Need help with m3umaker / creating Playlists
Hello world.
I use the same program, and yes I have to specify the extension to the playlist .m3u. When you see the fear of music on the left you add songs on the right side? but the m3umaker I use the .exe extension and not the extension .jar. You can open the playlist newly created with notepad to see whats inside.
Tags: SanDisk Sansa
Similar Questions
-
Hello all, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version
. Hello everyone, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version
What JDK you are using?
You are probably using an old version of the JDK, that class while compiled under JDK 1.7.0
For example, work with the correct version, and it will be fine...
-
I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!
Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?
If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address
-
Need help with the port forwarding for a XBox remote Streaming
I have a router R6200v2 and need help with port forwarding.
I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere
http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/
I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.
Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?
Hi @varxtis,
You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.
1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)
2. Select the type of service (TCP, UDP or both)
3 entry 5050 times a start external Port and external endpoints.
4. Select the IP address of your XBOX.
5. Select apply.
6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.
Kind regards
Dexter
The community team
-
Need help with network home using Airport extreme
I need help with my home network. I'm not very aware when it comes to all things network. Here's how my network is currently set up.
Cable modem to Airport Extreme for Gigabit Switch. Cables come out of the switch to all areas of the House. I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch. I hope I am explaining that properly.
My problem is that this seems to have caused some of my connections cable does not work. When everything is configured, it has worked well. All connections in the House worked. Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage. Since that time, a lot of the ethernet wall plugs are not working. For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.
Any help you can provide would be great.
I would like to get the return tech to help you to...
But it is likely that something (or someone) has tampered with the settings.
The layout is fine... but you can cause problems with the network by creating a loop.
This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.
Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.
Unplug the two AE you have that function as extensions...
Turning off everything else... then it works again...
Do it in this order.
Modem... Wait 2 min
AE... Wait 2 min
Switch.
Now check that the network is working properly... power of customers in various locations and make sure everything is good.
If so, then manually reset the two AE of factory and redo their installation.
-
Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)
I don't know why vista windows no longer charge, or when the files and folders disappeared
How Windows Defender is on this problem?
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
New user needs help with the creation of an animation :)
Hello
IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.
I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do
Would appreciate any help!
There are several ways to do so.
One way would be to create a title with the name and title with the password. Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.
-
Need help with the data storage store, local array and network connections
Need help with my ESXi 4.1 installation
My hardware:
I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis. I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.
The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.
I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.
My Situation:
I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service. I've set up host via a dynamic DNS service name give me a static hostname on the internet. I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup. It is a domestic installation.
Help with the data store and network:
I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format. Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box. I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.
I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.
Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs. I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top. I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.
I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?
Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.
You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).
Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.
RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.
You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.
Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.
UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.
-
Hello
Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.
For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.
Here are two pictures that I'm trying to mix.
I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.
Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.
Here is a fairly simple method:
First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)
Mask on white background of the brain and turn the image to 0% of saturation.
Put the brain on basketball on its own layer. Make the overlay blend mode.
Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.
-Now, you have a brain in a basketball, but the brain is a bit too subtle.
Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).
You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.
-
Hi, I need help with my flash mp3 player
Hi, I need help with my mp3 player, I wan't to add the pause button... Can you help me?
I created the button I added btn_pause and it won't work.
function soundStatus() {}
var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded () / _root.sound_mc.sound_obj.getBytesTotal ();
_root. Loader.loadBar._width = amountLoaded * 260;
duration = _root.sound_mc.sound_obj.duration;
position = _root.sound_mc.sound_obj.position;
_root.playHead._x = position / duration * 272 + 5;
}
btn_play.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
This._parent.sound_mc.songStarter (songfile [song_nr]);
};
btn_pause.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
This._parent.sound_mc.sound_obj.pause ();
};
btn_stop.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
This._parent.sound_mc.sound_obj. Stop();
};
btn_fw.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
(song_nr == songfile.length - 1)? _Global.song_nr = 0: _global.song_nr ++;
_root.sound_mc.songStarter (songfile [song_nr]);
};
btn_rev.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
(song_nr == 0)? _Global.song_nr = songfile. Length-1:-_global.song_nr;
_root.sound_mc.songStarter (songfile [song_nr]);
};
< proposed by the mod to as3 - kglad >
:
function soundStatus() {}
var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded () / _root.sound_mc.sound_obj.getBytesTotal ();
_root. Loader.loadBar._width = amountLoaded * 260;
duration = _root.sound_mc.sound_obj.duration;
position = _root.sound_mc.sound_obj.position;
_root.playHead._x = position / duration * 272 + 5;
}
btn_play.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
This._parent.sound_mc.songStarter (songfile [song_nr]);
};
btn_pause.onRelease = function() {}
clearInterval (timeInterval); you must re - set interval when the unpause button is clicked
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
This._parent.sound_mc.sound_obj. Stop()
};
{btn_unpause.onRelease = Function ()}
This._parent.sound_mc.sound_obj. Start(position/1000);
}
btn_stop.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
This._parent.sound_mc.sound_obj. Stop();
};
btn_fw.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
(song_nr == songfile.length - 1)? _Global.song_nr = 0: _global.song_nr ++;
_root.sound_mc.songStarter (songfile [song_nr]);
};
btn_rev.onRelease = function() {}
clearInterval (timeInterval);
_root.timeDisplay_txt. Text = "00:00 / 00:00 ';
(song_nr == 0)? _Global.song_nr = songfile. Length-1:-_global.song_nr;
_root.sound_mc.songStarter (songfile [song_nr]);
};
-
Need help with query between 2 dates
Hello
I did not SEE in a long time and need help with a simple query.
