need help with error # 800704db (10 istall windows problem)
can anyone help?
Start by resetting your Windows Update components:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
Alternatively, you can perform the upgrade manually:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
Tags: Windows
Similar Questions
-
Need help with error code 0 x 80070424 and 0x6D9
I need help please! Spent an entire day trying to figure this even ONCE! When I try to change my windows firewall settings I get error code 0 x 80070424. I worked at it so long, I forgot when I get the error 0x6D9 code. But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all. I even checked to make sure that the downloads are enabled in my internet settings.
Any help would be GREATLY appreciated!
Hi LindaL5299,
I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right! I hope that I am sharing will help you!
Have you seen this particular thread? (if you have, my apologies.)
MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."
If this isn't the case, you can check it out.
Watch more precisely for the reply by VIJAY B.
As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!
I have summarized his answer for you here.
METHOD 1:
If you have installed, UNINSTALL McAfee Firewall;
AND
T urn WINDOWS firewall "'WE ' "
To ensure that Firewall service Windows is activated:
1. Click on: Start
2 (in the search box) type: service3. Select: services
4 right-click right on: Windows Firewall service5. Click: Stop
6 right-click AGAIN on: Windows Firewall service
7. Click: START
METHOD 2:
Online virus scanner by using the Microsoft Safety Scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxMETHOD 3:
Try to install the latest updates from Windows Updates
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updatesMETHOD 4:
Run it Microsoft FixIt! tool (in the following article to see if that helps)
Diagnose and automatically fix problems of Windows Firewall service
http://support.Microsoft.com/mats/windows_firewall_diagnostic/
*************************************************************************************************************
Keep this site in your 'Favorites', too!
WINDOWS SEVEN FORUMS An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)
*************************************************************************************************************
Hope ONE of these methods is right for you, Linda! I DO "feel your pain!
As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC! I spent many an hour (s) search on the error codes and try to find fixes. So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!
FINGERS CROSSED!
WendeeMcCee
"The he Miss Fix - It [If I can!] ". "
Empathetic to the woes to find fixes for those darn "error codes".
I hope I can help IF I can, but
I not an 'IT' pro!
-
Need help with as3 for pop-up window
I'm nearing the end of the semester in my Flash Animation class. I learned things very simple AS3, extracted etc. code. I'll try to find the actionscript code to encode a simple popup window, but have not found a clue.
Here's what I want to do... I have a white box with a certain guy on the stage. When a person clicks on the white box, I want a popup to open which is larger, which contains the same type but bigger. This box will have an x, so it may be rejected. I don't want to do it in html, only in Flash CS5. I don't want a browser window, I want just a larger version of the smaller area. I know how to build the two boxes, do not know how to write the code. I know there will be a click on the mouse event listener, and then I'm lost.
Can someone help with the code that I could use? It would be most appreciated.
It would be something along the lines of... (using the names of instance from your description)...
Popup.Visible = false;
whiteBox.addEventListener (MouseEvent.CLICK, showPopup);
function showPopup(evt:MouseEvent):void {}
Popup.Visible = true;
}
popup.popupX.addEventListener (MouseEvent.CLICK, hidePopup);
function hidePopup(evt:MouseEvent):void {}
Popup.Visible = false;
}
-
need help with error in Update window
error 80096001 that is the message I get I can't update
Hi SejB,
Welcome to the Forum of answers Windows Vista.
This problem may occur if one or more of the following conditions are met:- Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
- Cryptographic services is set to disabled.
- Other Windows files are corrupted or missing.
- The timestamp signature or the certificate cannot be verified, or is incorrect.
- The hidden attribute is set to the folder %windir%, or one of its subfolders.
To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.
Method 1: Rename the Edb.log file
Rename the Edb.log file, and then try to install the program again. To rename the Edb.log file, follow these steps:- Click Start, click run, type cmd in the Open box, and then OK.
Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.
- At the command prompt, type the following command and press ENTER:
Ren %systemroot%\system32\catroot2\Edb.log *.tst
Method 2: Set Cryptographic on auto Services
Define Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:
- Start the Administrative Tools utility in control Panel.
- Double-click Services.
- Click Cryptographic Services, and then click Properties.
- Click Automatic for Startup type, and then click Start.
