Need help with screen Blus of death (BSOD) on my computer toshiba laptop

Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

If someone could point me in the direction of a few possible ways to get this problem.

guys do you propose I make to the store and see if they can check it out, what would I need if I did.

I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.


PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.


I suggest you to refer to this article to check if this help.


Resolve stop (blue screen) error in Windows 7

Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.


Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.


Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

Let us know if you need help with this question, we will be happy to offer you our help.

Tags: Windows

Similar Questions

  • Need help with deleting/closing 63 process running on the computer always?


    Hello jacquelinek1104,

    Below, I've added a link with another similar to your question.  Hope this helps you.

    Microsoft Answers:

    Thank you


  • Need help with Server installation of files open in my computer

    Hi all

    Give it IM new to open. I would like to install openfiler where I can configure my SAN. I found that there is some software that I have to download openfiler as openfiler - 2.3 - x 86 .iso, openfiler-2.3-x86.esx.tar.gz,group-openfiler-2.3-x86.ccs,openfiler-2.3-x86.vmware.tar.gz.

    My question is what do I have to download all these software for installation and after installation iso file which use it. tar.gz files.  It would be useful if someone advise me or someone send me a useful link to this.

    Openfiler / password is the default password

    try to connect with that and let us know.

    I was able to create the installation disk.  Install and while openfiler rose add a 50 GB disc and had openfiler detect it.

  • NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

    NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

    Hi BSRC$, in stock

    1. You have security software installed on the computer?
    2. You receive an error message when you restart the computer?

    Reinstalling Windows XP to the factory setting would not be the first option.

    It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

    I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

    How to remove Windows XP Service Pack 3 from your computer

    Steps to take before you install Windows XP Service Pack 3

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.


    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    b. perform a disk check.
    How to perform disk error checking in Windows XP

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup

    I hope this helps.

  • need help with my screen has been using mouse and the screen is smaller and smaller

    need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

    Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

  • Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    I don't know why vista windows no longer charge, or when the files and folders disappeared

    How Windows Defender is on this problem?

    Follow these steps to try to solve your problems of boot.



    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.



    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    ISO Burner:

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.


    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:


    Download/save the file Knoppix Live CD ISO above.


    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.


    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Need help with Windows 7 key.

    I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

    The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

    Need help please.

    You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

    How to change Windows 7 product key

  • Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

    Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

    I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

    Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

    good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

    If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.


    Chipset Intel, (install and reboot before other drivers) here

    Intel Matrix Storage Manager here

    MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

    MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

    NVIDIA GeForce 9600GT here


    Intel Wireless 5100 here

    Bluetooth here

    Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

    Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

    IDT High-Definition Audio CODEC Pilot,

    1 sp41693, pilot, work reported in XP here view

    2 SP39671, driver, jobs reported in XP here or here view

    3 sp41698, vista, work reported in here XP driver

    High-Definition Audio (HDA) Modem Installer and driver here

    .NET framework (required before HP Quick Lunch Buttons) here

    HP Quick Launch buttons here

    Synaptic Touchpad here S

    ENE CIR (infrared receiver) here (your Vista driver)

    JMB38X card reader Host Controller Driver here

    HP 3D DriveGuard 1.10 has here

    If you had for 7 unknown devices (buttons drivers), here

    Do a manual installation

    Go to Device Manager, right click on the unknown device,

    Choose update driver, not to communicate.

    Choose the install from a list or a specific location, not search, have-disk,

    Navigate to the location of machine.inf.

    Do it for the rest of the unknown devices

  • Need help with mobile layout

    Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

    current version (6_2)

    Try to match these mobile Office layouts

    On the mobile version:

    -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

    I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

    Thanks in advance!

    TheOriginal150mph wrote:

    Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

    current version (6_2)

    Try to match thesemobile Officelayouts     

    On the mobile version:

    -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

    Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

    .main-nav a {}

    display: block;

    text-decoration: none;

    / * padding-bottom: 15px;   */

    Padding: 12px 0;


    Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

    .product-image {}

    float: none;

    Width: 50%;

    margin: 0 auto 20px auto;


    As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

  • Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

    Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

    Thanks for your time

    Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  • whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

    whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

    It's a broken screen classic, easily corrected profile

    See this thread:

  • IM needing help with my workspace of Photoshop 10...

    IM needing help with my workspace of Photoshop 10... I can't zoom in as much as I used to and it is difficult to work on my projects. Ive already placed my ruler in inches, but my image is enlarged on the screen.

    This window is only 3 hundredths of a 4 hundredths of an inch each way. It's as good as it gets for zoom for something of this size.

  • Need help with video scrolling


    I need help with a project. Subsequently, I want is that a webcam controls the position of the mouse and the mouse position

    control of a video. But I would like the part where the mouse position controls the video.

    So, if the mouse is on the left on your screen, the video will be on the first image and when you move, you're the mouse for

    the right to the video play as a result traffic. and stop when the mouse is completely right.

    Effectivly the scrolles from the mouse through the video. It must be on the x-axis.

    I'm not that formilliar with flash, so any help would be great



    what you need to do, is to designate a rectangle where users can use their mouse to scroll through the video.  If this rectangle has instance name bar, you can use:

    var m, b:Number;

    var lastSeek:int = getTimer();

    flv_pb.addEventListener (MetadataEvent.METADATA_RECEIVED, f);

    bar.addEventListener (MouseEvent.MOUSE_MOVE, moveF);

    function f(e:MetadataEvent):void {}

    paramF (0,0,stage.stageWidth,;


    function moveF(e:MouseEvent):void {}

    {if (getTimer () - lastSeek > 1000)}

    flv_pb. Seek(m*e.stageX+b);

    lastSeek = getTimer();

    flv_pb. Play();



    function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}

    m = (y2 - y1) / (x 1 - x 2);

    b = y1 - m * x 1;


Maybe you are looking for