Need receiver para um: Presenter Mouse 8000 da Microsoft - URGENT

Similar Questions

• Wireless Notebook Presenter Mouse 8000

  I have a Wireless Notebook Presenter Mouse 8000,
  the original USB transceiver broken.

  I had a co-worker who has mouse was broken.

  My mouse will pair with this "new" USB transceiver

  I understand that the mice and the Transceiver are matched at the factory.

  Is it possible for me to use this new transmitter/receiver?

  (PS the General functions of mouse work correctly when it is used with a Belkin Bluetooth Transceiver, but certain features are not,
  so I would use the MS USB Transceiver)

  BTW - used with a portable Windows XP

  Hello ETuckUte32,

  Thank you for using the Microsoft answers Forum.

  Yes, the devices are paired at the factory and generally cannot be used with another transmitter/receiver even if it comes from the same group of models or the manufacturer. I would say that it is not possible for you to use a transmitter/receiver from another device and operate it properly or maybe even not at all.

  If you can get some features with a totally different Bluetooth device, then it is perhaps the best, you'll be able to get the device. Find functions and features are reduced when you use the device with a transceiver that isn't made to go with this particular material.

  Hope this helps to answer your question.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless Notebook Presenter Mouse 8000 will not enter pairing mode (part 2)

  I tried the fix in this issue here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/wireless-notebook-Presenter-Mouse-8000-will-not/3a0df437-759e-436D-86FC-90bebf7069ac?tab=AllReplies&TM=1320144127818

  and it does not solve my problem - however the described issue is identical.
  My Presenter Mouse 8000 has a permanent green light on the bottom, pressing the button on the dongle (receiver) lance the pairing wizard who tells to press me the button of the mouse for 5 seconds - I followed these instructions and the unit is not pair.  I think (I remember) which she flashed red and green when it is matching, however in my case, the Green led is permanently on and not blinking.
  I changed the batteries for new ones - that has not fixed my problem
  I tried on another computer matching - this does not solve my problem
  I tried to install 3 different versions of the software (versions 8.0.25, the version on the CD that came with the mouse and the plus up to version 8.2 of the date), this does not solve my problem.
  This mouse has worked in the past-, so I do not understand why it would stop working now after a battery change?
  I'm on Windows 7 x 64 both computers, with that I tried to use the mouse.
  Are there measures other that I can take to solve this problem?
  Thanks in advance for your answer

  Hello

  Method 1:

  I suggest that you try to do a system restore and check whether the problem is resolved.

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Method 2:

  I suggest you update Bluetooth drivers on the computer and check:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If it still does not work, then it may be due to a defective material.

• Generic adapter Bluetooth doesn't work is no Presenter Mouse 8000

  I had this Microsoft Windows Wireless Presenter Mouse 8000 for several years and have enjoyed the work and general use. However, lately, I've had problems connecting with the mouse does not stay connected properly and it stops working. I moved the various Bluetooth USB adapter, but still nothing. I have "re-matched" the adapter to the mouse and this may work for a while, but then that is not.  Now, I get the message 'Generic Bluetooth adapter' Code 10, and even after you have reinstalled the software and the latest drivers, this problem has not been resolved.  Actually, it ceases to be worse that I had to use the Mr. Fix - it to find and reinstall other Bluetooth components.  After all, I've done, the challenge is still here... I'm getting an adapter generic Bluetooth could not install correctly and also get a Code 10 on the Bluetooth device RFComm.  I am very frustrated with this, and really need this mouse to work. What can I do to end this loop that I not of miracle!

  I use a HP Elitebook 8540p with 8 GB of ram, Windows 7 Ultimate and all systems updated through HP or Microsoft sites. I uninstalled and then reinstalled the latest version of the Microsoft software for the mouse (Intellipoint). Please, someone help!

  Thank you.

  Hi Larry,

  1. don't you make changes to the computer before this problem?

  Let us try these methods.

  Method 1.

  We can refer to this article and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-in/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2.

  We can refer to this article and check if that helps.

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more: http://support.microsoft.com/ph/7746#tab1

  Let us know if you need help with this question, we will be happy to offer you our help.

• Microsoft wireless notebook presenter mouse 8000 does not

  Original title: driver error.

  Hi, I can't get my presenter 8000 laptop wireless Microsoft mouse to work with the windows platform 8. I installed the drivers from the CD, but when I check the status on the screen "devices and printers", it shows a State of disk error. "  Is there an updated driver for this device I can use to make it work?

