Need help with this problem without downgrading from Vista to XP pro.

OK so I have a problem, but it is in a common category, it is a rare problem as given that everywhere I look I can't seem to find someone who has the same problem.

Question #1: Heres Alright so my question downgrade from vista 64 bit of the month last to XP pro SP2... Well, I'm going through the process of installation very well, wipe the hard drive, make new partion (or how ever spell you it) etc. It starts the formatting, and it installs everything seems to be fine. Now when it comes to the reboot screen it counts down it restarts correctly now, this is where the problem occurs. During the restart of the process rather than continue through the installation process which should be, where it says "Press any key to boot from the CD" soon after that instead of going into the installation process it says "disc read error" or something of the sort just underneath. Help, please!

Question #2 also now that I re installed vista I did all good also, erased the hard disk (even I tried to install XP on) just to make sure they had no data on this. Well now, during startup it asks if I want "a previous version of windows" or "Windows XP" as if I double started somehow. Vista loads still very well when I choose it however. If I managed to do an install own success of XP it should fix right?

Thanks again.

Hi Kevin112,

Thanks for posting. Follow these steps on your XP disk.

1. place your Windows XP installation CD and start to her...
2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
5. press ENTER.
6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
Allow it to complete undisturbed.
8. remove the disc, then restart.

After completing this, then format it and try to reinstall XP again. As for your other question if completely format you your drive using XP you should not see the previous version of XP. The only reason you would see that it's the Vista BCD is located on a second hard drive in your computer. If this is the case and you want to do an install own format two readers please.

I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Tags: Windows

Similar Questions

  • Need help with this problem please

    Hi all
    I have 2 tables and I am runnig the following query against it:
    select t1.ID_NBR, t1.START_DATE,t1.END_DATE,t1.SAMPLE_ID,t2.END_INTV_TIME,t2.CIN_DATA_ID
    from sample t1,weekend t2
    where t1.SAMPLE_ID=t2.SAMPLE_ID_1
    and t1.WEEKEND_FLAG='Y'
    and t1.SITE_ID_NBR='000097117011'
    and get the following dataset:
    ID_NBR     START_DATE     END_DATE     SAMPLE_ID     END_INTV_TIME     CIN_DATA_ID
                             
