Need to do a clean install of Vista - have several issues

Similar Questions

• HP a367c XP family, upgrade to clean install of Vista. Firmware upgrade must be done again

  I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption

  1. can I need to reinstall the firmware for a367c office updates, or others like bios, other ect.

  2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours.

  Thank you

  plantingrichard

  plantingrichard wrote: I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption 1. I need to reinstall updates firmware for a367c office, or others such as bios, other ect. 2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours. Thank you plantingrichard

  Hello plantingrichard, first of all, it would be useless to worry about Firmware updates, because data for these Firmware updates are stored in the devices that the firmware has been installed for.

  You may be able to restore the system with the feature of restoration of HP Recovery from the hard drive to the system startup and the F - 11 key when the HP Logo screen. Just as it was when shipped, it would put all HP applications on the system.

  You can then use the Vista DVD disk and perform an inplace of Windows Vista SP1 upgrade.

  If you don't want all HP applications, you can perform a new installation of Vista.

  You may be able to locate the Vista SP2, but I suggest the Windows Update site and download and install all updates including Vista SP2.

  If you have a DVD of Vista SP2, you can use it to upgrade or new installation. The Vista SP2 would have included in the DVD of Vista SP2 SP1 updates.

  As you suggest, it will take some time to complete, but you'd probably have a more stable system using this approach.

• Clean install of Vista professional stops on Satellite L300D

  I have a new L300D that came with Vista Home brand, and I want to install Vista Business. I tried an upgrade, but which is not allowed! So I tried to do a clean install of Vista Business or Vista Ultimate (I need facilities to the membership of domain on this laptop) Installation is fine until the last item... I think that its configuration... I get a few sessions of modeled appear, indicating some kind of progress, and then it stops. The gauge makes just about 3/4 way to complete installation.

  Trying to install XP gives a BSOD and I guess it's todo to not have the integrated into the XP SP1 CD SATA driver... so I now have a laptop with a nicely partitioned and formatted hard drive, but not bone!

  Any help would be welcome...

  Using a floppy disk:

  Installing a version commercial (street copy) of Windows XP on a Toshiba Vista laptop.

  Step 1: Prepare the BIOS
  -Go to section Support/Drivers on the Toshiba site and look for your model of Toshiba
  -If your phone has a separate version of BIOS for XP and Vista, download the BIOS XP and run it in Windows.
  -If you cannot start Windows, you can update the BIOS after installing XP.

  Step 2: Enable SATA Compatibility Mode in the BIOS
  -If installing XP cannot detect SATA drive, enable SATA Compatibility Mode in BIOS if this option is available and install XP.

  Step 3: Install XP using a floppy with the SATA drivers
  -If SATA compatibility mode is not available, you must use the SATA drivers diskette during installation of XP. Follow these steps:

  (1) Download driver Windows XP SATA F6 on the site of Toshiba Support/downloads.
  If a single SATA/AHCI F6 driver is unavailable, download and extract the Intel Matrix Storage Manager driver for XP in a temporary folder.
  The Intel Matrix Storage Manager driver package must contain some files under the folder "F6flpy". For example: C:\temp\Intel Matrix Storage Manager\F6flpy\ICH8M_32bit
  Choose the right folder. For example: ICH8M_32bit for a Chipset of Intel ICH8 during installation of Windows XP 32-bit.

  (2) copy these files (iastor.inf, etc.) on a blank diskette. The files must reside in the root directory of the floppy disk.
  For example: A:\iastor.inf, A:\iaahci.inf, etc...

  (3) connect a Toshiba USB floppy drive to the Toshiba laptop. (some non - Toshiba USB Floppy Drives may not work correctly during the installation of XP)

  (4) (4) demarrer start from the Windows XP CD, start the installation and make sure that your floppy with the drivers is inserted into the floppy USB drive.

  (5) for the XP installation invites you to press F6 to install a storage driver, immediately press F6.

  (6) for installing XP you invites to select a SATA driver, select the appropriate driver and continue.
  For example: ICH7M Intel(r) 82801GBM SATA AHCI Controller, Intel(r) ICH8M 82801HEM/HBM SATA AHCI Controller

  (7) keep the attached floppy drive and floppy disk inserted XP has not completed its installation.
  Do not partition or format the hard drive during the installation of XP. The diskette SATA drivers are copied and stored on the hard drive during the installation of XP.

  --------------------------------------------------------------------------------
  Using a XP CD updated the:

  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Did a clean install of Vista - cannot depend on an advocate, I am missing the updates?

