Need help with problems of performance with 14 elements

I scanned the forums and provided below to help with feedback. At this point, the organizer of the elements is unusable for me - I'm looking for suggestions to help refine the installer to make it usable.

MY SETUP

  • Just more than 50000 items in the catalog, about 95% of them are photos, videos of rest. 98% of the source files are on a drive to the server in my house, with a gigabit connection.
  • I left full recognition of faces (took two days!) and Yes, during that who was running the organizer was unusable.
  • My PC is an i7 - 4790 k with 16 GB of RAM. Windows Pro 10. Boot drive is SSD.

THE SCENARIO

I have a new series of images on my C drive local - images that I scanned, about 30 pictures. Using the view of the pane left records that I navigate to the folder on my C drive. If I move to the tab places it takes about 25 seconds to react and make enforcement appear the places page. If I then go to the people tab it takes about 75 seconds, for the application to respond. In both cases, the application is completely insensitive during the wait.

Clearly, I can't clean my collection with this kind of response. So here are my questions:

  1. What are the key strategies to improve performance, given my configuration?
  2. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  3. Broken content is to catalog help with questions like this? Is there another internal setting, I should be updated or change?
  4. Given the number of images should I use Lightroom instead?

The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

Thanks to everyone for their help.

Mark

mgill2012 wrote:

.........

Thanks to everyone for their help.

Mark

Mark,

I can't offer a positive solution to your problem, but I hope to give you some answers or thoughts on this subject.

Let's start with the description of your case: it's a perfect description of what has been reported in several positions:

-powerful Installer (computer, SSD)

-l' use of the recognition of people and/or geolocation

-use of a NAS for the library.

-Library of more than 50,000 points.

-very long indexing, then extremely slow.

I do not use a SSD (will probably later) or a NAS (I never do). I 65 000 objects and don't care about recognition of face or geolocation, which explains that with a basic setup on I3, 8 GB of RAM, I have an organizing extremely fast speed. Even on an old secondary computer with Vista, it is still quite manageable.

Your choice is typical of advanced specialists and competent (I guess that less than 1% of the current user of items based). I have yet to see no answer (satisfactory or not...) Adobe staff.

Given the number of images should I use Lightroom instead?

I guess that's what Adobe could answer you... and that would be wise. You can use a trial version to make your choice and do a search on the forum for Lightroom. I have not seen similar, even if complaints with NASs, it seems to be a lot to say. Lightroom can convert your organizing catalogs (maybe some problems lately...)

The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

If the use of the network is primarily to ensure maximum security (for not sharing images), why not would you use the choice to store your library on your computer (internal or external disk) with a sync to your NAS as a backup solution? I can tell you that my workflow includes Windows Synctoy to record each session easily and quickly (catalogs and libraries).

Your very precise description of the case call to assess each factor of different performance individually. Even if the method above is not the final answer, it could shed light on the influence of the use of the network.

  1. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  2. Broken content is to catalog help with questions like this?

Splitting the catalog is usually a very bad solution, a number of post seems to show that with the recognition of the people/geotagging, the problems around the range of 50,000 points. You can make a copy of the catalog and remove half of the files to check the influence of numbers point; Maybe it's possible with version 14 (deletion is extremely slow, but worked for me, even if it failed with older versions).

Is there another internal setting, I should be updated or change?

Sorry, I can't help you there...

Other factors are using recognition Geotagging and people. Even if you absolutely need those features, disable to see their influence could help Adobe to solve performance issues.

Tags: Photoshop

Similar Questions

  • Need help with Photoshop elements 11 download

    Just bought a download for Photoshop elements 11 card, created an account, registered the card, got a serial number. And now there is no screen to download, or guests to guide me to the next step of the download of the product. What is the problem and what should I do? New PC with windows 7.

    You can download a trial version and activate with your serial number if you follow all the steps from 7: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm

    If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  • I need help with a problem of file softdub.dll any answers or how to replace it?

    I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

    Hello

    Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

    If you don't have anything done, see if this information helps you.

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

    http://support.Apple.com/kb/HT1923

    If the advice already given does not, please contact Apple for assistance.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

    Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

    I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

    Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

    good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

    If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

    Drivers:

    Chipset Intel, (install and reboot before other drivers) here

    Intel Matrix Storage Manager here

    MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

    MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

    NVIDIA GeForce 9600GT here

     

    Intel Wireless 5100 here

    Bluetooth here

    Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

    Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

    IDT High-Definition Audio CODEC Pilot,

    1 sp41693, pilot, work reported in XP here view

    2 SP39671, driver, jobs reported in XP here or here view

    3 sp41698, vista, work reported in here XP driver

    High-Definition Audio (HDA) Modem Installer and driver here

    .NET framework (required before HP Quick Lunch Buttons) here

    HP Quick Launch buttons here

    Synaptic Touchpad here S

    ENE CIR (infrared receiver) here (your Vista driver)

    JMB38X card reader Host Controller Driver here

    HP 3D DriveGuard 1.10 has here

    If you had for 7 unknown devices (buttons drivers), here

    Do a manual installation

    Go to Device Manager, right click on the unknown device,

    Choose update driver, not to communicate.