  Hi Toni,

  For you help I would be grateful if you could answer the following question:

  What is the full error message showing in Device Manager?

  Follow the troubleshooting methods and check.

  Method 1: Run the hardware and devices Troubleshooter and check.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + W on your keyboard.

  (b) type of Troubleshooting , click Troubleshooting.

  (c) click on see all.

  (d) click on hardware and troubleshooting of devices.

  (e) click on the Next button to run the troubleshooter.

  Method 2: I suggest to uninstall and reinstall the drivers from the production site;

  Check out the link to download the drivers;

  http://www.Microsoft.com/hardware/en-in/d/wireless-notebook-Presenter-Mouse-8000

  Note: Select the appropriate operating system to download the drivers.

  Check out the link;

  Troubleshooting: mouse

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/mouse/wireless-Bluetooth

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Drivers for Microsoft Wireless Notebook Presenter Mouse 8000

  To set up my new PC (the old map of his mother's dying), I found that I had the CD with drivers that match my Presenter Mouse 8000, and I would like to know how I can get the drivers from Microsoft, preferably via download.

  Hello Mike Alcivar,.

  You can get them here ,

  Just fill in the information and hit go and download the software for your mouse

  Thank you

  jlluitj Josh Luitjens - self-taught computer Techhttp://www.pchalp.com/

• Disconnects Presenter Mouse 8000 on Windows 7

  I have Win7 64-bit on Dell Vostro 3550. I bought a new mouse and installed all new webpage software MS. Souris was working very well connected after usig BT new device option. Unfortunately, after a minute or two mouse does not work. Even when I turn the mouse it is unable to reconnect with the computer via Bluetooth.

  I have the mouse: "Microsoft Wireless Notebook Presenter Mouse 8000" on my list of BT devices.

  It does not work even when I use the dongle of MS. But on the first tme, I installed all the software he has worked well with dongle. I want to use the mouse without dongle, my computer has connectivity BT.

  What should I check/install to fix the problem.

  PS.
  I changed the batteries twice.

  After having reinstalled drivers and Intel PRO once more works fine on WIN7. I hope it will be the same tomorrow.

• Windows 8.1 Bluetooth MIcrosoft Wireless Notebook Presenter Mouse 8000 not connected whenever I turned on the PC

  I have windows installed 8.1 and since I did it whenever I turned on the laptop Dell Bluetooth mouse not connect I need to remove it and pair it again.

  Before the upgrade to windows windows 8.1 8 it was working properly.

  What can I do?

  It worked well. The difficult thing was to remove all drivers before installing new.

  Thank you

• Wireless Notebook Presenter Mouse 8000 does not enter pairing mode

  I replaced the batteries in the mouse, and now I can not place the mouse in pairing mode.  When I turn the mouse on the green light is on continiously.  When I press the button of twinning on the mouse it alternates with a flash no matter how long I hold the button for red/green.

  Any ideas?

  Hello
   
   
  1. have you checked this mouse on another computer?
   
  First of all I ask you to download and install the latest version of the IntelliPoint 8.0 for Windows 7 software. Here are links to the software.
  For 32-bit operating system.
  http://download.Microsoft.com/download/1/3/B/13B6BCAA-603C-4F7C-B03E-2DC23E307D47/IPx86_1033_8.0.225.0.exe
   
  For 64-bit operating system.
  http://download.Microsoft.com/download/F/F/2/FF20250F-0C25-4139-BCAD-CFC5EABFA159/IPx64_1033_8.0.225.0.exe
   
  Here's how you can do it.
  a. remove the device from Bluetooth devices.
  b. turn on the mouse and select "Add Device".
  c. immediately after selecting "Add Device" push the Bluetooth button on the bottom of the mouse (must flash red/green on top).
  d. move the mouse as I used it (probably 10 seconds or more) until the mouse showe up as a new device in the window add the device.
  e. notification of automatic driver installation will pop up.
  f. should be able to use the mouse now.
  
  Also, see installation and configuration information in the article below.
  http://www.Microsoft.com/hardware/mouseandkeyboard/IntelliPoint/Readme/en-us/default.mspx#installation
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BT Presenter Mouse BT & Non - MS Dongle

  Hi - I have a HP DV6131 laptop with a Micro Bluetooth IOGear donge.  I use to connect / sync my Blackberry and have had no problems.  I just replaced my mouse USB MS with a MS BT Presenter Mouse 8000 and deleted then re-installed Intellipoint 6.3.  During this operation, I was prompted to insert the Dongle MS and I choose to use this foreign unit; mainly because of its size.  In any case, I could discover and connect with the mouse seems to work very well.  However, after installation of the MS my laptop mouse hangs at the initial POST screen.  If I remove the IOGear Dongle before you start and then insert it at the windows screen, everything goes & works well.  I updated the Broadcomm stack to the latest drivers without change.