  I did a clean install of Vista and thought that I did it correctly... but

  1. I can not turn on Windows Defender. It seems to hang and then I get the 0x800705b4 error message and that the delay expired.

  2. While diagnosing the original problem that finally forced me to do a clean install, PA bear MS MVP asked if I had a few specific updates. For example,.

  (a) KB2719177 [or KB2699988], KB2705219, KB2712808 & KB2731847;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 or maybe KB2721691;

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649, KB2676,562, KB2688338, KB2690533 & KB2695962;

  (e) KB2644615, KB2393802 and especially KB971029.

  Those listed above, I have no

  (a) - KB2719177 [or KB2699988]

  (b) - KB2721691

  (d) -962 KB2695

  If I need to have these, how can I get them? I clicked check for updates and installed the updates until this process went more updated.

  Thanks in advance,

  -YT2252

  You are welcome.

  It was a fluke that I know where you are up with that in the previous question, I answered.

  MSE is the reason; It disables the Defender on the goal.

  Here are all the facts about it.

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  I suggested msconfig and Autoruns, as defender is how Microsoft points you, change Vista startup programs.

  One day, you can stop a program starting at start-up That's why I've included these two links for you as no longer, you can use Defender to do.

  What about updates that you think are missing, it would depend on what you have reinstalled as to what you need. You have not found a message that it is an installation failed for them; you jump a list-type PA Bear for you.

  I would say that those particular updates you think you are missing, you may repost in the Windows Update Forum and go to the Attn: PA bear.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Re-install (clean install) Windows Vista Home Premium with no installation disc

  I have a laptop that is running Windows Vista. I would like to wipe the drive and reinstall Vista. The computer came preloaded with Vista and did not include the operating system installation diskettes. How would I be able to get the Vista installation diskettes? My computer is an Acer Aspire 5100. I am running Windows Vista Home Premium 32-bit (SP2).

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a fee if they are still available.

  http://us-store.Acer.com/RCD/

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  With an Acer, it's "left Alt + F10 at startup".

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  See programs > Acer > then their eRecovery software stars for them.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Clean install of vista without disk?

  I bought a laptop with the Vista.I op system will have problems and need to do a clean install. My problem is that my computer did not come with a disc then, how should I proceed.

  Steve

  Check the owner's manual or the support page online for your make and model and search for instructions on how to use the "Recovery" partition

  Another option is to contact support and ask them to send the recovery media. Note that is maybe not a free service.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• XPS 420 - HARD drive failed, performing a clean install of Vista on the new HARD drive.

  Hey everybody,

  My on my XPS 420 HARD drive failed and I'm trying to reinstall Vista using the disc that came with my machine back when I bought it.

  I bought a new WD10EZEXAZ (1 TB Serial ATA HDD), he rose in the same dwelling as my old HDD (ST3750630AS * Barracuda 7200.11*). I start the PC and goto Setup, it recognizes the HARD drive in the blue menu.

  Then I boot with the CD of Vista that came with my system. I proceed as indicated through the following url:

  Clean install of Vista

  After its copied files, expanded the files, installed features, updates installed... it goes to "Complete Installation" and throws an error message: "Windows Setup could not configure Windows to run on a hardware on this computer."

  I tried a few things I've seen posted on the internet, including trying to run msoobe.exe via command line. When I did, it allows me to Setup user... but finally I get sent to this message of error or another telling me I have to reinstall Windows.

  I read else where some hard disks may not compatible with the Dell disk provides with my OEM machine. If this is the case, can someone advise? I really didn't want to spend $100 one another on a Windows 7 disc, but I feel like this may be my only option... but even in this case, I'm not so sure this will work or the other.

  Any help would be greatly appreciated,

  Tony

  UPDATE *.
  Did some more research, I discovered my new drive HARD is an advanced HDD format... not sure if it has nothing to do with my problems (by www.wdc.com/advformat Vista should not need to perform the work before the OS being installed), but thought I would mention it.

  Thanks again for any help.

  ****************

  Seems that I found the solution to my problem.

  Problem has been fixed by going into the BIOS and change the Mode of Port SATA to IDE/native/AHCI native. After that, the installation worked without any problems. Seems that Windows Setup did not like the port mode is set to RAID.

  Just thought I would post back everybody incase has had the same problem.

• I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

  I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?
  
