Need to edit boot.ini timeout using the Recovery Console

After a problem with my diet, I can't start... go to the flashing on the black screen cursor.  Can get F2 and F12, have run diagnostics without error.  Impossible to get F8 to answer.  Running Fixboot and FixMBR and run install completed repair and recovery console.  CHKDSK displays all good.  Still no start.  Have you noticed this bootloader timeout = 1. should be 10 or 30?  How to change or change that?

Any other ideas?  Material is good... checked by replacing the hard drive with XP loaded.  A Win XP Pro FP2.

Boot.ini example: http://support.microsoft.com/kb/289022
Don't know what you are looking for here.

With regard to the Recovery Console - http://support.microsoft.com/kb/314058
Description of the Windows XP Recovery Console for advanced users

Hope this gives at least you start. TaurArian [MVP] 2005-2010 - Update Services

Tags: Windows

Similar Questions

  • Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

    I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
    The license specifically Vista also XP licenses.
    Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

    I would also like a third boot, Red Hat Linux 9.
    Any comments?

    Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
    I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

    So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

    If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

    Best regards

  • Cannot start the Recovery Console Windows from the installation CD

    On my MacBook I ve running in VMware Fusion 3.0.1 a Virtual Machine with Win XP Pro.

    When I reboot Win XP Pro and start again from the Windows XP Pro installation CD, I can see the "Welcome" with the menu screen

    -To install Win XP now, press ENTER

    -To repair an installation of Windows XP using the Recovery Console, press r.

    -To quit Setup without installing Windows XP, press F3.

    When I click ENTER or R, I see the message

    -The installation program did not find any hard drives installed in your computer. Setup cannot continue. To quit Setup, press F3.

    Today the question? In the 40 GB of the virtual machine, I have two free partitions of 10 GB and 20 GB Win XP Pro execution. Why see Setup cannot process this partition?

    I ve also installed a second Virtual Machine, but the installation of VMware Fusion not show the "Welcome" screen, but it installs both Win XP Pro.

    The installation of the recovery in the virtual race Machine Win XP Pro Console is successful, but when I start the recovery in Start Menu Console, just the screen blue 0x7B (inaccessible boot device).

    What must I do, to start the Recovery Console in VMware Fusion? Or another question: when merging does support the Windows Recovery Console?

    Wow, nothing indicates that you use a German version of Fusion that your English is excellent.  Anyway as VMware headquarters is in the United States, like me, I always provide information in English and information-specific guidelines in the VMware Fusion help files come from the English version as well as any Documentation from VMware that I reference.  I say this next part as a general and not directed comment towards you, as you have noted your using the German version... Any person requesting help must always at least include technical information referencing manufacture, make, model, version, and language other then English, material goods and software involved in issues.  We'll find a good reference for the type of information that must always be included in HOWTO: ask (and answer) Questions.

    As a much get into the BIOS if you use the Fusion 3, you don't need to enter the BIOS to change the boot device as this can be done in the settings now however to enter the BIOS for other things that need/want of press you F2 directly after starting the Virtual Machine and after having clicked on the screen but the av VM boot so fast that it's easily missed.  You can add the following settings to the file of configuration .vmx of the Virtual Machine to slow down the startup so that force once in the BIOS.

    bios.bootDelay = "3000"
    bios.forceSetupOnce = "TRUE"
    

    The bios.bootDelay is in milliseconds and the bios.forceSetupOnce Boolean value is then set to FALSE, automatically.  Each of these parameters are independent of each other.

    You can find the following useful notes for this and or other uses...

    ====================

    Notes: keyboard

    Different setting function, you may need to adjust various preferences keyboard to work with the function keys and or use the Fn key.

    OS X > you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

    Merger 1 > VMware Fusion (menu) > Preferences... > keyboard and mouse > activate Mac OS shortcuts keyboard

    Fusion of the 2 and 3 > VMware Fusion (menu) > Preferences... > keyboard & mouse > Mac OS shortcuts > activate Mac OS keyboard shortcuts

    ====================

    Notes: Starting the virtual machine from CD/DVD or ISO Image

    If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

    Engage the Boot Menu and select the CD-ROM drive...

    The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

    "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

    On the status bar, it features...

    'To direct entry to this virtual machine, click inside the window.'

    BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

    OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

    Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

    To give more time to indulge, the Start Menu Add the following...

    bios.bootDelay = "3000".

    For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

    bios.forceSetupOnce = 'TRUE '.

    ====================

    Notes: By modifying the .vmx file

    For Fusion 2.x and 3.x ctrl-click the target entry of Virtual Machine on the windows of the library of the Virtual Machine and choose Show in Finder and then Ctrl-click on the packaging of the Virtual Machine and select to display the contents of the package.

