Need to model for the XR-2206 function generator chip

Similar Questions

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• Satellite 1000-Z2: I need a driver for the display and the LAN

  Hello

  I reformatted my laptop S1000-Z2, and I have a real problem trying to find all the information about this model!

  Basically, I need a driver for the display and the LAN?

  Best regards

  Austin.

  What operating system do you use?
  If you use XP, you will not find the network on the site recommended driver driver!
  I can't give you advice where to find such driver because I don t know what the LAN card is installed in your oldie.

  But why you n t check yourself? Try to know what the LAN card you use and googel a bit for compatible applications ;)

• How to create a model for the description of the product

  I need to make a model for the description of the product as well as the products have the same space and information.

  Select it and save it as a library item. Then you can re - use it as often as you want and on as many sites as you want.

• Satellite M30X-165 - need a driver for the PCI Flash memory

  Hey,.

  I need a driver for the PCI Flash memory, I have already searched the web and posted in other Forums, but I can't find anything. I heard he is hidden somewhere in another file... ? !
  I have a toshiba sm30X-165

  I would be very happy if someone can help me!

  Kind regards

  Freddy

  Drivers for Satellite M30X are placed in the archive on the European driver Toshiba page.
  Product type choose Archive.
  Then the Satellite-> Satellite M-> Satellite M30X

  There, you must download and install the Cardbus and Chip Set Utility driver

• Need a driver for the gforce 6400 ultra 128 MB graphics card

  Original title: find a driver

  Hello

  I need a driver for the gforce 6400 ultra 128 MB graphics card.

  know of anyone who has this?

  TNX for help

  Hello

  Take a look in the manufacturer's website:

  http://www.nvidia.in/page/GeForce6.html

• Need help now for the live installation

  Need help now for the live installation

  Hello

  As described in the question, I understand that you need help. I will definitely help you however, I would be grateful if you could help me with more information to better understand the problem and resolving it.

  1. What is the problem you are experiencing during installation?

  2. That you install? Any software or operating system?

  3. How you try to install the software/Os/application?

  If you need live support from Microsoft then you can click on the link given below and check if it helps.

  https://support.Microsoft.com/en-us/contactus/

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

• Hey everyone if I use photoshop mixture do I need to pay for the cloud

  Hey everyone if I use photoshop mixture do I need to pay for the cloud

  Laughing out loud

• I chose a model for the free partner site but want to change it for another

  I chose a model for the free partner site but want to change it for another. Anyway it's possible and start over? Searched for hours for this problem and kinda got frustrated and deleted most of the code...

  Oh, that, no. You would have to create a free trial site and files of port above them to replace this place of free trial.

• Calculate the fastest path between 2 nodes with the data model for the Oracle network

  Hi all,
  
  I have Oracle 10 g 2.
  
  My problem is the following:
  
  I created a network named ITALIA_NET in the data model for the Oracle network.
  The table of links of this network is named: ITALIA_NET_LINK$.
  The table of the nodes of this network is named: ITALIA_NET_NODE$.
  
  The table ITALIA_NET_LINK$ contains a field named COST that contains links (in meters) lengths.
  
  I've already calculated the SHORTEST PATH between two nodes of the network, by using the method of shortestPath() (using the Java API) as shown on "Pro Oracle Spatial for Oracle Database 11 g" manual. Infact, this method makes reference to the COST field for $ ITALIA_NET_LINK to make this calculation.
  
  Now, I want to calculate the FASTER PATH between two nodes of the network. I have the links (in hours) travel time to make this calculation.
  
  My idea is to create a new field in ITALIA_NET_LINK$ named Cost2 containing the travel time from the links and then do the math by using the shorthestPath() method, referring to the Cost2 field to $ ITALIA_NET_LINK COST field instead.
  By default, I know that the shorthestPath() method returns the COST field for $ ITALIA_NET_LINK. Is possible to change this setting and do that this method refers to the Cost2 field?
  
  In the alternative, is another way for the calculation of the fastest way?
  I want to leave the creation of another network as last solution, because I will have other costs of field (Cost3, cos4t,...)
  