Method 3: Reregister DLL files that are associated with Cryptographic Services
To register .dll files that are associated with Cryptographic Services, follow these steps:- Click Start, click run, type cmd in the Open box, and then OK.
Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.
- At the command prompt, type the following commands and press ENTER after each command:
regsvr32 /u softpub.dll
regsvr32 /u wintrust.dll
regsvr32 /u initpki.dll
regsvr32 /u dssenh.dll
regsvr32 /u rsaenh.dll
regsvr32 /u gpkcsp.dll
regsvr32 /u sccbase.dll
regsvr32 /u slbcsp.dll
regsvr32 /u mssip32.dll
regsvr32 /u cryptdlg.dll
outputNote If you are prompted, click OK .
Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
- Restart your computer.
- Click Start, click run, type cmd in the Open box, and then click OK.
- At the command prompt, type the following commands and press ENTER after each command:
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 mssip32.dll
regsvr32 cryptdlg.dll
outputNote If you are prompted, click OK .
Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
- Restart the computer.
Method 4: Remove the hidden %windir%\System32 and its subfolders attribute
- Click Start, click run, type cmd in the Open box, and then OK.
Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.
- At the command prompt, type the following commands, pressing ENTER after each line:
- Click Start, click run, type regedit, and then click OK.
Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.
- Locate and then click the following key in the registry:
- Right-click on the Policy binary value, and then click change.
- The value data will appear in the following format:
- Click OK, and then quit the registry editor.
- Remove all tmp*.cat of the following folders:
systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
- Delete all the kb*.cat files in the following folders:
- Remove all the oem *. * files in the % systemroot %\inf folder.
- At the command prompt, type the following commands. Press ENTER after each command.
- Restart the installation of the patch failed or the installation of the service pack.
- Click Start, click run, type services.msc and click OK.
Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.
- In the Services (Local) pane, click automatic updates, and then click stop.
- Reduce the Services (local) window.
- Select all the contents of the Windows distribution folder, and then delete them.
Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.
- Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
- In the Services (Local) pane, click automatic updates, and then click Start.
- Restart the computer, and then run Windows Update again.
-
Need help with the product key of window 8
So my phone got wet by the rain and, fortunately, only my internal hard drive has been damaged. I went to the mall to buy a new hard drive and had it fixed by a pc repairman. However, they told me that I have to reinstall my windows and says that they can install a pirated copy of windows 8 (I bought my laptop with a pre-installed windows 8 in there), which I have allowed because of my urgent need for the laptop and the lack of money to buy a new installer. At first, I thought that my problem has been resolved and I can reuse the laptop. However, after a few days of use, windows crashes always with an error code driver_power_state_failure and don't constantly back running after a few minutes. So, I thought that what I have to do is to find my product key 8 original windows and reinstall windows 8. Someone told me that I can still install it by using the product key in my motherboard
My question is how I'll be able to restore / reinstall windows 8 by using the original product key? And is it possible to recover the product key?
PS: when it has been damaged by the rain, I've had my laptop checked by some computer know-how and told me that only the hard drive has been damaged and all the other parts still work fine. Once it was repaired, I was able to usevit again for a few days until the crash/restart happened.
This error is not caused by the missing key, but because you have a pirated copy of the operating system, we can not help you.
-
Need help with a DMP file. Windows XP
Hello guys!
Need your help impeccable with a dmp file? What is the problem causing blue screen?http://data.fuskbugg.se/skalman02/4e04ed908a06f_Mini122210-01.dmp (latest version)Thank you for the kind help!Hello Molphyr,
The first discharge seems to have been caused by viahduaa.sys and it should be updated. My comments on the discharge are in bold:
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
100000 1 error checking, {a824a000, 2, 0, acc5e0d8}
Probably caused by: viahduaa.sys (viahduaa + 280d 8)<-- debugger="" suspects="" this="">-->
Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If the kernel debugger is available, get a stack backtrace.
