Need help with windows 10 update

Similar Questions

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• need help with windows update C8000F1A error code

  I need help with an error code that is given to my PC when I try to put up-to-date

  Hello

  1. don't you make recent changes?

  2. This does happen with any special updates or all updates?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:
  I suggest you follow the steps in the link below and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  It will be useful.

• need help with windows live on my Vista free download

  I need help download Windows Live with my Vista operating system.  I get a screen popup telling me to "Get Windows Platform Update."   I have the following message.  When I check all my updates, none of them appear.  What I am doing wrong?

  1. In the list, select one of the following updates. (Only the update that applies to your operating system appears.)

  2. Update for Windows Vista (KB971644) platform

  • Platform Update for Windows Vista x 64-based Systems (KB971644)

  • Platform for Windows Server 2008 (KB971644) update

  • Update for Windows Server 2008 x 64 Edition (KB971644) platform

  Thanks for your help!

  This forum is for Microsoft Security Essentials, not Windows Live.

  You have to get help from Windows Live Support and Forums:

  Here is the Solution Center: http://windowslivehelp.com/product.aspx?productid=10.

  This is the only Forum for Windows Live ID: http://windowslivehelp.com/forums.aspx?forumid=d3fda415-1e53-4007-8e0c-2a77180ffb1d.  This is where you post for assistance.

• Need help with Windows 7 key.

  I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

  The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

  Need help please.

  You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

  

  How to change Windows 7 product key

  http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

• need help with windows update failures

  I'm really becoming disillusioned and anrgy. In the last 5 weeks or so I installed Windows 7 on at least 11 PCs,... and in all cases, bar 1, I am facing the same problem. I use the Start button, windows update to check for updates after a new installation, sometimes in a few seconds, I get the red error message, other times the normal practice of verification of updates begins. Invariably, nothing happens except the window Windows Update appears to 'disappear' or forget it works, so I start it again, wait forever and finally get the Red writes the error message. I tried the windows online and offline "Fixit and the right sequence is repeated continuously." Yesterday morning at 04:00 [if there are 36 hours] I completed a new installation, over the next 24 hours, I have to have rebooted and retried the windows update at least 4 times. I also tried a couple of different ' FixIt. This morning, becoming almost ready to... Yet once, I tried to use the updates. He did what he normally does... the scan, check... check... NOPE! nothing for you. So I tried the specific 'fixit' MicrosoftFixit.wu.LB.7235772074748435.1.1.Run it tooks ages and ages to complete... but once it was over, no changes because no errors not found. Immediately, I opened windows update via the Start button, click on check for updates... and immediately got written red error with updates. [Screenshots have been taken, timestamped in the seconds between them showing the previous references].

  Can someone help me? Why is - this all of a sudden becomes a common problem? Each PC I put back nine have different configurations, my wireless network has no problem with updates from the manufacturer's websites... SO, WHY THIS ISSUE FROM MICROSOFT?

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.

• Need help with Windows Defender

  My first time using Vista on a computer. I would use MS security essentials, but it is said to remove the other safety first. Do I need to uninstall Windows defender? If so, how. It does not appear on my list of program anywhere. Thanks for any help.

  The following threads should help you with your questions:

  MSE and Windows Defender: http://answers.microsoft.com/en-us/protect/forum/protect_start/windows-defender-and-microsoft-security-essentials/5309cb8d-02e1-40e8-974f-0dcedb9ab9fd

  Carefully read this thread: Checklist for installation of Microsoft Security Essentials

  Suggest you review and then download your installer from this link: http://www.microsoft.com/en-us/security_essentials/default.aspx

  I hope this helps...

• Need help with Windows Live Mail password

  Microsoft support told me that the only way to get help with my last password is by e-mail or forums and I recorded many positions and got no response.  I gave them all of my personal info to my email account and no response. I called in and no response.  Should I give up on this account?  I got it for more than three years and many court and legal emails were sent there I need.  Please notify.

  I guess that you have a Live account Windows that you do not manage to connect to for various reasons.  Can clarify you what the case, and you can specify that you forgot your password or your user name?

