Need to manipulate the vector object - HELP

Screen shot 2013-01-25 at 1.34.02 PM.png

The vector image is the drop of oil on top.  I need to make it look like the image jpg below.  How do I do that?  I'm still new to AI and how to manipulate vector objects. I use AI CS3 on mac platform. Thanks in advance!

Hi AlieneGirl,

  1. Start by clicking on the anchor with the direct Selection tool
  2. Convert this anchor of point, so that you can have access to the handles (a corner point does not give access to the handles).

3. get the Convert Anchor Point Tool (SHIFT C) and click the inflection. This will allow you to move the direction handles independently.

4. slide now, just good handle downwards (see reference above)

5. now drag the handle on the left under the same angle in above reference

6. now drag a shade of yellow to the gradient panel to replace the orange you

7. now you must position the gradient - the best way to do this is to go to the gradient tool (just click letter G), and you will see the following slider change:

8 simply slip the hollow circle in the Middle a little bit to the right and down to reposition themselves in the center of your gradient. You can also set the cursor directly if you want to increase the brightness.

I hope this helps!

Tags: Illustrator

Similar Questions

  • I need someone on the phone to help me install acrobat standard dc

    I need someone on the phone to help me install acrobat standard dc

    Hi DAVID CHESLIN,.

    You can contact the customer service at the https://helpx.adobe.com/contact.html

    Kind regards

    Aurélie hamadi

  • The Vector.forEach () help

    Hello,http://help.adobe.com/en_US/AS3LCR/Flash_10.0/index.html?Vector.html &

    I have problems with the forEach on the class Vector method (http://help.adobe.com/en_US/AS3LCR/Flash_10.0/index.html?Vector.html &)

    He tries to explain it, but it's too complicated for my brain.

    In my .fla file, I have a vector filled with objects:

    var balls: vector. < DisplayObject > = new Vector. < DisplayObject > ();

    Vector objects are all of the same class, which has a draw() function.

    Now, I want to browse all items in the vector and call the function draw() on them. I thought I could do something like:

    balls.forEach (draw ());

    But is not float (I miss Ruby). I think I need to use the second parameter of the forEach method, but for the life of me I can't get there.

    I am forced to use a vector (as opposed to a table), because the other calls to the API require it.

    Thanks in advance,

    Tobias

    Try something like this - might work:

    var callDraw:Function = {function(item:T,_index:int,_vector:Vector._):void}
    //

    (as Object) .draw () / / could work

    (as DisplayObject) .draw () / / error - has no method to draw

    (as MovieClip) .draw () / / will work if MovieClip and has the draw method

    (as MyCustomClassOrInterfaceThatHasADrawMethod) .draw () / / work

    };
    balls.forEach (callDraw, null);

    NOTE: the signature of the function must have appropriate type declarations. i.e.

    function (element: MyCustomClassOrInterfaceThatHasADrawMethod, index: int, vector: Vector.)

    Post edited by: Raymond Basque

  • Need advice on the Vector Illustration

    I always make my more realistic illustrations. Could someone give me advice on how to improve this? I'm not yet done with her. Thank you.BeforeandAfter.png

    You could distort the logo a little bit on the shirt is more wavy.

    Add in each strand of hair to the beard, can help

    Start drawing the paths of light and shadow for the face, nose, mouth and eyes. Might as well make the Jersey as well.

    a little to clear up one of the corners on the hat.

    Overall I like how he's fine. Keep it up. (don't forget that my suggestions are just suggestions, it is the artist who is the final judge of the room)

  • need to install the windows sidebar - help?

    I recently downloaded a customized version of windows vista best suited for my computer, but it did come with the windows sidebar. whenever I try a search for windows sidebar, that I just get junk on install for XP but I need the sidebar which is compatible with vista and where to download. Help?

    Hi applesbananas

    This isn't an operating system that is supported by Microsoft.

    Thank you and have a nice day.
    Ken
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • New to the product and the need to know the basics. Help, please

    I'm new to the product, and we are evaluating. Here's investigations. I hope you can help me:
    1. does it support active/active or active/passive controllers?
    2. What is the minimum time of OTN of replication in asynchronous mode? The minimum data lost can I define?
    3 support for technology: hybrid, SSD, FC, SAS, SATA, 10 GBe?
    4. data protection / snapshot is supported?

    These questions refer to the NAS DELL products, please forgive me if I chose a bad TAGS.

    EqualLogic is active / standby (only 1 controller is online at any time).

    Minimum replication time is 5 minutes, unless you go the synchronous replication, but it should not be used over long distances (higher latency networks).

