Need recovery disk or drivers for my Qosmio G35-av650

I have a problem: I bought my laptop Toshiba Qosmio G35-av650 United States. I'm now in RUSSIA. Yesterday my windows are down and I have lost my disk to start the system with the software, could someone tell me what I'm doing, where I could buy the startup disk or download?

Thank you

Hello

I guess the original recovery media can be ordered in US only. In any case, you can install your own operating system. All the drivers, tools and public services should be available on the support page American - http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

Check it out!

Tags: Toshiba

Similar Questions

  • Qosmio G35-AV650 does not start after format

    Okay, so I downgraded/upgraded my computer back to XP from 7 a month ago.
    Yesterday, I went to the library for all my updates and whatnot that I neglected since the upgrade. When I turned on the computer in the library, it would not be loaded the office correctly and an error box open stating that it was impossible to recover the THotkey. It turns out that my feature key drivers took a dive. I've done everything I can to solve the problem. Nothing worked, I decided to reformat.

    Early upward the dinosaur this afternoon when the format is finally finished, it would not fully boot screen where you are asked which language you want to use, what time format, all of these bases. I tried to reboot several times, finally tried safe mode, even to reformat again, nothing works.

    Now, seeing as I was only reformat to XP in order to enter my card default sound drivers to see if they would work on 7 (the company that made my card was bought shortly before 7 was released and that they still need to make new drivers), I decided to say screw that it and any format the computer back to 7. When it loads everything from disk (disk? drive?), it goes to the screen asking what disk I want to install, it says that I have no disks on which I can install it.

    I came across this problem before, the first time that I put 7 on the computer. Since I have two hard drives, it needs the RAID drivers that connect the two. I downloaded several different, all for Toshiba Qosmio G35-AV650 RAID drivers, but it detects all the drivers. The way I do it is to put on a flash drive and tell the computer to get them from there. I do everything the same way I did before, but nothing works at all. I tried to go into the BIOS settings, but I have no idea what I could do.

    I'm tearing my hair out trying to figure out what I can do here, but I'm completely lost. Any ideas?

    You use a generic Windows 7 disk? Or a Toshiba Win7 upgrade disk?

    Basically, you need the drivers SATA F6 (INFs) on a USB Flash drive during the installation of Win7. The version of Vista should work fine in Win7.

    You can change the RAID settings in the BIOS to "JBOD". First, make sure you back up important data.

  • The satellite C670D-109 need recovery disk

    Hello
    I need recovery disk for my laptop because my hard drive crashed and I had to replace it with a new one.

    How can I do?

    Drive recovery hard file I was able to save her...

    Hello

    Recovery disc can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Satellite L300 - 11 M - need recovery disk

    Hello everyone,

    I reinstall my Windows Vista, the last partition before reinstaling Vista is 3.2, but after you reinstall and download driver software from the official website I score 3.1. I think that there is something wrong?
    So by default when I bought my laptop, I have not receive any disk with drivers or Vista.

    I have two questions.

    1. can I ask disk with drivers for my Toshiba support model?
    2. If I reinstall my Vista, can I lose my warranty?

    Thank you very much!

    bILLY ;)

    Hello

    The recovery disc can be ordered here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Your warranty does not cancel if you reinstall the operating system Vista
    Any installation of software donation affect the warranty of the t

  • Can I use my Windows 7 Edition recovery disks Home Premium for a clean install on my old Windows XP computer?

    Hello world!  I hope someone can help.

    Can I use my Windows 7 Edition recovery disks Home Premium for a clean install on my old Windows XP computer?

    If this is a recovery from a different computer disk, you are unable to do so.

    In addition, if you were to format the computer, you will need to have a way to reinstall a copy of Windows with a genuine license.

    The best option if you need Windows 7 Home Premium is to buy a genuine license then you can make a custom (new installation).

    Where can I still get Windows 7?

    Version upgrade - Microsoft Windows 7 Home Premium Upgrade

    http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

  • Where to find drivers for XP Qosmio E10-1KCDE

    Just reinstalled my windows XP OS because the older operating system crashed.
    Where can I download drivers for laptop E10-1KCDE?

    TIA

    Hello

    The European driver Toshiba page provides the Win XP drivers for the Qosmio E10 PQE10E series.

    Maybe I'm wrong, but I think the Dynabook Qosmio E10-1KCDE series seems to be a Japanese model.

    So I'm not sure if XP drivers from the European page will run on this laptop model. However, you can try to install a single driver. Maybe you are a lucky man and pilots will be compatible.

    Welcome them

  • I installed win8.1 on my 8.9 inch A150. It works, but I need to earn 8 drivers for touchpad.