  If you talk about this type of Forums (below) then they are very busy, but eventually you should get a response from Microsoft.  If the problem is that I'm guessing that this is so only Microsoft can fix the problem for you, posters not Microsoft, as we find in this Forum won't be able to do much for you other than to advice on a course of action to follow.

  Reset your password
  https://help.live.com/help.aspx?mkt=en-AU&project=liveidv1&format=B2&QueryType=keyword&query=QAF

  Support e-mail for Windows Live ID.
  https://support.live.com/eForm.aspx?ProductKey=WLID&CT=eformts&b56fbf12-3dcf-4c16-9E21-25f9e35ffe3d&mapquerytype=keyword&mapquery=QAF

  If I remember the way Microsoft handle such problems with the "lockout", it's that they contact you by E-mail (an address that you can still access) and either reset your password or clear the problem after having proved to their satisfaction that you are the owner of the blocked account.  The process is a lot easier if you have (in the setup) provided them with another email address, or installed (and remember) secret an answer to the Question.

  Unfortunately, the whole process may fail and you may forever lose this account.  If that were the case, you should start now to try to get duplicates of important emails from the original sender.

• Need help with Windows 7 drivers for Radeon HD 7670 m on a preinstalled Windows Pavilion g6-2300sy 8

  Hey, I recently bought a HP Pavilion g6-2300sy with Windows preinstalled 8 and decided to install Windows 7 on it instead, as I'm rates more familiar with it. Now I seem to be running into issues with the Radeon HD 7670 m laptop graphics card, since I can't find a driver that works for her. I tried several generic drivers AMD HD 7000 series, but none of them is not working - Windows continues to give the error code 43.

  How can I fix without going back to Windows 8? Any help would be really appreciated.

  Hello:

  For the g6-2300sy, use the W7 x 64 drivers and software for this model:

  For the graphics, you install only the AMD graphics driver. Do NOT install the Intel driver.  The AMD driver has the graphics for two video cards.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4063&product=5278311&softw... =&

• Need help with Windows Live Movie Maker and DVD Maker

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  ===============================================
  First of all a question... did you you save the project in a video such as format
  . WMV or. MP4? Or have you just of WLMP project folder?

  I suspect that DVD Maker is to see your movie in one file
  and he has no idea where are your scenes. More than likely it is
  creation of scenes on his own in arbitrary places.

  In order for DVD Maker correctly, identify individual scenes
  each stage must be registered as an individual video clip, then
  the collection of video clips can be imported and each of them must
  become an individual scene.  DVD Maker is supposed to accept
  up to 18 scenes.

  Just an experience you can import your new original
  video clips in DVD Maker and see if it works properly. If
  It does what you want... change and re-record your clips one video
  both will be the fix.

  Good luck...

• MAC OS 10.6.8 using Safari 5.1 need help with Adobe Flash update

  Hello-

  Recently, Adobe Flash installed an icon in my system preferences and when I click the icon it has several tabs.  It allows updates automatically check.  It is said it will install the latest version of Flash without having to remove the previous version, but I've never said that a newer version is available, unless I have click "check now".  Although "Check updates automatically" is checked, I don't know where he tells me a newer version is available.  In addition, there was 5 "new versions" available since this icon has been installed in the system Prefeences, I only found on newer versions when I clicked on "check now".  If I read that with this new way to install the Mac final version of Flash requires not me to uninstall the previous version of Flash how we installed the latest version of Flash?  Is it in an email?

  Because it tells me that there is a newer version of Flash unless I click on "Check now" must still do the way I used to install the latest version of flash?  (The path in front of this icon was added to the system preferences)?

  I would appreciate help with update Flash to the latest version.  I used to uninstall the old version, restart the browser and download the latest version and install it.  He always worked find, but that was before there was an Adobe icon in my system preferences.

  Here are the instructions to uninstall and install the Flash drive on Mac:

  Uninstall Flash Player | Mac OS

  Setup instructions for Mac OS

  This link will give you updates for the two betas and release version updates.  In fact, whenever we update the player you should be notified.

  Thank you

  Chris

• need help with error in Update window

  error 80096001 that is the message I get I can't update

  Hi SejB,
   
  Welcome to the Forum of answers Windows Vista.
   
