Need to record recovery or emergency with HP Pavilion 2291ea Notebook PC g6 (Urgent help required!)

Similar Questions

• Integrated with HP Pavilion dv9715nr notebook PC webcam problem

  Hello everyone,

  I hope someone can help point me in the direction of a fix of webcam for the problem that my laptop has developed. I spent the last few days browsing the internet looking for a solution to what seems to be a widespread problem, but with no satisfactory solution.

  The problem:

  A few days ago my integrated webcam works with Youcam and other applications of webcam with the message 'not found webcam' or 'Please turn on integrated webcam. Dutifully, I went to the device manage and felt that there was no imaging device listed.

  Related problems:

  In addition to this problem, I sometimes get an installation of an unknown USB device. This device is, I'm sure that the webcam, but try as I might I cannot point to the drivers of webcam or update its driver to something other than the best driver that is already.

  What I've tried so far:

  -Reinstall the drivers from the HP website. None of the many different types of pilot managed to bring the webcam life or showing in imaging devices.

  -Follow-up guide HP for the problems of webcam that ends up pushing me towards contacting HP help desk. Which, I imagine, will cost you a lot more money than the I have no money.

  -Uninstall all usb devices and reinstall using scan for the hardware changes. This has, once or twice, brought back the web cam and imaging device and worked for a while. However, before I can update its drivers computer freezes and turns itself off.

  -Flashed the bios. No change.

  -Downloaded the drivers from various other cam as suggested in the huge amount of bugs, there are online for this problem. Unfortunately, none of them worked.

  -Recovery plant recovery drive. The webcam is still missing in the imagery of the Device Manager section.

  Technical specifications:

  HP Pavilion dv9715nr notebook PC

  Vista 32 bit premium - service Pack2

  AMD Turion Mobile Technology TL-60 2.00 GHz Dual Processor

  1.94 GB OF RAM

  BIOS F.33, 3.09 M

  Webcam integrated into the lid of the laptop.

  Demand:

  If I understand the large amount of online discussion on what is a common problem and I hope that, among the pages and pages of bugs I looked, I missed a fix somewhere.

  If you have had and solved the problem, or if you have an idea how to sort it out, I'd love to hear from you.

  Edmonds (not Christmas)

  Hello again,

  First of all, let me thank the support forum HP for all their advice and now down to business.

  After a week of problems webcam and extensive research on the internet for a fix for the problem that I finally managed to get my webcam - however, I'm not sure how I did it.

  Below is a step by step guide.

  • Become very frustrated.
  • Buy some alcohol
  • Drinking alcohol and try every difficulty in the following two web pages.
  • http://www.PlanetAMD64.com/lofiversion/index.php?t31194.html
  • http://Forum.NotebookReview.com/HP-Compaq/149463-webcam-problem-solved-fingers-crossed-heres-hoping.html
  • At some point during the evening, a HP pavilion webcam appeared, but was very maintained code.
  • Give up, turn off the computer laptop and pass out.
  • Laptop start up the next day and find work and rear HP webcam.

  Now, I know that's not exactly the most empirical of bugs, however, it worked for me. From what I remember last night, the key points seem to be the following. If I insist I was very drunk and I tried almost every difficulty in the two websites above. (The bullet points below are not related)

  • Installation of a very old version of Quickplay.
  • Install the drivers from the DPinstall32.exe.
  • Get a webcam driver update Ricoh are displayed in windows update.
  • Go to Panel configuration/program and using change to the webcam repair and modification.
  • Play with the Services Windows Image acquisition.

  There was, no doubt, many other things I've done and, quite frankly, I am surprised that I did not kill my laptop I did most of them at the same time. However, the webcam is back and running so I recommend drunken stupidity and perseverance as key elements of this fix.

  Finally, somewhere in the two threads I linked will be your fix. There are a lot of different patches so keep and you can do with one of them.

  Good luck. Mines a pint of the black stuff.

  Edmonds (not Christmas)

  Edit - Add the WIA service.

• problem connecting push2tv3000 with HP Pavilion dv7 Notebook PC QD977UA #ABA

  Bought the ptv3000 and the widi recognizes the adapter and I can put in the security code, however when I click on connect the widi tv window will specify the connection to the device display wireless for a few moments and then window widi intel says "it has not detected adapters. Click the button below to perform a new analysis.  The ptv3000 reappears and goes through the stage of connection again but does not connect.

  I have updated with the latest drivers intel WiDi and the ptv3000 of netgear for the latest firmware but still will not connect.