  Thank you much in advance.

  Your approach is good. You will have two networks and you can read them in memory and analyze of shortest path. The shortestPath method is static for the class of NetworkManager. You can use the same method for both networks, once they are read into memory.

  ...
  read the network with time as cost of link
  NetTime network = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_TIME');
  read the network length as cost of link
  Network netLength = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_LENGTH');

  calculate the quickest way
  PathTime path = NetworkManager.shortestPath (netTime, startNodeID, endNodeID);
  calculate the shortest path
  PathLength path = NetworkManager.shortestPath (netLength, startNodeID, endNodeID);
  ...

  In the future, if you upgrade to 11g, network data model provides a load on demand (LOD) API that loads only the scores of necessary network in memory during the analysis. This command removes the restriction of the memory of the 10g (in memory API you use) API. API of LOD can handle very large networks and offers more features analysis and modeling capabilities.

  The following link contains the tutorial of NDM LOD API ready for download. Just for your information.
  https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

  Kind regards
  Jack

• How can I access the recipient "subordinate" in the expressions for the participant to ApprovalTask generator type "by the expression" value?

  Hello

  How can I access the recipient "subordinate" in the expressions for the participant to ApprovalTask generator type "by the expression" value?

  I can access some details of the beneficiaries of the workload, but how to access direct subordinates?

  TIA

  Leo

  Well, as I said, if you need to get a list of all rollover (for whatever logic you have), making calls to IOM to find the list of users whose Manager is the person in your composite.

  Sorry if I am wrong again.

• Satellite R630-13U - driver need for the WLAN/BT function key

  Dear Sirs,

  I have problem with my Toshiba Satellite R630-13U

  I have not found any driver for the wireless hot key windows 7 pro 32-bit to be able to turn on/off the wireless or Bluetooth.

  Thank you

  Ayman

  You need to install additional package from Toshiba. Several different tools, this package, and one of them is utility of Flash cards.

  Please install, test and post comments.

• Migration of models for the new Machine...

  Hello dear colleagues,

  I put out of service from a dated 2009 iMac and passing his duties to a new and I wonder if someone can help me find a reference who will help me get my animation models fly over and correctly placed on the new machine for FCPX discovered / recognizes their and their associated media? I intend to copy the files and place them in (user) / films/motion templates/generators /... but have you done this before? If so, the pointers?

  I'll check in and share what I've learned once I have set things.

  Thank you

  Eric D - CoralVision

  Copy the (user) > movies > folder models of animation as a whole on the new computer.

  This only works with free templates and those that you made yourself.

  Third party models with their own Installer are not in these files, and you will need to re-run the installation program.

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• Need software/drivers for the Cam MiniDV DCR-TRV25

  I have owned one of these great little cameras Sony miniDV since 2003 - in fact I love it so much, I bought a 'reserve' on ebay a few months ago.

  The problem is when my laptop crashed, I lost the initial load of the original factory driver for the camera software... and I can't find the original anywhere drive. None of my web searches have found links to reload the driver.

  Even more amazing, I started using Sony Vegas Movie Studio clean - but it plain refuses to import video from his OWN camera - saying that it does not recognize the device.

  What are my options and alternatives for this?

  NC to LB, CA

  Hello. For your computer to recognize the device, if it was recognized before, would mean that either your use of Windows XP or an older operating system. Unfortunately, USB streaming is not supported by Windows Vista, Windows 7 and Mac. But using a different connection: IEEE1394 (i.link or firewire) connection it should work with these operating systems. Going up that probably you just need to install the driver for the camera, you should be able to get it here:

  http://eSupport.Sony.com/us/Perl/SWU-Li... l = DCRTRV25

  Select your operating system from the menu drop down and download and install the device driver (Driver USB for Connection). Make sure that the camcorder is not connected to your computer while installing the driver. Follow the instructions below the USB driver for the login page properly install the driver. Restart the computer and connect the camcorder. Complete the installation of new hardware found. Also make sure that your camcorder USB Stream function is set on IT. Use the application pre-installed Windows Movie Maker or compatible video capture software to capture video to off the Strip. I hope this helps.