    EqualLogic's iSCSI only. For iSCSI 1Gbit units are all RJ45 ports. 10 Gbps units have RJ45 ports and ports of SFP +. You can connect the two, but only 1 port is used at a time (not sure how the new PS6210 only SFP + and the RJ45 failover because it has 2 of each on each controller).

    EqualLogic supports indeed of snapshots. With the host integration tools (available for Windows, VMware and Linux (some limitations on the new OS versions (mainly Windows 2012 R2 and RHEL 6.3 and later versions don't are not supported at this time exact (2014-01-22))) you can use the so-called chip-copies.) These IO quiesce to the volume before you say the table to take the snap. HITKIT Microsoft supports SQL, Exchange, Hyper-V, and I think that Sharepoint. I've personally used only the HITKIT with Hyper-V, but in Hyper-V lets it roll back a single virtual machine on a volume, even if there are several on the volume in question.

  • My vision is getting worse. How can I increase the font for windows? I mean the part of windows that love he menu bars, you need to select the items? Help

    My vision is getting worse, with difficulties to read the policy on menus.  I changed the resolution and changed the font size that does not affect the police in the menus, how to change that.  When I go to display and look at my make it 9 Sergie I want to increase that to a greater number how do I do that?  I believe that it will solve my problem.

    Hi Janice,.

    I understand that you want to increase the font size.
    Check out the following link and select Larger - 150% on the settings window.

    Make the text on the screen larger or smaller

    http://Windows.Microsoft.com/en-in/Windows7/make-the-text-on-your-screen-larger-or-smaller

    If this does not help, see the section "to create a custom DPI scale" link above.

    If you have additional questions, or if this problem persists, come in and we will be happy to help you.

  • BrowserField - pass the Connection object

    I want to make raw html in the user interface. I tried with browserfield, but in this case, I need to pass the Connection object.

    In my case I'm not any kind of connection, I have data html file in my project (eclipse).

    How can I create the connection object?

    Hello

    you want to analyze the raw html, which is wriitten in a text file (not URL)? In the affirmative. PM me. I can send the example file u...

  • Line of text well rolled on top of the vector form

    Hello!
    I know how to create a winding line of text using the pen and text attachment to the Path command. It's easy. BUT... What if I want to PLACE this text a little winding on a shape vector real, say an ellipse. What should be my workflow? As I do is... I first create a vector object, for example, ellipse. Then I create a text. Can I use the same way I described above (ie. Select two things with the SHIFT key then go to the text of attachment to the path). But the problem is... The vector object disappears! And all I have on the contrary is just a text well rolled on top where there USED to be the vector object.
    But I like to keep BOTH, the text and the object together. How this can be done?

    Duplicate your curvy object and then attach the text to the top in the list of layers.

  • I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

    I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

    Should be the subject of the file > open.  After the download.  The swatches will come with the file.

  • Need help to generate the name of the variable object timeout

    Below is a function that I use for scaling an object down and then hide it. It works fine on a single object, but if I try to run it on multiple objects at the same time, only the last object gets scaled down. I think it's because the timeout list never has one in this document, "ShrinkTimeOut."

    Each entity in the list of timeout needs a different name? And if so, how would I dynamically generate a name and save it so I can kill the timeout once the object object has reduced completely?

    > It looks like I'm getting rid of the timeout properly object in my code?

    Now that you say, and I have a glance, no - this isn't:
    not sure about the order of the parameters here:
    function fShrinkLoop (mModel, aTimeout) {}
    Creates a variable that contains the value of the model vector
    scale (vector (1,0000, 1,0000 1.0000)).
    nScaleVector = mModel.getPropRef("transform").scale;
    Check if the model is 1% or less to its original size.
    If (nScaleVector [1])<=0.01)>
    The model makes it invisible.
    mModel.visibility = symbol ("none");
    Kill the timeout object.
    aTimeout.forget ();
    } else {}
    If this isn't the case, further reduce US model and allow the loop to
    Repeat steps.
    mModel.scale (0.9);
    }
    }

  • Need help to "Bring order" of the graphical object in PDF format

    Hi all

    I work with a PDF writer and got stuck in a problem which is as follows:

    I have two rectangles that is written in the form S (stroke) and the second is a filled rectangle designated by B, two rectangles specification is as follows:

    0 0 0 RG

    0,936 w 1 J

    0 0 0 rg

    27.864 m 453.096

    27,864 453.096 453.096 27,864 v

    375.84 l 453.096

    375,84 453.096 453.096 375,84 v

    375.84 l 507.096

    375,84 507.096 507.096 375,84 v

    27.864 l 507.096

    27,864 507.096 507.096 27,864 v

    27.864 l 453.096

    S

    0 0 0 RG

    1 1 1 RG

    0 d 0 H

    0.7529 0.7529 0,7529 rg

    0.7529 0.7529 0,7529 RG

    70.344 452.16 515,304 165.384 re

    B

    As you can see the empty rectangle is drawn before the filled rectangle, but I need to be reversed I need to draw the rectangle filled first and then the rectangle empty then, this overlap does not hide the empty rectangle. So, is there a way I can achieve this?

