Need help with my LAN adapter wireless and cable.
After I installed Windows 7 I have experienced the following problem, connected my Acer Aspire 4736z laptop to the internet.
After a long period of maintenance of the computer to be idle, eg.in standby or hybernation. the adapter LAN and Wifi Adapater is unable to detect. So I have to restart the computer to make it work. I tried updating the driver but it says that the system already has the latest software. but this happens every time the the computer to sleep and wakes up.
the drivers for the hardware istalled are Atheros AR5B91 Wireless Network adapt and Atheros AR8121/AR8113/AR8114 PCI - E Ethernet Controller and Microsoft Virtual Wifi Miniport Adapter.
Windows Network Diagnostics
Problem encountered There might be a problem with the driver for the Wireless N...
Detected configurecomplete wireless network adapter
The wireless network adapter problemscompleted
There might be a problem with the driver for the region...
Detected configure the cable networkover the wired network adapter card problemscompleted
Problems found
<>There might be a problem with the driver for the wireless network connection card Windows could not automatically bind the Protocol IP on the network card stack.
Detected
Configure the wireless network adapter Configure the network adapter to communicate with the network. This ensures that the Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) can be used on the network adapter.
<>There might be a problem with the driver for the connection to the Local network map Windows could not automatically bind the Protocol IP on the network card stack.
Completed
Network Diagnostics log file name: E86CD671-170C-42B3-B6F7-7DB88F9B6343. Repair.Admin.3.etl
The wireless network adapter problems Windows Help and Support can provide more information about the resolution of driver or hardware problems.
Completed
Detected
Set up the wired network adapter Configure the network adapter to communicate with the network. This ensures that the Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) can be used on the network adapter.
Completed
Network Diagnostics log file name: BFE9A7EC-918C-4453-B383-C45DEB6332D6. Repair.Admin.0.etl
The wired network adapter problems Windows Help and Support can provide more information about the resolution of driver or hardware problems.
the problem is solved, but I did not try anything. It seems he healed it self, can be via windows update something. Thank you guys
Tags: Windows
Similar Questions
-
Need help with Sprite´s. (Rectangles and circle)
Hello!
I kinda need help with a project. I m supposed to do a script that responds to a click and moves the circle of one rectangle to another.
(Here's a picture)
So, what I want is: when I click on the blue rectangle to the right, the circle must move instantly in the rectangle on the right. And same thing on the opposite path.
Thanks in advance!
-Best regards,.
Aleksandar "Dyxir" B.
import flash.events.MouseEvent;
leftRec.addEventListener (MouseEvent.CLICK, fCircle);
rightRec.addEventListener (MouseEvent.CLICK, fCircle);function fCircle(evt:MouseEvent)
{
Circle.x = evt.currentTarget.x;
Circle.y = evt.currentTarget.y;
}Note: Point for all alignment: Center
-
Need help with parallax effect - Adobe MUSE and Safari
Hey there,
I need help.
I did a parallax effect on my www.bloxmix.depage.
Firefox, Opera and Chrome are working very well.
Safari works worst.
Try and see.
Can someone help to solve my problem?
Thank you community
Hi Karl,
Given that the site works fine at my end, I guess the problem is with your local browser. Could you please try it on another computer and see if it works fine here or not?
- Abhishek Maurya
-
Need help with the classes of structure and folders!
Hello all :)
I've been programming some time in Actionscript 3 now. But most of the time I did not so much major projects. So I just had 1 folder with the Fla and class and other classes for different objects. But yesterday, I discovered that I need some more when structuring projects is growing. So what I would like is to have the main file with fla and a file in this folder with the classes or something. But I can't understand it. Searched around the web and Yes tried many things. So now, I have discovered that I need help to solve this problem :)!
Hope someon can help me with this one, it should be pretty easy, but I understand it now.Thanks to !
You have assigned the MainAs as the file MainFLA.fla document class?
You have an object in the library that is linked to the class 'Classes.Animal '?
I would like to declare the variable of animal1 where you have one, but I would not instantiate until, within the service of MainAs.
SerializableAttribute public class extends MovieClip {} MainAs
public var animal1:Animal;
public void MainAs() {}
the constructor code
animal1 = new Animal();
addChild (animal1);
}
Is the code that show you for the placement of the Animal object a typo or do you really have it assign the property x twice?
-
Need help with adapters for T60 wireless
Hello!
