Need help with EEM applet 'info type snmp oid' and 'Add' the syntax of commands
I am trying sample and adding a number of OIDs in the mib/ISDN on 2431 & 2921 boxes. The number of T1s on the boxes can vary with the model and configuration of the box. I studied the OID I want to loop through and am sure those to whom I need to try, but I can't build the digital oid using the command 'Add' and get the SNMP get command use the result. Here is my test cmdlet:
config t
No test event manager applet
applet Test Event manager
event no
Info action 200 type snmp oid 1.3.6.1.2.1.10.20.1.3.1.0 get-exact type! isdnSignalingGetIndex
game action 202 j "$_info_snmp_value".
game action 203 I '1 '.
game action 204 k '2 '.
206 action value calls '0 '.
action 210 all $i lt $j! Browse the ISDN interfaces
action 215 all 4 $k! Browse calls in & stats connectes.2 &.4
game action 220 myoides "1.3.6.1.2.1.10.20.1.3.3.1."
action 222 Add $myoid ' $k$ I ".
Info action 223 type snmp oid get exact $myoid
action 224 puts "" myoides = $myoid, i = $i, j $j, k = $k, value = snmp oid = $_info_snmp_value ".
action 225 regexp ' [0-9] + "" $_info_snmp_value ".
the 226 if action $_regexp_result eq 1
227 Add $Calls action $_info_snmp_value
game action 228 $Calls "$_result '.
229 action puts 'calls is $Calls. "
230 action ended
action 232 increment k 2
end of the 234 action
action 240 increment i
250 action ended
end
clear all system event handler
test run the event handler
Here is the result when I run the cmdlet:
bctrunks-2431-2 #event man run test
myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 2, 2 = snmp oid value
Calls = 0
myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 4, 2 = snmp oid value
Calls = 0
Here's a snmpwalk on Solaris 10 of the poll server the OID I am trying sample and add
-bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.1.0
SNMPv2 - SMI:transmission.20.1.3.1.0 = INTEGER: 2<---- this="" is="" isdnsignallinggetindex="" which="" is="" 1="" +="" last="" isdn="" port="">---->
-bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.3.1
SNMPv2-SMI::transmission.20.1.3.3.1.1.1 = Counter32 : 10
SNMPv2-SMI::transmission.20.1.3.3.1.2.1 = Counter32 : 10<----- this="" is="" the="" number="" of="" isdn="" outbound="" calls="">----->
SNMPv2-SMI::transmission.20.1.3.3.1.3.1 = Counter32 : 2
SNMPv2-SMI::transmission.20.1.3.3.1.4.1 = Counter32 : 2<------ this="" is="" the="" number="" of="" isdn="" inbound="" calls="">------>
SNMPv2-SMI::transmission.20.1.3.3.1.5.1 = Counter32 : 0
-bash-3, $ 00
In this case, the cmdlet must obtain the OID 1.3.6.1.2.1.10.20.1.3.3.1.2.1 & 1.3.6.1.2.1.10.20.1.3.3.1.4.1 values and add them.
The comand 'append' does not seem to be working properly, as indicated by the value of myoides. The IOS command result search tool for the "add action".
order does not explicitly say where the result of append it is placed, so I guess that the result is placed in the variable 'myoides' in my test applet.
