need to disable my other network connection to connect

Similar Questions

• Disabled WRT54G, bad network connection

  I have WRT54G, v6, Firmware Version v1.00.7.

  Recently, I've disabled the security on the router to resolve the problem of Wi - Fi with Tablet.  Now, once I activated the security on the router as my mobile devices cannot connect.  Get response 'off network, bad connection '.  Very high intensity of the signal, link speed 54Mbps, WEP security.

  If I disable security, mobile devices will be connected successfully.

  You will appreciate the recommendations and/or advice.

  Try WPA

  Clear all previously used devices devices profiles and then try to connect again. The power cycle devices after erasing the previously used connection profiles, i.e. forget this network.

• Need password for wi - fi network connect iPod

  I'm trying to connect to internet from my ipod and he asks me the password of access to the network. where should I look on my computer to find out what my password is to use the wi - fi?

  Hi katelynjones,

  You can see the steps in the link below which covers a similar question on the computer Windows Vista (wedges of good steps for Windows XP) by Jeremy K.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/i-cannot-connect-my-iPod-touch-to-my-wireless/c16829fb-7da5-4cbb-9c49-87feed7e604b

• need to reconnect my wireless network connection

  My computer crashed and I had to do a system reinstall, now my wireless network has dissappeared but don't know how to recover it, can someone help me with this?

  I put in my network key and it seems to work ok now, thank you very much for you time.

• I need help in creating a connection to the LAN in my network connections.

  I recently performed a clean installation of XP Pro and I am unable to connect to the Internet. In my network connections, I have only the 1394 connection, but no connection to the local network.

  I've also included five devices problem identified by the Device Manager which are be annoying because no driver seems to be responsible.

  Problem of devices in Device Manager:
  
  1 Ethernet Controller PCI VEN_8086 & DEV_1050 & SUBSYS_815C104D & REV_024 & 2E98101C & 0 & 40F0
  The drivers for this device are not installed.
  
  2. multimedia Audio Controller r PCI VEN_8086 & DEV_24D5 & SUBSYS_815B104D & REV_023 & 267A616A & 0 & FD
  The drivers for this device are not installed.
  
  3. network controller PCI\VEN_1814 & DEV_0201 & SUBSYS_00321737 & REV_014 & 2E98101C & 0 & 50F0
  The drivers for this device are not installed.
  
  4. Modem PCI PCI VEN_8086 & DEV_24D6 & SUBSYS_8128104D & REV_023 & 267A616A & 0 & FE
  The drivers for this device are not installed.

  5 series  
  ROOT\LEGACY_SERIAL\0000
  This device is disabled.

  I have a Sony VAIO Modem Lite-on CNR model - 002 # / A18 and tries to pick up a signal from my router AirLink Wireless Lan and Port wide band a few feet skinny feet away.

  I've already lost most of the day diddling with half a dozen pilot search utilities that are imposed to the be me these sites with databases of driver. I managed to make no progress whatsoever other than to download several useless versions of .net software framework (required by these programs of research of sadistic driver update!

  My hardware should not be a problem because the system was functional in terms of access to the Internet only a few days ago.

  Can anyone offer suggestions that could help me solve this puzzle?

  RangerDude

  There is no LAN or wireless connections because the drivers are not installed for Ethernet controller and network controller.

  If your computer came with a disk of driver installation, use it to install the drivers.  If it does not, use a different computer to access the web site of your computer manufacturer and download Windows XP drivers for your computer model.   Then transfer them to your computer and install them.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Wireless network is disabled by the hp connection manager after hibernation, sleep etc.

  Wireless network is disabled by the hp connection manager after hibernation, sleep and sometimes when I use the computer. I can't see preferences in HP Connection Manager to fix this, or Windows power management.

  What is the solution to keep the network wireless activated ALL THE TIME?

  Edition of the HP Connection Manager does not work, so I can't activate wireless again!

  My computer:
  HP ProBook 4530 s (new)

  Windows 7 Pro (included with the computer)

  No other power or utilities wireless isn't installed, just the HP utilities installed at the factory.

  In the hope of a quick solution.

  Thanks in advance.

  -Mikael Noerrelund, Denmark

  There is a setting in Connection Manager > Preferences > power to the device , which CAN be assigned to turn off the wireless / Bluetooth when you have left the connection manager.  You must Select / SET parameter.  You can see, just in case...  I never heard talk of the Connection Manager turn off wireless, unless it was to make it to the exit.

  You can do the following in the Device Manager to leave the power to the wireless and Bluetooth devices:

  Control Panel > display icon > Device Manager > network adapters >

  Right click on the WiFi link (Intel) (wording may vary) >

  in Properties > Powermanagement >

  Clear the check BOX "Allow the computer to turn off this device to save power".

  Ok

   

  Do the same for Bluetooth...
  

   

  I hope this helps...
  

• my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

  my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This means that the computer cannot connect to the router.

  Try this process.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 7 is constantly looking for other networks and drop connection

  Original title: the upgrade of Windows 7 for XP

  I first installed this OS a year ago to this date. Loved, absolutley was entrenched with how easy it was and just how 'worked '. I am a software developer myself and am happy to report all my IDEs, the server settings, etc. all worked like a charm. I had a little problem with VPN but it works with the Vista one (with some work) so I can't complain.

  My problem and this is why I uninstalled windows 7 and will be EVER is back at it before it is solved the same problem 10 years ago. He keeps every 60 seconds looking for other networks or drop the connection no reason apparent. With windows XP, I could disable the Zero wireless and everything would be fine. However, with windows 7 if I turn the WLAN service nothing on this earth that will allow me to connect to it without a third-party application.

  In the end I used a 3rd party app made by the chipset driver and it still failed (but had limited success).

