Need help with search 1 d table

Similar Questions

• Need help with search for mdb using DW in ASP.

  Hello

  I'm trying to put in place a db on a Web site search tool using mdb and dw in ASP. have THEY put in place. Tested OK. Have used ms help pages (printed some) and the DW 8 missing manual to:

  Configure and test a connection string to a database and it is fine.

  Set up to search with a single parameter and it tests OK.

  Configure the results page and it tests OK too.

  I can display the search page and the results page by using the toolbar search engine address and local host by IIS installation and this is very good.

  Unfortunately, when I test the search page and use a proper search for the db password, the results page displays very well with the titles of the table, but no data. I am highly dependent on the ease of DW and I'm not much on the code.

  I tried a lot of different things, but there are so many possibilities! I tried GET and POST. I think that the problem is either in the original report send the form data to the server, the mdb data collection or data display in the final table, although it's conjecture. It covers almost all areas. Also I don't know if "repeat" in the table may have something to do with it.

  If anyone can help me with some general ideas on how I can be able to go forward. I was at this point for about a week.

  Thank you very much in anticipation

  OK, you're text field is named "textfield", but the query string you are testing for is called "search". They must be named the same.

  " size="30">

  rsSearch__MMColParam = Request.QueryString ("search")

  I don't know why you are populating the form field with a value of query string. The value does not exist because there is no field named "search". And the sending of the form (EEG) is what creates the query string that uses the results page.

  Rename the textfield object in your 'Search' form and it should work.

• Need help with a global temporary table

  Can someone please help, the following line of code:
  
  CREATE TEMPORARY TABLE global tbl_bulknodes_temp (obt_uuid VARCHAR2) ON COMMIT DELETE ROWS
  
  Yeilds the following error running in SQL and PL/SQL
  
  Error from the 1 in the command line:
  CREATE TEMPORARY TABLE global tbl_bulknodes_temp (obt_uuid VARCHAR2) ON COMMIT DELETE ROWS
  Error report:
  SQL error: ORA-00906: lack of left parenthesis

  Hello

  You need the length of varchar2 column...

  SQL> CREATE GLOBAL TEMPORARY TABLE tbl_bulknodes_temp ( obt_uuid VARCHAR2(30) ) ON COMMIT DELETE ROWS;
  
  Table created
  
  SQL> CREATE GLOBAL TEMPORARY TABLE tbl_bulknodes_temp2 ( obt_uuid VARCHAR2 ) ON COMMIT DELETE ROWS;
  
  CREATE GLOBAL TEMPORARY TABLE tbl_bulknodes_temp2 ( obt_uuid VARCHAR2 ) ON COMMIT DELETE ROWS
  
  ORA-00906: missing left parenthesis
  
  SQL> 
  

  Kind regards

• Need help with the Oracle error table

  Hello
  
  I'm procedures for migration from SQL server to Oracle.
  
  In SQL server there is a reference to the table * master.dbo.sysmessages * is there any table in oracle, which equals master.dbo.sysmessages table of SQL server.
  
  Thanks in advance.

  Hello

  In sql server, the view is not containing error details.., I think that there is no such a table in oracle... To do this use the SQLERRM function in oracle...

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• * Need help with importing partial data of RDBMS table NHI repository *.

  Hello
  
  I need help to import the partial table RDBMS data, I tried the content in the logical source but still show me all the data available in the database.
  
  The table contains the partitioned data for which I want to only import single partion according to the partion of function value.
  
  IE contry = 'Fr '.
  
  Thanks in advance.
  
  See you soon,.
  Rajeev

  One possibility is to do the filtering on the physical level itself. You could use a physical table of type 'Select' and filter the data.

  Thank you!

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Need help with SQL/PL/SQL for Dates

  Hi Experts - need help with a SQL query.

  I need to insert some date fields in a table called CALENDAR_PERIOD.

  Current data in CALENDAR_PERIOD table with their data types:

  STARTPERIOD (DATE) YEAR (NUMBER) PERIOD_LABEL (Varchar2 255)

  02/11/2014 2014 2014/02/11 SUN

  03/11/2014 2014 14/03/11 MON

  04/11/2014 2014 11/04/14 MAR

  I have to increment above values up to the year 2025. I don't know how to write SQL and increment of these values.

  Ex: My next value should insert: 05/11/2015 2014 11/05/14 WED like that I need to insert data until 12 31, 2025.

  Can you please help me with PL/SQL block?

  Really appreciate your help!

