Need help with set up on PC6624 InterVLAN routing
Hello
I stack 5-switch 5548 Dell PC / 1 PC 6624 switch for layer 3 routing.
I connected battery to PC6624 with 10 GB fiber cable.
I created several VLANs on the layer 2 stack. Now how to set up communication Inter VLAN switch PC 6624?
Concerning
Marion
Hello
Page 507 of the manual explains how to enable IP routing on the switch ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_User%27s%20Guide2_en-us.pdf
Here is a document explaining the Setup on an older switch, the concepts are the same http://www.dell.com/downloads/global/products/pwcnt/en/app_note_38.pdf
Tags: Dell Switches
Similar Questions
-
Need help with setting up in checkbox in interactive reports
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
< input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox
Do I need to configure anything else
Aditya Gupta wrote:
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
instead of the checkbox
Do I need to configure anything else
This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).
Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.
-
I need help to set up the linksys adsl router
Hello world!
I have LINKSYS WIRELESS - N HOME ADSL2 + MODEM ROUTER (wag120n) and I connect to the internet via the cable that I took my friend who already SPEEDTOCH ADSL ROUTER, I bought the d-link wireless card and I install it in one of my PC
what I need is to set up my linksys wireless router for my two PCs, on via the wireless and another an ethernet cable, how can I do?thanks4all
Follow this link to configure the router.
-
Hard drive controller is released on the PC need help with setting up new controller
I have a HP with a built NVidia controller on the mobo. The controller was an error and I am installing an Adaptec 2120SA on the system controller. The computer sees the controller and it tries to start the operating system but has problems it BlueScreens and it blue screens quickly so I do not see the error code. but I think it's because I don't have the drivers of the controller installed in the operating system. I really don't want to reload the workstation. Is it possible to install the drivers of the controller without starting the operating system I tried three other PC and they all have the same questions. as the driver for the controller is not there. The OS is Vista Home Premium 64-bit. The PC is no longer under warranty and a replacement MoBo is too much money.
Thanks in advance for your help.
Hi arjaywolverine,
There is a way that can be attempted to identify the problem and we'll see if it helps.
You need to extract the driver file from hard drive controller on a floppy/flash your motherboard CD drive, and then you restart the computer with the Windows Vista operating system DVD.1. turn on your computer and insert the CD or the DVD of Windows Vista.
2. on the page install Windows, do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
3. click load drivers and it prompts you to insert your floppy disk or USB key.
4. navigate to the correct device and click Ok.Once the drivers are installed correctly, remove the DVD and diskette. Restart the computer and who should do it.
Hope this information is useful.
Karena R - Microsoft Support
--------------------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Need help with setting wrong and impossible to find ways to fix
Hello
I just installed LM and imported photo. However, I might accidentally click on a few buttons and all the picture in the section developing shown like this. They appear with weird colors (color incorrect). I guess that it maybe because of some settings, but I can't understand that one. Please see the example in this picture (has not edited anything yet). Could you suggest how to correct the adjustment? Thank you very much for your help.
Go to Preferences, click the performance tab, and then uncheck the box.
-
All new to APEX and Oracle - need help with setting up email
I have looked at the APEX for a few months now and finally took the plunge. I installed Oracle 11 g enterprise, 4.2 APEX, APEX listener 2.05 and GlassFish 4. Fine surpringly and I did the step "Activate the Oracle 11 g database Network Services" in the installation guide and can connect to the APEX Admin Services page. I'm about to create my first workspace and realized that only to not configure the e-mail for the APEX instance settings still (the SMTP host address, etc.) I wanted to make sure that the admin workspace would have received an email from the system.
I'll do it soon, but my question is what I have to do something else for the instance of the APEX or the database itself to send?
Thanks in advance!
Hello
If you already Activate Network Services for schema of the APEX to access SMTP server, you just need to Configure Email.
If your SMTP server uses SSL/TLS, you must also Configure portfolio and import the certificate to the SMTP server to the wallet.
Kind regards
Jari
-
Need help with Set-VMHostAdvancedConfiguration
Hello
Following commands do not work for some reason any.
Please see the errors of output.
No idea why it does not work?
$value1 = "[$datastorename] $syslogFoldername / $hostname.log.