    97117011     91908     92108     143493     100     131834
    97117011     91908     92108     143493     200     131835
    97117011     91908     92108     143493     300     131836
    97117011     91908     92108     143493     400     131837
    97117011     91908     92108     143493     500     131838
    97117011     91908     92108     143493     600     131839
    97117011     91908     92108     143493     700     131840
    97117011     91908     92108     143493     800     131841
    97117011     91908     92108     143493     900     131842
    97117011     91908     92108     143493     1000     131843
    97117011     91908     92108     143493     1100     131844
    97117011     91908     92108     143493     1200     131845
    97117011     91908     92108     143493     1300     131846
    97117011     91908     92108     143493     1400     131847
    97117011     91908     92108     143493     1500     131848
    97117011     91908     92108     143493     1600     131849
    97117011     91908     92108     143493     1700     131850
    97117011     91908     92108     143493     1800     131851
    97117011     91908     92108     143493     1900     131852
    97117011     91908     92108     143493     2000     131853
    97117011     91908     92108     143493     2100     131854
    97117011     91908     92108     143493     2200     131855
    97117011     91908     92108     143493     2300     131856
    97117011     91908     92108     143493     2400     131857
    97117011     91908     92108     143493     100     131858
    97117011     91908     92108     143493     200     131859
    97117011     91908     92108     143493     300     131860
    97117011     91908     92108     143493     400     131861
    97117011     91908     92108     143493     500     131862
    97117011     91908     92108     143493     600     131863
    97117011     91908     92108     143493     700     131864
    97117011     91908     92108     143493     800     131865
    97117011     91908     92108     143493     900     131866
    97117011     91908     92108     143493     1000     131867
    97117011     91908     92108     143493     1100     131868
    97117011     91908     92108     143493     1200     131869
    97117011     91908     92108     143493     1300     131870
    97117011     91908     92108     143493     1400     131871
    97117011     91908     92108     143493     1500     131872
    97117011     91908     92108     143493     1600     131873
    97117011     91908     92108     143493     1700     131874
    97117011     91908     92108     143493     1800     131875
    97117011     91908     92108     143493     1900     131876
    97117011     91908     92108     143493     2000     131877
    97117011     91908     92108     143493     2100     131878
    97117011     91908     92108     143493     2200     131879
    97117011     91908     92108     143493     2300     131880
    97117011     91908     92108     143493     2400     131881
    97117011     91908     92108     143493     100     131882
    97117011     91908     92108     143493     200     131883
    97117011     91908     92108     143493     300     131884
    97117011     91908     92108     143493     400     131885
    97117011     91908     92108     143493     500     131886
    97117011     91908     92108     143493     600     131887
    97117011     91908     92108     143493     700     131888
    97117011     91908     92108     143493     800     131889
    97117011     91908     92108     143493     900     131890
    97117011     91908     92108     143493     1000     131891
    97117011     91908     92108     143493     1100     131892
    97117011     91908     92108     143493     1200     131893
    97117011     91908     92108     143493     1300     131894
    97117011     91908     92108     143493     1400     131895
    97117011     91908     92108     143493     1500     131896
    97117011     91908     92108     143493     1600     131897
    97117011     91908     92108     143493     1700     131898
    97117011     91908     92108     143493     1800     131899
    97117011     91908     92108     143493     1900     131900
    97117011     91908     92108     143493     2000     131901
    97117011     91908     92108     143493     2100     131902
    97117011     91908     92108     143493     2200     131903
    97117011     91908     92108     143493     2300     131904
    97117011     91908     92108     143493     2400     131905
    What I wanted was to add 2 columns to all data above, the reason is the dataset above has 72 files, one file per hour for 3 days from Friday 01:00 and ending the Sunday i 2400, but all have in all of the above data is just the date of beginning and end, so I created the following query to add the columns :
    SELECT *
      FROM (SELECT t.*,
                   TO_CHAR (TO_DATE (start_date, 'mmddrr') + TRUNC (rn / 24),
                            'Day'
                           ) AS weekday,
                                  TO_CHAR (TO_DATE (start_date, 'mmddrr') + TRUNC (rn / 24),
                            'mmddyy'
                           ) AS next_date
              FROM (SELECT t1.id_nbr,
                                                  t1.start_date,
                           TO_CHAR (TO_DATE (t1.start_date, 'mm/dd/yy'),
                                    'fmDay'
                                   ) AS start_day,
                           t1.end_date,
                           TO_CHAR (TO_DATE (t1.end_date, 'mm/dd/yy'),
                                    'fmDay'
                                   ) AS end_day,
                           t2.sample_id_1, t2.cin_data_id,
                           t2.end_intv_time, ROW_NUMBER () OVER (PARTITION BY t2.sample_id_1 ORDER BY t2.cin_data_id)
                                                                            AS rn,
                           COUNT (t2.cin_data_id) OVER (PARTITION BY t2.sample_id_1)
                                                                           AS cnt,
                           t1.weekend_flag
                      FROM sample t1,
                           weekend t2
                     WHERE t1.sample_id = t2.sample_id_1
                       AND t1.weekend_flag = 'Y') t)
     WHERE TRIM (weekday) IN ('Friday', 'Saturday', 'Sunday')
       AND nbr = '000097117011'
    And the problem I have now is instead of 72 for 3 days I get only 71 and time 2400 is paased on the next day, I tried to use CEIL instead and ended up getting 48 reocrds instead, the following dataset is when I used the above query
    ID_NBR     START_DATE     START_DAY     NEXT_DATE     WEEKDAY     END_DATE     END_DAY     SAMPLE_ID     CIN_DATA_ID     END_INTV_TIME
                                                 
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131848     1500
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131849     1600
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131850     1700
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131851     1800
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131852     1900
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131853     2000
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131854     2100
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131855     2200
    97117011     91908     Friday     91908     Friday        92108     Sunday     143493     131856     2300
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131857     2400
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131858     100
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131859     200
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131860     300
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131861     400
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131862     500
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131863     600
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131864     700
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131865     800
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131866     900
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131867     1000
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131868     1100
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131869     1200
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131870     1300
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131871     1400
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131872     1500
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131873     1600
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131874     1700
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131875     1800
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131876     1900
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131877     2000
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131878     2100
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131879     2200
    97117011     91908     Friday     92008     Saturday      92108     Sunday     143493     131880     2300
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131881     2400
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131882     100
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131883     200
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131884     300
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131885     400
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131886     500
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131887     600
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131888     700
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131889     800
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131890     900
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131891     1000
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131892     1100
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131893     1200
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131894     1300
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131895     1400
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131896     1500
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131897     1600
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131898     1700
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131899     1800
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131900     1900
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131901     2000
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131902     2100
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131903     2200
    97117011     91908     Friday     92108     Sunday        92108     Sunday     143493     131904     2300
    Need help please.
    Thank you

