Need help with the new graphics card

Similar Questions

• Help with the new graphics card on old pc

  I have a dell dimension 3000 'ya I know sad' I would like to add a graphics card and a new soft power since the wife won't let me buy a new PC GRRRR

  I have a GeForce 6200 PCI 256 MB dcr2 it will work in this pc

  I also bought a power electric double w 480 SATAs is large enough to run the new card and the pc?

  Thank you

  You can add the 6200 PCI if you wish.  It does not require an upgrade of the power supply however.  It will work fine on your PSU 250 watts.  I have the 6200 circulating in a Dell with a 250W unit just to get the higher resolutions than the integrated graphic card has been able to provide in support of a monitor.

• Newbie need help with the old graphics card Dell Dimension 2400

  Hi all

  Happy to discover this community and I hope I can get some answers here. Is there ANY video there card that would allow me to see the images that was shot in 1080 p on my old Dell Dimension 2400? Your help is very much appreciated here.

  Thank you.

  Nicolas

  Hi NICOLAS,.

  Motherboard Dell Dimension 2400 does not come with AGP slot or slot PCIex16. You will have to look out for PCI video cards, but most of the cards are low profile cards. You won't get a FHD 1080 p resolution.

• BlackBerry Smartphones need help with the new sim card

  I don't know why I have such a hard time finding how to do this. It's really making me feel like a * beep * here, so any help will be appreciated

  I'm on Sprint here in the United States and I'm on a trip to Romania in a few weeks and I wanted to have my phone all set up in advance. I bought a prepaid SIM Vodafone Romania, and told me that it is active and active international roaming. I tried it in 2 unlocked bolding my 9930 current and my old 9650. All I get is SOS and emergency calling only, both on AT & T or T-Mobile. I can't yet figure out how to get the phone number attached to the card. What's on the map with that he came are BPUK PIN and PUK. And I can't record with MyVodafone on their website without the phone number. I don't really know how to proceed. I was hoping to use SMS in roaming here until I leave.

  Thanks in advance...

  I was able to get the activated through e-mails with vodafone SIM. Just post here my solution in case anyone has the same problem.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Pavilion p6 - 2120t: Windows will not start with the new graphics card

  Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.

  HP Pavilion p6 - 2120t CTO desktop PC

  Configuration:
  Intel Pentium CPU [email protected]
  4.0 GB RAM
  Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
  Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)

  BIOS to Version 7.18

  Running:
  Windows 7 Home premium 64-bit w/service pack 1
  Two monitors (VGA, 1 digital port 1)

  Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.

  For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.

  I plugged both monitors to their connections voted on the new map.

  When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.

  The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.

  Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.

  Tried the above process two more times with the same results.

  I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:

  > Sources of boot UEFI

  Windows Boot Manager

  > Sources of boot legacy

  ATAP I CD/DVD player

  SATA2

  Hard drive

  SATA0

  Network controller (Realtek PXE B06 D00)

  PC using UEFI Boot Manager Windows boots normally

  I have not tried Legacy Boot Sources because I don't know which one to choose.

  I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18

  I know that others have had a similar problem but I have not seen a solution that works for my PC.

  Any advice would be welcome.
  Thanks for your time.

  Hello

  Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager.  I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.

  The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.

  

• Does not start with the new graphics card

  Hello. I have a P7-1058uk Pavilion Cleveland-GL8 motherboard with integrated graphics.

  I bought a new monitor that has resolution 2560 x 1440, equal the integrated graphics card can face if tried to to level with a Gigabyte GT630 card.

  When I start, I have now the chance to the blue HP screen but not more details. If I start with F10 or ESC key, I get a black screen instead. Whatever it is, I am asked to press ESC to enter in the start, but by pressing on the button has no effect and the computer just hangs. There is a cycle repeated very quiet click that sounds like the disk drive HARD trying to start then stop

  If I remove the graphics card and connect the monitor to the integrated graphics card then all's well again (but limited to the resolution 1920 x 1080).

  Perhaps foolishly, I assumed it was a problem with the residual power (300W) and not enough punch power to run the HARD drive. But who, after having upgraded to 650W it makes no difference. I also tried to download the NVidia drivers but it won't let me install because I can't get the computer to work without the graphics card and Nvidia install it because it cannot detect the hardware.

  Any ideas/help would be appreciated.

  Andrew

  You can have one of these motherboards that are not happy with NVIDIA graphics cards.

  This may sound a little weird, but it happens.

  The other possibility is that you have damaged your home x - 16 PCI Express by installing a map requiring more that the installed power supply has been able to provide.

  Kind regards

  ERICO

• Newbie needs help with the new system specs!