Arguments:
Arg1: a824a000, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: acc5e0d8, address memoryDebugging information:
------------------READ_ADDRESS: a824a000
CURRENT_IRQL: 2
FAULTING_IP:
viahduaa + 280d 8
acc5e0d8 3b0f cmp ecx, dword ptr [edi]CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0XD1
LAST_CONTROL_TRANSFER: from acc6134c to acc5e0d8
STACK_TEXT:
WARNING: Information not available stack unwind. Sequence of images may be wrong.
acc6134c 80551384 a8249fe0 00000020 a8249fe0 viahduaa + 0x280d8<---driver is="" at="" top="" of="">---driver>
805513a 8 acd8d676 847bcd58 a8249fe0 a9abcc80 viahduaa + 0x2b34c
805513d 0 80551401 00000020 80551400 portcls acd8d945! CPortPinWaveCyclic::Copy + 0 x 56
80551410 acd877bf 00024fa0 8055c0c0 ffdff000 portcls! CPortPinWaveCyclic::RequestService + 0 x 298
80551428 80545ebf 847 4238 4228 portcls 00000000 847c c! CServiceGroup::ServiceDpc + 0x2a
8055be60 80551440 ffdffc50 00000000 8055be60 nt! KiRetireDpcList + 0x61
80545da4 80551450 0000000e 00000000 00000000 nt! KiIdleThread0
80551454 00000000 0000000e 00000000 00000000 nt! KiIdleLoop + 0 x 28STACK_COMMAND: kb
FOLLOWUP_IP:
viahduaa + 280d 8
acc5e0d8 3b0f cmp ecx, dword ptr [edi]SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: viahduaa + 280d 8
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: viahduaa
Nom_image: viahduaa.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a24e854
FAILURE_BUCKET_ID: 0xD1_viahduaa + 280d 8
BUCKET_ID: 0xD1_viahduaa + 280d 8
Follow-up: MachineOwner
---------0: kd > lmvm viahduaa
start end module name
acc36000 acd85900 viahduaa T (no symbol)
Loaded symbol image file: viahduaa.sys
Image path: viahduaa.sys
Image name: viahduaa.sys
Timestamp: Kills Jun 02 03:52:36 2009 (4A24E854)<--- driver="" from="" 2009-="" should="" be="">--->
CheckSum: 00156D7B
ImageSize: 0014F900
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4Let us know if you have any questions.
Best regards
Matthew_Ha
-
Need help with Error #1009
Hello, I am working on a Flash game where you navigate in different rooms. Each room is located in a frame on the main timeline. I get an error message #1009 when I navigate to certain parts, but each image almost the same code, so I don't know why some executives encounter this problem while others are very well. When the error message that I am always directed to the 'room' I clicked on, but all the buttons in this room disappear and you are then stuck there and having to restart the project. I looked through other forums where people had this error message similar but I could not find a solution that could help me, so I apologize for the display of such a common problem! Here is a screenshot of the error message I get, which says:
TypeError: Error #1009: cannot access a property or method of a null object reference.
at project1_fla::MainTimeline/frame4() [project1_fla. MainTimeline::frame4:43]
at flash.display::MovieClip/gotoAndStop()
at project1_fla::MainTimeline/enterElevator3() [project1_fla. MainTimeline::frame12:25]
Here are links to the screenshots of the debugging session where it points to the lines of code that contains the error and also screenshots of my code in these pictures:
Frame 4 is labeled as 'elevator' and armature 12 is "medEntrance". I know that the problem is to jump from an image to the image, but I honestly have no idea what would be the error. I double checked all my code and it must be correct, and what makes it even more confusing, is that some rooms work perfectly while others have this problem and they all use the exact code, but with different names of MC! :/ Something I noticed is that the rooms which are most often linked to (for example that the lift can bind to three different "floors" or frames) are those who encounter this problem. But I chose this pair in particular because it contains the least amount of code I do not understand why have several frames, a link to a picture in particular would be a problem, but it's my first time using Flash and AS3 so I don't know any with its limits.
Sorry for the overload of code and messy information! I thought it's better to provide too much information than too little and thanks for your help, it is much appreciated!
rather than distributing your rooms in different key frames,
Move them to separate the layers
and use only the first image of each layer
then do what amy suggested and is wirtie a document class that will have all your key code in
or put all your code on the first frame of the first layer (separate layers where you have your rooms on)
So, it becomes available for all your parts.