    Hello

    Hours in a range of 0 to 23 hours day after midnight. You count from 1, not 0, so the 24th hour (from Friday) is actually from 00:00 on Saturday, and the 72nd hour is 00:00 Monday, that you are not counting in the WHERE clause.

    Maybe when you calculate tn, you might simply subtract 1:

     SELECT *
      FROM (SELECT t.*,
                   TO_CHAR (TO_DATE (start_date, 'mmddrr') + TRUNC (rn / 24),
                            'Day'
                           ) AS weekday,
                                  TO_CHAR (TO_DATE (start_date, 'mmddrr') + TRUNC (rn / 24),
                            'mmddyy'
                           ) AS next_date
              FROM (SELECT t1.id_nbr,
                                                  t1.start_date,
                           TO_CHAR (TO_DATE (t1.start_date, 'mm/dd/yy'),
                                    'fmDay'
                                   ) AS start_day,
                           t1.end_date,
                           TO_CHAR (TO_DATE (t1.end_date, 'mm/dd/yy'),
                                    'fmDay'
                                   ) AS end_day,
                           t2.sample_id_1, t2.cin_data_id,
                           t2.end_intv_time, ROW_NUMBER () OVER (PARTITION BY t2.sample_id_1 ORDER BY t2.cin_data_id)
                                 - 1           -- Added
                                                                            AS rn,
                           COUNT (t2.cin_data_id) OVER (PARTITION BY t2.sample_id_1)
                                                                           AS cnt,
                           t1.weekend_flag
                      FROM sample t1,
                           weekend t2
                     WHERE t1.sample_id = t2.sample_id_1
                       AND t1.weekend_flag = 'Y') t)
     WHERE TRIM (weekday) IN ('Friday', 'Saturday', 'Sunday')
       AND nbr = '000097117011'
    

    To view the actual end time, add one hour before posting.

    What happens if you are missing a row for some reason any? Just using ROW_NUMBER won't take the missing line into account. It would be preferable to derive the time of the end_intc_timecolumn. Of course, it would be even better to store the date and time ending in a DATE column all the way.

    I hope that answers your question.
    If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
    Explain, using specific examples, how you get these results from these data.
    You must not post a lot of data: 6 hours, ending at midnight Monday, should be enough to show the problem and its solution.

    Always tell what version of Oracle you are using.

  • Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

    Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

    Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

    I was wondering if I saved a layer somewhere and set it as a default value.

    If you group the layers, you will be left with a single layer, thus spreading your concern.

    Suggest that you do the following:

    1. Make sure you have the latest drivers for your printers
    2. Reset the default preferences.

    Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

    Items nearby and let regenerate the file.

  • [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

    [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

    I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

    Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

    I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

  • Need help with this gallery of xml!

    I have build a gallery but its very simple... There are pictures of the xml file.

    I have attached all the zip files.

    I just want two things if anyone can help.

    first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.

    and secondly, I want to use the AutoPlay feature.

    Once swf starts images came one by one with a vertical drop of a few seconds.

    Thanks in advance... I really need help with this..!

    For the look of sliding effect using the actionscript class Tween.  Allows you to create motion tweens using the code.  The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...

    import classes before using

    Import mx.transitions.Tween;
    Import mx.transitions.easing.Regular;

    TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);

    To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time

  • I need help with a problem of file softdub.dll any answers or how to replace it?

    I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

    Hello

    Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

    If you don't have anything done, see if this information helps you.

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

    http://support.Apple.com/kb/HT1923

    If the advice already given does not, please contact Apple for assistance.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

  • Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

    Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

    Please refer to

    Error 207 to "install Adobe".

  • Downgrade from Vista to XP Pro Dell Inspiron 6400: no sound, error Code 10

    Downgraded from Vista to XP Pro (V. 2002) on my Dell Inspiron 6400 laptop.  Have installed Service Pack 3.

    Audio will not play (I get beeps of warning system but that's all, there isn't a problem with the hardware).

