Need systemboard Qosmio F30-111

Similar Questions

• For Linux - Qosmio F30-111 RAID drivers

  Hello

  I have a Qosmio F30-111 and I need the drivers for the Controller Raid for Linux. Can someone help me.
  I have RAID-0 and the laptop does not start. It displays the XP logo and restarts. So I need to boot from cd or USB key to access or repair the raid partition.

  Thank you
  Antonio Jose

  See also http://newsletter.toshiba-tro.de/main/

• Upgrade Vista on Qosmio F30-111

  Hello world

  Thought IA´m, purchase a Qosmio F30-111.
  It comes with XP but I want to upgrade to Vista. Everyone set to upgrade to Vista in this specific model without any problem? I already heard that upgrading to Vista in some Qosmio models is a pain...

  Thank you very much help

  Hello

  The installation is easy, but don't forget to install the RAID driver first!
  Without this driver, you will not be able to install the OS on the HARD drive!
  But all the drivers are available on the Toshiba page.

  The new facility is more appropriate to replace the upgrade from XP to Vista because not all XP utilities are compatible with the new Vista operating system!

  Check it out.

• Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

  Hello!

  I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

  Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
  The situation was:
  -The sound device has been recognized;
  -The MIC works (but I can't hear it);
  -The speakers do not work!<- the="" real="">

  Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
  I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

  Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

  Sorry for my bad English,
  Thank you very much!

  Murilo

  Hello Md2

  You can hear the noise if you plug headphones into the audio?

  If there is his helmet and then the audio device works well.

  If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

  don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.

• Need, updated traditional BIOS for Qosmio F30-111

  I would like to get the update of the traditional BIOS as described in updating BIOS FAQ. I have not installed to update windows. (and I don't want to install it)

  If anyone can provide it? version 3.90.

  Thank you

  Hello

  As far as I know, Toshiba driver European page ONLY provides updates of BIOS based VICTORY.
  The trad-BIOS updates are not available on the page of the driver. I think that the traditional BIOS update can be downloaded only by an ASP, so you the user and the password entry.

  Try to contact the ASP in your country and maybe you could get this BIOS by technicians

  Good luck

• Connection S/PDIF on Qosmio F30-111

  Hello, I need some information on the use of the digital audio output on qosmio.

  It seems to have a 3.5 s/pdif out Jack (shared with headphones).

  There are 2 audio cables type digital: toslink optical and coaxial 75 Ohm RCA.

  Is possible to use a coaxial cable with a 3, 5 mm jack to RCA converter?
  Or the only way is to use a cable with 3.5 jack converter toslink optical?

  It's RCA-> Jack 3, 5mm Converter: http://aka.fotovista.com/dev/3/3/46000533/g_46000533.jpg
  It's cable Toslink, Jack 3, 5mm converter and more: http://aka.fotovista.com/dev/7/5/46000157/g_46000157.jpg

  I'm not an audio specification, but I found some interesting info:

  (1) coaxial RCA is the most popular Digital Audio connection. Cables and connectors have an impedance of 75 Ohm and used to connect DVD players, CD and some DAT recorders to multi-channel surround sound (Dolby Digital, DTS, etc) equipment. RCA is often replaced by BNC connections on certain high end equipment.
  (2) Toslink is a coaxial digital audio connection fiber optical version and is used in the same applications as the coaxial. Most of the newer devices has a connection to toslink cables. In applications where the source or receiver has only coaxial connections the signal can be converted to Toslink using a decoder.

  In my opinion if you want to use the SPDIF digital audio output, so you must use cable Audio optical Toslink/SPDIF.

• Qosmio F30-111 - graphics card problem

  Hello

  My laptop does not show any other resolution than the usual text resolutions (starting).
  The laptop is almost useless with this problem.

  The problem occurred when playing a computer game in the resolution of 1280 x 800 regular graph (for windows).
  The screen went black, but has no power lost. I had to restart from power button / stop.

  Windows XP (from toshiba) gives a blue screen after the splash screen during startup.
  Also, I have Linux and Xorg reports a fatal error when starting driver NVIDIA, so I cannot use the computer in mode terminal linux, no X mode. But I can still use Linux mode of expression and access to all files.

  When I start the screen also has a strange color mode. In text mode, many letters is brighter than others. This happens in installation mode and Terminal in Linux mode.

  Other strange things things I noticed recently, that is the FAN makes noise more now due to the temperature higher CPU (2 to 3 weeks).
  Sometimes reaching 100aº C (which has never happened before). In recent months, the laptop was still in the Office at home.

  I bought the computer round of June 2007, is still under warranty (2 years in the Portugal), and I registered it on the toshiba site.
  Currently, I live in Poland. Can I retrieve my warranty in Poland and try to solve the problem here? (I'm Portuguese).

  Hello

  Looks like the graphics card began to malfunction.
  Therefore, you must contact the ASP as soon as possible.

  I think that you can contact the ASP in Poland to help him, because all laptops are covered at least 1 year international limited warranty carry-in.
  As the name says it of a international warranty and if the warranty is valid the ASP in Poland should be able to help.

  Check this page for any FSA world wide
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  Good bye

• Message to Raid-1 is worse in Qosmio F30 - 111

  Hello

  Sorry for my English.

  I have a problem with my laptop when turn on show me a massage "Raid-1 is degrading" and can´t use the recovery CD why show me this massage again. I run windows xp mce.

