - but it does to the microphone socket.
-
How to position the dipole antennas
Our installers have placed at each Access Point and a vertical antenna horizontally to get the best range of coverage. I don't know if this is the best option, because it changes the polarization of the antenna, such antennas must always be placed ve