    By default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

    ~ Is your Home Directory.

    The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

    Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

    To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

    To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

    Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

    ====================

    Notes: Creating an ISO Image of the CD/DVD drive

    When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

    To create an ISO Image using disk utility...

    1 insert the CD or DVD disc into the optical drive of your computer.

    2. open disk utility (/ Applications/Utilities/Disk utility).

    3. Select the CD or DVD drive in the list of disks and volumes.

    4. Choose file > new > "Disk Image from (name of the disc)."

    5. type a name for the disk image.

    6. choose "DVD/CD master" from the Image Format pop-up menu.

    7 choose "none" from the encryption pop-up menu.

    8. click on save.

  • Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

    I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

    I have the SSD and the caddy

    I need to:

    delete the original OEM HD

    Install the SSD

    install OEM HARD drive in secondary Bay

    Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

    or I have to

    delete this HD

    Install the SSD

    go into the BIOS, and then assign him drive in AHCI (etc.)

    Install Win 7

    install OEM HARD drive in secondary Bay

    etc.

    I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

    is this true?

    Pavilion dv7 - 6143cl

    I7

    8Gb

    Win7 (64)

    Thank you very much

    Hello:

    Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

    If so, you have an AHCI BIOS default.

    If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

    I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

    So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

    To install W7 on your SSD, check your own install of W7 disc.  Here's how:

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    Can't answer your question on the dual boot as I never did before.

    Paul

  • Re: Equium P300-P6T - double boot, need to reinstall but can't access the recovery

    Hello

    Have a friend s EQUIUM P300-P6T wishing me fix but recovery issues.

    It currently has windows 7 installed on separate partitions WXP can choose which operating system to start when loading. The factory for the laptop is Vista but it has replaced the one with 7.
    However, some of the Vista Boot files are damaged and cannot be mounted by Windows Recovery then resembles a new Vista installation is necessary.

    This should not seem like a problem but:

    (a) I tried holding 0 down as I turn to access the recovery partition (which still exists I see it within the management of the computer if I load xp) but it doesn't do anything, so I can't recover from the recovery partition.
    (b) I tried to reinstall Vista on this partition by using a disk of vista OEM however, when it happens at the stage of "complete installation" the progress bar stays in the same place forever about 3/4 of the way through as if it crashed.
    (c) I managed to get an installation of windows 7 on it, but when I charged it, it does not recognize the keyboard or a touchpad (even if not a problem with the drivers for each), and yet the cursor can be moved with a USB mouse is connected. In addition, the boot partition has now given a choice of "xp", vista, the older installations of windows

    I now put the computer to the original state, it was at the moment. However, the road I want to go down is to use the recovery partition to restore the factory settings on this particular partition and Vista.

    Does anyone have ideas how I can do this, or what is my best solution? As I said, now pressed 0 while starting has no effect yet the recovery partition is still existing on the hard drive.
    Unfortunately there is no recovery media that I have access to.

    Thank you

    Hello

    The whole story is very interesting and I wish I could help somehow. Your ad is quite long with very useful information, but, if I understand you correctly, you want to just install Vista original recovery image. Can you confirm this?
    If you have any other questions please ask one by one, and then we can answer one by one.

    Anyway, if your answer is YES here is my explanation:
    Saved on the HARD drive recovery image can be used with the factory only settings. With other words: when the original recovery image is installed, you will have full access to this recovery image. In the case where some other OS is installed (Win7 or WXP) this original condition will be overwritten and you will lose this recovery option (HARD drive recovery facility). Only way it have factory settings again is to use the recovery DVD disc. If your friend didn't create this disc (without taking into account the recommendation of Toshiba s) that you have big problem now.

    Please tell us once more what are your options now. What do you do now?

  • Need instructions on how to use the recovery Partition to restore my OS to its original state.

    I need to use the recovery partition to restore my OS to its original state.  I'm getting crashes (invaded by "dumprep.exe" CPU cycles) and an occasional BSOD.

    What brand is your computer?  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.  Looking for a message about the recovery options on the first screen that appears.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • I need help to retrieve my hard drive using the recovery of Neosmart disk (it takes days)

    To get a better perspective, I'll tell you the history of what has gone wrong.

    What happened is that the computer has a virus and it changed some coding on the computer. When this happened to that my computer wouldn't let me enter my account and the only account that I could go on was the administrator account. I tried on a few websites and the other microsoft Web sites told me to do something with the command userinit or something like that, which led to the black screen of death that I managed to fix it on my own.

    Another website told me to use the recovery disk but like a lot of people that I don't have a recovery disk, I only had a reinstallation disk that said I could fix the computer, but it would delete all hard disk that I didn't, I need the intact files because they are important to my family.