  I need to upgrade my system to my work because of the need to begin to use Camtasia and Premiere Pro CS6 (as well as other elements CS6).  I'm not a computer expert and the machine below will be set up for me next week.  I have a few questions that I had grealtly appreciate any feedback on:

  1. Do you think that in general my new system specifications are not enough for basic audio/video editing of SD and HD material?
  2. Can I expect a significant increase in the quality of video playback, as well as a reduction in the time of video rendering while you use Camtasia and Premiere Pro?
  3. Is my diet is going to be enough for the specifications below and if not what is the danger of not leveling who?
  4. If there is some thing/nothing else I had to upgrade what would it be?

  I work for a retail tile distrubtor with about 130 employees.  Training videos, that I create are mostly screenshot simple and basic videos that do not require a TON of high-end editing.  I use a lot of images JPEG high resolution and basic SD video sequences captured from a camcorder Canon GL2 (Mini DV cassettes).  Us will modernize ends up the camera, but that's what I use now.

  The previous computer I had suffered with very choppy video playback and long video rendering times and so I convinced my boss and IT Manager needs an improved system that has a faster processor, a better video card and more RAM.  I used my old system this year and the other takes place next week, is listed below.

  Thanks a TON for anyone who feels inclined to provide information!

  Andrew

  New system:

  HP Compaq Elite 8300

  • Win 7 64 - bit operating system
  • CPU i7-3770
    • 3.4 GHz
    • 8 MB Cache
    • 4 cores
  • Quadro 2000 D (62 watt max current absorbed) graphic card
  • 12 GB of RAM (4 GB statndard, added two other cards of 4 GB)
  • 1 TB SATA hard drive 7200 RPM
  • Intel Q77 Express Chipset
  • 320 watts power (stock)

  Old system:

  HP Compaq 4000 Pro (small size)

  • Win 7 64 - bit operating system
  • Processor Pentium Dual Core E6600
    • 3.06 GHz
    • ? MB Cache
    • 2 carrots
  • NVIDIA NVS 300 Graphics Card
  • 8 GB of RAM (4 GB statndard, added a card of 4 GB more)
  • 457 GB hard drive
  • ? Chipset

  Added CPU, system, a couple of USB devices fans cooler fans, etc.

  I did the calculation with an i7-3770 stock, 3 sticks of RAM, a graphics Quadro 2000, 2 USB, 2 x 120 mm, SATA 2 x 7200 RPM drives fans devices, 1 DVD burner, 30% capacitor aging and a 100% load system and come to this:

  

  There is no room for manoeuvre for any expansion at all. Not even add more USB devices.

• Need advice for the new graphics card

  I have a desktop HP Pavilion a6610t with HP w1907 monitors. Windows 7 32 bit.  I want to upgrade to a graphics card that supports two monitors.  Games isn't a factor, but I'd like a card that does not become the neck of the bottle when you surf or work remotely.  I have a PCIe - x 16 available slot.  My price range is around us $100.

  What should I look for another as the PCIe - x 16 and the ability to support two monitors when you shop for a graphics card?  I think the AMD Radeon HD 6570 is a good starting point.  What do you think?

  Any information will be appreciated.

  Here are the specifications and the configurable option for your desktop HP Pavilion a6610t CTO. According to specifications, your system came from the factory with a 250 watt power supply. Most retail graphics cards require a power supply minimum system assessment of 300 watts or greater. The Radeon HD 6570 you noted requires a 400 watt or a bigger power supply. The CX500, CX600 Corsair are highly recommended, are favorites of the forum and are known to adapt to most cases of HP. For useful information on the selection of a graphics card that fits your computer and meets your needs, read Guide of Big_Dave of a discrete video card selection .

  Frank

• Lenovo M91p desktop does not boot with the new graphics card (Blank don't screen no BIOS)

  Hi all

  I recently bought a Lenovo M91p thinkcenter Desktop as an upgrade to my old PC i3.

  Old Spec is as follows:

  • Coolermaster Thunder 600W power supply
  • Card mother Intel DH55HC
  • Processor i3
  • Graphics HIS HD Radeon 7950
  • 8 GB RAM
  • HARD DRIVE 500 GB

  I transferred my HD supply and Power 500 GB old to new Lenovo desktop and everything starts very well.

  Then I installed 2 x 2 GB extra in the Lenovo M91p (which in fact 8GB) and updated the disk of 500 GB to 1 TB.

