Need help with volume control
I looked around the forums and found some ways quite complex to control the volume of a file being read. I'm new to LabView and I was wondering if I could get an example/explanation of how to simply control the volume of a sound file via a slider. I tried to use 'Sound exit Volume Set', but could not understand what the "task ID" should be, or whether it was still necessary.
Noticed that I never joined the mod, but no matter since I realized that if the .wav file is large you probably want to read in chunks. The mod above should have the number of samples control back in there.
Tags: NI Software
Similar Questions
-
I need help with the control of two .swf in third.
Hi, thanks for reading!
I need help with the control of two .swf in third.
I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener (this);
mcLoader.loadClip ("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {}
mc.gotoAndPlay (14);
}
But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
http://www.axiscc.com/temp/HCIC.zip
What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
ActionScripting is far from my point hard, so I'm definitely over my head here.
Thanks for your help.Got my solution on another forum.
-
Help with Volume control for the video player
Hey!
My video plays and stops correctly on my video player, but I can't understand this volume control. My cursor moves to the way I want it, but the volume does not adjust. Please tell me what is wrong with my code:
slider_1.onPress = function() {}
this.startDrag (true, _root.volume_bar1._x, _root.volume_bar1._y, _root.volume_bar1._x + 133, _root.volume_bar1._y);
}
slider_1.onRelease = function() {}
this.stopDrag ();
}
slider_1.OnMouseMove = function() {}
newPoint = new Object();
newPoint = this ._x
newPoint = this ._y
_root.volume_bar1.globalToLocal (newPoint);
_root.demo_reel.setVolume(-1*newPoint.x);
}
I watched a tutorial and died this code, but of course my own instance names.
Thanks in advance!
use:
paramsF (slider_1, _root.volume_bar1._x, 0, _root.volume_bar1._x + 133 100);
slider_1.onPress = function() {}
this.startDrag (true, _root.volume_bar1._x, _root.volume_bar1._y, _root.volume_bar1._x + 133, _root.volume_bar1._y);
}
slider_1.onRelease = function() {}
this.stopDrag ();
}
slider_1.OnMouseMove = function() {}
_root.demo_reel.volume = this.m * this._x + this.b;
}
function paramsF(mc:MovieClip,x1:Number,y1:Number,x2:Number,y2:Number):Void {}
MC.m =(Y1-Y2) /(x1-x1);
MC.b = Y1 - mc.m * x 1;
}
-
Need help with the control of time in labview
Hello eveybody.
In the image as an attachment, there is a vi that I did to control the amp.
I give the amplitude value DBL to the amplifier as 50V or 60V and it's there on the amplifier.
They problem is that I need to control the amplitude with the calendar. I like continious 50V for 5 sec, then peaking suddenly 100V for 1 second or 1msec and so on.
What should I do?
Any help...!
Thank you adigator
I find the solution and now I got what I thought...
-
Need help with movie controls (specifically the reboot)
Hi all
Noob question, so bear with me.
I have a site that loads a page with video playing on one of the pages. I put it in place so that clicking on the button of the page starts the video and clicking on a button for a another page stops the video.
However, instead of stop the video she just paused, so that when the user returns to the page with the video the video resumes where it left off, rather than restart.
My site as a whole is a great movie clip, so each page is not loaded when we click a button - the content is just interpolated on the stage.
Is it possible for me to have the control to stop the film playing (other buttons on the page) or to start playback of the movie (own page button) to have restart instead of the first image?
Code for the start is really simple:
content_mc.about_mc. MyVideo.Play ();
and the judgment is:
content_mc.about_mc. MyVideo.Stop ();
Thank you. I know I'm asking for the wrong thing because I left speechless Google results with what I ask, helps find the right way to do it is appreciated, even if I like a lot the way the site is designed so preferably not redo the whole site would be great!
C.
If you do not use a pause button so you can activate your flvplayback instance autoRewind property the flv file will restart from the beginning, whenever it stops:
content_mc.about_mc. MyVideo.autoRewind = true;
-
Need help with slui message with the Validation Code: 50
OT: need help with the message 'victim' slui...
