Need help with keyframes for start and stop an effect

I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.

Tags: Premiere

Similar Questions

  • Need help with query for points and polygons, 2 tables of

    Hi all

    I'm slowly stumbling along trying to figure things out space.

    I have two tables, GEO_POINTS:
    (
    DEP_ID NUMBER (12) NOT NULL,
    LINE NUMBER 4 NOT NULL,.
    MDSYS. POINT_LOC SDO_GEOMETRY
    )

    and POLYGON_AREAS:
    (
    POLY_NAME VARCHAR2 (120 CHAR),
    POLY_DESC VARCHAR2 (120 CHAR),
    MDSYS POLY_POINTS. SDO_GEOMETRY
    )

    Neither table is engraved in stone, if any, I can change some structure.

    I'm trying to understand how to write a query to retrieve all the points in a polygon, perhaps even with an optional buffer provided by the user.

    Conversely, I would probably also need to know what polygons a point would have drawn in, and it's the only request I could make any progress on.

    What I have so far, which is not working properly, is the following:

    Select * from deposits_search where dep_id in)
    SELECT dep_id
    OF geo_points, polygon_areas
    where (sdo_relate)
    poly_points,
    (SELECT point_loc
    OF geo_points
    WHERE dep_id = 10282444),
    ("mask = ANYINTERACT") = "TRUE");

    In the light of the foregoing, I want to select all the lines of a third table (DEPOSITS_SEARCH), for all polygons which is a point. The DEP_ID column is my primary key for most of the data tables in the database, and the number rose in my application query. However, the above returns all rows. It should only return one, because I only have a polygon of test defined so far.

    Any help is greatly appreciated. Thank you

    Bill Ferguson

    in which case you must include a line of buffer for the interaction between the points and polygons (with a stamp),

    better, you use the SDO_WITHIN_DISTANCE operator.

    http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i77653

    Not so sure what you mean with "I always have problems while providing a point location and extract the polygons that point would be plotted in" as so-called before unless you want that as a 'transitional instance of a geometry. (Specified using a variable binding or a builder SDO_GEOMETRY.) »

    http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i78531

    Read what geometry2 means in there. Read the examples and you will see that you have the geometry second in space operator as a builder. If this is what you need.

    Luke

  • Need help with coding for HTML5 with emergency Flash video

    Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

    code.jpg

    Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

    Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.

  • Need help with movie clip display and timer

    I worked on a game in flash for the last couple days and this is my first major game so there was a lot of problems.  For those who have helped so far thanks so much!

    I think that I finally got it with a few exceptions, they are.

    1. the clip that serves as my pop-up window is popping up behind all my mobile icons.  I need over them of course.

    2. I need to find a simple way to stop time while the pop up is in place and to make up the time when she disappears.

    OR

    3. I need to add 5 seconds to the game clock when the user draws a question mark to make it appear as if the clock stopped.

    If someone has an incentive it would be greatly appreciated!  Thanks in advance!

    This is my code of timer clock to date!

    onClipEvent (enterFrame) {}
    If (_root.time == 30) {}
    _root. TECH = 9;
    _root.intervaln = 30;
    }
    If (_root.time == 10) {}
    _root.intervalz = 10;
    }
    If (_root.time == 0) {}
    _root.gotoAndStop (3);
    }
    }

    Kapelski

    1. you should not set any code for an object.  all your code must be attached to frames or in classes.

    2. use swapDepths() to change the depth of a movieclip

    3. There is nothing in your code on a timer.

  • Need help with Exchange 2010 Diag and implementation

    I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

    Hello HectorLopez_790,

    Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
    Click here for a link to transfer your question in the forums of Exchange.

    Thank you

    Marilyn

  • Need help with license for Windows store

    Hello! I have problem with Windows store, he says he has a problem with the license.

    It happened because I tried to upgrade my Windows 8.1 to Windows 10 and I've failed at about 20 times. Servers of M$ have been save this issue but they have not registered my fails so now servers $ M think I use illegal license for my laptop. My laptop is Asus F55A and I can not use the store because M$ servers does not allow me too.

    Please Microsoft something about it.i have legal Windows but probably your servers register this as illegal because I repeatedly upgrading to windows 10 who never worked and your servers did not know my fails.

    Please answer.

    Error with Windows store code "this application failed to start because of a problem with its license. Please try again later.

    Any help will be for me!

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you are facing problems with Windows.