  So my new spec is as follows:

  • Coolermaster Thunder 600W power supply
  • Card mother Lenovo Q67
  • I7 2600 3.4 Ghz CPU
  • 8 GB RAM
  • 1 to and 500 GB HARD drive

  Everything Booted fine. Then I tried to install my old graphics (HIS 7950 graphics Radeon HD card) card. I got was a blank screen, no beeps, no BIOS... Nothing.

  At first, I thought that my diet was not enough... So I tested a 750W power supply in the pc. Still nothing.

  Then I thought that the motherboards BIOS was outdated... Updated... Still nothing. I even tried to update the firmware of the graphics card. Nothing.

  The graphics card works because I tested it in my old machine and it worked 100%.

  However, I took my graphics card to my provider and he tests it on another of his pieces... Did not work there either.

  My PC BIOS is not supported for secure boot, in case anyone wants to know.

  I am out of ideas now... Anyone able to help?

  There is a white list of graphics cards that will recognize the BIOS. The 7950 HD is a map of 180w, well beyond what the power plant can provide (and case/sufficient cooling fans for) and not a single one is that Lenovo would provide support for the BIOS.

  Use the search engine above to see what cards other owners have used successfully in their M91p.

• (Redirected) upgrade my studio 9100 with the new graphics card and a more powerful power supply

  I have a studio 9100 with 525 usual w PSU. I need a processor amd or NVidia card and MI those watching amd r9 x 280 and 780 NVidia gtx need system in order to get a 750 w power supply. should I buy the card and the power supply through dell, or somewhere else?

  Hi michaelwilson73,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• With the new graphics card failure

  I tried to put a graphics card in my desire to 700-210xt, there graphocs of the motherboard and I need the output HDMI and DVI, which he did not.  I added an ASUS silent 210.  Power on or monitor the work and the computer beeps six times.  Monitor never works, not isolation, or duplicate, even if the computer doesn't seem to not be starting.

  Remove the graphics card returns the system operation.

  Suggestions?

  Hello

  See the HP document on the following link.

  http://support.HP.com/us-en/document/c03653200

  Kind regards

  DP - K

• Need help with the basic graphics

  Hi all

  I started trying to familiarize themselves with the development on the Blackberry. It seems

  easy just use the standard of review, but becomes frustrating when I try to

  paint the screen exclusively from the Graphics object.

  My test program extends from the screen. The screen has a background

  and the moving objects, but flickers (at least in the Blackberry JDE 4.7).

  The flicker is reduced more when I work with the Graphics object

  directly. If I write an object buffer Bitmap, drawBitmap back to the

  main screens, flickering Graphics object is ridiculous.

  I've seen other discussions where people told of using MIDlets or extend from BlackBerryCanvas or GameCanvas.

  Try one of those who seems to make everything harder than it should be.

  Is there a single best way to do a screen play?

  Pointers, links, tips, samples,... would be greatly appreciated.

  Thank you!

  Hi, I had the same problem with twinkle. What you need to do is to synchronize threads. and the problem disappeared!

  Kind regards

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Pavilion p6 - 2020t: HP-Pavilion will identify the new graphics card

  Hello

  I got a HP Pavilion for a few years now and never updated my BIOS (not that I know well). I'm trying to install a new graphics (gtx 750ti) card and the computer does not recognize it. It shows the first screen, and then a black screen and a beep, then it crashes. Keyboard does not work, cannot get into the BIOS.

  I tried everythign with current BIOS, boot legacy and ensuring that the Integrated GPU is disabled, and nothing works. I also did research on food, and but it is not terrible, it should work with this graphics card (the fan even spinning).

  According to my research, the current BIOS is simply not recognize, and I need to update. My current version is: FRIEND 7.16, 05/10/2011

  I navagate through the HP website and it said that the automatic update should update the BIOS for Windows 10, and it won't let me download all drivers (although the last BIOS update was 2011). I tried to enter the FRIEND's site and download it from there and it won't even install their drivers, it says that flash is not supported (probably for Windows 10).

  If someone could give me an idea of how can I get a newer version of the BIOS for my motherboard, it would be much appreciated as I'm pretty sure that's the reason why the computer is not recognizing the new graphics card

  The risk is that the video card is one that is for a newer PC with an EFI BIOS. That's why the empty card is not recognized.

  If you use a card equipped with a switch on the virtual card allowing the use in legacy and uefi BIOS it will work with the BIOS of your PC.

  Sapphire makes video cards that have this capability. Take a look at the catalogue. What you need is a PCIE x 16 card video with switchable legacy\uefi BIOS or legacy support, but not only UEFI.

  http://www.sapphiretech.com/catapage_tech.asp?cataid=8 & lang = eng

  You cannot change the type of BIOS that your PC has in the UEFI.  It's a question of his being of a generation of diferent from the PC.