I recently came across a T60 and I need it to be able to 5 GHz Wireless. The wireless current is not.
I'm not a genius when it comes to wireless cards, where they are and whether or not they are compatible, this is why I come to you! Will you please help me find a wireless adapter which is dual band, so I can connect more than 5 GHz. No price is too high.
Thank you for your time!
-Gabriel Ruiz
Welcome to the forum!
If you do not use the BIOS modded, search eBay or Google T 42, 0825 , which is Lenovo a/b/g/n card than some T60 delivered with original series.
-
Need help with my Toshiba remote control and receiver for Qosmio G30 161
Hi all
I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.
I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.
Also to confirm that I'm under addition of Windows XP MCE.
Anthony Worlock
Hello
This remote will work, if you use it without any special drivers and special software, only in the Media Center.
But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)
Welcome them
-
Beginner needs help with Aironet 1131 G Wireless Access Point
I have a new Cisco Aironet 1131 G wireless access point. It takes an IP address and I can ping this address. However, I can't access it via the graphical user interface based on the web or the CLI. I preformed reset. Any suggestions would be greatly appreciated.
Thank you.
Hello
I can't access that means? you are not able to go to the CONFIG T of the CLI prompt? and if you are in the same subnet as the AP, are you not able to open to the top of the GUI? If you are not able to then, with the command 'show version' on the AP CLI and see if your image is "RCVKW8". If so you will need to convert the same IOS using the method below.
Let me know if that answers your question...
Concerning
Surendra
====
Please do not forget to note positions that answered your question and mark as answer or was useful -
need help with connection IntelPROset utility / wireless
Hi all
I have an Intel wireless card and the driver install this utility (Precision M4400 under XP Pro SP3). When I try to connect to a network secure, instead of asking for a WEP key it wonder about ownership of the device and indicates that I should be able to find this number on the device. In this field, that I can type only in number, therefore impossible to enter a normal alphanumeric key.
How can I ask him just the correct password, just like the utility of Windows? I read through the instructions and I have not found the answer. There may be a setting somewhere buried?
AAMT,
Toby
One of my employees has reported the same issue. I never encountered this problem before, but it's been long that I used this utility. I used workaround is to create a profile for the network wireless using the Intel PROset/Wireless configuration utility. Double-click the Intel Wireless Radio icon in the bottom right of the screen. Click the Add button to create a new profile. Enter a unique profile for the connecton and then the SSID name. Choose "Network (Infrastructure)" choose the type of security (personal or business), then the security settings (is it for my connection WPA-Personal (AES-CCMP).) Click on OK and then close the profiles window. You should be able to connect automatically to the profile. I hope that helps!
-
Need help with Windows Live Movie Maker and DVD Maker
I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer. I also added a title at the beginning of the film page, and I added at the end of the credits. Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD. I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging. I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player. For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM! Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out. Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons. Any help or advice before I blow a bridge! ???
Thank you.
/PR
I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer. I also added a title at the beginning of the film page, and I added at the end of the credits. Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD. I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging. I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player. For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM! Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out. Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons. Any help or advice before I blow a bridge! ???
Thank you.
/PR
===============================================
First of all a question... did you you save the project in a video such as format
. WMV or. MP4? Or have you just of WLMP project folder?I suspect that DVD Maker is to see your movie in one file
and he has no idea where are your scenes. More than likely it is
creation of scenes on his own in arbitrary places.In order for DVD Maker correctly, identify individual scenes
each stage must be registered as an individual video clip, then
the collection of video clips can be imported and each of them must
become an individual scene. DVD Maker is supposed to accept
up to 18 scenes.Just an experience you can import your new original
video clips in DVD Maker and see if it works properly. If
It does what you want... change and re-record your clips one video
both will be the fix.Good luck...
-
IP number looking for PSI - need help with a sql solution better and faster
Hello
I have a table (one) with more 1 000 000 IP addresses and numbers (the digital equivalent of the IP address)
I have a second table (b) which contains a mapping between the ranges of the ISP and IP. The table looks like this and more contains 150 000 entries:
BEGIN_IP_RANGE END_IP_RANGE ISP_NAME
-------------------------- ---------------------- --------------
600000000 700000000 ISP_X
800000000 900000000 ISP_Y
I'm creating a third table (c) which connects (a) IP numbers to identify the ISP from (B). The query looks like this:
CREATE TABLE c
AS
Select a.IP_ADDRESS
b.ISP_NAME
IP_NUMBERS a, ISP_LOOKUP b lkp
where a.IP_NUMBER between b.BEGIN_IP_RANGE and b.END_IP_RANGE
;
There is no key join between the 2 tables and so I use TO search for the access provider. The performace of it's terrible and table (c) takes several hours to create.