    I suggest you to refer to the suggestions of B Abid replied on 29 October 2012 and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/unable-to-open-Windows-8-store/8a90d67e-9FEE-4B1F-A549-e702d0b207f4

    Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  • Need help with the OSB Assign and replace the

    I have a proxy service that receives the SOAP message:

    " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

    " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

    < / soapenv:Header >

    < soapenv:Body >

    " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

    ...

    < / pidx:OrderChange >

    " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

    ...

    < / DeliveryInformation >

    < / soapenv:Body >

    < / soapenv:Envelope >

    I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

    The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

    I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

    In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

    1. an XQuery query transform to generate the XML SOAP just described

    2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

    I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

    It is the right approach or is their a better way of

    1. create the SOAP wrapped XML

    2. call the Business Service.

    Any suggestions are appreciated. I can provide more detail if necessary.

    Kind regards.

    Thank you Vlad...

    I think I'm getting in that direction now. Just do some debugging.

    Appreciate the input. I will update with final results.

    Again, your help is greatly appreciated.

    Kind regards.

  • Need help with an Export-CSV and ForEach loop

    Hi guys, I'm total NOOB in CLI so please forgive the stupid question.

    I need your expert advice for the very large environment and will award points.

    I have a working script that alerts to our logout ESXi hosts, maintenance and NotResponidng mode

    His job well, but need to send a mail to all three of our VCenters

    Current script only works for a VC at a time. How do I ForEach and always the hose of the same body CSV and HTML

    It would be nice to have an HTML and CSV output that looks like this (assuming that there are currently disconnected etc.)

    I have a set of credentials, that work on all 3 of my VC

    VC1

    Host1 disconnected

    Host2 NotResponding

    VC2

    Host3 disconnected

    Host4 NotResponding

    VC3

    No disconnected/maintemance/notresponding hosts for VC3

    Here is my current code, etc. of the hidden passwords >

    # Clear old sessions
    Disconnect VIServer VC01-confirm: $false

    # VC01 VC check for disconnection and Maintenance mode and does not
    SE connect-VIServer-Server VC01 - FakeUSer username-password FakePassword

    $Report = get-VMhost-State disconnected, maintenance, NotResponding | SELECT name, connectionstate

    # scan info to be html and give him a date stamp

    $ReportHtml = $report | ConvertTo-Html | Out-string

    # Write CSV file and give it a character of data

    $filePath = "C:\PS\Output".
    $filename = "VC01disconnectedHosts".
    $CurrentDate = get-Date
    $CurrentDate = $CurrentDate.ToString ('MM-dd-yyyy_hh-mm-ss')

    $Report | Export-Csv "C:\PS\Output\VC_$Currentdate.csv".

    # Send the info by Mail

    Send-MailMessage-to [email protected] - subject VMwareMorningcheckVC01$ CurrentDate '
    SmtpServer - mail.sanlam.co.za - from [email protected] '
    -BodyAsHtml-body $reportHtml - accessories 'C:\PS\Output\VC_$CurrentDate.csv '.

    Thank you in advance for help.

    You could use a ForEach loop through all vCenters and combine the results in a $1 report.

    Something like that

    $vCenters = "VC01","VC02","VC03"
    
    # Clear old sessionsDisconnect-VIServer $vCenters -Confirm:$false
    
    $report = @()# Check VC VC01 for Disconnects and Maintenance mode and Not Respondingforeach($vc in $vCenters){  Connect-VIServer -Server $vc -User FakeUSer -Password FakePassword
    
      $Report += (Get-VMhost -State Disconnected,Maintenance,NotResponding | Select @{N="VC";E={$vc}},name ,connectionstate)  Disconnect-VIServer $vc -Confirm:$false}
    
    # parse info to be html ,and give it date stamp
    
    $ReportHtml = ($report | ConvertTo-Html | out-String)
    
    # Write out CSV file and give it a Data Stamp
    
    $CurrentDate = Get-Date -Format 'MM-dd-yyyy_hh-mm-ss'$filename = "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
    
    $Report | Export-Csv -Path $filename -NoTypeInformation -UseCulture
    
    # Send info with Mail
    
    Send-MailMessage -To [email protected] -Subject VMwareMorningcheck$CurrentDate `-SmtpServer mail.sanlam.co.za -From [email protected] `-BodyAsHtml -Body $reportHtml -Attachments "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
    

    I added the property vCenter for each line in the report

  • Need help with drivers for Satellite P205-S6267

    I think I have all the drivers for my laptop, but I can't control the brightness of the screen or access capabilities of standby power. I downloaded tons of drivers power saver, and none of them work. Someone please help. I am running XP and the only driver I found is for Vista. I've been at this for two days... Please write to me at:

    [email protected]

    Hello

    Just FYI: whenever you need a driver download from http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp?