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
Windows product ID: 00371-702-8613485-06367
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150928 - 1507
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{60986DD4-5ADA-464C-A590-469385BD5D3A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-X7D3P 5 S-1-5-21-4040712825-3780279311-4191590923 the system manufacturer ,System Product Name American Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE 0409 0409 Central Standard Time(GMT-06:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
Installation ID: 022214046070387640229264400212325972472065330163335456
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: X7D3P
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trust time: 12/01/2016 11:28:57Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 1:11:2016 12:55
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC1425 APIC 060111
FACP 060111 FACP1425
HPET 060111 OEMHPET
MCFG 060111 OEMMCFG
LASRYVITRAGE OEMB1425 060111
ASPT 060111 PerfTune
OEMOSFR OSFR 060111
SSDT DpgPmm CpuPmHello
Thanks to everyone who responded to my question.
Turns out it would not activate the system properties page.
He did, however, turn on the tool online browser without a
hitch. Yes, problem solved.
Jon
-
Hello
First of all, let me apologize if this is in the wrong forum.
I need assistance with pivot control in Oracle. Here's what I'm trying to accomplish:
Select persongroup , status , count(status) as tot
de WorkOrder
où status in ('WSCH','WPLAN','WMATL','PLAN','APPR')
et persongroup in ('K3P-GEN','K3P-ELEC','K3P-INST','K3P-MECH')
Group of persongroup,State
order by 1
Results:
K3P-ELEC APPROX. 12
10 PLAN K3P-ELEC
K3P-ELEC WMATL 10
K3P-ELEC LEVELS 109
K3P-ELEC WSCH 18
K3P - GEN APPROX. 17
PLAN OF K3P - GEN 59
K3P - GEN WMATL 10
K3P - GEN LEVELS 188
K3P - GEN WSCH 22
K3P-INST APPROX. 18
K3P-INST PLAN 27
K3P-INST WMATL 17
K3P-INST LEVELS 60
K3P-INST WSCH 40
K3P-MECH APPROX. 4
K3P-MECH 47 PLAN
K3P-MECH WMATL 14
K3P-MECH LEVELS 20
K3P-MECH WSCH 52
I want to see is:
APPR WMATL LEVELS WSCH TOTAL PLAN
K3P-ELEC 12 10 10 109 18 159
K3P - GEN 17 59 10 188 22 296
......
Using the above query I tried, but this is incorrect;
Select * from (
Select persongroup , status , count(status) as tot
de workorder
où status in ('WSCH','WPLAN','WMATL','PLAN','APPR')
et persongroup in ('K3P-GEN','K3P-ELEC','K3P-INST','K3P-MECH')
Group of persongroup,State
order by 1
sum(3)
for status in ('WSCH','WPLAN','WMATL','PLAN','APPR')
order by 1
Any help appreciated.
Thank you
Cameron
You missed the "PIVOT" option, try this:
SELECT *.
FROM (SELECT Tot Persongroup, status, COUNTY (status)
FROM Workorder
WHERE Status IN ('WSCH', 'LEVELS', 'WMATL', 'PLAN', 'POPULAR')
AND Persongroup IN ('K3P-ELEC","K3P-INST","K3P - GEN","K3P-MECH")
Persongroup, status)
PIVOT (SUM (Tot) for registered IN ('WSCH', 'LEVELS', 'WMATL', 'PLAN', 'POPULAR'))
ORDER BY 1
/
-
Need help with video scrolling
Hello
I need help with a project. Subsequently, I want is that a webcam controls the position of the mouse and the mouse position
control of a video. But I would like the part where the mouse position controls the video.
So, if the mouse is on the left on your screen, the video will be on the first image and when you move, you're the mouse for
the right to the video play as a result traffic. and stop when the mouse is completely right.
Effectivly the scrolles from the mouse through the video. It must be on the x-axis.
I'm not that formilliar with flash, so any help would be great
THX!
Thijs
what you need to do, is to designate a rectangle where users can use their mouse to scroll through the video. If this rectangle has instance name bar, you can use:
var m, b:Number;
var lastSeek:int = getTimer();
flv_pb.addEventListener (MetadataEvent.METADATA_RECEIVED, f);
bar.addEventListener (MouseEvent.MOUSE_MOVE, moveF);
function f(e:MetadataEvent):void {}
paramF (0,0,stage.stageWidth,e.info.duration);
}
function moveF(e:MouseEvent):void {}
{if (getTimer () - lastSeek > 1000)}
flv_pb. Seek(m*e.stageX+b);
lastSeek = getTimer();
flv_pb. Play();
}
}
function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}
m = (y2 - y1) / (x 1 - x 2);
b = y1 - m * x 1;
}
-
Need help with this gallery of xml!