  Any help would be appreciated.

  I rebooted the Microsoft mouse driver, and this seems to have solved my problem starting.  I was able to cold start and restart without problems, with the mouse, connection and functioning properly.  My Blackbery is also able to connect & synchronize via BT without problem.  This issue can be closed.

• Microsoft 8000 presenter mouse

  I bought a Microsoft 8000 presenter mouse and I can't seem to work with internal bluetooth in my laptop.  When I use the supplied Bluetooth transmitter/receiver, it works fine.  When I run the connection Wizzard, it tells me the ' authentication for... went wrong. "

  Anyone know how I can get this mouse works with internal Bluetooth?

  Thank you

  Jeff

  
  

• HP 5219urf (RX1): HP wireless receiver 5219urf (RX1) - several mouse compatibility?

  Gentlemen.
  
  I just got an old wireless keyboard of HP 5219urf and 5219urf from Receiver USB (RX1) to a thrift store and I have a few questions.
  
  Is there any other wireless mouse that can work with this receiver outside the M97iu (M1) original unit delivered with the keyboard? I don't have the mouse and it would be certainly a comvenience if other mouse HP, or same mouse Logitec or Microsoft may work with this receiver.
  
  Are there drivers that need to be obtained? Guide to the user for this set - up does not mention the installation of all the drivers so I'm thinking that the receiver is plug ' n play for HP computers. I'm planning to use these devices with a HP Pavilion a1777c under Vista Home Premium desktop computer.
  
  Thanks for your interest!
  
  Grant

  @GHagen, welcome to the forum.

  Mice are configured to work with a single receiver.  Therefore, it would strictly be luck if you found one that would work.  There could be such a thing that the codes are repeated each mouse as much.  Who knows.  I lost the receiver to my Microsoft mouse and I have one exactly like it, but the receiver will not work.

  With respect to the software and drivers for the keyboard, I plug it into the computer and run updates HP to see what he finds.  In addition, you can go to Device Manager / keyboards / right-click on your keyboard / select Update driver software / search automatically for updated driver software.  There is a driver available it will download and install it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is solved.f

• MS Wireless Laser Mouse 8000 charging light illuminates any

  Recently, I noticed that the witness of charing on my MS Wireless Laser Mouse 8000 is not lit at all when on the charger. Not green, not red, not flashing, not stable. Just nothing.

  So far, it works again, it seems to charge, but I would like to know if there is a problem. I've done the obvious things (for me): clean the contacts taken care to what the charger is plugged at both ends.

  Any suggestions?

  Thank you.

  Ken Isaacson
  

  KJIsaacson,
  As long as the mouse still works normally and is in charge, so it's nothing to worry about.  Probably the LED went wrong but which would not affect the operation, he is only there as an indicator for you do know that the load.  If the unit stops to load then do it repaired / replaced.

  Let us know if you need more assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mobile memory Mouse 8000 Microsoft has stopped working.

  Worked for about three weeks, then stopped working after my battery laptop flat and stationary. Uninstalled and reinstalled with closed disc, but did not work. Downloaded manually the software nothing works. No light or anything like that. Computer says device working properly. Using Windows Vista 32 bit laptop with bluetooth. Also does not show the device in the bluetooth Control Panel devices. Frustrating...

  Hello

  Have you tried the mouse on another system? The bluetooth devices work on this (other system
  that this mouse)?

  References to Vista also apply to Windows 7.

  Try to reload the most recent drivers.

  IntelliPoint 7.x - drivers
  http://www.Microsoft.com/hardware/downloads/default.mspx

  ---------------------------

  If BlueTooth devices do not work on the system that they could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems
  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  --------------------------------------------------------------------

  If it's the mouse:

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  Microsoft Mobile Memory Mouse 8000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=098&active_tab=systemRequirements

  Most have 90 days from the date of the first incident/telephone support.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

  I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

  It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

  Any suggestions appreciated

  Hello
  Before starting any discussion can you please tell us which laptop model you have?

  BTW: What is your BT mouse has own dongle BT?

  See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

  Good bye