$value2 = ' [] / scratch/log ".Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "ScratchConfig.ConfiguredScratchLocation" - value $value1
Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "Syslog.global.log.DirUnique" - value $value2Game-VMHostAdvancedConfiguration: 25/02/2013-11:55:51 Set-VMHostAdvancedConfiguration
A specified parameter was not correct.D:\sm\ScratchFolders\folder.ps1:23 char: 33
+ Set VMHostAdvancedConfiguration < < < <-VMHost $vmhost - name ScratchConfig.ConfiguredScratchL «»
apartment"- value $value1
+ CategoryInfo: NotSpecified: (:)) [game-VMHostAdvancedConfiguration], InvalidArgument)
+ FullyQualifiedErrorId: Client20_SystemManagementServiceImpl_GetVmHostAdvancedConfiguration_
ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.SetVMHostAdvancedConfigurationGame-VMHostAdvancedConfiguration: 25/02/2013-11:55:52 Set-VMHostAdvancedConfiguration
"Syslog.global.log.DirUnique" is not valid or exceeds the maximum number of characters allowed.
D:\sm\ScratchFolders\folder.ps1:25 tank: 36
+ Set VMHostAdvancedConfiguration < < < <-VMHost $vmhost - name of the "Syslog.global.log.DirUnique" - will
read $value2
+ CategoryInfo: NotSpecified: (:)) [game-VMHostAdvancedConfiguration], InvalidName)
+ FullyQualifiedErrorId: Client20_SystemManagementServiceImpl_GetVmHostAdvancedConfiguration_
ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.SetVMHostAdvancedConfigurationAs far as I know the 1 config entry should be a path in the local file, something like system "/ vmfs/volumes /...» »
See KB1033696.
For value 2, the key must be "Syslog.global.logDirUnique".
Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "Syslog.global.logDirUnique" - value $value2
-
Need help with setting the value of the variable in the callable statement in the OPS
Hi all
I use a callable statement in my code, I put the value as below.
String updateStmt = "BEGIN TEST_PKG. MAIN_PROCEDURE ("+
":1)" +
"; END; « ;
CallableStatement cstmt is getDBTransaction (.createCallableStatement(updateStmt,1));.
cstmt.setString (1, empRow.getLinenum () m:System.NET.SocketAddress.ToString ());
but the problem is when the value of 1 is NULL, I'm not able to call the procedure, it is not inserting data into the table, but when the value of 1 is not null, it is able to call the procedure and inserting the data correctly.
Please help me urgent.
Hello
Please make changes as below
If (empRow.getLinenum (). ToString ()! = null)
{
String updateStmt = "BEGIN TEST_PKG. MAIN_PROCEDURE ('+': 1) «+»; END; « ;
CallableStatement cstmt is getDBTransaction (.createCallableStatement(updateStmt,1));.
cstmt.setString (1, empRow.getLinenum () m:System.NET.SocketAddress.ToString ());
}
Also check out the link Oracle Application Framework Dilip Articles: education prepared - controller
Thank you
Dilip
-
[10 g/8i] Need help with setting up a query
I have a query that takes about 5 minutes to run, and if there is a way to make it faster, I would like to know. It is not a huge problem, but I get to sleep while waiting for it to end. =)
Here are the results of the explain plan command and the extra stuff generated by autotrace...
I also have the tkprof output, but let's start with that. I have absolutely no idea where to even start looking for something to improve.SQL> show parameter optimizer NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ optimizer_dynamic_sampling integer 2 optimizer_features_enable string 10.2.0.1 optimizer_index_caching integer 0 optimizer_index_cost_adj integer 100 optimizer_mode string ALL_ROWS optimizer_secure_view_merging boolean TRUE SQL> SQL> show parameter db_file_multi NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_file_multiblock_read_count integer 128 SQL> SQL> show parameter db_block_size NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_block_size integer 8192 SQL> SQL> show parameter cursor_sharing NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ cursor_sharing string EXACT SQL> SQL> column sname format a20 SQL> column pname format a20 SQL> column pval2 format a20 SQL> SQL> select 2 sname 3 , pname 4 , pval1 5 , pval2 6 from 7 sys.aux_stats$; SNAME PNAME PVAL1 PVAL2 -------------------- -------------------- ----------- -------------------- SYSSTATS_INFO STATUS COMPLETED SYSSTATS_INFO DSTART 02-07-2006 22:54 SYSSTATS_INFO DSTOP 02-07-2006 22:54 SYSSTATS_INFO FLAGS 1.000 SYSSTATS_MAIN CPUSPEEDNW 500.790 SYSSTATS_MAIN IOSEEKTIM 10.000 SYSSTATS_MAIN IOTFRSPEED 4,096.000 SYSSTATS_MAIN SREADTIM SYSSTATS_MAIN MREADTIM SYSSTATS_MAIN CPUSPEED SYSSTATS_MAIN MBRC SYSSTATS_MAIN MAXTHR SYSSTATS_MAIN SLAVETHR 13 rows selected. Elapsed: 00:00:00.03 