need help with windows update C8000F1A error code

Similar Questions

• Need help fixing windows update 80073712 error code.

  Whenever I try to check for any update I get error code 80073712. I am running windows vista as my operating system. Is there anyway that I can fix this?

  http://support.Microsoft.com/kb/957310

  Above Microsoft link has 3 methods ot try to fix your error Code >

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, SystemRoot is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the Search box, and then click configuration in the list programs. Then click on install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  Mick Murphy - Microsoft partner

• Need help with Windows Update, error

  Whenever I try to run Windows Update, I get an error Code 80070490.  Any suggestions?

  Hi Claire,
   
  The error you receive occurs if there is corruption in the manifest of component maintenance base.  The only way to fix this is to do a "repair" of Windows Vista installation.

  http://support.Microsoft.com/kb/958044/en-us
  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD .

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now .
  • Note When you receive the important Get updates for installation message, click go online .
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help with windows update failures

  I'm really becoming disillusioned and anrgy. In the last 5 weeks or so I installed Windows 7 on at least 11 PCs,... and in all cases, bar 1, I am facing the same problem. I use the Start button, windows update to check for updates after a new installation, sometimes in a few seconds, I get the red error message, other times the normal practice of verification of updates begins. Invariably, nothing happens except the window Windows Update appears to 'disappear' or forget it works, so I start it again, wait forever and finally get the Red writes the error message. I tried the windows online and offline "Fixit and the right sequence is repeated continuously." Yesterday morning at 04:00 [if there are 36 hours] I completed a new installation, over the next 24 hours, I have to have rebooted and retried the windows update at least 4 times. I also tried a couple of different ' FixIt. This morning, becoming almost ready to... Yet once, I tried to use the updates. He did what he normally does... the scan, check... check... NOPE! nothing for you. So I tried the specific 'fixit' MicrosoftFixit.wu.LB.7235772074748435.1.1.Run it tooks ages and ages to complete... but once it was over, no changes because no errors not found. Immediately, I opened windows update via the Start button, click on check for updates... and immediately got written red error with updates. [Screenshots have been taken, timestamped in the seconds between them showing the previous references].

  Can someone help me? Why is - this all of a sudden becomes a common problem? Each PC I put back nine have different configurations, my wireless network has no problem with updates from the manufacturer's websites... SO, WHY THIS ISSUE FROM MICROSOFT?

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Need help with windows update please!

  Tried for months now to get windows update to work properly. I still see a message pop up in my lower toolbar, that says: windows cannot verify the updates, with a red x. I'll try to update manually and it shows 0% all the time. When I go and check to see if there have been updated, it will show a little from time to time, who have downloaded successfully, but believe that is made during a unrolled task he is set to make only 1 or two from time to time will show. I don't know what else to do. It's Windows Vista. Help, please... My Windows defender seems to fine day. Help, please... Thank you...

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Need help with Windows Update, urgent!

  My computer again "Windows can not check updates" and then when I try to get an update, it is said, 'to check the updates, you must first install an update for Windows Update', then when I install it, it closes Windows update, then re-opens saying "Windows could not serch updates" I have no idea what is the problem?

  Try:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.

• 1 1 Windows Update 80070002 error code

  1.	1 Windows Update 80070002 error code
  2.	2 Windows Update error 80072efd
  3.	3 Windows Update, error 8024402C
  4.	4 Windows Update 80070103 error code
  5.	5 Windows Update error 80070643
  6.	6 problems with installing updates
  7.	Update Windows 7 error 80072f8f
  8.	8 Windows Update error 80246007
  9.	9 error code Windows Update 80070422, 80244019, or 8DDD0018
  10.	10 Windows Update error 80070003
  11.	Windows Update error 80072ee2 11
  12.	12 error code Windows Update 8024001
  13.	13 Windows Update error 80200010
  14.	14 Windows Update error 80246005
  15.	15 Windows Update error 80246008
  16.	16 Windows Update error 800f020b
  17.	Windows Update error 800f0826 17
  18.	18 Windows Update error 80244022

  Hello

  1 did you do any hardware changes or software on your computer before this issue?

  2. Since when you are facing this problem?

  I suggest to try the steps mentioned in the link below and check if it can help

  Method 1: Try to perform the clean boot and then try to update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Make sure that return you the computer to a normal startup mode once it's done.