  Help me please.

  thankss

  Hello

  I installed OS using DVD recovery successfully. It has been for a long time and if I remember well, you must change the RAID settings in the BIOS on page 3.

  I think it should be 1-RAID-0. Check it please this document http://support.toshiba-tro.de/kb0/TSB6901K60006R01.htm

  Good luck!

• Qosmio F20-111: need drivers Vista-&gt; Can I use drivers for F30?

  I couldn't find a driver for my laptop vista. Can I use F30 drivers for my laptop F20?

  Thank you

  Hello

  Of course, you can try to install the drivers of Qosmio F30 but the question is: drivers Vista F30 will work?
  I think you should be able to install Vista on your F20.
  But you will not be able to use the additional features of Toshiba Toshiba controls, keys FN, etc.

  PS: I found very beautiful thread in the Qosmio G20 section.
  Some of the guys discussed about Vista on the G20. Now for the G20 Vista drivers are not available, but FranciscoJr has handled this problem.

• Need a second drive hard "holder" for a Qosmio F30-141

  I bought the second hard drive (Toshiba 160 GB sata) for my Qosmio F30-141. There is no 'holder' (metal platform for mounting of hard disk) in the second slot. There is no "springs" protection too. How - he called and where I can buy things?

  Hello

  The hard drive carrier is available in your Toshiba dealer in your country

  Reference No.. P000457790 ASSEMBLY OF THE HARD DRIVE SUPPORT

  and you need 4 screws to fix the HARD disk and 1 screw to fix the door--:--.

  Reference No.. P000417800 TSCREW M3X4CR 4 live
  Reference No.. P000318000 M2.5X4BN 1 screw

  Note: You can Type the part number in Google and you will find many online dealers
  Kind regards

  Reaver

• Qosmio F30-112 USB drivers needed

  Please... I need driver USB for Qosmio F30-112

  coz USB does not work properly

  Hi mate,

  your description is really, really short. Could you please describe more detailed WHY it s NOT WORK and you have attached to your USB ports.

  I ask, because USB on XP/Vista does not all drivers. Moreover, what operating system is installed on your machine?

  Greetings

• Re: Graphics Qosmio F30-140 - need latest driver nVidia

  The Qosmio F30-140 comes with an integrated Nvidia GeForce Go 7600.

  I looked on the Nvidia site to find an update for the video driver, but they said that updates for laptop cards are given on their site of manufacturers.

  But I couldn't find an update as well on the toshiba site.

  Please notify. I need a video driver updated for the game named PURE because currently I can't see models of players in the game and PURE support said the problem is that a release date of the video driver. \

  Help, please.

  Hello

  On the Toshiba driver graphics drivers are always the latest drivers available for the unique laptop series.
  The point is that graphics drivers from Toshiba are not the same thing as original manufacturers GPU graphics drivers.

  Anyway, is there a way to install the driver nVidia GPU.
  You could install from Device Manager and that you use the Advanced installation.
  Then choose; + Don t find. I will choose the driver to install. +
  Then, you must point to the driver that you downloaded from the NVidia site.

  But note; No driver installation gone 3rd in ONLY at your own RISK!
  Using the nVidia drivers can overheat and damage the graphics chip.

• Qosmio F30 and Vista - mode ATK100 ACPI Driver need

  Hi people!

  I hope you can help me solve my problem. I ve installed Vista Home Premium on Qosmio F30 my friend (don t know for sure, but it's the model F30-100) and everything works great found nvidia drivers BT etc... but an error message keeps coming up when my screen shows: mode ACPI ATK100 driver...
  I tried to find a solution, but nothing seems to work...

  Help!

  I'm not quite sure what is the mode of ACPI ATK100 driver, need for, but I guess you can disable loading this driver in the msconfig or it could remove from the registry RUN m.
  EntVersion entVersion\Run

  This would prevent the driver from loading and the message would not jump upward.

  See you soon

• Need for new drivers Nvidia Geforce Go 7600 for Qosmio F30

  Hello world

  I need a new version of my video card drivers * Nvidia Geforce Go 7600 * of my Qosmio F30. In the Toshiba web page there is only the version 83.17, but is the only one I have and he's too old, and I need a version more reciently.

  The web page of nvidia can help me, because they do not have the drivers for my qosmio. I tried to use the drivers from laptopvideo2go.com, but it is too difficult to do something on this page with unofficial drivers.

  Can someone help me?
  There is an available new version of my drivers?

  Thank you.

  You could try nVidia drivers of another model of Toshiba, or read the instructions/guides on laptopvideo2go

• I need BIOS v1.30 for my Qosmio F30

  Im trying to upgrade my Windows XP to Windows Vista. The installation program tells me I must load QOSMIO F30 BIOS V1.30 continuous adjustment. I went to the Web from Toshiba site to load this unfortunately BIOS that I have not found it on the Web site. I'd appreciate any help or suggestions.

  Yahya Al Ethawi MD Hussain
  A neonatologist Doha Qatar

  Hello yahya

  You can find the BIOS and all drivers Vista for Qosmio F30 here: -.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=EU&LNG=5

  BIOS version is 3.90 now and it will work on Vista

  Also, you need to put the RAID on a USB Flash Memory driver and load the driver when you start to install vista, because vista will not recognize your HARD drive unless you do.

  I suggest Vista Ultimate or home edition Premium, Becuae the Media Center and the remote control.

  and if you face any problem after that then please let me know

  Reaver