need help with connection IntelPROset utility / wireless

Similar Questions

• NB100 - need help with Toshiba Eco Utility to advanced user

  I want to ask the advanced user (knowing regedit, windows services and processes) and Eco Utility installed to help me with Toshiba Eco Utility.

  (1) I need the registry branch where Eco Utility to store preferences.
  (2) screenshot for TecoService services. With params.
  (3) screen capture of process. Looking for TPCMpwr.exe it

  Why I need?
  I have Toshiba NB100 netbook where Toshiba has not released Eco Utility.
  NB200 there, but not for NB100.
  I don't know why... It will work, only I need the registry and services information.

  P.S. If Toshiba engineers will read this post.
  Why Toshiba release Eco Utility for NB100?

  Hi Lrrrr,

  Just a simple question: what installation Eco Utility on your NB100?

  But normally you don't need this utility of Eco. As much I know this tool only changes power settings Windows you can do it yourself too. It s a nice tool where you can reduce the energy consumption in a single click, but you can do it yourself if you create the own power profile or change.

• p6677c: need help to connect 7525 Photosmart wireless desktop

  Hi all

  I would like to sent to print on my printer 7525 jobs. I have this printer for some time and when I tried to use wireless until I couldn't go wireless. I just thought that I would connect it later, then gone usb. I would like to be able to use the fax feature would therefore to get the usb cable.

  I spent many hours trying to get this thing to print from the computer, but I am running out of ideas and need someone to guide me with some good info. I thought that I had bought a new printer but noticed today that this printer has a sticker saying it's renovated factory. This is perhaps why I can't make it work.

  I have performed the Assistant (s) in the computer and the printer, the printer prints the information that make you think it works. The computer I think is correct. Will the message print to spool it print pending, but does not print on this printer.

  If you have any suggestions please let me know what they are. I know best, one is to throw it in the dumpster to trash. I don't plan on it earlier. I can use it on USB.

  Thanks for any help you can provide.

  Hello

  First of all our computer does NOT have wireless card, why you can not connect.

  http://support.HP.com/us-en/product/HP-Pavilion-P6000-desktop-PC-series/4269976/model/4337127/document/c02547556/

  Your machine has taken a mini spare card so you can add a wireless PCIe card to your computer such as similar:

  http://www.scorptec.com.au/product/Networking_-_Wireless/PCI_Express_Cards/44759-TL-WDN4800

  After that, you can connect your computer to your wireless network and run the installation wizard again. At this point, you can simply select convert USB wireless.

  Kind regards.

• Need help with adapters for T60 wireless

  Hello!

  I recently came across a T60 and I need it to be able to 5 GHz Wireless. The wireless current is not.

  I'm not a genius when it comes to wireless cards, where they are and whether or not they are compatible, this is why I come to you! Will you please help me find a wireless adapter which is dual band, so I can connect more than 5 GHz. No price is too high.

  Thank you for your time!

  -Gabriel Ruiz

  Welcome to the forum!

  If you do not use the BIOS modded, search eBay or Google T 42, 0825 , which is Lenovo a/b/g/n card than some T60 delivered with original series.

• OfficeJet 6500, need help to connect to it wirelessly!

  Help! I somehow found like the guy from the 'IT' to my business even though I'm not really a computer guy, I'm just a guy. We have an Office Jet 6500 e709n, and I need two laptops to be able to print to it wireless.

  I have read both of these threads that cover the same subject,

  http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&thread.ID=3366

  http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&thread.ID=3064

  but this still does not work for me. Both the printer and the laptop are connected to the same wireless router. When I try to print, I just get no response from the printer at all and just the document in the queue.

  Another obstacle is that when you run the install disc, I get a message saying "the specified service does not exist as an installed service."

  Oh, I should maybe mention that the printer works fine when the USB is connected.

  Sequip,

  My problem was solved just in the other forum.  It had to do with the netdevicemanager is not loaded on my system.  Check out the following thread and see if that solves your problem.

  http://h30434.www3.HP.com/PSG/board/message?board.ID=install&message.ID=7688&jump=true

• Need help with my LAN adapter wireless and cable.

  After I installed Windows 7 I have experienced the following problem, connected my Acer Aspire 4736z laptop to the internet.

  After a long period of maintenance of the computer to be idle, eg.in standby or hybernation. the adapter LAN and Wifi Adapater is unable to detect. So I have to restart the computer to make it work. I tried updating the driver but it says that the system already has the latest software. but this happens every time the the computer to sleep and wakes up.

  the drivers for the hardware istalled are Atheros AR5B91 Wireless Network adapt and Atheros AR8121/AR8113/AR8114 PCI - E Ethernet Controller and Microsoft Virtual Wifi Miniport Adapter.

  Windows Network Diagnostics

  Problem encountered There might be a problem with the driver for the Wireless N...