I have build a gallery but its very simple... There are pictures of the xml file.
I have attached all the zip files.
I just want two things if anyone can help.
first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.
and secondly, I want to use the AutoPlay feature.
Once swf starts images came one by one with a vertical drop of a few seconds.
Thanks in advance... I really need help with this..!
For the look of sliding effect using the actionscript class Tween. Allows you to create motion tweens using the code. The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...
import classes before using
Import mx.transitions.Tween;
Import mx.transitions.easing.Regular;TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);
To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time
-
I'm suddenly needing help with my browser Firefox (6.0.2)
Hello
I'm suddenly needing help with my browser Firefox (6.0.2)(OS: I use Windows XP).
When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.
I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.
This problem started today, September 8, 2011 and has never happened before.
Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?
I also noticed that just before I "opened" Firefox, I now get a small box indicating:
[JAVASCRIPT APPLICATION]
Handl exc in Ev: TypeError: this oRoot.enable is not a functionThis never appeared before - I hope that it offers a clue has what is wrong.
The browser not be stuck in Mode safe, said by the way.
Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
(A friend sends this request in my name from their pc)Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.Thanks in advance.
One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Need help with installation on Photosmart C7280 all-in-one
I had my printer is installed and has been using the printer for 3 wireless laptops in my house. Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless. I don't know what happened, but the fax for this printer is listed, but not the printer itself. Help, please!
Click here to download the software for your printer:
has chosen the appropriate operating system that corresponds to your computer and download the full software features.
-
HP laptop: need help with internet and search for things
whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request
Yes it's a Windows 10 and it arrived already installed I'll take the other info now
-
Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.
Hello
The link below is a guige to install a video card in your Pc. In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below. If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.
http://support.HP.com/us-en/document/c01700855
Kind regards
DP - K
-
need help with my window is in thai and I don't quite understand.
How to convert to English? I tried for days but still it cannot be changed.
because I can't read thai... Please help me step by step...my pc is touchsmart 9100 windows 7 Professional.
Not a single word is in English if I go to the "region and language" to change.
Everthing is in thai in the system.
Hello
Where have you bought the PC?
What is the operating system installed?
Best regards
ERICO
-
I need help with an installation failure to interpret and troubleshoot a Setup log.
Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects. Shared Apple Final Cut X uses a different format that is not compatible with FCP6. Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.
Starting with OS X Lion, FCP6 would install not in Lion and thereafter.
According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle. He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.
Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:
https://discussions.Apple.com/message/26309669#26309669
I used this method with success to install FCS2 in Yosemite:
[click on images to enlarge]
However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:
First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along). I am unable to find such a method to post here.
Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:
If this element is not required, then maybe FCP6 can be installed successfully without it. And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.
It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.
Here is the post on MacRumors with pre-installed Setup log:
Maybe you are looking for
-
whenever I try to install an update of firefox I get the message "cannot install firefox updated to ensure no application for firefox is open". I have no application Open firefox. I'm running vista 64-bit.
-
OCZ DDR2 OCZ25331024VSO 1024Mo is compatible with my Tecra M3?
HelloI read on a different forum that OCZ25331024VSO is not totally compatible with my laptop. But some other users have said it works perfectly. So, I would know if I buy one, it will work correctly in my notebook?My laptop is a Tecra M3-S331. THX
-
Can someone explain what happened? All the available themes are the current non-transparent theme, called 'Modified Theme' and the classic Windows theme. It's really strange and really very boring, simply because I didn't ask for this. Everything I h
-
I installed Windows Live Mail, but cannot uninstall Windows Mail. It isn't in my programs/uninstall. Every email that comes in my new Windows Live Mail also comes in my old Windows Mail. Therefore, I must remove two programs. I have Vista.
-
Problem with "HP Solution Center" for HP Deskjet F2492
When I try to open the "HP Solution Center", I the fllowing message: Parsing error in thread C:\Program Files (x 86) \Hp Digital Imging\bin\hpqscloc\1033.xml. Result: I can always copy through the keys on the HP Deskjet printer, but I can't not "anal