Does anyone have any thoughts/ideas/suggestions on how this research can be achieved by using a solution better and faster?
Thank you very much
Shah
The performace of it's terrible and table (c) takes several hours to create.
Hours what do you say?
See if the following can help.
Cardinalities are similar to yours. The ETG takes 7sec. :
SQL> create table ip_numbers (ip_address, ip_number) as 2 select cast(to_char(level,'fm099G999G999G999', 'nls_numeric_characters=,.') as varchar2(15)) 3 , level 4 from dual 5 connect by level <= 1000000 ; Table created. SQL> select * from ip_numbers where rownum <= 10; IP_ADDRESS IP_NUMBER --------------- ---------- 000.000.000.001 1 000.000.000.002 2 000.000.000.003 3 000.000.000.004 4 000.000.000.005 5 000.000.000.006 6 000.000.000.007 7 000.000.000.008 8 000.000.000.009 9 000.000.000.010 10 10 rows selected. SQL> SQL> create table isp_lookup (begin_ip_range, end_ip_range, isp_name) as 2 select 1 + (level-1)*5 3 , level*5 4 , cast('ISP_'||to_char(level,'fm099999') as varchar2(10)) 5 from dual 6 connect by level <= 200000 ; Table created. SQL> select * from isp_lookup where rownum <= 10; BEGIN_IP_RANGE END_IP_RANGE ISP_NAME -------------- ------------ ---------- 1 5 ISP_000001 6 10 ISP_000002 11 15 ISP_000003 16 20 ISP_000004 21 25 ISP_000005 26 30 ISP_000006 31 35 ISP_000007 36 40 ISP_000008 41 45 ISP_000009 46 50 ISP_000010 10 rows selected. SQL> create index ip_address_number_ix on ip_numbers (ip_number); Index created. SQL> set timing on SQL> SQL> create table ip_mappings as 2 select /*+ use_nl(a b) */ 3 a.ip_address 4 , b.isp_name 5 from isp_lookup b 6 join ip_numbers a on a.ip_number between b.begin_ip_range 7 and b.end_ip_range 8 ; Table created. Elapsed: 00:00:06.94 SQL> select count(*) from ip_mappings; COUNT(*) ---------- 1000000 Elapsed: 00:00:01.22
-
Need help with vSphere data script, packaging and sending it to the data warehouse
Greetings PowerCLI gurus.
Everyone can offer suggestions on a script which can query vSphere and pull on the following fields of the virtual computer:Name State Status Host Space in use Space used Format in a file in the CSV format and send the file to an FTP server?
Much respect to all, thanks a lot in advance.
Hello-
Happy to help you.
OK, well, if this database is accessible through a UNC path, you might make a copy directly using Copy-Item. If you use different credentials, you can encrypt and store in an XML file. HAL Rottenberg wrote to do http://halr9000.com/article/531.
Or, if this pension data is something that supports the secure copy (scp) or secure FTP (SFTP), those who would be good options. Again, you can store the alternative credentials in an encrypted in an XML file format and use them as needed.
Certainly, there is a balance to be struck between security and ease of use. It may be such that the transmitted data are not considered sensitive to all, and clear data transfers are acceptable. Probably still a good idea to take measures to protect the credentials at least.
-
Need help with the update server behaviors and deleting records
I am 'trying' to use the update and delete record server behaviors and I can't get the redirection page to set up correctly. What I'm trying to do, is to have the redirection came up with the right records depending on the CompId page. It seems that it is taking the CompId and agreementId (which are my unique ID) and use them in the url of the redirection page. Also, it updates the table. Here is the url that appears after I have send the update:
http://localhost:8888/dotweb/maintenance/agreement_home.php?CompId= & agreementId = 7
Here is the code for the update page:
Pending patent, trade mark, Tradesecret and straightened to copy recordedCopyright KML designs 2009Can someone tell me why it would show the CompId and agreementId when everything I asked the CompId? Thanks for your help. Just in case, I enclose you an html version of this file. It must be a php file, but is not one of the allowed file types.
