Need help with formatting my laptop Satellite M40

Similar Questions

• Need help with installing XP on Satellite P200-IEE

  I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
  My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
  It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.

  HELP Please

  There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
  Some won't take only short xp. (for one, made this mistake on a new laptop!)

  Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...

  Concerning

  Published by: ADMIN

• Need help with installing Win7 on Satellite L70-A-12W

  I bought Satellite L70-A-12W with preinstalled victory 8.1 two days ago... I have no recovery of win7, but I have Win7 64 Bit DVD new.
  I would like to install win 7. I follow the instructions concerning the closing down, on Bios (I have version 1.3) safety boot is disabled and the boot mode is MSC mode.

  I did a recovery on USB media if something with is wrong. Earn 8.1 I installed Paragon Partition Manager 14 (free version) and see the Partition Table. It UriPattern like this:
  1 partition - system - 1-GB NTFS (Partition of Service);
  2. partition (no name) - 100 MB - it's the gray color.
  3 partition (local partition) - 128 MB;
  4 partition C: (win 8.1) - Go 920 - NTFS drive.
  5. partition - recovery - 10.1 GB - NTFS (Partition OEM Service).

  I would like to keep evrything what is, if possible, and instead og Win8.1 install Win 7 ultimate 64-bit (which I have). And after than that, resize this partition of 100 GB and make a second partition private for my data - partition D: - for example.

  I did things in the BIOS and win7 DVD and got error massage: Windows cannot be installed to this disk. The selected disk is of the GPT Style partition...

  I found a solution to clean the disc in the BACK, but I'm not sure that I have with this procedure will delete oll data disc. I'll guarantee loos e if I do this... If all other partitions will remain instead of C--> I can always make backup returns with media recovery with win 8.1 and hopes to keep the warranty.

  Now, I don't know what I have to do...

  I would just have win 7 on my laptop with minimal change to the partition table and all the partitions instead of C (where now is win 8.1).

  Could you please help me...

  Hello

  The question is: why you want to keep the present partitions on the HARD disk.
  Using two systems Win 8 and Win 7 on this laptop?

  The fact is that if you want to use only Windows 7, it s not appropriate to keep the old partitions on the HARD disk.

  Secondly, you already have the Toshiba Recovery flash memory stick.
  This recovery media allows you to return to the factory settings.

  This means that recover the laptop using this memory flash USB stick recovery would again create the same partitions and install the Win 8.1 System.

  Finally and above all Windows 7 supports 4 primary partitions as primary partitions are applicable to the tables of partition MBR and partition table MBR allow four primary partitions.

  After you create the primary partition 4th Windows system will accept only the volumes 'Dynamics' (logical drives). You must create an extended partition containing many logical partitions.

  However, if you use a table of GPT partition that is supported by the 64-bit Windows versions, you can configure up to 128 partitions and you need t differ between "primary" and "extended" partitions

  In addition, the GPT partition table also requires the UEFI BIOS.

  More details here:
  http://support.Microsoft.com/kb/2581408

• Need help with installing Linux on Satellite Pro A300

  Hello

  I would like to install Linux on my laptop and am wondering which is the best distribution I can use and is it simple to follow guide to use so I'll get to the top and running with a dual boot with Microsoft Windows Vista?

  Please help because it is really important to me!

  Appreciate your help in advance.

  Thank you
  Bill.

  Hello

  To be honest I didn't install Linux on my laptop with Vista and XP.
  Sometimes, I use Linux Live distribution called Koppix, and I m satisfied!

  The devices have been recognized, and most of the drivers were included.

  Maybe it s an option for you too

  But Ubuntu might also be interesting for you.

  Check this box:
  http://www.Ubuntu.com/

• Need help with BIOS on my Satellite L40

  Hi all

  guys I have two problems with my BIOS:

  1st. as my portable computer power does not start anything, or nothing works
  (even no sound of the fan or anything like that, no seeing covers but the power, battery covers)
  (it happened before two weeks they said that they have updated the bios)
  (it happens when my laptop is a download online or something and is running out of battery in the two times)

  2nd when it was working I could not adjust the brightness of the screen, or apply the power saving options

  So please tell me if I can reset or update my BIOS in material and how
  I use PSL4CE, Vista operating system.

  null

  > 1. as my portable computer power does not start anything, or nothing works
  (even no sound of the fan or anything like that, no seeing covers but the power, battery covers)
  (it happened before two weeks they said that they have updated the bios)
  (it happens when my laptop is a download online or something and is running out of battery in the two times)

  If I understand this problem started after the BIOS update. Maybe you used a bad BIOS or something went wrong during the BIOS update process.
  But wait; try to remove the battery and the AC adapter. Wait for about 20-30 min. After this short period of time connect the two parts, and try to start Notepad.

  > So please tell me if I can reset or update my BIOS in material and how
  If the accelerated procedure described above help doesn t, then you have some many other opportunities. In case you should contact the ASP in your country and should ask for the BIOS flash may be that you're a lucky guy and the mobo is not too bad!

  Good luck

• Need help with formatting of file

  I created an InDesign file that has a combination of images and text. The text has been pasted from another document, so I used the function of automatic debit. I added photos in mine. Now I need to edit pages in my document, but every time I do the format of pages later gets disturbed (ie. the text moves, but the photos are not). Is there a way to change this for the layout of each page is unchanged, leaving the appropriate text «locked "to the appropriate images?» I use creative Cloud version of Id.

  https://InDesignSecrets.com/make-an-image-flow-with-the-text.php

• Need help with the beep codes, Satellite x 205-SLi1

  Hey guys, a few days ago I tried to turn on my Satellite x 205 SLi1 and I got was 3 beeps, no screen. The first tone is quieter then the next two. What could this be?
  I tried to replace the ram sticks with new and n t work I looked around for answers and I have not seen anything.

  Anyone has any ideas on what could be the problem before I take it a shop?

  I googled for the BIOS error beeps and it seems that the 3 beeps as it means that there may be a problem of graphics. I would like to send the device to an ASP for repair.

• HP pavilion g7-2294NR: need help with my computer laptop refurbished hp g7

  I recently set up my BIOS after upgrade to win 8.1 to win 10 and he recommended that I put in place a "administrator password" and "power on password". What are the differences and how do I get rid of them!
  
  I can not go in the BIOS (Insydh20 3.7) more by pressing ESC and because of this, I can't reboot my OS now because of that, because I ALSO had the BLACK SCREEN OF DEATH! Someone help me please! My passwords are:
  Admin: ($ 0 4r! c @)
  Market: 9 q$ R? g. @.
  When I enter a wrong password I get this code: 67072996
  
  I would REALLY APPRECIATE all your help. Thanks in advance!

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• need help with formatting SD card

  If I format the sd card in my Droid phone will automatically replace the system such as the folder dcim, digital camera and other files?

  Reformatting prepares to essentially any card for use on the droid.  It clears the map and then replace all the system files that are hidden behind and you see, e.g. dcim.  Many apps put also the folders on the card, they will not be replaced before you insert the card and open applications.  The map will look like it did the first day.  Make sure that you format via the phone's settings and not windows, they format it differently and the droid will just reformat.

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389