To hide rooms you don't currently need put all the parts inside a table:
var rooms: Array = [room1 room2... room100];
then write a function
function showRoom(_index:int):void {}
for (var i: int = 0; i<>
{if(i==_index)}
rooms [i] .visible = true;
}
else {}
rooms [i] .visible = false;
}
}
}
for example, when you move to the next room call sth. as
showRoom (4);
This will hide all parts in addition to the 5th
-
Hello
I just finished properly the local folder, tesing server and remote server configuration (I think).
My test configuration and the files listed below:
My local folder for the site indicated below:
My Advanced below settings:
I downloaded all the files in the local folder to my remote server running properly on the website online http://www.caremoreconstruction.co.UK .
No layout of the files/folders etc. have been changed, I have just moved from the FTP server in local folder I had created.
Just to confirm that I have installed XAMPP and Apache runnining.
When I open DW CS5 and choose the form of index.php file tab FILES of the main home page opens and I little bar appears at the top and says "this server directives proccesing design mode page cannot display. Switch to Live View'.
If I click on Live View and load the home page. I can press ctrl and click one of the links. (See image below)
For some reason, I get the following error message when I click on my links.
_________________________________________________________________________________________ _____________________________
Object not found!
The requested URL was not found on this server. The link on the referring page seems to be wrong or outdated. Please inform the author of this page on the error.
If you think that it is a server error, please contact thewebmaster.
404 error
localhost
12/30/10 11:58:51
Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1
__________________________________________________________________________________________ _________Please can someone help me!
Concerning
James
Mr Construction wrote:
I'm having a problem with the URL when tring to access XAMPP
http://localhost/xampp (I get a 404 error)
http://localhost/ (I get error 403)
It seems that you have screwed up to the XAMPP installation when you moved it.
As you all barely in place, the simplest way of handling is to reinstall. I assume that you have all the data stored in MySQL. If you have and I don't want to lose it, you will first need to export it.
- Stop Apache and MySQL.
- Save httpd-conf and httpd - vhosts.conf on your desktop.
- Delete C:\xampp and everything inside it.
- Install a new version of XAMPP.
- Make sure that it works.
- Replace the httpd-conf and httpd - vhosts.conf with versions that you saved on your desktop.
- Restart Apache.
- Enjoy.
-
Need help with error code "WindowsUpdate_00000646".
can anyone help?
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search at the above link > download them manually.
If this does not solve it:
Windows Update Forum:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Need help with the formatting and reinstalling windows
Hi, I have a Compaq Presario C700 p/n GR598EA #ABU I got to work about 3 years ago.
Recently, it does not load windows, even in safe mode and I can't get back either.
I used a disc to boot from linux to access and backup of all my important files and now I want to reformat the hard drive, resintall windows and start over (or try something else which will fix it)
The laptop has been pre-installed with Windows Vista and HP stuff had already installed on it. I don't have a Windows disc or discs of driver with the laptop.
How can I format and reinstall windows and drivers, if I don't have records?
Help, please.
Thank you.
Hello:
You can order a Vista recovery disk set for your laptop if they are still available. See the instructions below:
http://support.HP.com/US-en/document/c00810334=
If you live not in the US or the Canada, you can contact HP Support worldwide for the country you live and ask recovery disks command to your laptop
The link to the assistance of HP WW is below:
http://welcome.HP.com/country/us/en/wwcontact_us.html
Paul
-
I tried about 4-5 other solutions to this problem, but none of them work yet.
I installed the Windows program to copy (Cloud Computing service) and used for a few months. I uninstalled it and then a week or two ago. Now I want to reinstall it, but I get the above error message. I am running Windows 7 64 bit. All solutions?
I tried about 4-5 other solutions to this problem, but none of them work yet.
I installed the Windows program to copy (Cloud Computing service) and used for a few months. I uninstalled it and then a week or two ago. Now I want to reinstall it, but I get the above error message. I am running Windows 7 64 bit. All solutions?
Hello
You must go to the Copy.com website, sign in with your credentials and access the support options.
They should be able to advise how to reinstall the product.
Concerning
-
When I try to open internet explore or other applications on my computer crashes upward. It comes to getting the error message:
the exception unknown software exception (0xe0434352 occurred in the application at location 0x00007FFDC385A1C8
Please help thanks.
Hello
We are here to help.