    Choose the install from a list or a specific location, not search, have-disk,

    Navigate to the location of machine.inf.

    Do it for the rest of the unknown devices

  • Need help with screen Blus of death (BSOD) on my computer toshiba laptop

    Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

    If someone could point me in the direction of a few possible ways to get this problem.

    guys do you propose I make to the store and see if they can check it out, what would I need if I did.

    I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

    im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

    -leoknighted

    PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

    Hello

    I suggest you to refer to this article to check if this help.

     

    Resolve stop (blue screen) error in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

     

    Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

     

    Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

    Let us know if you need help with this question, we will be happy to offer you our help.

  • Need help with the data storage store, local array and network connections

    Need help with my ESXi 4.1 installation

    My hardware:

    I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

    The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

    I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

    My Situation:

    I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

    Help with the data store and network:

    I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

    I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

    Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

    I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

    Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

    You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

    Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

    RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

    You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

    Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

    UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    Hello
    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    [JAVASCRIPT APPLICATION]
    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • I need help with an installation failure to interpret and troubleshoot a Setup log.

    Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

    Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

    According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

    Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

    https://discussions.Apple.com/message/26309669#26309669

    I used this method with success to install FCS2 in Yosemite:

    [click on images to enlarge]

    However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

    First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

    Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

    If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

    It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

    Here is the post on MacRumors with pre-installed Setup log:

    http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

  • Need help with network home using Airport extreme

    I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

    Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

    My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

    Any help you can provide would be great.

    I would like to get the return tech to help you to...

    But it is likely that something (or someone) has tampered with the settings.

    The layout is fine... but you can cause problems with the network by creating a loop.

    This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

    Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

    Unplug the two AE you have that function as extensions...

    Turning off everything else... then it works again...

    Do it in this order.

    Modem... Wait 2 min

    AE... Wait 2 min

    Switch.

    Now check that the network is working properly... power of customers in various locations and make sure everything is good.

    If so, then manually reset the two AE of factory and redo their installation.

  • Need help with my Y40-80? power management

    I get message to the center of the Action as follows:

    Compatibility problem between your power management system and Windows

    Your power management system is not compatible with this version of Windows.

    The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

    Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

    Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

    [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

    I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

    Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

    I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

  • I still need help with a thumbnail view in video files Real Player XP sp 3

    I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

    You will need to contact the support of Real Player, since the problem occurred with their program.

  • I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

    need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

    Hello

    (1) what is the complete error message you receive?

    (2) when exactly you get this error message?

    (3) how long have you been faced with this problem?

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    See the article below

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520

  • Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

    Hello

    Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

    Hi ErikLee,

    Do you have MS Outlook installed on your computer?

    Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
    If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

    Follow the instructions below and check if the problem is resolved.

    1. reboot your computer, and then start Windows Mail.
    2. on the Tools menu, click Options.
    3. in the connection tab, click on edit to open the Internet Properties dialog box.
    4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
    5. click OK again to close the Options dialog box.
    6. exit Windows mail and restart Windows mail.

    If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

    To download Windows Live Mail, visit the following Microsoft Web site:
    http://get.live.com/wlmail/overview

    For more information about Windows Live Mail, see the Microsoft Web site at the following address:
    http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

Maybe you are looking for

  • Satellite L775-11N - Uprgade Windows 10 - FN key problem

    Hi all, I have a Toshiba Satellite L775 11N and after upgrading to windows 10, the fn key is still active. I have to press fn key and the SPACE to make a place in the text. It's a big prob! I already go to bios (no option for the fn key), update all

  • Motorola Droid RAZR M: Motocare is 33 GB?

    Hi all, I really hope you can help out me. I got my RAZR m a month ago and everything has been fine until last night. I started to receive notifications that I was running out of memory, so I deleted a few things and had a little more than 1 GB free

  • TVSU 5 on Win7 T61p SP1

    Hello all Experts; I am testing Win7 SP1 on a T61p 6458 series. Using VMWare Player. When you attempt to run the TVSU error message "there is no update for your system package" occurs. It stops at 17% in the phase of the online help. I checked on the

  • Flow: C:\hp\Hardware\browser\Default\IE.reg

    C:\hp\HPQWare\browser\Default\IE.reg This file has been reported as a virus by AV360 is anyone knows if this is the case, or is this a false positive?

  • HP 8750 leaves streaks each 3 inches

    Hello I have a HP Photosmart 8750 large-format printer that I had problems with during some time now.  When I print anything, regardless of the size, colour/black & white, or the type of paper the printer leaves streaks every 3 inches.  These trails