    I installed windows 8.1 on my 8.9 inch A150.  It works, but I need to earn 8 drivers for touchpad.

    After a small violin in microfinance on the value, everything worked fine, except the touchpad.  It is installed with a generic PS2 Mouse which means only a slightest touch sent the flying cursor.  I installed the Synaptics drivers, who work except it keeps hanging up.  The computer continues to operate and a USB mouse still works until it wakes up the touch pad.

    Anyone know where to get a driver for the touchpad, difficulty this or other ideas.

    Thanks, Clark

    No, the door is on the underside of the body of the computer - turn it over, it will be on the left side near the battery - remove the 2 tiny screws - the door opens - you will be able to watch video HD with a chop - deeper colors too

  • A possible recovery disk full mane for vista without making a backup?

    A possible recovery disk full mane for vista without making a backup?

    Hello

    Check with your system manufacturer, their books online and as well as their forums (if any)
    For more information on the procedure and requirements to make an OEM recovery disk type.

    ----------------------

    This will help you do a repair disk that could be useful, see explanation above
    of the web page.

    How to create a Vista recovery disk (it's a type of repair recovery disk and not the same as)
    the OEM your system maker version would provide or have methods for you to create).
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    These could help if it requires a full backup.

    How to restore the complete computer from a complete backup and restore Image in Vista
    http://www.Vistax64.com/tutorials/99718-restore-complete-computer.html

    How to create a full computer backup and restore Image in Vista
    http://www.Vistax64.com/tutorials/99709-backup-complete-computer.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.

    I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.  Laptop is the Intel Pentium M processor 2.00 GHz RAM, operating system, 32-bit on x 86.  My resolution is not at the right level and videos have hard play.

    I went to the ATI site and when I try to download their drivers, they will not be installed because they do not recognize the Windows 8 operating system.  The site of Dell's Windows XP operating system.
    Thanks for any help.
     
    [Moved from comments]

    Resolved - finally

    2 essential steps
    1 https://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_179256&isLegacy=true#Issue5
    Reconstructions of Dell should be loaded in a particular order until the drivers are installed, that is to say the controllers then the drivers for the chipset and resolution etc. They are specific to this.
    then;
    2 CharlesGrimes comment '... ". searching on my computer for the Dell under the old windows files and the old drivers were loaded. "I had tried this but not good. So went into a ghost of Dell image when the resolution was good on Win7, recovered files in windows/System32, which has old drivers. Does the update in graphic cards [Device Manager] driver and manually looked through above the files recovered from previous instal win7 and YES they charge this time.
    Oh what a relief to have a higher resolution. Experience had taught me how snappy Win8 is, I picked up a shortened bunch of ways to circumvent the operating system, and it is growing on me. WIN8 Pro works best on this old machine than its original Home XP and Win7.
    Thank you Carlos and others for your info that led to my positive resolution.
  • Need of Synaptic Touchpad drivers for Dell XPS L502X to Win-8-Pro

    Hello

    I need synaptic touch pad drivers for my DELL XPS L502X for Windows - 8 Pro.

    Can't find the official dell drivers download page.

    Without these drivers, my contact is not touch double to scroll up and down.

    Help, please.

    Thank you

    Hard

    Try to Synaptics Touchpad http://downloads-us.dell.com/FOLDER00800134M/2

  • Qosmio G35-AV650 - using the recovery CD, I get a message - MACHINE BAD!

    Hey there,

    After that I got my Qosmio G35-AV650 fixed by Toshiba, since, then using the recovery DVD that comes my machine is evil!
    I figured out that they changed the name in the BIOS for PC Portble, up to now, I have not found the tool (DMI) to get the fixed string...

    Could someone be so kind to let me this software?

    Thank you in advance...

    Hello

    It really seems like the laptop technician forgot to update the right information in the DMI!

    I searched on the Toshiba site for useful info because this laptop seems to be designed for the American market only.
    I think I found a useful site;

    Check this box:
    [How to eliminate the error message "Machine hurt" during the restoration of the image of the software factory: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1010 7032xml & sliceId = & dialogid = 26604851 & stateId = 1% 200 %2 026606094]

    But note; You should check whether the Uutility is compatible with your laptop. If this isn't the case, then contact the ASP in your country for an update!

    Good bye

  • A few Questions on the Qosmio G35-AV650 series

    I have some questions that I would ask to my Qosmio G35-AV650.

    1: I've updated the BIOS to v1.4 (2005), to v3.3 (2007), to install Vista.
    Vista does not work so I removed it - I guess that I need to update the drivers again.
    In any case, I got my PC to normal - delete the partition allocated to Vista and reset the boot record.
    However, there was something that happened to my pc. The model has been replaced by "Laptop".