  DB version:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Thank you
  Sandy

  Hello Sandy,

  Maybe something like

  INSERT INTO calendar_period (startperiod, year, period_label)

  SELECT DATE '' 2014-11-04 + LEVEL

  , TO_NUMBER (TO_CHAR (DATE '' 2014-11-04 + LEVEL, "YYYY"))

  , TO_CHAR (DATE '' 2014-11-04 + LEVEL, "MM/DD/YY DY")

  OF the double

  CONNECT BY LEVEL<= date="" '2025-12-314="" -="" date="">

  ;

  ((mais je ne comprends pas pourquoi nous créons une telle table "année" et "period_label" peuvent être calculé à partir de startperiod))

  Best regards

  Bruno Vroman.

• Need help with a query result

  Oracle Version: 11.2.0.2.0

  I need assistance with the output of the query. Here is the table.

  With Tbl_Nm as

  (

  Select 'ABC1' SYSTEM_ID, REGION 'US', 'CHI' SUB_REGION 4000 BALANCE, to_date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') LAST_UPD_TIME, 'A' FLAG of union double all the

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select * from tbl_nm

  I need the output below.

  PQR2 UK MC 2600 1 OCTOBER 2012 04:45

  ABC1 US NY 3500 October 1, 2012 06:45

  LMN3 UK BT 2500 November 1, 2012 07:45

  The need the disc according to this system_id flagged as "A". But if the last disc of 'd' then it must show that the amount, but the file should be displayed in 'A '.

  I've tried a few and got stuck. Help, please. Not able to get a balance '.

  This question is a bit similar to needing help with a query result

  With Tbl_Nm as

  (

  Select 'ABC1' System_Id, region 'US', 'CHI' Sub_Region, 4000 balance, To_Date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') Last_Upd_Time, 'A' flag of double Union All

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select System_Id, region, Sub_Region, Balance, Last_Upd_Time of Tbl_Nm T1

  where t1. Last_Upd_Time = (select max (Last_Upd_Time) in the Tbl_Nm T2 where T1.) SYSTEM_ID = T2. SYSTEM_ID)

  So maybe you'd then

  ORDER BY DECODE(flag,'D',9,1) ASC...

  to get the Ds at the end of the list.

  or

  ORDER BY CASE WHAT flag = has ' (your other filters) AND then 9 or 1 end CSA,...

  HTH

• Need help with a SQL query

  Hello

  I have a data in table (raj_table) with columns (char11) raj_id, raj_number (varchar2 (15)), raj_format (NUMBER), Primary_ID (identity with the values of the primary key column)

  Primary_ID raj_id Raj_number Raj_format

  1                            raj                 rajvend                      1

  2                            raj                 rajvend                      1

  3                            raj                 rajvendor1                 2

  4                            raj                 rajvendor1                 2

  5                            raj                 rajvendor1                 2

  6                            raj                 rajvendor2                 3

  I used under SQL to get query output as below, but has not achieved the required result:

  Select client_id vendor_number, vendor_format, primary_id, row_number() on sl_no (client_id partition, primary_id, vendor_format order of client_id primary_id, vendor_format, vendor_number, vendor_number)

  from raj_table by sl_no asc

  SL_NO raj_id raj_number raj_format primary_id

  1                   1                   raj              rajvendor                 1

  1                   2                  raj              rajvendor                 1

  2                   3                   raj              rajvendor1                2

  2                   4                   raj              rajvendor1                2

  2                   5                  raj               rajvendor1                2

  3                   6                    raj              rajvendor2                3

  I need help with a SQL query to get the result as above without using the group by clause. I want to bring together the combination of separate line of the three columns (raj_id, raj_number, raj_format) and add a unique serial number for each online game (SL_NO column below). So, above there are 3 unique set of (raj_id, raj_number, raj_format) I can get in a group by clause, but I can not add prmiary_id, SL_NO values if I group by clause. I used the analytical functions like row_number() but no luck. Need solution for this.

  with t as)

  Select 'raj' raj_id, 'rajvend' raj_number, 1 raj_format, 1 primary_id Union double all the

  Select option 2, 'raj', 'rajvend', 1 double Union all

  Select 3, 'raj', 'rajvendor1', 2 double Union all

  Select 4, 'raj', 'rajvendor1', 2 double Union all

  Select 5, 'raj', 'rajvendor1', 2 double Union all

  Select 6, 'raj', 'rajvendor2', 3 double

  )

  Select dense_rank() over (order of raj_id, raj_number, raj_format) sl_no,

  t.*

  t

  order by primary_id

  /

  PRIMARY_ID RAJ RAJ_NUMBER RAJ_FORMAT SL_NO
  ---------- ---------- --- ---------- ----------
  1 1 raj rajvend 1
  1 2 raj rajvend 1
  2 3 raj rajvendor1 2
  2 4 raj rajvendor1 2
  2 5 raj rajvendor1 2
  3 6 raj rajvendor2 3

  6 selected lines.

