Need help with network home using Airport extreme

Similar Questions

• Need help with flash player using w/Win7

  OK, here we go. I have - Windows 7 Home Premium 6.1.7601 running service pack 1

  Type of system: x 64-based pc

  Windows Internet Explorer 9 (update version RC) 256-bit

  I use to be able to watch videos on youtube ect. But now flash player does not work. What is the problem? I have Adobe flash player 10 activex and installed shockwave player 11.5 and still it asks me to update my flash player. Need help.

  Hi, thanks. This "Perfect Optimizer" which was found and removed, McAfee did remove or MBAM?

  Is the trial version of MBAM, the free version which is a stand alone, which is run from your desktop or a version installed?

  You see the animation of the Flash Player logo and what version of Flash Player is available on the following site?

  http://www.Adobe.com/software/Flash/about/

  Then check on this Shockwave Flash object in your addons that I mentioned before.

  I want to ensure that a certain number of things and then have another procedure for you and explain once I get an answer from you on the above.

  Thank you

  eidnolb

• Need help with the query using the AVG function

  First post here.
  I am a student taking a SQL class and I can't find a query.
  I think I'm close to get it, but I can not quite all the way there.
  
  Three tables are involved in this problem. Here is a list of the tables and the areas concerned:

  orders table:
    order#
    shipstate
  
  orderitems table:
    order#
    isbn
    quantity         (How many copies of book purchased on that order)
  
  books table:
    isbn
    retail    (retail price of book)

  Problem:
  I want to get an average of "total amount" by shipstate.
  
  For example, in these tables, there are 8 records of the State of Florida.
  However, there are only 5 unique order # for this State.
  The amount of detail * quantity for these 8 disks (or 5 orders) is $345,10
  Now to get my average $345,10 should be divided by 5. (number of unique commands)
  In the following query it divides this $345,10 8. (number of records)
  
  How to make this request to divide by the number of unique order # rather than the number of records?

  SELECT shipstate, AVG(quantity * retail)
  FROM orders JOIN orderitems USING (order#)
  JOIN books USING (isbn)
  GROUP BY shipstate
  HAVING SUM(quantity * retail) =ANY
                                (SELECT SUM(quantity * retail)
                                  FROM books JOIN orderitems USING (isbn)
                                  JOIN orders USING (order#)
                                  GROUP BY shipstate) 

  According to me, once I get this part down, I can understand the rest of the problem.
  The end result, I need, is to find all the individual commands that have a "total amount due" that is greater than the 'average amount due' for this state of clients.
  
  Any help, suggestions or comments welcome.
  Matt

  Your average take into account the shipstate (8 disks), you can do that for the expected results.
  With some examples of input data it would be easier, but here a try:

  SELECT shipstate, sum(quantity * retail)/count(distinct order#)
  FROM orders JOIN orderitems USING (order#)
  JOIN books USING (isbn)
  GROUP BY shipstate;
  

  Nicolas.

  delete the alias
  Edited by: N. Gasparotto on October 3, 2008 19:28

• Need help with network adapter WLAN which disappears

  802.11n WLAN driver adapt
  Lenovo IdeaCentre q150 10053
  Win 7 Home premium

  Some how I screwed up my computer.  Long story short, wireless network adapter disappeared as an option, so I downloaded the drivers for a USB key.  Run the wizard, but I always get an error saying that the adapter is missing the drivers.

  Any suggestions to fix this?

  Thank you
  Van

  Hello

  Have you made changes before the start of this issue?
  See the link below to troubleshoot the network adapter.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  For reference:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   
  I hope this helps.

• Need help with network inside and outside Transmittion script

  Hi, I have a problem in my script. I would get Vm net.received.average and net.transmitted.average. Somewhere, it displays the empty output for me, can I have a sample of script on obtaining transmittion of network for 7 days

  My script:

  $report = @ (get - Vm = $vms). where {$_.} PowerState - eq "Receptor"} $lastWeek = (get-date). AddDays(-7) foreach ($vm in $vms) {$vmNet = "" |} Select VmName, NetworkReceive, NetworkTransmit $statReceive is Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.received.average stat. Group-object - property Instance $statTrans = Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.transmitted.average stat. {Group-object - property Forum $vmNet.VmName = $vm.name $vmNet.NetworkReceive = "{0: F2}" f $statReceive.value $vmNet.NetworkTransmit = "{0: F2}" f $statTrans.value $report += $vmNet} $report | Select VmName, NetworkReceive, NetworkTransmit | Export-csv "c:\q33.csv".
  Thank you

  Both are related to the use of aggregation running on your vCenter

  Historical data interval 4 are grouped once a day, and on your vCenter this SQL task seems to be planned at 08:00.

