Need help with my computer speaker (s) Please!

Similar Questions

• Need help with as2 as3 conversion. Please, I beg you.

  Could someone help me to convert as2 as3, please?

  Source code:

  _root.magnet = 500;
  _root.magic = 10;

  and

  onClipEvent (load)
  {
      homex = this._x;
      homey = this._y;
      forcex = 1;
      forcey = 1;
  }
  onClipEvent (enterFrame)
  {
      x0 = this._x;
      y0 = this._y;
      x1 = this._xmouse;
      y1 = this._ymouse;
      distancex = x1 - x0;
      distancey = y1 - y0;
      distance = Math.sqrt(distancex * distancex + distancey * distancey);
      powerx = this._x - distancex / distance * _root.magnet / distance;
      powery = this._y - distancey / distance * _root.magnet / distance;
      forcex = (forcex + (homex - x0) / 2) / _root.magic;
      forcey = (forcey + (homey - y0) / 2) / _root.magic;
      this._x = powerx + forcex;
      this._y = powery + forcey;
  }

  I am a newbie in flash so if anyone can help with this would be great.

  I really need to be done please help me.

  MovieClip(root).magnet = 500;MovieClip(root).magic = 10;
  

  and

  var homex:Number = yourmc.x;var homey:Number = yourmc.y;var forcex:Number = 1;var forcey:Number = 1;
  
  yourmc.addEventListener(Event.ENTER_FRAME, loopF);
  
  function loopF(e:Event){    var x0:Number = e.currentTarget.x;    var y0:Number = e.currentTarget.y;    var x1:Number = e.currentTarget.mouseX;    var y1:Number = e.currentTarget.mouseY;    var distancex:Number = x1 - x0;    var distancey:Number = y1 - y0;    var distance:Number = Math.sqrt(distancex * distancex + distancey * distancey);    var powerx:Number = e.currentTarget.x - distancex / distance * MovieClip(root).magnet/distance;    var powery:Number = e.currentTarget.y - distancey / distance * MovieClip(root).magnet/distance;    forcex = (forcex + (homex - x0) / 2) /MovieClip(root).magic;    forcey = (forcey + (homey - y0) / 2) / MovieClip(root).magic;    e.currentTarget.x = powerx + forcex;    e.currentTarget.y = powery + forcey;}
  

• Need help with a Windows update it please...

  03/15/13, we had a storm, and when well even I had a surge protector for a reason, he put my date one (1) year until 15/03/14 which I didn't notice at the time, so when I started my pc, he had a update installtion, which was the following: good security for Windows Vista (KB2807986) update less say , my pc was a bit confusing, because until what I changed the actual date in the BIOS?  She had always installed this update for 2014, so my pc and the browsers would not work correctly until I changed the date.  But in the meantime, the correct installation of the certain this update was never made...  So, I need help on what to do.  How to remove this update? Or should I leave and just manually install the update correct?  According to what it is, I need help on how to do it and where to find the correct update?  Can someone help me please?  and thank you!  I have Windows Vista Ultimate 2007 ServicePack2 32bitOS

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. what exactly is the problem that you are facing as a result of this update?
  2. do you get an error message?
   
  I suggest you to install this update manually and check:
  Reference:
  Update security for Windows Vista (KB2807986)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36915
   
  See also:
  Remove an update
  http://Windows.Microsoft.com/is-is/Windows-Vista/remove-an-update
   
  I hope this helps.

• I NEED HELP WITH MY COMPUTER... FRUSTRATED... _

  the error message is: the internet has stopped working.  It runs slow and won't do anything.  I restored it in another era, but too bad cause all the restore points appears to have problems too.  I tried to back up the files, but it is said that there is a device error and will not backup.

  Hi Vicky49,

  A when the last internet Explorer worked very well?

  B. What is the exact error you get when saving?

  C. you are trying to save the files in an external hard drive?

  D. recent changes to the computer?

  E. who is the manufacturer of your computer?

  Please provide more information about backup problem.

  In Windows Internet Explorer 7 configuration settings can cause one or more of the following problems:

  • You experience performance issues in Internet Explorer.
  • You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".
  • Internet Explorer stops responding.