  If someone knows the question I would be very happy because I think it would be a very good product if it works, unfortunately, netgear did not much help

  If it works when the firewall is disabled, not when the firewall is turned on, then I recommend contacting the firewall provider.  I recommend you contact the firewall vendor as each firewall is different in some way, and I'm not too familiar with this brand.

• How can I Zoom with my Pavilion dm4 notebook cam?

  Have any tool of zomm with my pc laptop cam pailion dm4?

  Hello

  Basically, we cannot do this on hardware, use the software, please try this:

  http://www.BrotherSoft.com/Downloads/Zoom-webcam.html

  Merry Christmas.

• Win 7 problems with HP Pavilion dv4140EA notebook PC

  Hello

  Years, I was the proud owner of a HP Pavilion dv4140EA PC laptop. Last week, I installed a system Windows 7 Home Premium operating in my machine. Thus, some functions stopped working - especially I can't connect to the Internet because the machine does not recognize the wireless device or cable device. Consultation of the "Device Manager" application revealed that the drivers for the following devices are missing: video controller, mass storage controller, multimedia audio controller and network controller.

  Please send me the relevant drivers or advise me on other ways to make my computer thanks to the new operating system function.

  Thank you

  RS

  Great! It all works now. Thank you very much!

• I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

  I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

  How much it costs

  I need to perform a recovery for ssd only

  I need direct link for that

  Nice day.

  He was never a way I know of to download games Windows OEM Lenovo recovery disks. That the process is managed by Service, you'll need to contact them directly (see info below). If I understand correctly, they will confirm your OS by checking the serial number of your machine.

  I hope this helps.

  Kind regards.

• For all the records for each record double, I need to get a single column with null or 0.

  Hi all

  I have a requirement where I need to get all the records, for each record in double, I need to get a single column with null or 0.

  create table a1

  (

  Identification number,

  VARCHAR2 (100), the point

  part varchar2 (100));

  Insert into a1

  values (1, 'ABC', 'A1');

  Insert into a1

  values (2, 'DEF', 'A2');

  TABLE A

  PART ITEM ID

  1 ABC A1

  1 ABC A1

  1 ABC A1

  DEF 2 A2

  DEF 2 A2

  3 DEF A2

  O/P

  PART ITEM ID

  1 ABC A1

  1        ABC             0

  1        ABC             0

  DEF 2 A2

  2       DEF              0

  3       DEF              0

  Thanks in advance.

  Thanks for your help FrankKalush...

  This one will work.

  WITH got_r_num AS

  (

  SELECT NVL (a1.id, a1.id) as id

  NVL (a1.item, a1.item) AS element

  NVL (a1.part, a1.part) IN the framework

  a1.id AS a_id

  ROW_NUMBER () OVER (PARTITION BY a1.id

  ORDER BY NULL

  ) AS r_num

  BY the a1

  )

  SELECT id

  element

  CASE

  WHEN a_id IS NOT NULL

  AND r_num = 1

  THEN part

  ELSE ' 0'

  END in the framework

  OF got_r_num

  ;

• I need mx records

  Hi, I have recently finished my subsscription with one.com domain and to cancel, I lost my email that I greeted with Thunderbird. I contacted field society, and they said to use my old email address I need MX records. I asked one.com and they say there is nothing they can do that the domain is cancelled. I need the email address because it's what I use for my business. Where can I get the MX records, then should I reuse my old name of e-mail?

  If you still have the domain? It's a good start.

  MX records give mail senders address entering your e-mail service provider.

  It seems that your old domain registrar provided mail service (that is, he received the mail for you sent mail to you and hosted your mailbox for you) and another does not.

  Since you have already cancelled your service with the former e-mail provider, from the old MX records will result in all your mail be delivered - it will be rejected by your former provider. They will allow you to reactivate your subscription and restore your email (deleted?)?

• HP Jet 7 - 5709: need to reinstall Windows 8.1 with Bing

  Hello

  How to reinstall Windows 8.1 with Bing on my Tablet? I have the OEM key I need to reinstall with, but when I try to reinstall Windows 8.1 (standard) he says that the key is not to this version of Windows. I need to find Windows 8.1 with the Bing installation media?

  Hello

  Unfortunately your key will not work for 8.1 with Bing and is only available through oem (HP) - you will need to order recovery media from the link on your Product Page.

  Kind regards

  DP - K

• HP Pavilion dv7-6185us: Hi there, I need the recovery for HP Pavilion dv7 Notebook PC Manager

  Hi there I accidentally erased my recovery disk and I would go back to the original factory condition because im having a lot of problems with the windows 10 'upgrade '. can you please send me a link to get it?