  That is why the time stamp.

  Statistical data are aggregated to one historical interval to another.

  Since ask us the historical interval 4 (with the IntervalMins parameter), the aggregagtion to this historical interval is not yet made.

  This is why the last day 2 are not present in the report.

  You can play with the - Start and - finishing settings to have a period of 7 days which is at least two days yet at the time.

  $report = @()
  $metrics = "net.received.average","net.transmitted.average"
  $vms = Get-Vm | where {$_.PowerState -eq "PoweredOn"}
  $start = (get-date).AddDays(-7)
  $finish = $start.AddDays(7)
  
  Get-Stat -IntervalMins 1440 -Entity ($vms) -start $start -finish $finish -stat $metrics -Instance "" | `  Group-Object -Property Timestamp,EntityId | %{
      $vmNet = ""| Select VmName, Timestamp, NetworkReceive, NetworkTransmit
      $vmNet.VmName = $_.Group[0].Entity.Name
      $vmNet.Timestamp = $_.Group[0].Timestamp
      $vmNet.NetworkReceive = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.received.average"} | Measure-Object -Property Value -Sum).Sum)
      $vmNet.NetworkTransmit = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.transmitted.average"} | Measure-Object -Property Value -Sum).Sum)
      $report += $vmNet}
  $report | Export-csv "c:\q33.csv" -NoTypeInformation -UseCulture
  

• Need help with network Test lab configuration

  I have the Setup VLANS on Cisco switch (4506) and I put aside in ESX (3.5) in its own switch port, but I'm not able to get the systems on this switch to connect.  They seem not to see each other even if they are on the same subnet and the same vlan.  Ideas?

  Looks like it's maybe a configuration problem of VLAN.  On the Cisco switch is the port connected to the network test card NETWORK set up as a trunk port?  If you want to make sure it has 400 VLAN assigned to the trunk.  If it is not defined as a trunk port, you must remove the tag VLAN from your virtual switch.  If the port of Cisco is not defined as a trunk, then the Cisco switch sends tags VLAN to the vSwitch and the vSwitch is looking for packets marked as 400 and not something else by the way to the virtual machine.  Either the trunk or the vSwitch VLAN parameter will be changed to solve the communication.

  If the end goal is to have several VIRTUAL networks appear on network vSwitch test then I'd go the route set port of Cisco to the trunk.  If you just want a VLAN to appear on the vSwitch test then I would keep the port Cisco defined how it is assigned to 400 VLANS and delete reference VLAN of the vSwitch.

  Hope this helps, please give points if it was useful.

• Need help with the query using the aggregation

  If I have a table, defined as follows:
  
  CREATE TABLE range_test
  (
  range_id NUMBER (20) NOT NULL,
  rank of char (1) NOT NULL,
  lower_bound_of_range NUMBER (5.2) NOT NULL,
  upper_bound_of_range NUMBER (5.2) NOT NULL,
  received_date_time_stamp SYSTIMESTAMP NOT NULL DEFAULT TIMESTAMP
  );
  
  And I wanted to query the table to find the range associated with the last line inserted for each 'class' (for example 'A', 'B', 'C', etc.), how would I go about this?
  
  I want something like the following, but I know that it will not work right:
  
  SELECT
  grade,
  lower_bounding_of_range,
  upper_bounding_of_range,
  Max (received_date_time_stamp)
  Of
  range_test GROUP BY received_date_time_stamp;
  
  Thanks for your help... I am frustrated with this one and I think that it should be possible without having to use the PL/SQL (i.e. the functions of SQL aggregation or subqueries should work).