  Detected configurecomplete wireless network adapter

  The wireless network adapter problemscompleted

  There might be a problem with the driver for the region...

  Detected configure the cable networkover the wired network adapter card problemscompleted

  Problems found

  <>There might be a problem with the driver for the wireless network connection card Windows could not automatically bind the Protocol IP on the network card stack.

  Detected

  Configure the wireless network adapter Configure the network adapter to communicate with the network. This ensures that the Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) can be used on the network adapter.

  <>There might be a problem with the driver for the connection to the Local network map Windows could not automatically bind the Protocol IP on the network card stack.

  Completed

  Network Diagnostics log file name: E86CD671-170C-42B3-B6F7-7DB88F9B6343. Repair.Admin.3.etl

  The wireless network adapter problems Windows Help and Support can provide more information about the resolution of driver or hardware problems.

  Completed

  Detected

  Set up the wired network adapter Configure the network adapter to communicate with the network. This ensures that the Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) can be used on the network adapter.

  Completed

  Network Diagnostics log file name: BFE9A7EC-918C-4453-B383-C45DEB6332D6. Repair.Admin.0.etl

  The wired network adapter problems Windows Help and Support can provide more information about the resolution of driver or hardware problems.

  the problem is solved, but I did not try anything. It seems he healed it self, can be via windows update something. Thank you guys

• Beginner needs help with Aironet 1131 G Wireless Access Point

  I have a new Cisco Aironet 1131 G wireless access point.  It takes an IP address and I can ping this address.  However, I can't access it via the graphical user interface based on the web or the CLI.  I preformed reset.  Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  I can't access that means? you are not able to go to the CONFIG T of the CLI prompt? and if you are in the same subnet as the AP, are you not able to open to the top of the GUI? If you are not able to then, with the command 'show version' on the AP CLI and see if your image is "RCVKW8". If so you will need to convert the same IOS using the method below.

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1038660

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Need help to connect to the wireless headset

  Hi you guys, I have a 610xt Touchsmart, I just bought wireless beats headphones, I plugged the headset to my PC via bluetooth, so far when I played a song from my PC I can hear the sound is coming from my PC not my wireless headset, can someone help me how to do when I play the songs I hear from my helmet

  Thank you

  Teddy, you should go to control panel / sounds and check to make sure that the audio device is set as default.  It should be the bluetooth headset.

  If your problem is solved, please click "accept as a Solution.

• Need help with connections to ODBC in Adobe LiveCycle

  Hello I have designed a form for my business that uses a database to fill in a few fields in the form. I can't operate properly without acrobat pro is installed. I use using xfa.sourceSet.DataConnection, but like I said it works as with acrobat pro is installed. We don't have acrobat pro on all machines in my company and installation is not an option is there another way to accompish this?

  See this article for what options you have for deploying your form:

  http://assuredynamics.com/index.php/2010/11/using-LiveCycle-Forms-in-Acrobat-and-reader/

• Need help with connecting bookmarks in another PDF file.  I am limited to 10 MB file sile and had to break a 70 MB document.  I must now bind the bookmark pre the attachment.

  

  Hi hunterDJ

  Refer to this document KB link PDF files. Links and attachments in PDF, Adobe Acrobat files.

  Kind regards
  Nicos

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Wireless installation need help with Photosmart c309a Mac OS x 10.6.8

  I lost my hard drive and am now reinstalling my drivers etc. for the HP Photosmart c309a Mac OS x 10.6.8. It will print if I connect via the USB port, but my office is across the room from the printer. At the same time, I was able to print and scan wireless. The last time I had to reinstall I lost the ability to scan wireless, so I think I originally had it network via airport, but used Bluetooth when I reinstalled.

  Now, I can print when connected by USB, but I can't make a wireless setup works. When I try to print it says I am offline, and when I try to connect it says I am connected via the URL: usb://HP/Photosmart%20C309a%20series?serial= [my serial number here shows].

  I am connected to Internet via WiFi to the installation service. I can also connect through our Verizon MiFi. I would like the ability to scan and print, but if I am limited to Bluetooth and print only, I would appreciate help with this setup as wireless printing is the most important.

  Oh, the manual shows how to configure a Windows wireless system in both directions, but I do not use Windows. Thank you for all you can offer instructions.

  AHG,

  This guide should guide you through the installation process and get you up and running wireless. Let us know if this helps: http://goo.gl/c2IXf

  Good luck!

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with the settings of the firewall for Firefox

  My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

  Hi Tara,

  You can check the link and follow the steps and check if this may help;

  Configure the firewall so that Firefox can access the Internet

  http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

  Is has problems, I suggest you to contact the Mozilla Firefox support,.

  http://support.Mozilla.org/en-us/products/Firefox

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.