    In Device Manager, there is a yellow exclamation by the "IDT High Definition Audio Codec" under sound, video and game controllers.

    Dxdiag shows NO device installed.

    NO device does appear as installed anywhere.

    I tried the updated drivers, did NOT work.  Get the error code 10.

    Automated fix - it doesn't include troubleshooting for audio.

    Does anyone have a solution?

    DM1313,

    This system comes with 3 different sound cards to choose from. You can view download driver sound options by clicking below.

    Audio drivers Inspiron 6400

    Thank you

    Dell-Jesse

  • Downgrade from Vista to XP Pro

    My company bought a laptop computer for us to use around the laboratory. The Dell Latitude D630 has been bundled with Windows Vista. We prefer to use Windows XP Pro to maintain consistency and ensure that all programs "home-made or home ' run as it should. What are my options to downgrade from Vista to Xp Pro? Thank you.

    If you have a retail version of Windows XP with the product key, Yes. As long as there are drivers available for this computer to Windows XP from the manufacturer.

  • Downgrade from vista to XP pro on Pavilion dv3-2005ee (need drivers)

    Hello

    I want to downgrade from vista to XP SP3 because some old games on does not work on vista as Hitman:codename 47 and TheSims... etc.

    Then... I need help to find the driver for this laptop. I did a forum search for my model and found nothing.

    Thanks in advance!

    Hello

    Before that we'll start with her, I have something to tell you. Decommissioning of this model is not always easy, and your model is designed to work well with Vista. Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it. I don't know then it's dv5 guide, but a lot of hardware and drivers are the same for both models. It is recommended also by me to print this guide and information on the problems with the sound card.

    First make the Vista backup. Here you have all the information, how do.

    You have a folder with the drivers & programs that can prove very useful after downgrade XP. Copy the folder in C:\Swsetup on DVD Before you format your hard drive.

    Now you need to integrate your drivers Sata (only x 86 drivers) win nLite.

    Here is the guide how to do it and here are AMD SATA AHCI Controller for you. Just unRAR it drivers with winrar.

    Remember, also, that you use the Windows XP SP2 version. If you have not got the version SP2 here you can download this service pack

    and here you guide how to integrate this file with your new system of nLite.

    In this program, you can even burn your new XP cd with this driver.

    Message edited by Daniel_Potyrala on 12/09/2009 16:36

  • I need help with a problem of scrolling on my laptop

    I have a toshiba laptop with windows vista. The problem is with scrolling and it started this morning after getting information from the Washington Post, where executives of information jump every 5 seconds. Before I entered the Post, my computer was scrolling smoothly and quickly. Now, he jumps at a slow pace, even after that I release the square keys.

    I tried to find something in the Control Panel, but there was nothing there for the problem. I then cut the modem, thinking that would help, but nothing.

    Soon I'll be 80 and not computer wise.

    I would give to apreciate any help!

    Happy new year

    John

    Hi again,

    I have a laptop Toshiba Satellite that gives me problems with scrolling since 12/31/11. Bikest T recommended something that fixed the problem for about 1 to 2 hours and he returned. I use a pad and the up/down keys. No mice. If I used either top or key frame/presentation will continue to jump, at a very slow pace for executives from 4 to 7 after the button is released and I can't stop fucking her.

    I tried the driver Dective who said I had an outdated driver. Being a novice in computer science, I tried, without success, to how this problem could be fixed.

    I had this same problem about a year ago and I don't remember how it was corrected.

    At the time, that this problem is back, I was on The Washington Post watch automatic 5 second frame advances and once they stopped, my smooth scrolling stopped and my scrolling problem started. Any help would be appreciated.

    Happy new year!

    John

    Hi sandanZY

    I merged your new thread on this subject in this thread. Please use the address on the bottom of the message in this thread rather than creating new threads on the same topic.

    Thank you.   :)

  • HP Pavilion Slimline s5 - 1140d: need help with relocation to Windows 7 from Windows 10 Technical Preview

    Hello. I am currently using a Windows 10 Technical Preview in my office and want to install the official version of Windows 10. However, Microsoft has answered me, in order to install the FREE Windows Home 10 fresh new official retail version, I have to go back to the previous version which is Windows 7 then updated via windows update. I tried to check with HP Recovery Manager, but there is no option to return to windows 7. Only it has option to reset the tech 10 preview windows. So I went to the Microsoft website to download the ISO of Windows 7 files to install in flash player, it asks for the product key. And then I entered the key correctly which is stuck on my Windows product key sticker desktop. But he didn't and the message that this is a key of the OS preinstalled, contact your manufacturer. Now, I'm stuck with how to return to Windows 7! I need help ASAP! Thank you. I did backup and everything so much already.