CompId is not filled in the URL because you try to use the result of the rsAgree recordset object until the result of the recordset is created. However, you pass the CompId value via array $_POST as a hidden field.
Change this line (52):
$updateGoTo = "agreement_home.php?CompId=" . $row_rsAgree['CompId'] . "";
to do this:
$updateGoTo = "agreement_home.php?CompId=" . $_POST['CompId'];
-
Need help with sql query involving distinct and County
I have 2 tables and I want to get the number of specific names. Find the details below. It's hard to explain but I will try to provide as much detail as I can.
Table A:
ID of the SR
1001 1
1002 2
2 1003
1004 3
Table B:
Name of the key SrNew
1 David 1001
2 James 1002
3 James 1002
4 James 1003
5 James 1004
6 Mike 1004
Result: I'm looking:
Count names such as if the name appears for the same ID of Table A two times, and then only count 1.
Name of County
David 1
James 2 (1002 and 1003 for the same ID (ID #2) so count as 1 for this and then 1 more for 1004 and ID 3)
1 Mike
I have following question:
SELECT distinct (b.Name), a.ID
FROM TableA, TableB b
Where a.Sr = b.SrNew Group By b.Name, a.ID
and as a result I get:
ID name
David 1
James 2
3 James
3 Mike
Now, I want to just the number of each name with the result, but don't know how I can do this with a sql?
Thanks in advance.Who help me?
SELECT b.Name, count(distinct a.ID) FROM TableA a, TableB b Where a.Sr = b.SrNew Group By b.Name
Nicolas.
-
Need help with apex listener administration username and passwd
Hello
I downloaded apex ODD and tried lunch listener admin http://localhost: 8888/apex/listenerAdmin
Help me please the username and password.
Thank you very much.Hailt wrote:
Hello
I downloaded apex ODD and tried to lunch listener admin http://localhost: 8888/apex/listenerAdmin
Help me please the username and password.
Thank you very much.(1) do not not eating a listener. It is not good for you.
(2) you are sure that you are in the right forum for this? (You may be... but you may very well not be)... If ODD is open developer day information about passwords are usually in the installation instructions... I don't remember having to worry of the Auditors of the apex, but I havant used the latest versions...
The main objective of how to post to fix your possible eating disorder.
-
Need help with italics for the ePub and InDesign CS5
Can anyone one help out me. I can't find the answer to this and I know it must be simple, I just lack.
I create an ePub from InDesign CS5. All I want to do is have the italics that are displayed in the text box in InDesign, see the in the epub file.
I prefer not to say what I did (I think I've tried everything, but obviously I got them all wrong, so no point listing them) and I hope that someone can make a simple guide, step by step how to make italics appear in the ePub file.
Sorry if this question is under everyone, it's really annoying that I can't figure this on my own.
Yes unfortunately sometimes does. ID is really a ship in order to get the content in epub format.
You must go through your CSS for every job.
Addition of
serif; or without serifs; After each occorence a police.
also, most in CS5 importanley make sure you have font name in the top of the CSS file "" round then, otherwise it appears correctly in the Adobe Digital Editions software, actually to check the rest of the code in this a well for example:
{@font-face}
Police-family: Minion Pro;
make-style: normal;
make-weight: normal;
SRC:URL("fonts/MinionPro-regular.OTF");
}I really only the minimum required in ID and do the rest in dreamweaver
Maybe you are looking for
-
Buen dia, alguien por favor that can brindarme any information: Estoy instalando UN programa y me da el siguiente error "error of Lectura/Escritura C:WINDOWS/SYSTEM/InsDemo.exe", how I can dress esto? " Gracias Antonino
-
Is there a way to disable the tilt on your application?
-
Media player 12 playlist sorting
I hope I'm missing something. I create a playlist with tracks in a certain order. I save it. all right. then I accidentally hit one of the column headers (like "title"), which sorts the traces of this column. from there, is there an easy way to get t
-
Adding files MP3 to HP MediaSmart
Hi- I have a folder of mp3 files, I can't HPMediaSmart to recognize. I have Windows 7. I added in the Public Music folder and also added the folder to the list of folders in the settings. I don't find any option to import or browse for the files, I c
-
Quero o anular ID...
NAO estou interessado em andar a tempo but perder com this type of programs than so want faturar para tudo...