I have successfully used the 'action info exact snmp oid
Let me know if you can help me. Thanks in advance. Add use the variable name not its value. Try this instead: action 222 Add myoides ' k $I ". Tags: Cisco Network NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please. Hi BSRC$, in stock Reinstalling Windows XP to the factory setting would not be the first option. It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3. I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer. How to remove Windows XP Service Pack 3 from your computer http://support.Microsoft.com/kb/950249 Steps to take before you install Windows XP Service Pack 3 need help with my screen has been using mouse and the screen is smaller and smaller need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out. I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get. Thank you, Gina Davis I have He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service. How to add your Hotmail e-mail account to Microsoft Outlook Express If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail. Need help with packaging CS4; activation of 10.10 and 10.11 customers We have a package made by activating the former employee worked in 10.9 OSX clients. Now, we need to rebuild and get the activation job. Our license is provided. Is likely not to be able to do this because of the 'special' required to install OLD programs on the NEW Mac (see below) But to help you, you need these 2 links... Packer links https://forums.adobe.com/thread/1586021 http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan -which means you are trying to use CS6 and earlier at YOUR risk of having problems -You can get CS6 and previous programs to install and run, or you can not (some do, some don't) -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe) Maybe it's a fake because of Mac El Capitan and OLD programs error This information is a MUST to install old programs on Mac El Capitan -You can't get the same error message, but here are some links that CAN help with old programs -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5) -also a TEMPORARY security change https://forums.adobe.com/thread/2039319 -the guardian https://support.apple.com/en-au/HT202491 Need help with Acrobat 11.0.9: weird interface and fails on some computers Hello We use Adobe Acrobat Pro for a few years now and in the world have been very happy with it. Recently, the quality of the product appears to have increased in particular on Mac computers. However we will have problems with the 11.0.9 update that just happened recently: (1) on some computers Windows, the interface on the right is much more that should be and a new tab called "Fill and sign" was introduced. We are concerned it was a malware until we read the release notes. Is it really normal? The interface is very large and strange. Is there a way we can remove it? (2) also once the new module for recent files is activated, we do experience Acrobat 11.0.9 is frozen for a few seconds and on Mac laptops, we noticed that energy consumption is back while he had good improvement for the last few editions. We have mobile lawyers who use Acrobat intensively on Mac laptops and battery life is important to them. They can just turn off the feature, fortunately, but then the new motive is unnecessary and we love the normal behavior of best. Thanks for any help! We have about 30 computers with Acrobat Pro on them, Mac and Windows, and about a third of them have at least one of these problems. Kind regards Jean Yes, it's normal. You can close or disable entirely. You should be able to disable it via the following entry in an administrator created the "com.adobe.Acrobat.Pro.plist" file in the FeatureLockdown section. The file is placed in the Preferences directory, and should apply to all users. Here's the ETK documentation on this point: bEnableFillSig Add to GPOSupported on WindowsSupported on MacSupported by Adobe Reader Top > FeatureLockdown > Services (eSign-EchoSign) > bEnableFillSig Boolean data type: DWORD value > REG_DWORD By default 1 Version # 10.1.2<> Lock the path HKLM\SOFTWARE\Policies\Adobe\ (product name)-\FeatureLockdown\cServices (version) Summary Specifies whether to remove the Panel now sign the sign pane. The Sign Now details panel allows you to sign with a typewritten signature and a scanned image of your signature. This method requires no certificates or the use of a service online. Possible values are: 0: do not display the Panel sign now. 1 or null: post the sign Panel now. GUI mapping sign > sign Panel now To article #2, I don't know what you mean. New