  You are trying to optimize check and internet explore if you get the same error. Open the link below and click it on the fix button.

  http://support.Microsoft.com/kb/936213

  Backup error
  http://support.Microsoft.com/kb/952272

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I need help with my computer toshiba laptop. It keeps bluescreening!

  I just restored my computer to the State of the box and he keeps blue screening. Every code is different.

  Sometimes randomly when the computer is running.

  I checked the hard drive and ram, both are very good. Here's the latest report of the blue screen.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6000.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: a

  BCP1: 00000004

  BCP2: 00000002

  BCP3: 00000000

  BCP4: 81ED1424

  OS version: 6_0_6000

  Service Pack: 0_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini010412-06.dmp

  C:\Users\Niko\AppData\Local\Temp\WER-242643-0.SysData.XML

  C:\Users\Niko\AppData\Local\Temp\WER34C5.tmp.version.txt

  It's a Toshiba A215-S4747 laptop running vista 32 bit. I think it's a driver problem, but cannot find the source.

  I have restored this 'thing' 3 times now and he keeps doing.

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• need help with my computer

  I have a toshiba and it has been changed to windows vista it has windows xp on it... its works well for a while and now I'm get spyware to appear on my screen and do not let me use a lot of my programs... How do I restore the factory on here to solve this problem, because I can't delete it out of my system and I do not have a disk to restore my computer... What can I do? Please help me thanks.

  I will try to use the (link above) malicious software removal tool to analyze the threat.  If you need to do this in safe mode. vader95 Windows 95-7 office 97 - 2010 Ubuntu 9.10 - 10.10

• I need help with my computer Windows 7 freezing. How can I stop this?

  This just happened to me because my computer has been built up and tested in the last month. I was in the middle of work on an assignment for the class online and just froze. I couldn't use the mouse or keys and was forced to hit the reset button on the front of my computer. I use Windows 7 Ultimate with all updates. I have the Intel Core i5 quad core processor and PCI Express card Asus Geforce GTX 550Ti 2.0 and 4 GB of memory hardware. It is the copy of the event viewer. I will list all the codes that concern as well. This is the entire code format: (this has happened before, so I need to know why it happened and how I fix so it does not happen.) Thank you very much for your help!  Ernie Mink

  -

  -

   

   41

   2

   1

   63

   0

   0 x 8000000000000002

   

   21448

   

   

   System

   ErnieJMink-PC

   

   

  -

   0

   0 x 0

   0 x 0

   0 x 0

   0 x 0

   fake

   0

   

   

  Hi Ernie,.

  You get a Blue Screen of Death (BSOD) error?

  A 41 event is used to signal that something unexpected has happened that prevent Windows to close properly. This problem may be caused, if some hardware drivers are not updated.

  I suggest for the link and follow the steps in the article based on different scenarios.

  Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 8, Windows Server 2012, Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/2028504

  See also:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• HP pavilion g7-2294NR: need help with my computer laptop refurbished hp g7

  I recently set up my BIOS after upgrade to win 8.1 to win 10 and he recommended that I put in place a "administrator password" and "power on password". What are the differences and how do I get rid of them!
  
  I can not go in the BIOS (Insydh20 3.7) more by pressing ESC and because of this, I can't reboot my OS now because of that, because I ALSO had the BLACK SCREEN OF DEATH! Someone help me please! My passwords are:
  Admin: ($ 0 4r! c @)
  Market: 9 q$ R? g. @.
  When I enter a wrong password I get this code: 67072996
  
  I would REALLY APPRECIATE all your help. Thanks in advance!

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• need help with the computer 'See' the disc into the cd in windows xp

  When I try to read a cd or dvd (did not use this material in a year) my computer don't "see" the disc. I used to have a pop-up window asking me 'what do you do with that?' this window no longer displayed. I tried microsoft 'Fix - it', he says that the cd/dvd is working correctly; a clean boot, has not helped either. Have not reinstalled the driver... ideas?

  Hi Apollo,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are havin problems with playback option Autoplay not activated during playback of CD/DVD. I'll be happy to help you with this problem.