    Thank you

    Pankaj

    The order of the objects in the content stream is the order that they are trained.

  • Need help to understand the DOM objects on host VSAN MDs

    I read the info that I could find on the disk objects (including best practices guide & blog of Cormac), but fail to wrap my head around why I see what I see.

    I have a motorized on VM (cvf1-wshark), who lives on a VSAN 3 nodes cluster. Each node has 1 SSD and 4 MD I uses all of the default policies (FTT, bandwidth, etc.).

    That said, I wonder why it is clear from the exit of the vsan.disk_object_info of order RVC who live on 3 of my knots VSAN VM objects. vSphere client shows the correct RAID0 between 2 hosts (13.21 & 13.23) mirroring a witness (13.22), but the DOM objects on 13.22 aren't cookies (which I don't expect to see objects anyway). So, what do these objects on 13.22? I see the same distribution for each of my virtual machines on this cluster.

    Thank you

    Steve

    Screen Shot 2014-04-15 at 11.07.48 AM.png

    Screen Shot 2014-04-15 at 11.08.03 AM.png

    ################

    13.21

    ################

    / localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7fb701ab6548453137d63

    2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.21 (may take a moment)...

    2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.23 (may take a moment)...

    2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.22 (may take a moment)...

    2014-04-15 14:44:08 + 0000: does get disc info VSAN

    NAA.600605b006f7fb701ab6548453137d63 (52098356-69da-4ab9-b03f-11eea6025370) physical disk:

    The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: directory of Namespace

    Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    RAID_1

    Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: * naa.600605b006f7fb701ab6548453137d63* *, ssd: naa.600605b006f7fb701abde07e0de6c455)

    Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

    The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk

    Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    RAID_1

    Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: * naa.600605b006f7fb701ab6548453137d63* *, ssd: naa.600605b006f7fb701abde07e0de6c455)

    Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

    ################

    13.22

    ################

    / localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7dae01ab65f7317f942d1

    NAA.600605b006f7dae01ab65f7317f942d1 (5226984a-510a-dab6-86c0-1950f37a4ee2) physical disk:

    The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: directory of Namespace

    Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    RAID_1

    Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

    Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

    The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk

    Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    RAID_1

    Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

    Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

    ################

    13.23

    ################

    / localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7f9701ab604452752b6b4

    NAA.600605b006f7f9701ab604452752b6b4 (52cd5b55-c160-3fd8-2285-cfadc7b5d11e) physical disk:

    The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: directory of Namespace

    Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    RAID_1

    Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

    Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: * naa.600605b006f7f9701ab604452752b6b4* *, ssd: naa.600605b006f7f9701abe00d3102940d7)

    The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk

    Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    RAID_1

    Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

    Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: * naa.600605b006f7f9701ab604452752b6b4* *, ssd: naa.600605b006f7f9701abe00d3102940d7)

    Yep - it is a quite normal output.

    As Duncan suggests above, your poster only the same information each time your run of the command.

    And each object is composed of 3 elements (2 x replicas of RAID-1 + the witness).

    The other thing to watch is that this command is more information that you have requested, i.e. all components. However, components that are active for the disc that you put as an argument to the command are going to be wrapped in * double Asterix *.

    For example:

    The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

    Context: Part of VM cvf1-wshark: directory of Namespace

    Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)

    HTH

    Cormac

  • Need help with the vector

    Hello friends,

    Is it possible to control the thickness of vector line feature in indesign using javascript? Thanks in advance.

    Kind regards

    Kitty

    Don't worry Kitty.

    The workflow that I use for vectors in InDesign is open the Illustrator file, copy the vector and paste it into InDesign (not upgrade), then you have all the options open to you inside InDesign, since it is now a vector of InDesign (you can do everything via script as well).

    I understand that this is not what you do so Uwe tips will be the best for you I think. Good luck!

    Brett

  • Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

    Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

    You will need to find a forum for MS Word, since it is the software you are trying to manipulate in the present.  If you think that the treatment/creation of the PDF file plays a role, then you should ask in the forum for the software that you use to create the PDF file.

    This forum is for a question about downloading and installing Adobe products test, so in all circumstances, your question does not fit in this forum.

Maybe you are looking for