Need settings for Services for Vista Home Premium, 32-bit SP2, Server 2008

Several problems.  I know that I have too many services running that shouldn't be and need to put them back where they should be. In other words please. Auto, delayauto, etc manually.

My pc has little memory left. I can't save anything as it says that I have installed more. That says it's a problem of the file configuration. It wont let me save the files, and I need to backup my pc before making a return to the factory. That I really don't want to do. My program disks were taken.

I know that my services settings are wrong.

I can not also disconnect my mass storage, it says a program to use it and I have to wait. D - COM is the only thing that is using it, and this isn't something that I can't stop, no option for.

I'm so frustrated and now I tells me I need to upgrade to Windows 7. I can't afford it. I am disabled and have an income that is below the poverty line.  So, I need to keep this Vista going as long as possible. I cleaned up the files, etc. defraged. It made no difference on my drive "D". He said I'm a little less! 5% room left for my computer to run. I made the mistake at time of backup from my pc to the drive d. I used the wizard to clean off. He didn't not work and I do not know how to open it. Or what I want. The fix - it Center goes through my pc and tell me what is wrong and when I check what he says of difficulty, they are already there, which suppose to be. I get a lot of false positives.

Need a miracle.

Can help you.

Hello

"I'm so frustrated and now I tells me I need to upgrade to Windows 7."

You do not have to upgrade to Windows 7.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

"It makes no difference on my"D"drive. He said I'm a little less! 5% room left for my computer to run. «I made the mistake at the time of backup of my pc on the d drive.»

D: drive / Partition is usually your recovery Partition.

Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

You will need to ask your manufacturer for proper sequence.

2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

Also ask them how to make records.

Your D: Recovery Drive is should not be used for backups, defragmented, etc..

There are backups on an external hard drive.

To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

You cannot save installed programs unless you do a complete picture of the PC, which would not solve your problems.

Here's how to back up and restore your files:

"How to back up your data.

http://www.wintuts.com/how-to-backup-your-data

"How to restore your files.

http://www.wintuts.com/how-to-restore-files

See you soon.

Tags: Windows

Similar Questions

  • Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

    I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

    1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

    2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

    Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

    I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

    There is a difficulty that recently came on the HP Forums for 64-bit Vista:

    http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

    All you have to is to download the mentioned file and replace some dll with those provided.

    The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

  • Reinstall Vista Home Premium 32 bit SP2

    Not good with computers... need help... very much appreciated... I ran into the horrible black screen problem... I can't start in safe mode, no problem, but can only access via the normal and Task Manager normal mode still doesn't work well... internet and other programs will not work... I tried many options and now looking to do a reinstall of Vista Home Premium 32 bit SP2

    Question is how can I do reinstall without deleting all my personal files? Is this possible? If Yes, how should I do it... as very detailed information is appreciated as I'm not tech savy... Also, if it is not possible, what is your recommendation to save my files before reinstalling? External hard drive?

    I appreciate any help I can get. Thank you!

    A resettlement removes all the info.

    If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • I use Windows Vista Home Premium 32 - bit SP2. Is there a way to delete records of only updates of failed or cancelled in the history of Windows Update?

    I use Windows Vista Home Premium 32 - bit SP2.

    Is there a way to delete the records of 'detail' of only updates of failure or cancelled in the history of Windows Update?

    I just installed hotfix for Windows (KB947821).

    It looks like a lot of my earlier 'failed' and 'Cancelled' updates are automatically updated and installed, and successfully, I might add.

    Some dates in some records do not seem much sense. I guess I'm looking for a way to select the records, I want to get rid of.

    Help?

    Hi Jeffrey,.

    It's not really a taken way in charge to remove only the cancelled or failed updates. These are taken from windows logs and displayed in the history. Steps that Jose post is a way to remove all files in history and will remove all updates as well as a failed/cancelled updates successfully.

  • Error code 8024200d when installing SP2 for Vista Home Premium (32 bit)

    I use Vista Home Premium (32 bit).  When Windows Update recently
    tried to install SP2 (several times), the quoted error message
    repeatedly prevented installation.  Google showed a number of similar
    references to the problems associated with SP1 (from one year or if there are and less).  Is
    There is a work around for this message because it applies to SP2?

    Biggar Gordon
    Houston, Texas

    Hi Colonel biggs,

    Welcome to the Forums Microsoft Vista

    This problem may occur if one of the following conditions is true:

    · A program on your computer interfered with the installation of the service pack.

    · There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

    To resolve this problem, try each resolution in the 'General resolution"and the"Advanced Troubleshooting"section in the order in which they are presented. After trying a resolution, try to install the service pack again. If you can't always install the service pack, try the next resolution.

    Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

    Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

    If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process

    Solution 2: Run the system update readiness tool

    System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

    1. click on Start

    2. collapse this includes it in the Search box, type System, and then click System in the programs list.

    The operating system is displayed as follows:

    · For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.

    · For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

    After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

    Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

    1. Close all applications and restart your computer.
    2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
      1. Right-click the icon of the third-party program.
      2. Click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
    1. As soon as you close the antivirus or the antispyware software, try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

    http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

    1. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

    For more information follow the link below:

    http://support.Microsoft.com/kb/947366

    Hope this information is useful.