  Hello

  You will need to use your recovery media to reinstall Windows 7 - a guide on the use of this media to reinstall Windows is on the document below.

  Performing a recovery of the system - Windows 7.

  If you do not have this, see if you can still order it at HP on the link below.

  http://support.HP.com/us-en/mediaorder/HP-Pavilion-dv7-6100-entertainment-notebook-PC-series/5082216/model/5128864/softwareitem/658854-001/STEP1

  If it is no longer available at HP, you can always order this media the 3rd dealer part on the following link.

  http://www.computersurgeons.com/p-21335-Windows-7-64B-recovery-kit-658854-001-for-HP-Pavilion-entertainment-notebook-PC-model-number-dv7-6185us.aspx

  Kind regards

  DP - K

• How can need to order recovery disks, I know if I need to 32 or 64 bits without BONES?

  I'm trying to fix someones laptop.  It's a g60 and they have no recovery disks.  The hard drive broke down so I can't use windows to find out if I need a 32-bit or 64-bit version.  HP Web site cannot determine this by model number, series or whatever it is and wonder which version I need when I try to order recovery disks.  He told me I should use windows to understand this.  (Why do I need to order recovery disks, if windows still worked?)  Anyway. Any help would be appreciated. Thank you.

  Specification of page States it comes with Windows 7 64 bit:

  http://support.HP.com/us-en/document/c02033076

• need to record the data every second

  Hello

  So far so good with writing this simple .vi. I just have a problem. I need to record data every second. I use FieldPoint for thermocouple output signals. MAX is reading everything very well (I'm ambient recording, it is fondant between 80-83, so I put my stop for 83) and I can usually run the program for 5-10 seconds before my structure case is set to false and stops the .vi. When I open the file, I get data decimated. I tried a delay time and always the same. Not only she is decimated, but it does not record every second but between 5 to 10 seconds.

  How can I fix?

  .VI attached as well as the data element

  Thank you very much

  
  

• How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  You will need to go on the manufacturer of your pc and then ask for a windows xp disk and drivers. This will give you a new copy, but not out of the box state. For an out of the box, get a recovery disk. Just answer what you want.

• I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Two points:

  1. it is unlikely that your current installation would work if
  you have changed motherboards. You need to reinstall itself.

  2 but you cannot use your current copy of Windows if you change
  motherboards, not even if reinstall you it cleanly. The largest
  disadvantage of an OEM version, is that its license it binds permanently
  the first computer, it is installed on and Microsoft believes that
  If you change the motherboards, another computer. It can never
  legally be moved to another computer, sold or transferred (except with)
  the original computer). If the computer dies or is stolen, your
  license dies with him.

  Ken Blake, Microsoft MVP

• Matching records between 2 tables with duplicate records

  Hi all

  I need help in what follows.

  I have 2 tables Received_bills and Send_bills.

  -------------------------------------------------------

  -The DOF for Table SEND_BILLS

  --------------------------------------------------------

  CREATE TABLE SEND_BILLS

  (DATE OF "DATUM",

  NUMBER OF "PAYMENT."

  'CODE' VARCHAR2 (5 BYTE)

  )  ;

  --------------------------------------------------------

  -The DOF for Table RECEIVED_BILLS

  --------------------------------------------------------

  CREATE TABLE 'RECEIVED_BILLS '.

  (DATE OF "DATUM",

  NUMBER OF "PAYMENT."

  'CODE' VARCHAR2 (5 BYTE),

  VARCHAR2 (5 BYTE) 'STATUS' )  ;

  INSERTION of REM in RECEIVED_BILLS

  TOGETHER TO DEFINE

  Insert. RECEIVED_BILLS (DATUM, PAYMENT, CODE, STATE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1', 'SUCCESS');

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 'A5', 'SUCCESS', 25);

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 47, 'A4', 'FAILED');

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1', 'FAILED');

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1', 'SUCCESS');

  INSERTION of REM in SEND_BILLS

  TOGETHER TO DEFINE

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 25, 'A5');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 47, 'A4');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('09-OCT-15','DD-MON-RR'), 19, 'A8');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 20, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 25, 'A5');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 25, 'A5');

  I match all records of send_bills and received_bills with a status of 'SUCCESS' There is no single column in the table.