    Then I discovered on the recovery disk that you can buy from Neosmart.com and this disc is made like the original Vista recovery disk. Anyway I bought it and I clicked on "Automatic repair" and it comes up with 2 dives eligible for recovery (it says at the top) a player is 10 GB and the other is 288 GB (it says active is the 288 GB we) I clicked on repair automated on one of them, but I don't remember. Apparently fixed it (coding I guess) and I restarted but no consideration was there. He says "Please wait" for a long time, then it comes up with a single account that says "User" I click it and it says user name and password you will need to connect to a computer at school or something. I put my username and password anyway and it does not of course and it comes up with "the specified domain does not exist or could not be contacted.

    So, I went back on the recovery disk and I so I click on system restore to get my stuff back and I can put it on a previous date until the virus has arrived and I click on it, then it is said that his recovery, files, but just like that, I let him recover and he was recovering for 3 days before I came on this site and tried something but it did not work. Like I said before it is 288 GB so I guessed it would take a long time to recover only the amount of data, but it seems just silly.

    Could someone please help me with this with words that I can identify the disk recovery Neosmart.com please

    Important additional information

    I said before that I don't remember what I have fixed drive, the thing is that there might be I have set the wrong drive, but to be honest at this point, I feel like if I do a movement without knowing what it will do, im going to lose what's on that hard drive

    Important files are not for work, they are files containing family photos of many years we couldn't print on paper of good quality printing. There is no other copy of these pictures and I really want to keep them, even with my parents.

    The recovery of Neosmart disk contains the following options

    • Auto repair
    • Score editor
    • Browse/Backup of files
    • Internet browser
    • Launch the command line

    Within the Automated repair is where you can get the system restore. The others you can kind of guess, if you want to know so just ask.

    Help, please

    Thank you

    To recover the photos, you can remove the drive and it slave on another computer (you can get very cheap external envelopes) and remove your data (you have just learned an important lesson in why you need to have backups).

    Once you have saved your data, your best bet would probably be to reinstall. A good Web site for the removal of malicious software is that one.
    http://www.selectrealsecurity.com/malware-removal-Guide/

    Good luck!

  • I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

    I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

    original title: windows 7 gamer edition

    Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

    Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

    You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

    Resources:
    The Dangers of the purchase or use of software pirates - Notebooks.com

  • Satellite A300 - how to use the recovery with external DVD drive disc?

    Hello

    I bought a toshiba Satellite A300 - 15 d

    FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

    What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

    Thanks in advance

    Hey Buddy,

    Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
    You can get a new drive to an authorized service provider.

    But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

  • I want to use the recovery to any format CD

    I am currently using Windows Vista and I want to use the recovery to any format CD.
    I don't want anything that has been preinstalled to be more on my HARD drive.
    Should what options I use when you use the CD and it will reinstall Windows?

    If your recovery CD contains the Vista operating system then the installation procedure is very easy.
    You need to boot from the Toshiba Recovery CD and follow the instructions on the screen. Installation would format the drive HARD integer (clear partitions too) and would install Vista, driver, tools, tools and software on the laptop.

    Simply said, you will get factory settings books ;)

  • How to use the recovery CD?

    Hello

    Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

    Can anyone help please?
    St. Clare

    Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

    Richard S.

  • Application error 29005 - impossible to reinstall A100 using the recovery CD

    Hi, I need help with the toshiba restore tool...

    I got the blue screen saying the boot not mounted at the beginning and then volume I decide to repair or reinstall the operating system using the recovery CD.
    However, he ceased to work when he came to this screen:

    Toshiba 7.5.1 restore tool

    Progress indicator

    (has no progress in any)

    Statistics
    Completion percentage 0
    Speed (MB/min) 3
    Copied 4 MB
    Remaining Mo 1982
    Time 01:10
    Remaining time

    Details
    Type of local connection
    Partition Type: 7 [NTFS], 38154 MB of original, 2585 MB used, Diskload of Local Q:\BASE\PREINST.6H0 file),.
    38154 MB
    Target partition Type: 7 [NTFS], 38146 MB of drive space [1], 38154 MB
    Current file $MFT 0

    Loading table NTFS MFT

    and then suddenly, it said the Application 29005 error write sector failure: result = 1, disc = 128, 6301439 in 6301503 areas

    Abort 29005

    I don't know what to do to fix this... Please help...

    Hello

    Do you have created all the partitions on the HARD drive?
    Obviously, the HARD drive or partitions on the HARD disk is corrupted.
    In my opinion, that you should first format the whole HARD drive and also delete entire partitions.
    Insert the recovery CD, and then try to install the image of Toshiba.