    Suresh G
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

    After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

    Do your system restore, then:

    Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    See you soon.

    Mick Murphy - Microsoft partner

  • Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

    Hello

    The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

    I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

    P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

    Any suggestions or ideas? We are scratching our heads on this one.

    Thank you in advance for your time and help

    Tim Kerr

    Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

    See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~

    Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Vista home Premium 32 bit SP2: iTunes 10.1: there is a problem with this Windows Installer package. A program required for this install to complete could not be run.

    I worked on it for about 3 days now. It's driving me crazy. I tried everything I could find to try to solve this problem.

    When installing iTunes it stops and a box will then appear to me said "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support provider or package. "No error message or anything, that's all I get. When I hit the only button I can hit the OK button, it continues to install QuickTime. Sometimes, it will install the iTunes file and the shortcut, but the shortcut does never work and the iTunes file is always empty. I have download the installer directly from Apple.com and save to the desktop, a new copy after each test (just in case).

    Here is a list of what I've tried:

    Yes, I am the administrator of the computer with admin abilities, yes I checked run this program as an administrator. I also made sure to stop all this as possible could interfere with the instillation, including my anti virus and what not even before I tried a clean boot.

    Is there anything else I can try?

    ~ Thank you

    I don't know whether or not the original poster solved their problem.

    See if it works for you.

    Error 1719 Windows Installer Service inaccessible during the installation of the applications.
    http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

  • I get error 800800005 when I try to update windows. Vista Home Premium 32 Bit SP2

    I get error 800800005 when I try to update windows.

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

  • The contract of affreightment for my VISTA Home Premium 32 bit [oem] will work for VISTA Ultimate OEM Dell disk shape.

    Mine has the Express Vista Upgrade Help Express upgrade DVD from Dell for Vista Home Premium 32 bit in March 2007. [XP to Vista was a promotion at the time]. I did a clean install of vista Home Premium 32-bit using the DVD upgrade at that time here.

    Now, I got Dell VISTA 64-bit DVD to reinstall [Dell Rep told me that she did not have the Vista Home Premium 64-bit and is - this okay for me to receive the DVD of reinstalling Vista Ultimate 64 bit-for which I accepted]

    Resettlement 64bits Ultimate DVD arrived today, in an envelope. I can't find a certificate of authenticity [COA] inside. However the sleeve that wrote this about the following:

    "The Microsoft certificate of authenticity [COA] operating system is a multicolored label located on the side or the bottom of your computer. The certificate of Authenticity contains the product key code, which may be needed to complete the installation of the operating system. »

    Now where's position? Can I go ahead with my clean install of Vista Ultimate 64 bit with the disc I received after formatting my drive where my Vista Home Premium 32-bit far is present.

    I am owner of a single computer in the home environment.

    Snow

    As Dell-Jesse has already been said, "COA at the back of the system is ONLY for Vista 32 and 64 bits and NOT Vista Ultimate or business House. Computers Dell will not have a certificate of authenticity if you use the Dell supplied DVD on a Dell computer. The bios detects that it is a Dell disk and a Dell system and is not a certificate of authenticity'.» Good luck with the new OS!

  • Vista Home Premium 64-bit system file dllhost.exe is missing.

    System file dllhost.exe is missing.  sfc/scannow could not repair/replace it.  How can I get a new copy of the file dllhost.exe for Vista Home Premium 64-bit (for an AMD64 machine)? Thank you.

    This is an extract from the log after running sfc:

    00000861 [SR] cannot repair the military record [l:22 {11}] "dllhost.exe" Microsoft-Windows-COM-mother surrogate, Version 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
    2010-11-16 10:40:53, info CSI 00000862 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
    2010-11-16 10:40:53, info CSI 00000863 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"Dllhost.exe '; source file in the store is also corrupted

    System file dllhost.exe is missing.  sfc/scannow could not repair/replace it.  How can I get a new copy of the file dllhost.exe for Vista Home Premium 64-bit (for an AMD64 machine)? Thank you.

    Extract the exe of your Windows DVD:

    http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • need an iso file to install windows for windows vista Home premium 32-bit

    I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition

    Hello

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon

  • Update Service pack 2 for Vista Home Premium; A LOT of mistakes happened

    Hello

    I have problems with the installation of Service Pack 2 for Vista Home Premium.
    -tried 3 x to install it via the updater failed.
    -tried downloading manually in vain.
    -Setup always failed.
    After trying to install it manually and after restarting, I logged. Then Windows asks me to activate now.
    -J' tried to activate Windows online, and retype your product key, but once I typed the product key, the Activation of Windows Client stops working. The problem is InPageCoFire Error Status Code: c000009c
    So I try to use SystemRestore for her. But the same thing happens.
    I hope you can try to help me...
    -Kirstinkaye

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Have to do, need to the ISO for Vista Home Premium.

    Hello! :)

    Need help to get the link for Windows Vista Home Premium 32 bit. An upgrade to keep files and the system does not start on the desktop!

    Please help :)

    Good to hear.

    See you soon.

  • service pack 1 and 2 for vista Home premium.

    error with service pack 1 and 2 for vista Home premium. INSTALATION failed to update. Error CODE 80070490

    http://support.Microsoft.com/kb/958044

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for