module? Can you screenshot it and post it? I tried about 4-5 other solutions to this problem, but none of them work yet. I installed the Windows program to copy (Cloud Computing service) and used for a few months. I uninstalled it and then a week or two ago. Now I want to reinstall it, but I get the above error message. I am running Windows 7 64 bit. All solutions? I tried about 4-5 other solutions to this problem, but none of them work yet. I installed the Windows program to copy (Cloud Computing service) and used for a few months. I uninstalled it and then a week or two ago. Now I want to reinstall it, but I get the above error message. I am running Windows 7 64 bit. All solutions? Hello You must go to the Copy.com website, sign in with your credentials and access the support options. They should be able to advise how to reinstall the product. Concerning Need help with a query of type "connect by level. Hello, I recently met 'connect by level' and I think he can solve my problem, but maybe not. I would like to create rows of data where the number of rows created varies according to the data from the original table. It works: with times like (select to_date (' 26/01/2014 01:00 ',' dd/mm/yyyy hh24:mi:ss') starttime,) TO_DATE (' 27/01/2014 00:00:00 ',' dd/mm/yyyy hh24:mi:ss') stoptime the double) Select starttime, stoptime, starttime + rownum / 24 of the time connect by level < =. (Select trunc ((stoptime-starttime) * 24: 2) at the time) I would like to do something similar for several lines (following does not work) with times like (select to_date (' 26/01/2014 01:00 ',' dd/mm/yyyy hh24:mi:ss') starttime,) TO_DATE (' 27/01/2014 00:00:00 ',' dd/mm/yyyy hh24:mi:ss') stoptime of the double Union Select to_date (' 25/01/2014 18:00 ',' dd/mm/yyyy hh24:mi:ss') starttime. TO_DATE (' 27/01/2014 00:00:00 ',' dd/mm/yyyy hh24:mi:ss') stoptime the double) Select starttime, stoptime, starttime + rownum / 24 of the time connect by level < =. (Select trunc ((stoptime-starttime) * 24: 2) at the time) I need to stay away from solutions of PL/SQL, this query will be wrapped in an application that can not handle the PL/SQL, going and coming from the database (I also suck in PL/SQL). Any help would be greatly appreciated, I have no knowledge here, I tried to read some of the documentation on hierarchical queries, but it is not yet clicking. Thank you! Or also: SQL > WITH times 2 ALSO (SELECT TO_DATE (' 01:00 26/01/2014 ', "hh24:mi:ss dd/mm/yyyy") Starttime) 3, TO_DATE (' 01/26/2014 03:00 ', 'hh24:mi:ss dd/mm/yyyy') Stoptime 4 FROM TWO 5 UNION 6 SELECT TO_DATE (' 25/01/2014 18:00 ', "hh24:mi:ss mm/dd/yyyy") Starttime 7, TO_DATE (' 25/01/2014 22:00 ', 'hh24:mi:ss dd/mm/yyyy') Stoptime 8 DOUBLE) 9. SELECT T.*, Starttime + Lvl / 24 10. OF time T 11, (SELECT LEVEL Lvl THE DOUBLE 12 13 CONNECT BY LEVEL<> 14 (SELECT MAX (TRUNC ((Stoptime-Starttime) * 24))) 15 AT the time)): 16. WHERE the lvl<= trunc="" (="" (stoptime="" -="" starttime)="" *="">=> 17 ORDER 1, 3 18. STARTTIME STOPTIME-STARTTIME + LVL/24 ----------------------------- ----------------------------- ----------------------------- January 25, 2014 18:00 January 25, 2014 22:00 January 25, 2014 19:00 January 25, 2014 18:00 January 25, 2014 22:00 January 25, 2014 20:00 January 25, 2014 18:00 January 25, 2014 22:00 January 25, 2014 21:00 January 25, 2014 18:00 January 25, 2014 22:00 January 25, 2014 22:00 26 January 2014 01:00 26 January 2014 03:00 January 26, 2014 02:00
26 January 2014 01:00 26 January 2014 03:00 January 26, 2014 03:00 6 selected lines. The IP address on the printer displays as 000.000.000.000 I figured out how to change it, but I don't know what to take. Should I update the network mask and gateway too? I really want to get this working. Don't want to have to buy a new printer. Thanks in advance for any help Hello 0.0.0.0 means the printer disconnected from the network... Any change of the IP address will not apply as long as the printer is disconnected. First of all, try to restart the printer so the router and check any change. Try to plug the ethernet cable into another port on your router, then check any chamge (most probably you will see 4 ports listed as 1-4). If there is no change yet, try to replace the ethernet cable and check any change. If there is still no change, try to plug the etehrnet directly from the printer to one of your PC - if the printer will connect in this way, it means that there is something wrong with your router. If the same by both direct connection, this means that the printer ethernet card is defective and you need to service the printer. Need help with this Vertical