SQL> explain plan into plan_table for 2 SELECT CONNECT_BY_ROOT b.parent_part AS part_nbr 3 , b.parent_part 4 , b.child_part 5 , eval_number ('1' || SYS_CONNECT_BY_PATH (b.qty_per, '*')) AS qty 6 FROM ( 7 SELECT doc_nbr AS parent_part 8 , comp_part AS child_part 9 , line_nbr 10 , qty_per 11 FROM bill@DB8I 12 WHERE lst_code IN ('G','M') 13 AND begn_eff <= SYSDATE 14 AND end_eff > SYSDATE 15 AND component_type = 'R' 16 AND doc_type = 'BILL' 17 AND status = 'RL' 18 ) b 19 , part@DB8I p 20 , dual 21 WHERE b.child_part = p.part_nbr 22 START WITH b.parent_part = 'MYPARTNBR' 23 CONNECT BY b.parent_part = PRIOR b.child_part 24 AND PRIOR p.part_type = 'M' 25 ; Explained. Elapsed: 00:00:00.23 SQL> select * from table(dbms_xplan.display); PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Plan hash value: 2565617462 -------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT| -------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | 299 | 519 (14)| 00:00:07 | | | |* 1 | CONNECT BY WITH FILTERING| | | | | | | | |* 2 | FILTER | | | | | | | | | 3 | COUNT | | | | | | | | | 4 | NESTED LOOPS | | 1 | 299 | 519 (14)| 00:00:07 | | | | 5 | NESTED LOOPS | | 1 | 217 | 517 (14)| 00:00:07 | | | | 6 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | 7 | REMOTE | BILL | 1 | 217 | 515 (14)| 00:00:07 | DB8I | R->S | | 8 | REMOTE | PART | 1 | 82 | 2 (0)| 00:00:01 | DB8I | R->S | |* 9 | HASH JOIN | | | | | | | | | 10 | CONNECT BY PUMP | | | | | | | | | 11 | COUNT | | | | | | | | | 12 | NESTED LOOPS | | 1 | 299 | 519 (14)| 00:00:07 | | | | 13 | NESTED LOOPS | | 1 | 217 | 517 (14)| 00:00:07 | | | | 14 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | 15 | REMOTE | BILL | 1 | 217 | 515 (14)| 00:00:07 | DB8I | R->S | | 16 | REMOTE | PART | 1 | 82 | 2 (0)| 00:00:01 | DB8I | R->S | | 17 | COUNT | | | | | | | | | 18 | NESTED LOOPS | | 1 | 299 | 519 (14)| 00:00:07 | | | | 19 | NESTED LOOPS | | 1 | 217 | 517 (14)| 00:00:07 | | | | 20 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | 21 | REMOTE | BILL | 1 | 217 | 515 (14)| 00:00:07 | DB8I | R->S | | 22 | REMOTE | PART | 1 | 82 | 2 (0)| 00:00:01 | DB8I | R->S | -------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter("DOC_NBR"='MYPARTNBR') 2 - filter("DOC_NBR"='MYPARTNBR') 9 - access("DOC_NBR"=NULL AND NULL='M') Remote SQL Information (identified by operation id): ---------------------------------------------------- 7 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 8 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 15 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 16 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 21 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 22 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) ... ... ... Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter("DOC_NBR"='MYPARTNBR') 2 - filter("DOC_NBR"='MYPARTNBR') 9 - access("DOC_NBR"=NULL AND NULL='M') Remote SQL Information (identified by operation id): ---------------------------------------------------- 7 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 8 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 15 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 16 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 21 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 22 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) Statistics ---------------------------------------------------------- 381 recursive calls 1 db block gets 0 consistent gets 0 physical reads 304 redo size 15558 bytes sent via SQL*Net to client 417 bytes received via SQL*Net from client 5 SQL*Net roundtrips to/from client 6 sorts (memory) 0 sorts (disk) 379 rows processed SQL> disconnect Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Performance would be much better if the whole query would be executed on the remote side, but the query uses the local function eval_number as well as parts of the query are executed on the remote side and results are brought alongside local and then only filtering is performed. Try the following:
SELECT part_nbr, parent_part, child_part, eval_number ('1' || path) qty FROM ( SELECT CONNECT_BY_ROOT b.parent_part part_nbr, b.parent_part, b.child_part, SYS_CONNECT_BY_PATH(b.qty_per, '*') path FROM ( SELECT doc_nbr parent_part, comp_part child_part, line_nbr qty_per FROM bill@DB8I WHERE lst_code IN ('G','M') AND begn_eff <= SYSDATE AND end_eff > SYSDATE AND component_type = 'R' AND doc_type = 'BILL' AND status = 'RL' ) b, part@DB8I p WHERE b.child_part = p.part_nbr START WITH b.parent_part = 'MYPARTNBR' CONNECT BY b.parent_part = PRIOR b.child_part AND PRIOR p.part_type = 'M' ) /
SY.