  AutoPlay lets you choose which program to use for different types of digital media, such as CDs of music or photos from your digital camera.

  -Did you do changes on the computer before this problem?

  I suggest you to follow the steps from the link and check if the problem persists.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Nooblet needs help with Linksys WRT160Nv2 wired installation please

  Hello

  I've set up my Linksys WRT160N and when I check the status of the router in the configuration based on the web, the status tab page, there are numerical values for the Internet IP address.

  Therefore, I believe that the router connects to the internet via my modem netgear with no problems.

  The problem I encounter is that my browser (I tried explore and Firefox) will not have access to the internet.

  I tried to access the internet with firewall off, but always without success.

  Can someone give me some advice as to what settings in Windows XP or in the contrary case, I need to change to fix this problem.

  Thank you in advance,

  Thanks for the help guys.

  I seems to have fixed.  I uninstalled the Intel Pro Wireless software and restarted.

  Then I installed an older version of the driver 3.

  Was done half of the work, under network connections when I 'configure' network card, it is now showing a MAC address, before the uninstall and reboot, the MAC was using all 0 configure, but ipconfig/all showed the correct MAC address.

  But now the wireless has been constantly acquire an address, then connected, then entered directly by acquiring an address once again. so wouldn't connect after a few attempts.  Before uninstalling, it showed as connected, but I could not use the connection to access the router, internet, etc.

  Now, to fix the constant acquire an address, I updated the driver for the latest driver and the Intel Pro Wireless software and now here I am happily on my connection wireless hassle.

  Once again, thank you for the help.

• Need help with the error Code: 1002 please!

  I am trying to update my CC Id & get the error Code: 1002

  Any suggestions before I try to support?

  Thank you!

  Hello

  Please follow the steps below:

  Uninstall CC Desktop App using https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Run the tool cleaning Adobe CC from here: https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  Restart your computer

  Install creative cloud app: https://www.adobe.com/creativecloud/desktop-app.html

  Let us know if it works!

• Need help with the automatic backup feature - please!

  Hello

  I recently started a flash animation and the AutoSave feature is enabled.  I got a good animation, but decided to play a little with it.  After a few moments, I decided to call one night and you exit the program ensuring NOT to save my work.  When you open this file the next time, I just found out that Flash has my file saved automatically while I was playing.  Now I have an animation worthless and have to start over again.  Is it possible to go back to an earlier backup or AutoSave at this point or I am about to do a lot of work again?

  Thanks to all who can help.

  As far as I know, the auto save feature is not able to track down the previous versions of the document being saved - that calls for a specified version control system. I think that Flash saves the file only if it is requested to the. There are several ways to enable or disable auto-save:

  1. in the dialog "new Document." You can choose to activate the automatic backup.
  2. In the "Properties of the Document" dialog box, you can set the check mark.

  If these are true, it will not happen of any economy car. The problem may be, there is also a section called ASR. Backup and recovery is not the same when it comes to Flash, but people tend to consider the same. You set the AutoRecover feature in preferences under general.

  • Windows: Edit > Preferences: general > auto salvage
  • Mac OS: Flash Professional > preferences: general > auto salvage

  Both has a default value of 10 minutes and it can confuse the user. Please see the document to make sure, that you have not disconnected ASR instead of the Auto-Save. You can do this:

  1. Go to preferences (Ctrl + U on Windows, and command + U on Mac OS) and check if the automatic recovery is set.
  2. Go to the properties of documents (Ctrl + Windows and cmd + D on Mac OS) and check if the Auto-Save is set.

  The first (in preferences) is ok to have fixed. It is the second, which could have caused problems for you.

  /Ockley

• Need help with the computer AL-300

  Hello

  Please please I want registered my cell phone under warranty, but I put t how I right there.
  Please, help me to do it.

  Thank you & best respect

  Hello, my friend

  Please do not be angry on me, but your ad is not understandable.
  Description of the laptop model is also false, so please be nice and we send the description of the exact and correct laptop model (check label gray in the lower corner) and explain what you want to do exactly.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.