field Manager? It scrolls to the low n! I created a vertical field Manager I added to my screen, then I added fields in addition to this. It works fine, but the Manager starts to scroll down when the focus is on the last field and I'm trying to scroll down. He does not stop to the last topic. How can I fix? Take a look at this thread. It addresses exactly your problem with solution: I need help for my DCR-TRV280 appear on WIn7 and save the tape (do not have the disc) I tried to download the PMB software, but I have no disk so it won't let me do anything. The site says the software will already be on my computer for viewing, but nothing happens when I plug the mini-usb cable. Windows Movie Maker not getting anything either. Again, the camera I have is a Sony Handycam DCR-TRV280 Hi gymjunkie, The DCR-TRV280 Camcorder will not support USB streaming. You can connect the camcorder to the Windows 7 computer using the FireWire cable or supplied A / V cable. USB streaming is only compatible with Windows XP computer. For A / V transfer see the link below. https://us.en.KB.Sony.com/app/answers/detail/A_ID/37892 See the link below for FireWire transfer. https://us.en.KB.Sony.com/app/answers/detail/A_ID/37893 Kind regards Jeevan Hi, I need help with my flash mp3 player Hi, I need help with my mp3 player, I wan't to add the pause button... Can you help me? I created the button I added btn_pause and it won't work. function soundStatus() {} var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded () / _root.sound_mc.sound_obj.getBytesTotal (); _root. Loader.loadBar._width = amountLoaded * 260; duration = _root.sound_mc.sound_obj.duration; position = _root.sound_mc.sound_obj.position; _root.playHead._x = position / duration * 272 + 5; } btn_play.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; This._parent.sound_mc.songStarter (songfile [song_nr]); }; btn_pause.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; This._parent.sound_mc.sound_obj.pause (); }; btn_stop.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; This._parent.sound_mc.sound_obj. Stop(); }; btn_fw.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; (song_nr == songfile.length - 1)? _Global.song_nr = 0: _global.song_nr ++; _root.sound_mc.songStarter (songfile [song_nr]); }; btn_rev.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; (song_nr == 0)? _Global.song_nr = songfile. Length-1:-_global.song_nr; _root.sound_mc.songStarter (songfile [song_nr]); }; < proposed by the mod to as3 - kglad > : function soundStatus() {} var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded () / _root.sound_mc.sound_obj.getBytesTotal (); _root. Loader.loadBar._width = amountLoaded * 260; duration = _root.sound_mc.sound_obj.duration; position = _root.sound_mc.sound_obj.position; _root.playHead._x = position / duration * 272 + 5; } btn_play.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; This._parent.sound_mc.songStarter (songfile [song_nr]); }; btn_pause.onRelease = function() {} clearInterval (timeInterval); you must re - set interval when the unpause button is clicked _root.timeDisplay_txt. Text = "00:00 / 00:00 '; This._parent.sound_mc.sound_obj. Stop() }; {btn_unpause.onRelease = Function ()} This._parent.sound_mc.sound_obj. Start(position/1000); } btn_stop.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; This._parent.sound_mc.sound_obj. Stop(); }; btn_fw.onRelease = function() {} clearInterval (timeInterval); _root.timeDisplay_txt. Text = "00:00 / 00:00 '; (song_nr == songfile.length - 1)? _Global.song_nr = 0: _global.song_nr ++; _root.sound_mc.songStarter (songfile [song_nr]); }; btn_rev.onRelease = function() {} clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 '; (song_nr == 0)? _Global.song_nr = songfile. Length-1:-_global.song_nr; _root.sound_mc.songStarter (songfile [song_nr]); }; Need help with Activation after upgrading to Vista Separated from this thread. Hi Gerry, I need help to reactivate. I lost my case and if the product key. I have upgraded from Vista pre-installed on my desktop HP for Windows 7 Professional 2 years back and recently meet with problems and my reason for re-setup. Please find the details below you requested. Diagnostic report (1.9.0027.0): Validation code: 50 Given Vista WgaER--> Windows XP Notifications data--> OGA Notifications data--> OGA data--> Data browser--> Analysis of file data--> Other data--> Content Spsys.log: 0 x 80070002 License data--> Name: Windows 7 Professional edition