    Oh, I forgot something; Check if the HARD drive is connected properly

  • How to recover files before using the recovery disk?

    Hello

    I have a Toshiba Equium and when I turn it on it loads the screen where you log does not appear, it has a black screen with a mouse, and I need to use the recovery disk to get back to normal, but I don't want to format the hard drive that I have a lot of files so it is anyway to recover the files?

    Hello

    In my opinion the easiest way is you remove the laptop HARD drive and put it in a box external HARD disk. Then, you can connect this external HARD disk to a different computer now and have access to the files on your HARD drive and you can perform a backup.

    An alternative you can boot from a Linux Live CD and back up your files on a different USB devices.

  • Satellite L500 - 19 X - cannot use the recovery disk

    Well I had this phone two days ago and he used once after installing fire fox and my mobile to wide band of the driver and going to start and find it of going to happen.

    I tried SafeMode (three) and repair and all I got was a screen black with the cursor upward where it should have been a language screen (I used the recovery disc supplied with the notebook) so anyway, after finding out that I wasn't going to be able to fix it, I tried to install , but of course, this does not work, or so I put my XP 64 bit OS on and has perfectly worked, then I updated (using my own upgrade windows 7) and that works fine no problem, so I tried again with the original windows 7 comes pre-installed on the hard drive on the laptop and everything went find until she starts the installation of the driver or updates (I not 100% sure on this but it or after the installation of face recognition.

    Then it stops it of self down and boots back up to automatically restart and asking me if I want to repair due to a bad start, so I did the repair boots back to the top and still says I need to fix and can't find anything wrong and carries on in this circle.

    Now, I was told it could be the registry or there is a problem of graphics, I get pretty tired of having to install/reinstall/format this laptop.

    So if there is anyone who knows of what is wrong or what to do or whether it should be returned to fix, which will be very useful.

    I thank everyone in advance.

    Happy new year :)

    Hello

    Well, I think that it of really difficult to say what is the reason. Maybe the recovery disk is noisy or the files corrupted it.

    At the moment, I can t imagine what it s a hardware problem because other windows drive work properly.

    In your case, I would try to install Windows 7 from a Microsoft disc and then see what happens. If it works properly and that you can install all drivers & tools you need to order a new drive Toshiba Recovery directly.

    Good bye

  • System restore using the recovery on Portege M200 CD

    Hi, I want to restore my M200 using the provided restore DVD. I have a Toshiba PA345U-1DV2 external USB DVD came with a CD that contains drivers for DOS. The Readme in the back driver's record is in Japanese! I created a boot SD card using the util of Toshiba and added the back drivers in the config.sys file.

    No matter what I try, I can't get the DVD USB boot DOS and so read the restore DVD. I admit that it is driving me crazy. I tried all the options I can find on the net and still no luck. Can anyone help?

    It seems to me that as the DVD drive is Toshiba and has drivers back it should work.

    As far as I know, you need a reader taken supported and compatible to recover form the USB.
    Not every player is compatible! :
    Please check this announcement on compatible drives:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9291&MessageID=32642

    In this ad, you will find instruction how to recover the operating system on the M200 protected without using the external drive:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11393&MessageID=41104

    And this announcement provides more interesting information on the recovery of the M200 procedure:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2798&MessageID=8348

    I hope I could help

Maybe you are looking for

  • How to remove clips on external drive with fcpx

    Hi all Using the latest version of fcpx.  I went to store stuff today in order to free up space on the external drive that contains all my data of fcpx. To do this, I deleted unused takes.  So I select a bunch of clips > right click > move to trash >

  • During the installation of the software is Unhandled Exception has occurred in your application

    Moose title: TRY to INSTALL the SOFTWARE to RECEIVE error MESSAGES! I get a Message that says: > "has an Unhandled Exception has occurred in your application, if you click on > continue Will ignore this error and attempt to continue, (Itried this > d

  • HP Pavilion dv5: find software

    After replacing the failed HARD drive, Device Manager indicates a problem with the search and installation of 'Controller of Bus SM driver software' and 'Data Acquisition and Signal Processing controller PCI'. You guys can help me solve these problem

  • MSN messenger code error 800488eb

    My messenger was working fine until I installed the protection of the family McAffe and McAffe Antivirus Plus. I just get this error. No one knows what settings should I change on McFee? I tried, but it did not work. If I try to connect via my e-mail

  • Windows 7 freezes after burning a compact flash and priming.

    Title of the Moose: the Compact Flash detection once started on any system using a specific application on Windows 7 Hi, I burned a compact flash tool & after burning, I used this compact flash for the start-up of a machine that uses only this compac