To resolve the problem you are experiencing, follow these troubleshooting steps:
Perform a clean boot to verify if a third party application is causing the problem. For more information about how to perform clean boot, check it link.
If the error code persists, it is possible that there is a problem with the application itself. In this case, download and run the Microsoft .NET Framework repair tool. For the repair tool, click onhere.
Let us know how it goes.
Kind regards.
-
Rookie Flash needs help with error messages when you perform a simple calculator in AS3.
I'm doing a simple calculator I followed this guide:
http://www.YouTube.com/watch?v=5k3h37YKZJI
It's my code.
var Hnum:String;
var PCnum:String;
var calc:Number = 25;
var Total: String;
NUM1. Restrict = "0-9";
num2. Restrict = "0-9";
Est_btn.addEventListener (MouseEvent.Click, Calculate);
function calculate(event:MouseEvent):void {}
Hnum = num1.txt;
PCnum = num2.txt;
Total = parseInt (Hnum) * calc;
Total.toString ();
Total_txt. Text = String (Total);
}
I get 3 errors:
Scene 1, Layer 'Actions', frame 1, line 14 1067: constraint implied a value of type flash.text:TextField to a type unrelated to a String. Scene 1, Layer 'Actions', frame 1, line 15 1067: constraint implied a value of type flash.text:TextField to a type unrelated to a String. Scene 1, Layer 'Actions', frame 1, line 16 1067: constraint implied a value of digital type to type String unrelated. I have two areas named num1 and num2 and box input text and dynamic text named Total_txt.
This should be so simple, I don't really know what im doing wrong?
Any help would be really appreciated.
MrB
If you look at the tutorial, I think you will see that you are using "txt" where "text" is needed. 'text' is a property of a textfield, identify the text that contains the textfield object. I don't know if you're doing something where the num1 object contains another object named txt, but I think that my first sentence catches the problem.
-
Need help with a clean install of Windows 8 on Satellie A200-1MD
Hello
I want to install windows 8 on my current model of the laptop A200-1MD, but once I put the cd in the drive and restart the computer, it just does nothing, even when I press on delete. Can someone help please how windows installation 8 menu start?
Thank you very much!
You start from the disc Win 8?
Turn on the device, press F12, and then choose ODD as the boot device and confirm by ENTER.
Now computer laptop should boot from the disk -
Need help with unblocking Port 80 on Windows Server 2003
Web browsing is disabled on a computer that is running Windows Server 2003. I think that Port 80 is the block, but there is no installed firewall or the router it blocks. Using the command IPCONFIG I can ping www.yahoo.com, but I can not connect to www.yahoo.com on the web browser. Backup software remote works very well.
In addition, there is no set of proxy server, everything is automatic "as it should". I have triple checked all the settings with Internet Explorer and Firefox.
Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
attrib s h % windir %
attrib s h %windir%\system32
attrib s h %windir%\system32\catroot2
output
Method 5: Define a signature unmanned silent success strategy
The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).
Method 6: Clear the temporary file and restart the hotfix installation or the service pack installation
To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:
% systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
% systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output
Method 7: Empty the software distribution folder
You can also follow the link below:
You cannot install some programs or updates
http://support.Microsoft.com/?kbid=822798
I hope this helps.
Concerning
Rehman - Microsoft Support
Maybe you are looking for
-
My wife just bought an Apple Ipad3, and she wants to install firefox above to access a work from home program. Is there a way it can install firefox on the 3 Ipad to access this program?
-
Portege Z30-A-1E1 - blue screen and reboot
Hello I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit. I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.In the event log windows that I can't find anything that clearly led to a
-
iPhone 6 sec duration of support and coverage
What does ' is the iPhone 6 s technical assistance by phone and repairs and Service coverage in American purchases?
-
Outpost Antivirus - incompatible program
Hey,. Some time ago I tried to install a free antivirus (Outpost Firewall), published by Agnitum Ltd, it downloaded on my computer very well, but just after it appeared there is a compatibility issue. The message will not go away, and it is very anno
-
HP Laserjet cp1525nw: BlackBerry Passport Printing
Try with BlackBerry Passport Wi - Fi is a challenge that it has no owner application on their system. Several apps are not compatible with the printer. Any thoughts?