  This problem may occur if one or more of the following conditions are met:

  • Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
  • Cryptographic services is set to disabled.
  • Other Windows files are corrupted or missing.
  • The timestamp signature or the certificate cannot be verified, or is incorrect.
  • The hidden attribute is set to the folder %windir%, or one of its subfolders.

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.
   
  Method 1: Rename the Edb.log file
   
  Rename the Edb.log file, and then try to install the program again. To rename the Edb.log file, follow these steps:

  1. Click Start, click run, type cmd in the Open box, and then OK.

     Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

  2. At the command prompt, type the following command and press ENTER:

  Ren %systemroot%\system32\catroot2\Edb.log *.tst

  Method 2: Set Cryptographic on auto Services

  Define Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Method 3: Reregister DLL files that are associated with Cryptographic Services
   
  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, click run, type cmd in the Open box, and then OK.

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

  2. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll
  output

  Note If you are prompted, click OK .

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  1. Restart your computer.
  2. Click Start, click run, type cmd in the Open box, and then click OK.
  3. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note If you are prompted, click OK .

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  1. Restart the computer.

  Method 4: Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start, click run, type cmd in the Open box, and then OK.

  Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

• At the command prompt, type the following commands, pressing ENTER after each line:

attrib s h % windir %
attrib s h %windir%\system32
attrib s h %windir%\system32\catroot2
output

Method 5: Define a signature unmanned silent success strategy

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:

The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing

1. Right-click on the Policy binary value, and then click change.
2. The value data will appear in the following format:
0000 02

Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

1. Click OK, and then quit the registry editor.

Method 6: Clear the temporary file and restart the hotfix installation or the service pack installation
 
To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:

% systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
% systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

1. Remove all the oem *. * files in the % systemroot %\inf folder.
2. At the command prompt, type the following commands. Press ENTER after each command.

net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output

1. Restart the installation of the patch failed or the installation of the service pack.

Method 7: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

   Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

2. In the Services (Local) pane, click automatic updates, and then click stop.
3. Reduce the Services (local) window.
4. Select all the contents of the Windows distribution folder, and then delete them.

   Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
6. In the Services (Local) pane, click automatic updates, and then click Start.
7. Restart the computer, and then run Windows Update again.

You can also follow the link below:
 
You cannot install some programs or updates
 
http://support.Microsoft.com/?kbid=822798
 
I hope this helps.
 
Concerning
Rehman - Microsoft Support

• Need help with windows update please!

  Tried for months now to get windows update to work properly. I still see a message pop up in my lower toolbar, that says: windows cannot verify the updates, with a red x. I'll try to update manually and it shows 0% all the time. When I go and check to see if there have been updated, it will show a little from time to time, who have downloaded successfully, but believe that is made during a unrolled task he is set to make only 1 or two from time to time will show. I don't know what else to do. It's Windows Vista. Help, please... My Windows defender seems to fine day. Help, please... Thank you...

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Hello. Need help with Windows 8 for Windows 8.1 update

  I have brand new computer and need windows update 8 for windows 8.1 but when I try to update the store and click on the free updated windows 8.1 I got the message "not available". I downloaded and installed the KB 2871389 update but without success. My OS: Windows 8 64-bit language (version 6.2 version 9200)

  Hello. Thanks for the quick response, but the PROBLEM IS NOT RESOLVED.

  I did everything you told me:

  1 create the installation media for Windows 8.1.

  2. "Download Windows 8.1.

  3. "How to create a Bootable USB or a DVD with an ISO of Windows 8 or 8.1"

  4 picked up the product with magicaljellybean.com/keyfinder/ key

  I also checked the product key and it is CORREECT but I can't go further cos I got the message that my key is not valid for this edition of Windows.

  MY WINDOWS 8 IS TURNED ON, BUT MY PRODUCT KEY CANNOT BE USED TO UPGRADE TO 8.1

  
  

  Do NOT post in uppercase, because it is considered as shouting and is difficult to read.

  You have 8 SL > you download 8.1 SL

  @@@@@@@@@@@@@@@@@@@@@@@@@

  When you reinstall it will go take the product key and activate the system automatically.

  If it does not, follow these steps:

  "How to activate Windows 8 and 8.1 telephone"