  Method 2: Try to reset components to update Windows from the following link: http://support.microsoft.com/kb/971058

  Method 3: Also I suggest you to install the update from the link system tool below http://support.microsoft.com/kb/947821

  More information: Try following the steps in the link below

  http://support.Microsoft.com/kb/836941

  Hope this information is useful.

• Windows Update failed, error code 646. Microsoft fix - it has not corrected, error code 0 x 80040154

  Update for microsoft works failed, error code 646.  I tried microsoft fix - it for windows update got error code 0 x 80040154, context: high

  See: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/error-code-80040154-windows-vista-home/5088695c-c534-41c5-bdac-518713506875

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with windows 10 update

  I don't have this icon on my desktop so I can not to update or windows 10 reserve

  need help with this, I want to experience windows 10!

  I need a quick answer, I tried to find a way to book and I can't do anything

  

  Try this tool to upgrade your system: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install

• Need help with the update of Windows (OS-Windows 7)

  Hello world

  Recently, I met a problem with Windows update on my laptop (OS-Windows 7). Everything is fine with it, but when I try to install updates (recommended or optional) window says that it downloads the updates, but the progress remains to 0KB and 0% downloaded status. I tried to restart the service of windows update with utility update of windows running, but without success. However, I was able to install updates, most of them associated with Microsoft.NET framework 3.5.1 (I'm not sure of the version of the .NET Framework is installed in my computer). But when I tried to install other updates updated security windows or .NET Framework 4. XX version update, he gave the same answer that I mentioned above.

  I can give my specifications and other information required if necessary.

  Please help me with this problem about the update of windows.

  Thanks for your time and your help.

  Try the following: set never 'Find updates' automatic updates and then restart Windows. Download and install KB3161608.

  http://support.Microsoft.com/kb/3161608

  Best regards, VZ

• Windows Update unknown error Code 8024200 D-Vista x 64 final

  This Windows Update error (Code 8024200d) occurs while trying to install the SIX following updates;

  Update security for Windows Vista for x 64-based systems (KB2378111)

  Update security for Windows Vista for x 64-based systems (KB967723)

  Update for Windows Vista for x 64-based systems (KB2158563)

  Update for Windows Vista for x 64-based systems (KB2345886)

  Update for Windows Vista for x 64-based systems (KB970430)

  Update for Windows Vista for x 64-based systems (KB972145)

  The error occurred during the installation of updates with the Windows Update service, after that a new installation of Windows Vista Ultimate (SP1) on a single licensed OEM DVD.

  This is not the first time I installed this version of windows and updated entirely on this same system, I think that I did it three or four times in fact. However, I've never had a problem with windows update sends me unknown errors, it's upsetting to me.

  I looked for solutions and have failed to find any answers so the post, I hope someone out there can help me out. All of them seem to be updated recommended, and I fear that my safety may be jeopardized, which isn't a good thing for me.

  http://support.Microsoft.com

  Hi afranc62,

  You can follow the steps mentioned in the link below

  Windows Update error 8024200d

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d

  (The link applies to Windows 7, steps for Windows Vista)

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receipt of answer unanswered - Windows Update, an error code 80070570

  I asked for a response to the above, and J of Nithyananda answered the

  and asked that in order to go further, he (she) needed more information.  I have responded on 03/12/12 and provided the answer.  From today 05/12/12, I have not heard something more on how to get my Windows Vista Basic Home Edition to update my system using Windows Update without error 80070570.  Can anyone help?  Thanks in advance, L. Sal

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Suggestions:

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-AU/Windows-Vista/check-your-hard-disk-for-errors

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

• Windows Update 8007371c error code

  I get the above error code that I read the post on reboot with the CD of windows vista
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/e8393dfc-56ee-4948-8244-cfdc20350e7b

  This looks like a lot of work to install a simple update.

  My computer did not come with the CD of windows vista. It is a HP Pavilion 9340f.  I did a diagnostic CD hardware bootable, but also recovery disks. Vista would be on these?

  It's maybe just time to upgrade to windows 7?

  Visit this link:
  http://www.Vistax64.com/Windows-updates/221296-error-8007371c-when-trying-update-Vista64-update-KB958623.html

  http://support.Microsoft.com/default.aspx/KB/971058

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html