Need help with the Blue error screen.

Similar Questions

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Computer laptop crash with the Blue error screen, locale ID: 4105, BCCode: 4A

  Original title: screen blue Usb_bugcode

  NEED HELP!

  Hello world. Could someone help me please! My phone hangs with the Blue error screen, and it does on a daily basis. I tried to find a solution online but nothing seems to work. Here are the details:

  I have a laptop with Windows 7 Edition Lenovo Home premium (Service pack 1). RAM: 4 GB. 64-bit OS. Intel Core i3-3217U CPU @ 1.80 Ghz

  And here's the problem:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 4105

  More information about the problem:

  BCCode: 4A

  BCP1: 0000000074EC2E09

  BCP2: 0000000000000001

  BCP3: 0000000000000000

  BCP4: FFFFF88002A84B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\043015-13057-01.dmp

  C:\Users\Jimmy\AppData\Local\Temp\WER-855899-0.SysData.XML

  Can you please put step by step directions? I'm not very good with computers, and it's really frustrating! I tried to remove and reinstall the usb drivers but that didn't do anything. I read the other threads on the similar error but couldn't find a solution. Thanks for your support!

  Could this be something to do with a monitor Samsung that I use?

  KD > lmvm sports

  start end module name

  fffff880 '075da000 fffff880' 075e2000 SPORTS (postponed)

  Image path: \? \C:\Windows\system32\Drivers\SSPORT.sys

  Image name: SSPORT.sys

  Timestamp: Fri Aug 12 00:07:32 2005 (42FBDA34)

  Sum: 0000D 894

  ImageSize: 00008000

  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  SSPORT.sys 32-bit Port claim Driver of Samsung Electronics

  Samsung ML-1430 series Samsung ML-1430 series USB001 unavailable

  You need to update or remove a SSPORT.sys. Zig - zag pointed out to you earlier. Please uninstall this printer and related software.

  Type device manager in the search above the Start button box and press ENTER. Find and right-click on the device and click on uninstall from the drop-down list. Restart your computer.

  Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Samsung, right-click and select Uninstall from the menu drop down. Restart your computer.

• need help with the blue screen of death!

  Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

  blue screen:

  Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

  technical information.

  Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

  isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

  then he dumps memory and reboots.

  any help would be full use thank you.

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Need help with the CSS error or incorrect

  HI - hope someone can help me.  I'll put up a mega menu in Dreamweaver and then will export the code of WordPress.  First of all, to get all this work, here's the menu in HTML; I basically just put it all in DW to operate:

  http://designerandpublisher.com/MegaMenu/2/index7.html

  Then, I went to the end back to the WordPress site and pasted the code menu on the inside.  The final result was not working so I got rid of the 'th, one' in the code CSS #mainmenubar and when I did, it's good but the menu text color is green.  I need to do this and only this white text.  Here is a screenshot (I can't show you the actual location because it has restricted):

  

  So I need to do text links in the white bar.  I know it must be a kind of class that I have to do the #mainmenubar and I read up on this subject, but just does not know how to write it to make it work.  Here is the CSS for the menu bar:

  #mainmenubar

  {

  color: #FFFFFF;

  text-decoration: none;

  border: 0px solid #a1a1a1;

  height: 40px;

  background-image: url ("http://gulfspilldemo.imsg.com/wp-content/uploads/blackgradient.jpg");

  background-repeat: repeat-x;

  border-radius: 10px 10px 10px 10px;

  }

  Any help is appreciated.  Thank you - Guy deaf

  Michael Walton wrote:

  My #mainmenubar code is not in this file yet but in thewhile I'm the test. Once I have run, I intend to add it to the main CSS file below:

  Are you sure the #mainmenubar of the css styles in the head section of the page come AFTER the link to the main css file?

  Try adding:

  #mainmenubar a {}

  color: #fff;

  }

  OR

  The page has a wrapper

  ?

  Very often, you may need to do something like:

  #wrapper #mainmenubar

• Need help with the Oracle error table

  Hello
  
  I'm procedures for migration from SQL server to Oracle.
  
  In SQL server there is a reference to the table * master.dbo.sysmessages * is there any table in oracle, which equals master.dbo.sysmessages table of SQL server.
  
  Thanks in advance.

  Hello

  In sql server, the view is not containing error details.., I think that there is no such a table in oracle... To do this use the SQLERRM function in oracle...

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.