  Correspondence held payment of columns, the code and the scratch cards, but it may also duplicate records. But even if there are duplicates, I also need those records in the query results

  the query I wrote is this:

  SELECT SEND.*

  REC received_bills, send_bills send

  WHERE send.datum = rec.datum

  AND send.payment = rec.payment

  AND send.code = rec.code

  AND 'rec.status =' SUCCESS

  ;

  The query results give me this

  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	25	A5
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	25	A5

  The result of the correct application would be

  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	25	A5
  OCTOBER 10, 15	19	A1

  The select statement that I need I want to use a loop to insert records in another table.

  Can someone help me please?

  Thanks in advance.

  Best regards

  Caroline

  Hi, Caroline.

  Caroline wrote:

  Hi all

  I need help in what follows.

  I have 2 tables Received_bills and Send_bills.

  -------------------------------------------------------

  -The DOF for Table SEND_BILLS

  --------------------------------------------------------

  CREATE TABLE SEND_BILLS

  (DATE OF "DATUM",

  NUMBER OF "PAYMENT."

  'CODE' VARCHAR2 (5 BYTE)

  )  ;

  --------------------------------------------------------

  -The DOF for Table RECEIVED_BILLS

  --------------------------------------------------------

  CREATE TABLE 'RECEIVED_BILLS '.

  (DATE OF "DATUM",

  NUMBER OF "PAYMENT."

  'CODE' VARCHAR2 (5 BYTE),

  VARCHAR2 (5 BYTE) 'STATUS');

  INSERTION of REM in RECEIVED_BILLS

  TOGETHER TO DEFINE

  Insert. RECEIVED_BILLS (DATUM, PAYMENT, CODE, STATE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1', 'SUCCESS');

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 'A5', 'SUCCESS', 25);

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 47, 'A4', 'FAILED');

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1', 'FAILED');

  Insert into RECEIVED_BILLS (PAYMENT, CODE, DATE, STATUS) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1', 'SUCCESS');

  INSERTION of REM in SEND_BILLS

  TOGETHER TO DEFINE

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 25, 'A5');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 47, 'A4');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('09-OCT-15','DD-MON-RR'), 19, 'A8');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 20, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 19, 'A1');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 25, 'A5');

  Insert into SEND_BILLS (DATUM, CODE) values (to_date('10-OCT-15','DD-MON-RR'), 25, 'A5');

  I match all records of send_bills and received_bills with a status of 'SUCCESS' There is no single column in the table.

  Correspondence held payment of columns, the code and the scratch cards, but it may also duplicate records. But even if there are duplicates, I also need those records in the query results

  the query I wrote is this:

  SELECT SEND.*

  REC received_bills, send_bills send

  WHERE send.datum = rec.datum

  AND send.payment = rec.payment

  AND send.code = rec.code

  AND 'rec.status =' SUCCESS

  ;

  The query results give me this

  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	25	A5
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	25	A5

  The result of the correct application would be

  OCTOBER 10, 15	19	A1
  OCTOBER 10, 15	25	A5
  OCTOBER 10, 15	19	A1

  The select statement that I need I want to use a loop to insert records in another table.

  Can someone help me please?

  Thanks in advance.

  Best regards

  Caroline

  Want to get answers that work?  Then make sure that the CREATE TABLE and INSERT statements you post too much work.  Test (and, if necessary, correct) your statements before committing.  You have a stray "." in the first INSERT statement for received_bills and receikved_bills.status is defined as VARCHAR2 (5), but all values are 6 characters long.

  There are 5 lines in send_bills that are similar to the

  10 OCTOBER 2015 19 A1

  Why do you want that 2 rows like this in the output, not 1 or 3, or 4 or 5?  Is it because there are 2 matching rows in received_bills?  If so, you can do something like this:

  WITH rec AS

  (

  SELECT the reference, payment, code

  , ROW_NUMBER () OVER (PARTITION BY datum, payment, code)

  ORDER BY NULL

  ) AS r_num

  OF received_bills

  Situation WHERE = 'SUCCESS'

  )

  send AS

  (

  SELECT the reference, payment, code

  , ROW_NUMBER () OVER (PARTITION BY datum, payment, code)

  ORDER BY NULL

  ) AS r_num

  OF send_bills

  )

  SELECT send.datum, send.payment, send.code

  REC, send

  WHERE send.datum = rec.datum

  AND send.payment = rec.payment

  AND send.code = rec.code

  AND send.r_num = rec.r_num

  ;

  Note that the main request is very similar to the query you posted, but the last condition has changed.

  If you need to insert these lines in another table, you can use this query in an INSERT statement. There is no need of a loop, or for any PL/SQL.