    As you can see your model of laptop is not yet supported for WXP and I guess you have to wait because you need precisely designed these tools and utilities for your laptop model. In the meantime, I think you can live without brightness control option. In my opinion, it is not so important. Also try to use the Windows power saver options. I'm sure you can use them up to what Toshiba offer WXP tools and utilities.

  • Need help with search for mdb using DW in ASP.

    Hello

    I'm trying to put in place a db on a Web site search tool using mdb and dw in ASP. have THEY put in place. Tested OK. Have used ms help pages (printed some) and the DW 8 missing manual to:

    Configure and test a connection string to a database and it is fine.

    Set up to search with a single parameter and it tests OK.

    Configure the results page and it tests OK too.

    I can display the search page and the results page by using the toolbar search engine address and local host by IIS installation and this is very good.

    Unfortunately, when I test the search page and use a proper search for the db password, the results page displays very well with the titles of the table, but no data. I am highly dependent on the ease of DW and I'm not much on the code.

    I tried a lot of different things, but there are so many possibilities! I tried GET and POST. I think that the problem is either in the original report send the form data to the server, the mdb data collection or data display in the final table, although it's conjecture. It covers almost all areas. Also I don't know if "repeat" in the table may have something to do with it.

    If anyone can help me with some general ideas on how I can be able to go forward. I was at this point for about a week.

    Thank you very much in anticipation

    OK, you're text field is named "textfield", but the query string you are testing for is called "search". They must be named the same.

    " size="30">

    rsSearch__MMColParam = Request.QueryString ("search")

    I don't know why you are populating the form field with a value of query string. The value does not exist because there is no field named "search". And the sending of the form (EEG) is what creates the query string that uses the results page.

    Rename the textfield object in your 'Search' form and it should work.

  • Need help to calculate the start and end time and place the result in a term like text box

    I did a search on the forum for calculating start and end time and found the code depending on which I am using as a formcalc on the duration field.
    ==============================================================
    Form1. Page1.duration::calculate - (FormCalc, client)

    If (HasValue (StartTime) and HasValue (EndTime)) then
    industrial var = Time2Num (StartTime.formattedValue, "h: mm A")
    var = Time2Num out_ (EndTime.formattedValue, "h: mm A")
    If (IN2 > = out_) then
    xfa.host.messageBox ("start time cannot be greater than or equal to the end time.")
    $.rawValue = null
    on the other
    var out_ - IN2 = diff
    $.rawValue = diff/3600000
    endif
    on the other
    $.rawValue = null
    endif
    =============================================================

    Then, when I enter for example from 15:30, an hour of beginning and end of 04:00

    The duration field will say 0.5

    How can I get my form to say 30 minutes instead of placing a decimal?

    Secondly, how can I use field models LC where the employee can just type 330 or 03:30 and it automatically based on the computer's clock on time to start 15:30?

    Any help will be greatly appreciated.  Thank you.

    Attached is the form for display:

    https://Acrobat.com/#d=f1kxh5qjuow5ujyZduF8OQ

    To view the results in a regular time format, you can use:

    $.rawValue = Num2Time (diff/3600000, "HH: mm")

    For a flexible time entry check this example.

    http://thelivecycle.blogspot.com/2011/05/flexible-Eingabe-von-Daten-und-Zeiten.html

  • Need help with divers for ASUS Intel Socket 775 Motherboard,

    Need help to locate drivers for this motherboard, my external USB hard drives do work not be recognized, no drvers for SM Bus controller, link controller SATA Silicon Image Sil 31 or 32,.

    To help you to download the drivers for your computer, you can check out the link below. You can also contact the Asus Support using the link below.

    http://support.ASUS.com/download/download.aspx?SLanguage=en-us XD

  • Need help with as3 for pop-up window

    I'm nearing the end of the semester in my Flash Animation class. I learned things very simple AS3, extracted etc. code. I'll try to find the actionscript code to encode a simple popup window, but have not found a clue.

    Here's what I want to do... I have a white box with a certain guy on the stage. When a person clicks on the white box, I want a popup to open which is larger, which contains the same type but bigger. This box will have an x, so it may be rejected. I don't want to do it in html, only in Flash CS5. I don't want a browser window, I want just a larger version of the smaller area. I know how to build the two boxes, do not know how to write the code. I know there will be a click on the mouse event listener, and then I'm lost.

    Can someone help with the code that I could use? It would be most appreciated.