    Yes, M$ makes it seem as if the OEM product key will work, but it does not work. There are choices and it depends on how you wish to just to proceed.

    As the model number is not included in the post, it is only a general Council, here.  You can make one of these to restore Windows 7 to useful step.

    (1) reinstall Windows from the recovery disks set - if you do not, order of HP for a low price ~ $ 25 - $30 US

    (2) check if the recovery Partition (usually D :) there is and run recovery from that)

    3) reinstall using Winows 7 retail disc and allows to activate the COA key

    (4) buy 10 Windows and install

  • I need help with a problem of sensor horizontal banding in newly purchased a6000

    I recently bought an a6000 mail from B & H. I see horizontal visible bands anywhere in the frame, with normal photographs, nothing of multiple transformations. Now, I've seen many boards of Directors that it is a known problem. How Sony can sell such a defective product? I saw that Sony service says there is a problem with all CMOS sensors, but I have to many digital cameras, which the last - a RX 100 m4 and nothing ever seen before. How to get a repair or a refund, or a person to fix this problem? FWIW, I've been a professional photographer for more than 30 years. So far, I had the greatest respect for Sony, after using their products to deliver for decades. You've now lost my respect.

    Thank you

    Toby

    Hi kymarto,

    Welcome to the community of Sony!

    I'm sorry to hear that you are having problems with the camera A6000. Based on your other post, you have already reached out to your local Sony for assistance assistance team. If you have questions or concerns about this product or any other product from Sony, please do not hesitate to join us.

    For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region through http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

    If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

  • "Skype cannot connect. Get help with this problem.

    Well, I downloaded Skype. Then, I connect to my account. And an error on my computer screen that says "Skype cannot connect. Get help in solving this problem. " Someone help me solve this problem?

    Make shure that your firewall is disabled. If you have installed.

  • HP G60 - 127CL with XP laptop hardware Downgrade from Vista to XP question

    We have recently bought a HP G60-127 CL laptop and downgraded the OS from Vista to XP Professional with SP3 home.  I found all the drivers and installed them.  All pilots show that "working properly" and everything works except the network controller (wireless I think).  When I go to Device Manager, then in the other devices section, it says "network controller" with yellow?  Note: I installed the driver wireless adapter lan Broadcom 802.11 including hp recommended, rebooted, but still does not work.  I tried reinstalling the drivers, installation of versions of different driver, installation of service pack 3, reinstall XP, etc, but nothing works.  My network card works fine, so I figure that he need Wireless Lan because I can't turn on.  Any ideas?

    Here is the answer. It's an Atheros card not a Broadcom. Atheros AR5009.

    http://www.Atheros.cz/download/drive...0.35-WHQL.zip

Maybe you are looking for

  • GPS Gone, shooting, the Bluetooth WiFi range doubtful after 9.3.2

    I have an iPhone6 which is maybe 1 1/2 years old on and worked perfectly all the time until a few weeks ago. Seems as if after 9.3.2,and my GPS no longer works and the scope of my Bluetooth is about 3 feet.  I did the reset, the new phone set in plac

  • Stream 7: reset

    I had to i'il my Tablet and now sit hp says I have updates, but I can't down load them

  • Why Safari is automatically an "s" after "http"?

    Safari seems to automatically insert an "s" after "http", which in fact a search for a site secured, when all I want is the precarious site "http." For many sites, I have to manually delete the s in the url. It's infuriating - and probably a setting

  • USRP can be used as a gateway for NOR-WSN nodes

    Hello world I use NEITHER-WSN kIT includes a gateway (9792) and of the NODES(3202,3212,3226 all programmable) NOR-WSN and I also try experiments with NOR-USRP 2921, so I thought to replace NOR-USRP 2921 of GATEWAY ETHERNET of NOR-9792 TIME REAL as it

  • HP Pavilion: password administrator or Power ON password

    I have HP Pavilion, when I turned it on it's request administrator or Power ON password password. I tried three times to enter the password, I got a password not valid message 71207839. Can you please help me solve this problem Mohsin