  It is a known problem with windows operating systems. This just "does not work" at all. It's a pain in the thigh and is the reason why people are saying that the wireless is terrible for gaming. I know that isn't true since I have never had a fall with windows XP or my dual boot SuSe OS. 3rd parties even tried to fix this for microsoft in creating the WLAN and Vista Antilag optimizer which all fail for windows 7.

  And just to show you how apparent is this bug...

  customer complaints

  It seems to somehow keep seeps through the cracks with every version of windows. Simply because I know that this wont never be resolved after 10 years ive thrown my copy in the trash and advising all my loved ones to stay on XP. I used to think... "they'll fix" but quite honestly, I think that microsoft is tone deaf to it.

  With regard to upgrading my firmware on my router is concerned, I have programmed my own. I used 3 different routers. My drivers are all up to this date for my card wireless on this box. I used XP drivers with slightly better results but remains unacceptable. I was running with a hackintosh and vmware fusion rather than deal with these headaches after work.

  Maybe im being a bit too critical, but make you pay back for a BONE which does not have everything because of XP.

  After buying a WNDR3700 N600 top double band brand new brand of the router Netgear power line she didn't always.

  2 solid ways fixed my issue.

  the network of windows 7 reason fails

  One, I had to turn off the service navigation computer in administrative services as noted above.

  Two, I had to turn off the power save feature on the usb network adapters.

  Not many people understand how to solve this problem, but I would ditch the derivative of the net bios completely.

• no internet until I disable and then enable network connection

  From time to time when I start the pc I have no access to the internet, I don't have on any other pc will work fine. I have to disable and then enable the network connection, but sometimes this does not work either, so I check and uncheck Protocol internet version 6 then it works. How can I solve this?
  I am running windows 7 ultimate

  Hello

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

  original title: connection to a network PC 2

  I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

  1 connected directly to the AAQMS system for the Air monitoring

  2. connect directly to the LAN of the company

  There is a solution that I can't connect two without any AAQMS system shutdown.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Event BROWSER, then NIC disconnects - then I have to disable/enable the NETWORK card to be able to connect again

  My Event Viewer, I get:

  The browser has forced an election on network \Device\NetBT_Tcpip_{FD1381E1-CBD5-4862-89B3-091DFF344FD4} because a master browser was stopped.

  -

  -

   <>BROWSER"/ >"

   8033

   4

   0

   0 x 80000000000000

   <>2010-08 - 05T 22: 01:14.000Z"/ >"

   562165

   System

   TimeX1

   

   

  -

   \Device\NetBT_Tcpip_{FD1381E1-CBD5-4862-89B3-091DFF344FD4}

   

   

  After my NIC disconnects, and I have to turn off and then turn on the device again.  It seems completely random and will interrupt downloads and everything.

  I need help to find the cause.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Why I still see other appearing in my list of wireless network connection when network discovery is turned off?

  Why other users who are are my nearby?

  Can I be sure that they cannot see me when discovery of the network on my computer is off?

  Should I worry about these other users?

  I am the only computer in my home group, and my wife uses a Tablet using my wireless network key. but no one else has access to my home group.

  Discovery Network turns off the discovery of other devices that are already inside your trusted network (like your TV system game, tablets, phones and other computers).

  It does not affect the list of wireless network connection, which is actually just a list of wifi nearby broadcasting system has found.  You can not turn off without turning off your wifi.  But this isn't a security problem.

• I can connect to my home network, but all the other networks do not work...

  I can connect to my home network, but all the other networks do not work... Error window says:

  Windows could not connect to the (X)? network name?

  [Link] Solve problems

  [Link] Learn more about Internet connection problems

  I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...

  Windows 7

  Hello

   
  1. What network are you trying to connect to?
  2. You are not able to connect to the Internet?
  3. Are you able to connect to the other network with wired network?
   
  Try the methods provided and check.
   
  Method 1:
  Check out the link and follow the steps.
  What is network discovery?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery
   
  Method 2:
  Check out the link and run the troubleshooter.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3:
  Reset the TCP/IP and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
   
  Method 4:
  Check out the links and check out them.
  http://Windows.Microsoft.com/is-is/Windows7/cant-connect-to-a-network

  http://Windows.Microsoft.com/is-is/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Store Windows unable to download 'we cannot connect to the service you need right now. " Check your network connection or try this later.

  Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.

  Original title: Windows Store-downloads

  Try the troubleshooting steps below after completing the methods provided by Vinodh.V

  Method 1: Make sure that the Date and the time is accurate

  Open quick run (Windows key + R)
  Type timedate.cpl , and then click OK
  Click the Internet time tab

  Click change settings

  Click update now , and then click OK once the time is Sync

  Method 2: The problem may be caused by the Proxy settings

  If you use a Proxy

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Of that type the below command and press enter

  netsh winhttp import proxy source = ie

  If this does not work, you can reset the proxy settings using below command

  netsh winhttp reset proxy

  3:Fix Windows Update method

  Running Windows Update troubleshooting tool can solve some problems.

  Open Control Panel

  Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view

  Select the fixed problems with Windows update.

  Select Next and then click Finish when the process is complete

  Method 4: Search for the latest Windows updates

  Open quick run (Windows key + R)
  Type wuapp , and then click OK
  Click check updates
  Download and install all pending updates.
  Restart the computer

  Method 4: perform the Scan SFC

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Type in the command, and then press on enter

  SFC/scannow

  Method 5: Upgrade to the Local account and switch it to the Microsoft account

  To switch to local accounts

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click on your account
  Click Disconnect
  Enter the current user password and click Next
  Click sign out and finishing
  Log on to the user account

  To switch to the Microsoft account

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click to connect to a Microsoft account
  Enter the current password
  Enter the password of the Microsoft account and click Next
  Click switch