  Thank you

  Hello

  You are welcome

  If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

  Kind regards

  DP - K

• Problems after doing a clean install of Vista Home Premium and service pack 2

  I see that others have the same problem as me, but there is no way to comment (that I can see) on the thread I've read.  After a lot of problems, I did a clean install of VISTA Home Premium (came with my Dell PC) and when I installed service pk2, all of the same problems that led me to do a clean install appeared.  I can't the computer to recognize and install the keyboard and the mouse of the blue tooth. (Don't tell me to contact the manufacturer, because they came w / the computer and say "Dell" on them!)  He told me that the enumerator does not work.  Then I launched Quicken, and when I tried to save a registry check for print, he gave me the msg "Quicken launcher has stopped working".  He was a key reason I did a clean install.  The only improvement is that I can at least open Quicken, which he would not let me do before.  How to uninstall service pack 2?

  http://support.Microsoft.com/kb/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• After clean install updates vista cause blue screen of death__

  After that a clean install of vista cds coming from the laptop of dell computer purchase fine until I install 80 updates of windows. I get blue screen when restarting updates but passes so fast, I can't pause to read. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to do a clean install of Windows 7 after upgrading with an Express upgrade

  I have a Dell, I used the improved anytime W7 home premum Pro on a 1 1/2 years. I need to do a clean install. How can I keep my o/s W7 pro? I have access to a W7 pro reinstall disk.

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• I had to do a clean install, now I have problems to register upgrade

  Due to a problem of Windows Explorer that kept crashing I had to do a clean install of my Vista Ulatimate. Now it doesn't let me save the program. I've tried doing a reinstall and that didn't stop my crashing Explorer. Forum was probably fifty solutions to this problem, which has not worked for me and Microsoft told me they didn't help me solve with out charge me, so now they're trying to me live in the purchase of a new program or the upgrade and that sucks.

  You MUST start the process after WIndows starts - do not have the DVD in the status bar when you start, but insert once started.

  To be honest, you should have settled this first thing - now, all you can do is try to uninstall SP2 and hope it works, but be prepared for a double-full installation if it does not work properly.

  http://www.winsupersite.com/article/product-review/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista

• Sony Vaio with 32 bit Vista pre-installed. Want to remove and do a clean install of Vista 64-bit.

  I want to put Vista Ultimate 64-bit OEM on my Sony Vaio VGN-FW21E which has Vista Home Premium 32 bit installed. I intend to do a clean install.

  My question is I am able to restore the settings of Vista 32 bit and the factory once I installed Vista 64, either through the Sony Vaio Recovery Center or using recovery partition that is not on my machine?

  The laptop was purchased second hand off ebay and didn't come with any disks. The product key sticker is present on the underside of the laptop.

  I want to put Vista Ultimate 64-bit OEM on my Sony Vaio VGN-FW21E which has Vista Home Premium 32 bit installed. I intend to do a clean install.

  My question is I am able to restore the settings of Vista 32 bit and the factory once I installed Vista 64, either through the Sony Vaio Recovery Center or using recovery partition that is not on my machine?

  The laptop was purchased second hand off ebay and didn't come with any disks. The product key sticker is present on the underside of the laptop.

  Hé mw8t

  Yes, you can reinstall clean 32 bit vista

  you need to get the sony vista recovery disc

  or use your recovery partition

  It depends on how you install 64-bit whether if the recovery partition is left untouched or not

  You can also reinstall the 32-bit version of this way

  borrow a microsoft dvd vista

  Make sure that you borrow correct 32-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  ask also sony how to make this recovery partition recovery disks now before you go ahead and install the 64-bit vista

  then you have reinstall disks for 32-bit vista

  Walter, the time zone traveller

• A clean install of vista home premium and it is given me an error message "cannot start 0 xC0000001.

  I do a new install of Vista Edition home premium and it gave me an error message "windows could not start, status: 0 xC0000001 ', even not all components of the computer are brand new and aparently work well, can someone point me in the right direction?

  Thank you

  Justin

  I try already and my system is configured to boot from the cd first dvd room.
  After that start the DVD vista sytem shows the error 'windows couldn't start error Oxc0000001.

  It is not a DVD - RW SATA is?

  If you need Intel drivers Matrix to exploit your readers to drive HARD and DVD - RW, DVD - RW SATA won't work properly (owners of Intel motherboard you lucky guys don't have this problem). Need to install drivers of matrix for the DVD - RW being recognized (the egg before the chicken scenerio), hence the need for an IDE DVD - RW.

  Second, make sure that the BIOS can identify your DVD player correctly. If shut down you the computer and it stops, stops and restarts when you restart the computer again, the BIOS has not yet saved the change of equipment.