  Perhaps something along the lines of...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select deptno, empno, ename, hiredate
    2  from emp
    3* order by deptno, empno
  SQL> /
  
      DEPTNO      EMPNO ENAME      HIREDATE
  ---------- ---------- ---------- --------------------
          10       7782 CLARK      09-JUN-1981 00:00:00
          10       7839 KING       17-NOV-1981 00:00:00
          10       7934 MILLER     23-JAN-1982 00:00:00
          20       7369 SMITH      17-DEC-1980 00:00:00
          20       7566 JONES      02-APR-1981 00:00:00
          20       7788 SCOTT      19-APR-1987 00:00:00
          20       7876 ADAMS      23-MAY-1987 00:00:00
          20       7902 FORD       03-DEC-1981 00:00:00
          30       7499 ALLEN      20-FEB-1981 00:00:00
          30       7521 WARD       22-FEB-1981 00:00:00
          30       7654 MARTIN     28-SEP-1981 00:00:00
          30       7698 BLAKE      01-MAY-1981 00:00:00
          30       7844 TURNER     08-SEP-1981 00:00:00
          30       7900 JAMES      03-DEC-1981 00:00:00
  
  14 rows selected.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  select deptno, empno, ename, hiredate
    2  from (
    3        select deptno, empno, ename, hiredate
    4              ,row_number() over (partition by deptno order by hiredate desc) as rn
    5        from emp
    6       )
    7  where rn = 1
    8* order by deptno, empno
  SQL> /
  
      DEPTNO      EMPNO ENAME      HIREDATE
  ---------- ---------- ---------- --------------------
          10       7934 MILLER     23-JAN-1982 00:00:00
          20       7876 ADAMS      23-MAY-1987 00:00:00
          30       7900 JAMES      03-DEC-1981 00:00:00
  
  SQL>
  

• Ahhh need help with numbers - too use to Excel!

  Hello

  I am very new to numbers. I have a spreadsheet and a column, I have the following:-

  AB071602 then below I have AB071604 and so on - I have to do is to change the 07 to the 08 and 16 and 17 on each cell, more than 200. I know there is a way to do this with a formula in excel, but I'm not sure about numbers? I don't want to sit and manually change each cell.

  I also have all these numbers in another column and have a .jpeg at the end of each of them, once again, I'm sure there must be a formula to add it automatically.

  Can someone help me?

  Thank you in advance.

  Assuming you have something like this:

  

  You can create the file name replacing "0817" "0716" and adding ".jpg" at the end.

  the id of the original photo is in column A and the name of the update file is in column B (in this example.

  B2 = SUBSTITUTE (A2, "0716", "0817") & ".jpg".

  It is a shortcut to select cell B2 and type (or copy and paste it here) the formula:

  = SUBSTITUTE(A2, "0716", "0817") & ".jpg".

  to fill down, select cell B2, copy

  Select the cells B2 at the end of column B (or), and then paste

• Need help with network controller update

  It seems that my controller network and PCI simple Communications controller are not installed. Can someone give me a link to install it please?
  My material, I would
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello:

  You need this driver for your laptop wireless card.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_102577_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  See if this driver works for the PCI Simple:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=4095873 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118167_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Need help with network drivers

  OK, so I was on win 7 trying to dual boot with Ubuntu when my os disappeared, so I installed Linux Mint and downloaded win 7 on that I then did a boot able USB and installed it via that he started toward the top and then I got an error saying no connection and no connection available even when I plugged it in via a cable Ethernet and it still does not work I tried to install some drivers intell another question, but it did not work I am running a NE56R of the entrance door if it help thank you!

  Install the drivers for your product from the link below.

  NE56R

  http://us.gateway.com/GW/en/us/content/drivers-downloads

• 4540 proBook s product ID C9K7O: I need help with network controller driver installation.

  I had to install Windows 7 Premium 64-bit operating system and the network controller was not recognized and therefore, the drivers were not installed. That's what I see in Device Manager:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  
  PCI\VEN_168C & DEV_0032 & CC_028000
  
  PCI\VEN_168C & DEV_0032 & CC_0280

  I got a driver to download from technical support, but that it does not recognize the controller either. Reference case # (deleted content)

  Dad.

  Have you tried this one?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456 & swItemId = ob_128686_1 & swEnvOid = 4059

  REO

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• need help with my screen has been using mouse and the screen is smaller and smaller

  need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

  Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

• No support for pse4, don't need help with aid and all the rest. What is a layer? How can I get help PDF from CD? I don't have any idea how to use it. I have a Macbook pro.

  Need help with using pse4 not taken in charge by adobe. How subjects do not available and I have never used something like that. Aide said there is a download but have not been able to do. What is a rookie to do? Y at - it somewhere that I can go to learn how to use PSE4?

  To find out how your problem:

  http://kb2.Adobe.com/CPS/402/kb402107.html

  To get help from the CD files you double-click in the finder, go to PDF help and drag it to the desktop or elsewhere.