Need help with installation on Photosmart C7280 all-in-one

Similar Questions

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Photosmart C7280 all-in-One with HP Premium Plus Photo A4 Semi Gloss paper

  For the past two years, I have been using the Photosmart C7280 all-in-one, with Premium Plus Satin A4 Matte Photo paper and have gotten excellent printing results.

  Now that this article is no longer available I just bought some suggested alternative, which is Premium Plus Semi Gloss; but I am surprised and very disappointed by lower printing results.

  Compared to the Matt satin results, they are very much less clear and the colors appear pale and lower.

  Has anyone had similar experiences and, if so, found a solution?

  Hello graham_jester

  It is up to you. In general, the solution is marked when a particular post has solved your problem or an appropriate workaround solution. In any event, I appreciate the gesture.

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• HP Photosmart c7280 all-in - One Mac 10.7.1 (Lion) "Double" option is grayed out and cannot be used?

  I have a HP Photosmart c7280 all-in-One printer and a Macbook Air running OS Lion (10.7.1).

  I'm trying and who need to print via the option "Double" that appears under the menu of "Layout" drop down tab option, the option 'Double' however seem to be grayed out as if you are not allowed to use it.  I'm sure this isn't the case, I don't know how to unlock but I guess?

  I just made sure all my software was updated and is currently.

  Everything is perfect on the printer and I used it for years, thank you!  I just want to know what on earth am I doing wrong or need to do to unlock this "Double-sided" parameter, so that I don't waste a ton of paper!  Thanks again!

  Sincerely,

  DAP413

  Hi DAP413,

  To actiate the two-sided accessory, you have to enable the printer settings:

  -Enter in System Preferences > print & Scan

  -Double-click the name of the Photosmart printer to open the print queue.

  -Click the printer setup button

  -Click on the driver tab and make sure the duplex printing accessory option is checked.

• Photosmart c7280 all-in-one

  Hello

  I recently used XP home on my computer and now install W 7 32-bit

  Can I print the pages dubbelsides in XP but now I can only print 2 pages on a paper dubbelsides when I select print dubbelside.

  I have install the complete software solution from HP website for the HP photosmart C7280 all-in-one device.

  Is there a solution for this problem.

  I want to print each page on one side of paper instead of 2 pages on one side of the paper?

  thakns for the answer.

  

• my printer hp photosmart c7280 all-in-one

  my printer hp photosmart c7280 all-in-one does not stop

  Hello! Welcome to the @Lukewp forums

  I read about how your printer will not turn off. My best advice would be to unplug it from the wall and let it sit unplugged for a minute or two.

  Try turning the power on to the top and see if this is useful, and if you can feed it to the wide by the power button.

  Let me know the results

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• Installation of the elements 11 on Mac. Need help with installation error "Setup wants to make changes.

  Installation of items 11 Mac 10.8.2. Need help with Setup error: installation wants to make changes. Type your password to allow this. "After entering the Adobe password, nothing happens.  Locked for more than installation.  Any ideas?  Phone support Adobe couldn't help.

  Just prior to leaving changes (installation in this case) is done on the Mac OS application password & it must be the password for Mac system. This password is the native guest of the system clean & accept the password only. Please make sure that it's the right password (all/admin rights) and the game should work.

• Hi [need help with installation]

  Hi, I have recently be assigned the task of managing a Web site, I do not have the software on my system and need help to do it. I received a product key, the e-mail and the password, where I go from here

  A good start would be the name of the program you need to install

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Photosmart C7280 all-in-One Wireless does not

  My wireless printing worked great with my Photosmart C7280 at least a year or more and now recently the wireless side no longer works. My Apple (iPad and Macbook) devices has ceased to recognize my printer. Even when I tried to add via IP address, it should not.

  My printer works fine when hard cable through my PC and Macbook via USB.

  I tried to reset the settings of my network to restore default network printer and adding in my SSID and password. It shows that it is connected. But when I run a Test Page wireless network of in the settings of the printer, it shows everything going on and the signal strength is excellent. However, the final diagnosis in the summary says 'No' to "other networks detected matching your network name (SSID)" so I wonder if my printer actually properly connect my network? Since I have other wireless devices connected to the same SSID.

  I turned other devices and the printer off, and then to restart. I turned and turn on the radio wireless settings of the printer.

  Another thing I want to mention is that before I deleted the printers in my Apple devices, they still show my Photosmart 7200 series, but said they were inactive.

  Also when I was able to enter my Verizon FIOS Broadband Router management software via my browser, it showed all my wireless devices, but it also showed my Photosmart as being inactive wireless, where other devices that were on at the time were connected.

  I wonder if it may have been a recent update from Apple that may have caused this problem? However the Verizon Fios also showed the printer as being inactive, so I think not?

  I have worked on this issue for the days and spent a ton of time so far, any suggestions to solve this problem would be greatly appreciated.

  I'm about to intermediate level to understand the technical aspects. So please clarify responses to resolution steps very simply in your response.

  Honestly, the routers ISP-issued are very problematic.  Restart the Westell pulling on her momentarily just power cable before attempting to connect the printer.

• the printer hp photosmart c7280 all-in-one has a need to use with ipad2 airprint capability

  The c7280 printer has feature WiFi 802.11 g.  I have the connection from Verizon Wireless.  Y at - it somehow I can use to do wireless printing from my iPad 2.

  There is! You can use a named application: HP Home & Biz <-- click="" that="" hyperlink="" to="" read="" about="" the="" application.="" you="" can="" download="" it="" directly="" from="" your="" ipad="" in="" the="" apple="" app="" store.="" here="" is="" a="" how="" to="" on="" how="" to="" use="" to="">

  Printing from the Mobile device to printers of non-Web-Enabled (No. AirPrint or ePrint Support)

  I hope this helps! If you have any other questions do not forget to post them. Good luck!!

• Need help with installation Standard design CS6

  Hi all

  Bought standard for download CS6 Design of curries the other day. I have a list of 4 files to download.

  The first is a PDF file to tell me how to activate my student software.

  Second is a file .exe for design standard

  Third is an another .exe to install content illistrator

  Fourth is an another .exe to install indesign and incopy content.

  I donwloaded all 4 files and when I clicked on the two installation programs contained I then click on the .exe file standard design upward, comes this error message "part archive of design adobe cs6 standard file is missing." you need all parts in the same folder in order to extract the adobe cs6 design standards. "Please download all parts.

  As google automatically puts every download in the downloads folder, I guess that I did the right thing and placed them all in the same folder.

  I read that you need to extract a dossier.72 or something. However, I don't see that on my list of downloads.

  Please could someone help, or is this a case of account my laptop curries and requiring a person to help me?

  You should contact your provider to see where is this file 7z.

  BTW, it should not be manually extracted.  the exe will extract the 7z file content.

  or you may be able to download from here, http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html