  SQL >

  SY.

• Need help with a script (o - o8) *, see the Virgin if there is no

  Hi all what I need help with a script I can't find an example.

  I'm trying to subtract 2 numbers and then multiply this product. (o o8) * one but I just want to do the calculations if all fields have the numbers IE field o, o8 of field and field one.

  Thank you in advance. I was stuck on this days searching the Internet.

  Assuming you want to affect the outcome of this calculation in another text field, use this code as a custom field calculation script:

  var o = this.getField("o").valueAsString;
  var o8 = this.getField("o8").valueAsString;
  var a = this.getField("a").valueAsString;
  if (o!="" && o8!="" && a!="") event.value = (Number(o)-Number(o8))*Number(a);
  else event.value = "";
  

• Need help with the condition join in SQL

  Hi all -
  
  I need to ask for help with this query:
  
  Create table user_tab_col_test (varchar2 (30) from table_name, column_name varchar2 (30), data_type varchar2 (30));
  
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('Column2', 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ("Column3", 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('column4', 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ("column1", "table2", 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column2', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', "Column3", 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column4', 'varchar2')
  Commit;
  
  Create table all_cons_columns_test (varchar2 (30) from table_name, column_name varchar2 (30), constraint_name varchar2 (30))
  
  Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ("table1", "column1", "primary")
  Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ("table1", "column1", "secondary")
  Commit;
  
  This is my query and the current result:
  
  Select u.table_name, u.column_name, c.constraint_name
  Of user_tab_col_test u
  Outer join all_cons_columns_test c left
  On (u.table_name = c.table_name
  AND U.COLUMN_NAME = C.COLUMN_NAME
  AND C.CONSTRAINT_NAME IN ('main'))
  order of U.table_name, U.COLUMN_NAME;
  
  TABLE_NAME COLUMN_NAME, CONSTRAINT_NAME
  ------------------ --------------------- ----------------------------
  Table1 primary Column1
  Table1 Column2
  Table 1 Column3
  Table2 Column1
  Table2 Column2
  
  
  Three questions:
  (1) I don't want to return results where table_name = "table1". I can't get this to work.
  (2) is my proper request and this is the best way to return my desired results? For example, I want all of the columns of user_tab_col_test and I want to only display the constraint_name from all_cons_columns_test argument if the argument constraint_name = 'primary '.
  (3) will be the synatx be the same if I need to join a third table to all_cons_columns_test?
  
  Any advice/suggestions are appreciated-
  John
  
  Published by: user703358 on January 11, 2013 20:57
  
  Published by: user703358 on January 11, 2013 21:48

  Hi, John,.

  user703358 wrote:
  Hi all -

  I need to ask for help with this query:

  Create table user_tab_col_test (varchar2 (30) from table_name, column_name varchar2 (30), data_type varchar2 (30));

  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('Column2', 'table1', 'varchar2')...

  Thanks for posting the CREATE TABLE and INSERT.
  It is more useful if you post the code that can be run without modification. You did not semicolons after INSERTION instructions.

  Three questions:
  (1) I don't want to return results where table_name = "table1". I can't get this to work.

  What have you tried? Post your best attempt.
  Here's one way:

  SELECT    u.table_name
  ,        u.column_name
  ,        c.constraint_name
  FROM             user_tab_col_test      u
  LEFT OUTER JOIN  all_cons_columns_test  c
                          ON    u.table_name     = c.table_name
                 AND   u.column_name     = c.column_name
                 AND   c.constraint_name IN ('primary')
  WHERE       u.table_name     = 'table1'          --  *****  NEW  *****
  ORDER BY  u.table_name
  ,            u.column_name
  ;
  

  You would not put this condition in the clause; who controls what is considered as a match between the tables, and "u LEFT OUTER JOIN c" means show all lines of u, even if they do not have a match in the c.

  (2) is my proper request and this is the best way to return my desired results? For example, I want all of the columns of user_tab_col_test and I want to only display the constraint_name from all_cons_columns_test argument if the argument constraint_name = 'primary '.

  Basically, this application is very well.
  It displays all the columns of user_tab_col_test; missing data_type. Just add u.data_type to the SELECT clause, or change the SELECT clause

  SELECT    u.*
  ,         c.constraint_name
  

  (3) will be the synatx be the same if I need to join a third table to all_cons_columns_test?

  Do you mean "" * add * one-third * column * to all_cons_columns_test '? "
  It depends on what results you want. Post new CREATE TABLE and INSERT and instructions the results you want new data.
  Most likely, the basic structure of what you've written will remain exactly the same.