I have a table of DB access with 3 fields, name, date and number
What I want is to create a query to retrieve all the names between 2 dates
When I ask the date field, the results are showing in this formats 2013-07-12 00:00:00
Here's my query
< cfquery datasource = 'mydb' name = 'test' >
SELECT name from myTable
where edate between ' 2011-01-01 00:00:00 ' AND ' 2013-01-01 00:00:00 '
< / cfquery >
< cfoutput query = 'test' >
#name #.
< / cfoutput >
What I get is this error
ODBC = 22005 (assignment error) error code
[Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.
Don't know what I'm doing wrong here.
Please let me know.
Thank you
SELECT ename
FROM MyTable
WHERE edate BETWEEN
AND
#ename #.
-
If I want to watch my site ive created in google is to see this:
Woning huren in Paramaribo, Suriname
hureninparamaribo.nl /.U good bij ons een in Suriname hurenvakantiehuis. Deze woning is good in room Paramaribocentrum van het. Of woning is een rüstige wijk good ...
U has said een + 1 belangrijkste As you can see before the URL is no WWW. When I click on the link, the only thing I see is a small form. Y at - there someone who can tell me where I can change this?
Kind regards Brian
Great! Thank you..
Date: Wednesday, May 9, 2012 06:15:57-0600
From: [email protected]
Topic: Need help with google ranking
Re: Need help with google ranking
created by Ken Binney in Dreamweaver - discover complete discussion
Hello, Brian - the problem is the file extension, you use on your pages in the folder root of your remote site you have a page with only a form named:http://www.hureninparamaribo.nl/index.html and you have this other page with all your content named:http://www.hureninparamaribo.nl/index.htm your server displays the html file then delete the index.html page form rename the index.html page content
Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4390439#4390439
To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4390439#4390439. In the Actions box to the right, click on stop Notifications by e-mail.
Start a new discussion in Dreamweaver, by e-mail or at the Adobe Forums
For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.
-
Newbie needs help with cookie cutter in PSE8
I'm new to PSE8, the cookie cutter tool and work with layers, what I need help with to accomplish what I want to do.
I want to use one form of cookie cutter to make several 'holes' in an image, leaving a solid color background layer to show through. (Or another path, use the form of Cutter of biscuit as a solid 'rubber stamp' color to stop shape on the image in several places)?
I opened my image in the editor and create a solid color fill layer, and then I select the shape of Cutter of biscuit that I want to use, for example a sheet. Then I select the color fill layer, click and drag to create the sheet randomly somewhere in it. When I release the mouse button, the window returns to the image and there is the leaf, locked in a box, in the color I want, on the image. I drag the box (leaves) to where I want it and click the green checkmark to accept. So far so good. Here's the problem: in order to create another sheet on the image, I have to create another layer of fill and repeat the whole process. If I try to use the same fill layer to a second sheet, the first sheet disappears. I must be missing something very simple, but I can't figure out how to get out several sheets of a filling layer. Also, I use a version without the constraint of the sheet because I would create several sheets of different sizes out of the fill layer as well.
I would be grateful for any help or suggestion!
Try the following:
- File > new > empty file - white
- Create a new layer, fill it red
- Create a new layer, fill it out of blue
- Access the marquee tool, drag the rectangle to the blue layer. You should see "ants in market". Press DELETE on the keyboard. You should see red in the rectangular hole.
- Access to the custom shape (U) tool. In the form of culture library, select the heart shape black all and hang out on the blue layer. Press CTRL + left click the thumbnail of the layer of the capping layer for "mobile dotted." Hit delete on keyboard twice, and you should see red in the heart shaped hole.
- Continue with other forms.
-
Need help with this gallery of xml!
I have build a gallery but its very simple... There are pictures of the xml file.
I have attached all the zip files.
I just want two things if anyone can help.
first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.
and secondly, I want to use the AutoPlay feature.
Once swf starts images came one by one with a vertical drop of a few seconds.
Thanks in advance... I really need help with this..!
For the look of sliding effect using the actionscript class Tween. Allows you to create motion tweens using the code. The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...
import classes before using
Import mx.transitions.Tween;
Import mx.transitions.easing.Regular;TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);
To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time
-
Need help with Flash - really basic!
Hi, I really need help with Flash and quick. I have to create an auto-run cd, but before I can create that, I have to make everything works! I took a class in College Flash, which up to 1 1/2 ago so im kind of knowledge missing!
My first problem is as follows:
I have the homepage, and it contains a button English and french.
When you click on buttons, it brings you to the next page, either resourcesFr or resourcesEn.
I tried to use the loadMovie script but and it works but the new page loads on the home page you can still see the English/french under buttons. How can I fix? I know its simple but I am short on time... Should I still use the loadMovie script?
My other problem is that im trying to have another button to link to a folder. Use the script for getURL for this as well?
Help!I was able to solve my problem... it was only the forward slash that were in the wrong way... so the correct code is:
on (release) {}
DRV = _url.substr (8.1);
getURL (drv + ": / English/brochures");
}Only took me 5 days... I think I need to buy a script book action! Laughing out loud
Maybe you are looking for
-
fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory
I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.I found
-
How to install Service Pack 2 on an old computer?
I have an old computer that I am trying to get running for a friend, and he need to Windows Service pack 2 (it works on XP), but it doesn't have an internet connection. I'm not sure what action I can take that are plausible and legal. I tried to burn
-
Western Digital My Book Home Edition WD5000HICS-00 500 GB External Hard Drive
I am on a PC running Microsoft Windows XP and have had the MYBOOK for at least 2 years and have had no problems so far. We moved ouir PC hook-OUs from one room in our House to another and now when I turn on my system it's not fix the my BOOK device.
-
When you try to install Windows updates I get errors 66A and next.
original title: 66A and FF errors I tried to install the important updates KB2446708 and KB2467174. On the first appears an error 66A. On the second a FF error. How can I solve this?