-
Newbie need help with setting up new WebLogic domain
Installed ALBMP for WebLogic Enterprise on a distribution SUSE Linux running on VMWare. Installation completed successfully and works through the configuration of the installation via the Configuration Wizard. I have problems creating a new WebLogic domain. He throws it toward the high "WebLogic invalid Home" when I try to enter any path directory for this field. He won't let me leave this field empty. Can anyone help? I am running version ALBPM 6.0 M3.
Thank you.Which way you give? a valid weblogic House is F:\bea102\wlserver_10.0 under windows. I think that you not include the wlserver directory.
-
need help to set up Linksys printserver with verizon wifi hotspot
need help to set up Linksys printserver with verizon wifi hotspot
pfsjmhall,
Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.
Then configure the Linksys print server. Find your network to give your passkey (password)
Then set up the printer, choose network and follow the instructions.
Rick
-
Need help with the port forwarding for a XBox remote Streaming
I have a router R6200v2 and need help with port forwarding.
I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere
http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/
I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.
Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?
Hi @varxtis,
You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.
1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)
2. Select the type of service (TCP, UDP or both)
3 entry 5050 times a start external Port and external endpoints.
4. Select the IP address of your XBOX.
5. Select apply.
6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.
Kind regards
Dexter
The community team
-
Need help with network home using Airport extreme
I need help with my home network. I'm not very aware when it comes to all things network. Here's how my network is currently set up.
Cable modem to Airport Extreme for Gigabit Switch. Cables come out of the switch to all areas of the House. I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch. I hope I am explaining that properly.
My problem is that this seems to have caused some of my connections cable does not work. When everything is configured, it has worked well. All connections in the House worked. Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage. Since that time, a lot of the ethernet wall plugs are not working. For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.
Any help you can provide would be great.
I would like to get the return tech to help you to...
But it is likely that something (or someone) has tampered with the settings.
The layout is fine... but you can cause problems with the network by creating a loop.
This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.
Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.
Unplug the two AE you have that function as extensions...
Turning off everything else... then it works again...
Do it in this order.
Modem... Wait 2 min
AE... Wait 2 min
Switch.
Now check that the network is working properly... power of customers in various locations and make sure everything is good.
If so, then manually reset the two AE of factory and redo their installation.
-
Need help with my Y40-80? power management
I get message to the center of the Action as follows:
Compatibility problem between your power management system and Windows
Your power management system is not compatible with this version of Windows.
The name of the model of your power management system is ACPI Lenovo compatible virtual controller.
Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you
Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon
-
NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.
Hi BSRC$, in stock
- You have security software installed on the computer?
- You receive an error message when you restart the computer?
Reinstalling Windows XP to the factory setting would not be the first option.
It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.
I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.
How to remove Windows XP Service Pack 3 from your computer
http://support.Microsoft.com/kb/950249
Steps to take before you install Windows XP Service Pack 3
Maybe you are looking for
-
My sidebar has disappeared. How to bring back my sidebar?
My sidebar has disappeared. I can't return by sliding the left margin back. I can't find the answer in the HELP section. I need to be able to switch back between the SENT and Inbox, etc.
-
you know how when you enter a Web site address and click Enter to "go", well, it does not work for me. is this a question from me or firefox? It's making a bad browser firefox for me, and I can't downgrade either. Help me!
-
M30: BIOS password: never put but now ask for a password
I never put my password BIOS before on my laptop Toshiba Satellite M30. However I changed just turn it on and the phone asks me a password. Does anyone know why this is so? I'm not asking how to hack - but I was wondering what the hell!
-
Apple should use Storedot 5 min of full battery dead
I heard that fresh battery in 5 min. apple that need to use the iPhone 7 or something very similar. I would definitely buy it then.
-
I want to Flash my mobile LG-RD6700, but the LG download program 1.3.9.10 does not... My OS is Windows 7... After the opening of the watch LGdownload.exe It (sorry, invalid research environments chain! (HL_SEARCH)).After troubleshooting. Its Applicat