    It would be something along the lines of... (using the names of instance from your description)...

    Popup.Visible = false;

    whiteBox.addEventListener (MouseEvent.CLICK, showPopup);

    function showPopup(evt:MouseEvent):void {}

    Popup.Visible = true;

    }

    popup.popupX.addEventListener (MouseEvent.CLICK, hidePopup);

    function hidePopup(evt:MouseEvent):void {}

    Popup.Visible = false;

    }

  • Need help with italics for the ePub and InDesign CS5

    Can anyone one help out me. I can't find the answer to this and I know it must be simple, I just lack.

    I create an ePub from InDesign CS5. All I want to do is have the italics that are displayed in the text box in InDesign, see the in the epub file.

    I prefer not to say what I did (I think I've tried everything, but obviously I got them all wrong, so no point listing them) and I hope that someone can make a simple guide, step by step how to make italics appear in the ePub file.

    Sorry if this question is under everyone, it's really annoying that I can't figure this on my own.

    Yes unfortunately sometimes does. ID is really a ship in order to get the content in epub format.

    You must go through your CSS for every job.

    Addition of

    serif; or without serifs; After each occorence a police.

    also, most in CS5 importanley make sure you have font name in the top of the CSS file "" round then, otherwise it appears correctly in the Adobe Digital Editions software, actually to check the rest of the code in this a well for example:

    {@font-face}
    Police-family: Minion Pro;
    make-style: normal;
    make-weight: normal;
    SRC:URL("fonts/MinionPro-regular.OTF");
    }

    I really only the minimum required in ID and do the rest in dreamweaver

  • Need help with the symbol 'start '.

    I created an animation symbol to illustrate the continuous flow of balls along a path.

    The element is called Ellipse and repeat at the end of the timeline by sym.play(1000) (0); (see first attachment)

    Ellipse is part of a named symbol S1, which is repeated 3 times with a STOP in time 0.0 and the offbeat GAME.5 second. (see second attachment)

    S1 is part of a symbol named AH. (see third attachment)

    I created a button with an action that triggers F - IN on the timeline, which produces a sequence of fadein. The action is simply: sym.play("F-IN");

    My question is: how to make the animation symbol AH 'start' of the first ball when the trigger is activated (button)? When the action is triggered the animation AH already plays.  I tried sym.getSymbol("AH").stop (setting); in creationComplete for the scene, but the result is that the animation is already playing when the trigger is activated, and all four balls are moving in unison (it looks like a ball...).

    Not sure if I'm using all the right words - a little back to the present. Please let me know what other information I provide. I use EA CC 2015 on Windows 10.

    Thank you

    Screenshot_AE_1.pngScreenshot_AE_2.pngScreenshot_AE_3.png

    Pittsburgh_joe,

    I think that I finally thought to it. I had to modify the symbol AH and S1 and set 'Autoplay' to 'off '. Then I had to issue a sym.getSymbol("AH").play (0); to start the animation when the F - IN action has been triggered. Once the animation is played I could just fade in and out.

    Turns out that I was also going through my stop() action that I put in 1 sec on the timeline to 0. A lot of trial an error... but it seems to work ok now.

    Here is a LINK to a video that explains what I was trying to actually do.

    Thanks again for your help!

Maybe you are looking for

  • Satellite A300-1MT freezes from time to time

    Hello. My lay is old and only 3 days and the only problem is that it freezes every time.I use it on AC/high performance. I just work on it, and when I run the installation of a game it freezes usually, when sometimes I'm working on it, just browse th

  • dial the node of the library - using a structure with dll

    Hi people. I expect to receive assistance or advice on solving this problem I am having in labview: Some background - I am using the 'call library node' to allow me to use a .dll file to control remotely via RS - 232 power supply. I did very well so

  • DVD RW drive does not.

    HelloIM currently having a problem with my dvd rw drive that just isn't ready to all media now, music, dvd, blank discs etc.I tried microsoft AutoCorrect and self-help guides and nothing seems to work and have also tried 2 uninstall and restart and s

  • iPod Touch leaves the .dat files in Favorites

    Whenever I plug my ipod touch into my computor it does an automatic synchronization and leaves a bunch of .dat files in all my favorite folders. This is a bread PITA to delete I seem to only be able to remove one at a time, and there seems to be hund

  • RDP Windows 2003 accident

    We have an employee who uses a HP 6500 office jet and connects via rdp to our windows 2003 server.   We recently changed to another server (also windows 2003) for rdp and installed its print driver.  When she connects the driver load and quickly bloc