Windows Activation Technologies--> --> HWID data Activation 1.0 data OEM--> Activation 2.0 data OEM--> You use the default key that cannot be used to activate Windows 7. You must enter your product key Windows 7 Professional. Try the Activate by phone: Have you tried to restart by phone? How to activate Windows 7 manually (activate by phone) Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files. I want to thank all in advance for your answers. Nelson Santiago Hi NELSONSANTIAGO, 1. when exactly you receive the error message? 2. is the Belkin easy transfer cable recognized by the Windows XP computer? This file may be located on the Belkin Easy Transfer Cable installation disc. For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps. How can I get ahold of a LIVE person? I need HELP with my email account (* address email is removed from the privacy *) you can contact me to the * address email is removed from the privacy * or * remove * please someone HELP! Mike Golab E-mail address is removed from the privacy *. I keep getting more charged in Apple TV,. Recently, I joined Netflix, initially, I was charged 0.99 dollar then actual membership fees $7,99 and later an extra $ 5. I contacted my Bank and they said Apple purchase as received and has nothing to do with the Bank. I don't want to cancel my mem Portege R600: try to get the external Radeon HD4650 graphics to work I have a Portege R600 with an ExpressCard interface and I'm trying to get this working with a Radeon HD4650 through a NetStor Turbobox without success It is impossible to detail more that I thought that the language is inappropriate, but everything I How can I fix error message "object reference is not set to an instance of an object" when I open HP Support Assistant? Lardis Satellite U400 - recovery disk is maybe corrupted Hi all I have my Satellite U400, I created the recovery DVDs and I used two or three times to restore my system. But now, I've tried but always failed during installation, I think that some of the restore files are corrupted and cannot be coppied to Why NI Update Service does not remove the unnecessary files after completing? Whenever NI Update Service is updated software he created a National Instruments\Installers directory with the download to extract. Maybe it's several hundred megabytes. AfSimilar Questions
http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c
public class BGManager extends VerticalFieldManager{
public BGManager() {
super(VerticalFieldManager.USE_ALL_WIDTH|USE_ALL_HEIGHT);
}
public void paint(Graphics graphics)
{
graphics.setBackgroundColor(Color.BLACK);
graphics.clear();
super.paint(graphics);
}
}
-----------------------------------------
Validation of Windows data-->
Code of Validation caching online: 0x0
Windows product key: *-* - CM74G - RPHKF-PW487
Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
Windows product ID: 00371-177-0000061-85643
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {E9827CAB-B22C-4676-8C2F-F77EDCD000E6} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_rtm.101119 - 1850
TTS error:
Validation of diagnosis:
Resolution state: n/a
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Office details:
The software licensing service version: 6.1.7601.17514
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-177-000006-00-1033-7601.0000-2262016
Installation ID: 002356937435887266876642539776934946293206562961099182
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PW487
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 3
Time to trust: 13/08/2016 23:04:17
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Current Hash HWID: LgAAAAEAAgABAAEAAAACAAAAAQABAAEAJJR687d2wBKqdswpOrBWvv + i8gkqhQ is
N/A
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
SLIC SLIC-CPC HPQOEM
SSDT PmRef CpuPm
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
http://answers.Microsoft.com/en-us/protect/wiki/protect_other-protect_scanning/is-that-call-from-Microsoft-a-scam/6718e389-8a00-4E4B-ACA1-d07298ea4c19
Scams by e-mail or web: how to protect yourself
http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
It's a real call from Microsoft?
http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft
Avoid scams to phone for tech support
http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx
Do not fall for phony phone technical support
http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx
Aggressive, persistent Windows tech support fraudsters continue to track consumers
http://www.Computerworld.com/s/article/9248122/Aggressive_persistent_Windows_tech_support_scammers_continue_to_stalk_consumers
What is a certified Microsoft [or] partner?
http://securitygarden.blogspot.com/2011/09/Microsoft-removes-Gold-Certified.html
Maybe you are looking for