    My DVD DO NOT work for recovery. It says 'BAD COMPUTER'. IM wondering how it could have happened.
    If anyone could shed some light on what might have changed the name of the template, do so.
    The only thing I can think is the update of the BIOS. Any ideas?

    2: my HARD drive crashed at 1 point of time before. In order to
    avoid any loss of data, I have intertwined around hard drives and reinstalled XP on the secondary HARD drive.
    However, this is somewhat troblesome. First of all, the Qosmio player no longer, because it is
    the disk of HARD original 1. Secondly, if I did a reinstall on 1 HARD drive, it would remove the Qosmio Player?

    Third, if I put the hard drives back to the initial placement and boot from HDD 2, HDD 1 IS NOT recognized by the PC.

    It seems I have TO boot from HDD 1 for 2 HDD is picked up by windows.
    Is there a way to test PC to start from 1 HARD disk then boot from the disk HARD 2, eventually recognize two hard disks?
    Or is there a way to manually "load" both hard drives?

    3: what would you recommend to do if Windows won't recognize the Bluetooth device. I know that his work.
    I installed a Virtual Machine and installed the bluetooth in it. It is during the driver installation process
    that the installation crashes with devices NOT picked up by the operating system. Any ideas? I can't use the recovery DVD trying to install
    the original drivers [see #1].

    How can 4: if I'm using the standard Windows Xp CD, I load the Toshiba RAID drivers? The only thing I see
    includes a floppy drive, which does not have the kaptop.

    I know this is a long post :)
    Thank you for your responses and reaing.

    Man, these are some deep questions. Your laptop looks new, under warranty? If so, go back to Toshiba and make them understand the 'thing'. These things are problematic I know... it is a little hidden from any sale side isn't it.

    If you want to put in Vista, just follow all the instructions in the Forum of Francisco - you can tell that's the one with the most comments. If you follow the messages from scratch, you will be able to get your business laptop.

    Francisco is our leader of the sect. He's awesome. He saved us where Toshiba does not have. Welcome to the fraternity.

    Brother of Tay.

  • Error message 'bad machine' on Qosmio G35-AV650

    Hello
    Please help me with the message 'bad machine' in my book... How can I update DMI?
    Thank you!

    Hello

    Please visit Qosmio G35-AV650 homepage and check the downloads and support bulletins. If you cannot find anything that can help, contact the nearest authorized service partner. They can do for you.

  • Need recovery disk or recovery for my Tecra A11 image

    I have a Toshiba Tecra A11 and had a problem with the operating system, so a friend offered to fix it for me, when he said fix what it meant try and install completely wrong Windows 7, but at the same time destroy the removal of the partition, all built in Windows 7 pro installation.

    So now I need a file or a CD specific boot to a USB key. Anyone know where I can get one or download one without having to pay 35 quid for a new Toshiba?

    Thank you
    Tom

    Recovery file cannot be downloaded. Toshiba offer as only recovery disk. Download an iso file won't help you much because you will not be able to start the recovery image installation.

    Either you find someone who has the same Tecra and use its disk or you must order one on https://backupmedia.toshiba.eu/landing.aspx

  • Need recovery DISK for Windows VISTA

    Hello

    I don't have my recovery disk for my laptop but now I need it. Know kindly if any, let me know how to get it and how much it costs.

    Thanks in advance!

    I think that this value is Euros.
    Do you need the delivery to the India?
    I think it's possible, they should provide the media in most of the countries all over the world

Maybe you are looking for

  • What to redirect to junk sites after my google search?

    When I did a google search and click on my selection that seems often redirected to what I call spam sites, for example, http://www.monstermarketplace.com/searchw50.asp?q=painting+new+stucco & ref = 97569 64436 This seems to only happen lately. Thank

  • SM Bus Controller - missing driver - HP Pavilion dv6-6b08sa

    Hello I bought a HP Pavilion dv6-6b08sa jut. I love the laptop.  I did a clean install of Windows 7 Ultimate 64 bit with Service Pack 1 - updating because I didn't want to not all the software that HP put out there for me - no offense HP, I don't lik

  • LabVIEW for 89410A pilot

    Hi all I'm looking for driver to LabVIEW for HP 89410 I tried to pilot network and site manufacturer instruments Could you help me Concerning

  • Windows Update error 80070643__

    I enabled the functionality of MS Office Update.  When I tried to install all of Office 2003 updates, the updates have not been installed and the message.  The Office 2003 has been successfully installed on Windows 7 Ultimate version.  I followed the

  • Windows vista Setup will not accomplish

    replaced the hard drive, try to install windows vista on a dell vostro 1700.  He will arrive at "finish installation" and just sitting there.  eventually the screen is empty except for the cursor... why it ends normally install? E-mail address is rem